RESUMEN
We demonstrate a seamless and contactless method from protein crystallization to X-ray analysis using a microfluidic chip with the aim of obtaining a complete crystallographic data set of a protein crystal under cryogenic conditions. Our microfluidics-based approach did not require direct manipulation of the protein crystal. Therefore, the microfluidic chip approach is suitable for novices of X-ray analysis of protein crystals. We also investigated the effect of stepwise cryoprotection on the quality of protein crystals. Protein crystals with cryoprotection via on-chip manipulation did not show deterioration of crystallographic quality of the protein crystal. The complete diffraction data set of a protein crystal, which is required for determining the 3D structure of the target protein, is obtainable by a simple manipulation.
Asunto(s)
Técnicas Analíticas Microfluídicas , Muramidasa/química , Animales , Pollos , Cristalografía , Muramidasa/metabolismo , Difracción de Rayos XRESUMEN
In mammals, highly lipophilic small molecule chemical agents can accumulate as inclusions within resident tissue macrophages. In this context, we characterized the biodistribution, chemical composition, and structure of crystal-like drug inclusions (CLDIs) formed by clofazimine (CFZ), a weakly basic lipophilic drug. With prolonged oral dosing, CFZ exhibited a significant partitioning with respect to serum and fat due to massive bioaccumulation and crystallization in the liver and spleen. The NMR, Raman, and powder X-ray diffraction (p-XRD) spectra of CLDIs isolated from the spleens of CFZ-treated mice matched the spectra of pure, CFZ hydrochloride crystals (CFZ-HCl). Elemental analysis revealed a 237-fold increase in chlorine content in CLDIs compared to untreated tissue samples and a 5-fold increase in chlorine content compared to CFZ-HCl, suggesting that the formation of CLDIs occurs through a chloride mediated crystallization mechanism. Single crystal analysis revealed that CFZ-HCl crystals had a densely packed orthorhombic lattice configuration. In vitro, CFZ-HCl formed at a pH of 4-5 only if chloride ions were present at sufficiently high concentrations (>50:1 Cl(-)/CFZ), indicating that intracellular chloride transport mechanisms play a key role in the formation of CLDIs. While microscopy and pharmacokinetic analyses clearly revealed crystallization and intracellular accumulation of the drug in vivo, the chemical and structural characterization of CLDIs implicates a concentrative, chloride transport mechanism, paralleling and thermodynamically stabilizing the massive bioaccumulation of a weakly basic drug.
Asunto(s)
Transporte Biológico/efectos de los fármacos , Clofazimina/metabolismo , Clofazimina/farmacología , Animales , Cloruros/metabolismo , Cristalización/métodos , Cuerpos de Inclusión , Hígado/metabolismo , Masculino , Ratones , Ratones Endogámicos C57BL , Bazo/metabolismo , Distribución TisularRESUMEN
Lipidic mesophases are a class of highly ordered soft materials that form when certain lipids are mixed with water. Understanding the relationship between the composition and the microstructure of mesophases is necessary for fundamental studies of self-assembly in amphiphilic systems and for applications, such as the crystallization of membrane proteins. However, the laborious formulation protocol for highly viscous mesophases and the large amounts of material required for sample formulation are significant obstacles in such studies. Here we report a microfluidic platform that facilitates investigations of the phase behavior of mesophases by reducing sample consumption 300-fold, and automating and parallelizing sample formulation. The mesophases were formulated on-chip using less than 80 nL of material per sample and their microstructure was analyzed in situ using small-angle X-ray scattering (SAXS). The 220 µm-thick X-ray compatible platform was comprised of thin polydimethylsiloxane (PDMS) layers sandwiched between cyclic olefin copolymer (COC) sheets. Uniform mesophases were prepared using an active on-chip mixing strategy coupled with periodic cooling of the sample to reduce viscosity. We validated the platform by preparing and analyzing mesophases of the lipid monoolein (MO) mixed with aqueous solutions of different concentrations of ß-octylglucoside (ßOG), a detergent frequently used in membrane protein crystallization. Four samples were prepared in parallel on chip, by first metering and automatically diluting ßOG to obtain detergent solutions of different concentration, then metering MO, and finally mixing by actuation of pneumatic valves. Integration of detergent dilution and subsequent mixing significantly reduced the number of manual steps needed for sample preparation. Three different types of mesophases typical for MO were successfully identified in SAXS data from on-chip samples. Microstructural parameters of identical samples formulated in different chips showed excellent agreement. Phase behavior of samples on-chip (~80 nL per sample) corresponded well with that of samples prepared via the traditional coupled-syringe method using at least two orders of magnitude more material ("off-chip", 35-40 µL per sample), further validating the applicability of the microfluidic platform for on-chip characterization of mesophase microstructure.
