Spatiotemporal distribution and human health risk assessment of potential toxic species in soils of urban and surrounding crop fields from an agricultural area, Córdoba, Argentina.

The spatiotemporal distribution of potentially toxic species was studied in the topsoil of parks, playgrounds, and surrounding crop fields of Marcos Juarez City in Córdoba province, Argentina. The content of available metals and of some pesticides used in the region was determined. The mean values of available metal concentrations in all samples, expressed in mg kg-1, were 7.99 ± 6.58, 0.89 ± 0.71, 0.35 ± 0.26, and 1.50 ± 1.40 for Pb, Cr, Cd, and Ni, respectively. Pearson's correlation coefficients, coefficient of variation (%), and principal component analysis were used to explore whether variations in metal content were associated with anthropogenic factors. Agrochemicals such as lindane, chlorobenzilate, endosulfan, endrin, permethrin, and chlorpyrifos were found in crop field soil samples. In turn, chlorothalonil, chlordanes, methoxychlor, DDT, permethrin, and chlorpyrifos were detected in park and playground soil samples. The degree of pollution with possible effects on environmental health was evaluated using the Nemerow integrated pollution index (NIPI) and the modified degree of contamination (mCd). In some campaigns, the values obtained from crop fields ranged from low to high pollution levels during periods of agrochemical application. Noteworthy, in periods of low agrochemical application in crop fields, a high level of pollution was observed in parks and playgrounds. For children, the hazard index (HI) values were higher than the threshold value of 1, suggesting a potential health risk. This study provides valuable information regarding land management practices and highlights the importance of monitoring and implementing policies to reduce human health risks.

Flow injection biamperometric determination of captopril.

An automated method to determine captopril (1-[(2S)-3-mercapto-2-methylpropionyl]-L-proline) is proposed. A flow injection manifold based on the indirect biamperometric detection of the captopril by using Fe(III)/Fe(II) as an indicating redox system and a Z-shaped flow-cell configuration, was developed. The calibration curve is linear over the range 0.03-3.6 microg ml(-1) of captopril. The relative standard deviation for the determination of 0.76 microg ml(-1) of captopril is 0.97% (n = 12) and the sample throughput is 69 h(-1). This method was applied to the determination of captopril to commercially available pharmaceutical preparations.

Validation of a continuous flow method for the determination of soluble iron in atmospheric dust and volcanic ash.

Iron is an essential micronutrient for phytoplankton growth and is supplied to the remote areas of the ocean mainly through atmospheric dust/ash. The amount of soluble Fe in dust/ash is a major source of uncertainty in modeling-Fe dissolution and deposition to the surface ocean. Currently in the literature, there exist almost as many different methods to estimate fractional solubility as researchers in the field, making it difficult to compare results between research groups. Also, an important constraint to evaluate Fe solubility in atmospheric dust is the limited mass of sample which is usually only available in micrograms to milligrams amounts. A continuous flow (CF) method that can be run with low mass of sediments (<10mg) was tested against a standard method which require about 1g of sediments (BCR of the European Union). For validation of the CF experiment, we run both methods using South American surface sediment and deposited volcanic ash. Both materials tested are easy eroded by wind and are representative of atmospheric dust/ash exported from this region. The uncertainty of the CF method was obtained from seven replicates of one surface sediment sample, and shows very good reproducibility. The replication was conducted on different days in a span of two years and ranged between 8 and 22% (i.e., the uncertainty for the standard method was 6-19%). Compared to other standardized methods, the CF method allows studies of dissolution kinetic of metals and consumes less reagents and time (<3h). The method validated here is suggested to be used as a standardized method for Fe solubility studies on dust/ash.

New automatized method with amperometric detection for the determination of azithromycin.

A FIA-amperometric method for azithromycin determination was developed. A working glassy carbon electrode and a Ag/AgCl/NaCl (3M) reference electrode were used. The determination is based on the electrochemical oxidation of the azithromycin at 0.9V in Britton-Robinson buffer solution (pH 8.0). Due to the adsorption of the reaction products on the electrode surface, an effective cleaner cycle was implemented. By using the optimum chemical and FIA conditions, a concentration linear range of 1.0-10.0mgL(-1) and a detection limit (LOD) of 0.76mgL(-1) are obtained. The method was validated and satisfactorily applied to the determination of azithromycin in pharmaceutical formulations.

Enzymatic reverse FIA method for total phenols determination in urine samples.

A reverse flow injection spectrophotometric enzymatic method is proposed to quantify total phenols in urine samples. The polyphenol oxidase (PPO; EC 1.14.18.1) obtained as a crude extract from sweet potato root (Ipomoea batatas) was used as enzymatic catalyze. The detection limit, the sample throughput and relative standard deviation were 7.7mgl(-1) of total phenols, 49h(-1) and 0.9%, respectively. The method was applied to real samples and a recovery study was carried out in order to its validation.

Determination of phenol, resorcinol and hydroquinone in air samples by synchronous fluorescence using partial least-squares (PLS).

The determination of phenolic compounds is of great importance owing to their high toxicity. Some of them are present in tobacco smoke and it is important for their monitoring in air of closed room. A simple, rapid and sensitive method was developed for simultaneous determination of hydroquinone, resorcinol and phenol in this kind of samples. Synchronous fluorescence technique was used and the data were processed by using the partial least-squares (PLS) chemometric algorithm. The concentrations for experimental calibration matrix were varied between 0.02 and 0.2 mg L(-1) for hydroquinone, between 0.05 and 0.6 mg L(-1) for resorcinol and between 0.05 and 0.4 mg L(-1) for phenol in accordance with the national legislation. The cross-validation method was used to select the number of factors. To check the accuracy of the proposed method a recovery study on real samples was carried out.

Flow injection analysis: Rayleigh light scattering technique for total protein determination.

A novel flow injection analysis (FIA) method with Rayleigh light scattering (RLS) detection was developed for the determination of total protein concentrations. This method is based on the weak intensity of RLS of bromothymol blue (BB) (3',3"-dibromothymolsulfonephthalein) which can be enhanced by the addition of protein in weakly acidic solution. A common spectrofluorimeter was used as a detector. It was proved that the application of this method to quantify the total proteins in real samples by using bovine serum albumin was possible. The RLS signal was detected at lambda(ex)= lambda(em)=572 nm. The linear range was 7.0-70.0 microg mL(-1), the detection limit was 3.75 microg mL(-1), the reproducibility was 5.5% (n=7), and the sample throughput was 26 h(-1).

A sensitive spectrophotometric method for lead determination by flow injection analysis with on-line preconcentration.

A new flow injection (FI) system for the determination of Pb(II) at trace level with a preconcentration step and spectrophotometric detection is proposed. It is based on preconcentration of lead ions on chitosan and dithizone-lead complex formation in aqueous medium (pH 9). The chemicals and FIA variables influencing the performance of the system were optimized and applied to the determination of lead in natural, well, and drinking water samples. It is a simple, highly sensitive, and low cost alternative methodology. The method provided a linear rage between 25 and 250mugl(-1), a detection limit of 5.0ngml(-1) and a sample throughput of 15h(-1). The obtained results of spiked samples are in good agreement between the proposed method and ICP-AES.