Asunto(s)
Lípidos/química , Técnicas Analíticas Microfluídicas/instrumentación , Transición de Fase , Dispersión del Ángulo Pequeño , Difracción de Rayos X , Detergentes/química , Técnicas Analíticas Microfluídicas/normas , Estándares de ReferenciaRESUMEN
This paper reports a method for fabricating multilayer microfluidic protein crystallization platforms using different materials to achieve X-ray transparency and compatibility with crystallization reagents. To validate this approach, three soluble proteins, lysozyme, thaumatin, and ribonuclease A were crystallized on-chip, followed by on-chip diffraction data collection. We also report a chip with an array of wells for screening different conditions that consume a minimal amount of protein solution as compared to traditional screening methods. A large number of high quality isomorphous protein crystals can be grown in the wells, after which slices of X-ray data can be collected from many crystals still residing within the wells. Complete protein structures can be obtained by merging these slices of data followed by further processing with crystallography software. This approach of using an x-ray transparent chip for screening, crystal growth, and X-ray data collection enables room temperature data collection from many crystals mounted in parallel, which thus eliminates crystal handling and minimizes radiation damage to the crystals.
RESUMEN
In the pharmaceutical industry, amorphous solid dispersion can be utilized to enhance the solubility, hence bioavailability, of poorly solubility active pharmaceutical ingredients owing to the higher free energy of the amorphous state. Measuring the concentration, size and spatial distribution of crystalline API particles that may be present in amorphous solid dispersions (ASD) is critical to understanding product performance and developing improved formulations. In this study X-Ray Microscopy (XRM) was used to nondestructively measure these attributes in ASDs. Model tablets of amorphous fenofibrate in a copovidone matrix spiked with known concentrations of crystalline fenofibrate were examined by XRM to measure the concentration, size and distribution of crystalline particles in the tablets. Data collection and analysis conditions were evaluated and reported. XRM images showed contrast between the crystalline API and the amorphous matrix of the tablet. Image analysis using basic thresholding provided quantitative and distribution data of the crystallinity present. Crystals as small as 10 µm were detected and practical quantitation limits of 0.2% (w/w of total tablet) crystallinity were demonstrated. The aspects of manual data thresholding were tested for operator influence and threshold selection and found to be robust. This technique was demonstrated to provide quantitative measures of crystallinity below standard X-Ray Powder Diffraction (XRPD) techniques, provide three-dimensional information regarding size, shape and distribution of API crystals and can be performed nondestructively.
Asunto(s)
Fenofibrato , Cristalización , Microscopía , Solubilidad , Comprimidos , Difracción de Rayos X , Rayos XRESUMEN
Early reaction intermediates in protein folding, such as those resulting in ß-amyloid formation due to transient misfolding, emerge within a few hundred microseconds. Here, we report a method to obtain sub-millisecond temporal resolution and molecular structural information of protein (mis-)folding events by using a microfluidic continuous-flow mixer (MCFM) in combination with Fourier transform infrared (FT-IR) imaging. The MCFMs are made out of cyclic olefin copolymer (COC) films, because this approach allows for rapid prototyping of different mixer designs. Furthermore, COC offers high IR transparency between 1500 and 2500 cm-1, thus maximizing the signal to noise ratio of the IR data obtained from a sample of interest. By combining narrow and wide channel widths in MCFM design, the platform provides fast mixing (460 µs) to induce protein (mis-)folding, and it maximizes the residence time in the observing area, so a wide range of reaction timescales can be captured in a single image. We validated the platform for its ability to induce and observe sub-millisecond processes by studying two systems: (i) the mixing of H2O and D2O and (ii) the mixing induced deprotonation of carboxylic acid. First, we observed excellent agreement between simulated and experimental data of the on-chip mixing of H2O and D2O, which verifies the distance-reaction time relationships based on simulation. Second, deprotonation of carboxylic acid by on-chip mixing with sodium hydroxide solution validates the ability of the platform to induce rapid pH jump that is needed for some biomolecular reactions. Finally, we studied the methanol-induced partial-unfolding of ubiquitin to show that our platform can be used to study biomolecular events 'on-pathway' using FT-IR imaging. We successfully extracted kinetic and structural details of the conformational changes along the channel. Our results are in agreement with prior studies that required more elaborate stopped flow approaches to acquire data for different time points. In summary, the reported method uses an easy-to-fabricate microfluidic mixer platform integrated with hyperspectral FT-IR imaging for rapid acquisition of structural details and kinetic parameters of biomolecular reactions. This approach does not need stopped flow or molecular imaging probes, as required respectively for alternative FT-IR spectroscopy and fluorescence approaches.
Asunto(s)
Dispositivos Laboratorio en un Chip , Imagen Molecular/instrumentación , Espectroscopía Infrarroja por Transformada de Fourier , Ácido Acético/química , Óxido de Deuterio/química , Concentración de Iones de Hidrógeno , Conformación Proteica , Desplegamiento Proteico , Relación Señal-Ruido , Ubiquitina/químicaRESUMEN
Crystallization of membrane proteins is a critical step for uncovering atomic resolution 3-D structures and elucidating structure-function relationships. Microseeding, the process of transferring sub-microscopic crystal nuclei from initial screens into new crystallization experiments, is an effective, yet underutilized approach to grow crystals suitable for X-ray crystallography. Here, we report simplified methods for crystallization of membrane proteins that utilize microseeding in X-ray transparent microfluidic chips. First, a microfluidic method for introduction of microseed dilutions into metastable crystallization experiments is demonstrated for photoactive yellow protein and cytochrome bo3 oxidase. As microseed concentration decreased, the number of crystals decreased while the average size increased. Second, we demonstrate a microfluidic chip for microseed screening, where many crystallization conditions were formulated on-chip prior to mixing with microseeds. Crystallization composition, crystal size, and diffraction data were collected and mapped on phase diagrams, which revealed that crystals of similar diffraction quality and size typically grow in distinct regions of the phase diagram.
Asunto(s)
Proteínas de la Membrana/química , Técnicas Analíticas Microfluídicas , Cristalización , Tamaño de la Partícula , Rayos XRESUMEN
Elucidating and clarifying the function of membrane proteins ultimately requires atomic resolution structures as determined most commonly by X-ray crystallography. Many high impact membrane protein structures have resulted from advanced techniques such as in meso crystallization that present technical difficulties for the set-up and scale-out of high-throughput crystallization experiments. In prior work, we designed a novel, low-throughput X-ray transparent microfluidic device that automated the mixing of protein and lipid by diffusion for in meso crystallization trials. Here, we report X-ray transparent microfluidic devices for high-throughput crystallization screening and optimization that overcome the limitations of scale and demonstrate their application to the crystallization of several membrane proteins. Two complementary chips are presented: (1) a high-throughput screening chip to test 192 crystallization conditions in parallel using as little as 8 nl of membrane protein per well and (2) a crystallization optimization chip to rapidly optimize preliminary crystallization hits through fine-gradient re-screening. We screened three membrane proteins for new in meso crystallization conditions, identifying several preliminary hits that we tested for X-ray diffraction quality. Further, we identified and optimized the crystallization condition for a photosynthetic reaction center mutant and solved its structure to a resolution of 3.5 Å.
RESUMEN
A primary Li-air battery has been developed with a flowing Li-ion free ionic liquid as the recyclable electrolyte, boosting power capability by promoting superoxide diffusion and enhancing discharge capacity through separately stored discharge products. Experimental and computational tools are used to analyze the cathode properties, leading to a set of parameters that improve the discharge current density of the non-aqueous Li-air flow battery. The structure and configuration of the cathode gas diffusion layers (GDLs) are systematically modified by using different levels of hot pressing and the presence or absence of a microporous layer (MPL). These experiments reveal that the use of thinner but denser MPLs is key for performance optimization; indeed, this leads to an improvement in discharge current density. Also, computational results indicate that the extent of electrolyte immersion and porosity of the cathode can be optimized to achieve higher current density.
RESUMEN
Mutants that decouple the proton pump of cytochrome c oxidase from Rhodobacter sphaeroides are postulated to do so by increasing the pK(a) of glutamate 286, which is 20 Angstrom away. The possibility that a conformational change near E286 is induced by the decoupling mutations (N139D and N207D) was investigated by FTIR difference spectroscopy. In both decoupled mutants, the reduced-minus-oxidized FTIR difference spectra show a shift of 2 cm(-1) to lower frequency of the band resulting from the absorbance of E286 in the oxidized enzyme. The decoupling mutants may influence E286 by altering the chain of water molecules which runs from the site of the mutations to E286.
Asunto(s)
Complejo IV de Transporte de Electrones/metabolismo , Ácido Glutámico/metabolismo , Mutación , Bombas de Protones/metabolismo , Rhodobacter sphaeroides/enzimología , Complejo IV de Transporte de Electrones/química , Complejo IV de Transporte de Electrones/genética , Modelos Moleculares , Oxidación-Reducción , Conformación Proteica , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Serial methods for crystallography have the potential to enable dynamic structural studies of protein targets that have been resistant to single-crystal strategies. The use of serial data-collection strategies can circumvent challenges associated with radiation damage and repeated reaction initiation. This work utilizes a microfluidic crystallization platform for the serial time-resolved Laue diffraction analysis of macroscopic crystals of photoactive yellow protein (PYP). Reaction initiation was achieved via pulsed laser illumination, and the resultant electron-density difference maps clearly depict the expected pR(1)/pR(E46Q) and pR(2)/pR(CW) states at 10â µs and the pB1 intermediate at 1â ms. The strategies presented here have tremendous potential for extension to chemical triggering methods for reaction initiation and for extension to dynamic, multivariable analyses.
Asunto(s)
Proteínas Bacterianas/química , Dispositivos Laboratorio en un Chip , Fotorreceptores Microbianos/química , Difracción de Rayos X/métodos , Proteínas Bacterianas/análisis , Cristalografía por Rayos X/métodos , Fotorreceptores Microbianos/análisis , Factores de TiempoRESUMEN
Crystallization from lipidic mesophase matrices is a promising route to diffraction-quality crystals and structures of membrane proteins. The microfluidic approach reported here eliminates two bottlenecks of the standard mesophase-based crystallization protocols: (i) manual preparation of viscous mesophases and (ii) manual harvesting of often small and fragile protein crystals. In the approach reported here, protein-loaded mesophases are formulated in an X-ray transparent microfluidic chip using only 60 nL of the protein solution per crystallization trial. The X-ray transparency of the chip enables diffraction data collection from multiple crystals residing in microfluidic wells, eliminating the normally required manual harvesting and mounting of individual crystals. We validated our approach by on-chip crystallization of photosynthetic reaction center, a membrane protein from Rhodobacter sphaeroides, followed by solving its structure to a resolution of 2.5 Å using X-ray diffraction data collected on-chip under ambient conditions. A moderate conformational change in hydrophilic chains of the protein was observed when comparing the on-chip, room temperature structure with known structures for which data were acquired under cryogenic conditions.
RESUMEN
Renewed interest in room-temperature diffraction has been prompted by the desire to observe structural dynamics of proteins as they function. Serial crystallography, an experimental strategy that aggregates small pieces of data from a large uniform pool of crystals, has been demonstrated at synchrotrons and X-ray free-electron lasers. This work utilizes a microfluidic crystallization platform for serial Laue diffraction from macroscopic crystals and proposes that a collection of small slices of Laue data from many individual crystals is a realistic solution to the difficulties in dynamic studies of irreversible biochemical reactions.
RESUMEN
We report a microfluidic approach for de novo protein structure determination via crystallization screening and optimization, as well as on-chip X-ray diffraction data collection. The structure of phosphonoacetate hydrolase (PhnA) has been solved to 2.11 Åvia on-chip collection of anomalous data that has an order of magnitude lower mosaicity than what is typical for traditional structure determination methods.
Asunto(s)
Fosfatasa Alcalina/química , Cristalografía por Rayos X/métodos , Técnicas Analíticas Microfluídicas/métodos , Temperatura , Cristalografía por Rayos X/instrumentación , Técnicas Analíticas Microfluídicas/instrumentación , Modelos Moleculares , Conformación Proteica , Sinorhizobium meliloti/enzimologíaRESUMEN
Cytochrome c oxidase (CcO) is the terminal enzyme of the respiratory chain and couples energetically the reduction of oxygen to water to proton pumping across the membrane. The results from previous studies showed that proton pumping can be uncoupled from the O2-reduction reaction by replacement of one single residue, Asn-139 by Asp (N139D), located approximately 30 A from the catalytic site, in the D-proton pathway. The uncoupling was correlated with an increase in the pK(a) of an internal proton donor, Glu-286, from approximately 9.4 to >11. Here, we show that replacement of the acidic residue, Asp-132 by Asn in the N139D CcO (D132N/N139D double-mutant CcO) results in restoration of the Glu-286 pK(a) to the original value and recoupling of the proton pump during steady-state turnover. Furthermore, a kinetic investigation of the specific reaction steps in the D132N/N139D double-mutant CcO showed that proton pumping is sustained even if proton uptake from solution, through the D-pathway, is slowed. However, during single-turnover oxidation of the fully reduced CcO the P --> F transition, which does not involve electron transfer to the catalytic site, was not coupled to proton pumping. The results provide insights into the mechanism of proton pumping by CcO and the structural elements involved in this process.
Asunto(s)
Complejo IV de Transporte de Electrones/química , Complejo IV de Transporte de Electrones/metabolismo , Bombas de Protones/química , Bombas de Protones/metabolismo , Protones , Rhodobacter sphaeroides/enzimología , Catálisis , Modelos Moleculares , Oxidación-Reducción , Unión Proteica , Estructura Cuaternaria de Proteína , Análisis EspectralRESUMEN
In the respiratory chain free energy is conserved by linking the chemical reduction of dioxygen to the electrogenic translocation of protons across a membrane. Cytochrome c oxidase (CcO) is one of the sites where this linkage occurs. Although intensively studied, the molecular mechanism of proton pumping by this enzyme remains unknown. Here, we present data from an investigation of a mutant CcO from Rhodobacter sphaeroides [Asn-139 --> Asp, ND(I-139)] in which proton pumping is completely uncoupled from the catalytic turnover (i.e., reduction of O2). However, in this mutant CcO, the rate by which O2 is reduced to H2O is even slightly higher than that of the wild-type CcO. The data indicate that the disabling of the proton pump is a result of a perturbation of E(I-286), which is located 20 A from N(I-139) and is an internal proton donor to the catalytic site, located in the membrane-spanning part of CcO. The mutation results in raising the effective pKa of E(I-286) by 1.6 pH units. An explanation of how the mutation uncouples catalytic turnover from proton pumping is offered, which suggests a mechanism by which CcO pumps protons.
Asunto(s)
Complejo IV de Transporte de Electrones/química , Complejo IV de Transporte de Electrones/metabolismo , Rhodobacter sphaeroides/enzimología , Sustitución de Aminoácidos , Asparagina , Ácido Aspártico , Concentración de Iones de Hidrógeno , Cinética , Modelos Moleculares , Consumo de Oxígeno , Conformación Proteica , ProtonesRESUMEN
The N139D mutant of cytochrome c oxidase from Rhodobacter sphaeroides retains full steady state oxidase activity but completely lacks proton translocation coupled to turnover in reconstituted liposomes (Pawate, A. S., Morgan, J., Namslauer, A., Mills, D., Brzezinski, P., Ferguson-Miller, S., and Gennis, R. B. (2002) Biochemistry 41, 13417-13423). Here, time-resolved electron transfer and vectorial charge translocation in the ferryl-oxo --> oxidized transition (transfer of the 4th electron in the catalytic cycle) have been studied with the N139D mutant using ruthenium(II)-tris-bipyridyl complex as a photoactive single-electron donor. With the wild type oxidase, the flash-induced generation of Deltaphi in the ferryl-oxo --> oxidized transition begins with rapid vectorial electron transfer from CuA to heme a (tau approximately 15 micros), followed by two protonic phases, referred to as the intermediate (0.4 ms) and slow electrogenic phases (1.5 ms). In the N139D mutant, only a single protonic phase (tau approximately 0.6 ms) is observed, which was associated with electron transfer from heme a to the heme a3/CuB site and decelerates approximately 4-fold in D2O. With the wild type oxidase, such a high H2O/D2O solvent isotope effect is characteristic of only the slow (1.5 ms) phase. Presumably, the 0.6-ms electrogenic phase in the N139D mutant reports proton transfer from the inner aqueous phase to Glu-286, replacing the "chemical" proton transferred from Glu-286 to the heme a3/CuB site. The transfer occurs through the D-channel, because it is observed also in the N139D/K362M double mutant in which the K-channel is blocked. It is concluded that the intermediate electrogenic phase observed in the wild type enzyme is missing in the N139D mutant and is because of translocation of the "pumped" proton from Glu-286 to the D-ring propionate of heme a3 or to release of this proton to the outer aqueous phase. Significantly, with the wild type oxidase, the protonic electrogenic phase associated with proton pumping (approximately 0.4 ms) precedes the electrogenic phase associated with the oxygen chemistry (approximately 1.5 ms).
Asunto(s)
Complejo IV de Transporte de Electrones/genética , Complejo IV de Transporte de Electrones/metabolismo , Proteínas Bacterianas/química , Proteínas Bacterianas/genética , Proteínas Bacterianas/metabolismo , Óxido de Deuterio , Electroquímica , Transporte de Electrón , Complejo IV de Transporte de Electrones/química , Hemo/química , Cinética , Modelos Biológicos , Mutagénesis Sitio-Dirigida , Oxidación-Reducción , Bombas de Protones/química , Bombas de Protones/genética , Bombas de Protones/metabolismo , Protones , Rhodobacter sphaeroides/enzimología , Rhodobacter sphaeroides/genéticaRESUMEN
The heme-copper oxidases convert the free energy liberated in the reduction of O(2) to water into a transmembrane proton electrochemical potential (protonmotive force). One of the essential structural elements of the enzyme is the D-channel, which is thought to be the input pathway, both for protons which go to form H(2)O ("chemical protons") and for protons that get translocated across the lipid membrane ("pumped protons"). The D-channel contains a chain of water molecules extending about 25 A from an aspartic acid (D132 in the Rhodobacter sphaeroides oxidase) near the cytoplasmic ("inside") enzyme surface to a glutamic acid (E286) in the protein interior. Mutations in which either of these acidic residues is replaced by their corresponding amides (D132N or E286Q) result in severe inhibition of enzyme activity. In the current work, an asparagine located in the D-channel has been replaced by the corresponding acid (N139 to D; N98 in bovine enzyme) with dramatic consequences. The N139D mutation not only completely eliminates proton pumping but, at the same time, confers a substantial increase (150-300%) in the steady-state cytochrome oxidase activity. The N139D mutant of the R. sphaeroides oxidase was further characterized by examining the rates of individual steps in the catalytic cycle. Under anaerobic conditions, the rate of reduction of heme a(3) in the fully oxidized enzyme, prior to the reaction with O(2), is identical to that of the wild-type oxidase and is not accelerated. However, the rate of reaction of the fully reduced enzyme with O(2) is accelerated by the N139D mutation, as shown by a more rapid F --> O transition. Whereas the rates of formation and decay of the oxygenated intermediates are altered, the nature of the oxygenated intermediates is not perturbed by the N139D mutation.