Rational modification of a dendrimeric peptide with antimicrobial activity: consequences on membrane-binding and biological properties.

Peptide-based antibiotics might help containing the rising tide of antimicrobial resistance. We developed SB056, a semi-synthetic peptide with a dimeric dendrimer scaffold, active against both Gram-negative and Gram-positive bacteria. Being the mechanism of SB056 attributed to disruption of bacterial membranes, we enhanced the amphiphilic profile of the original, empirically derived sequence [WKKIRVRLSA-NH2] by interchanging the first two residues [KWKIRVRLSA-NH2], and explored the effects of this modification on the interaction of peptide, both in linear and dimeric forms, with model membranes and on antimicrobial activity. Results obtained against Escherichia coli and Staphylococcus aureus planktonic strains, with or without salts at physiological concentrations, confirmed the added value of dendrimeric structure over the linear one, especially at physiological ionic strength, and the impact of the higher amphipathicity obtained through sequence modification on enhancing peptide performances. SB056 peptides also displayed intriguing antibiofilm properties. Staphylococcus epidermidis was the most susceptible strain in sessile form, notably to optimized linear analog lin-SB056-1 and the wild-type dendrimer den-SB056. Membrane affinity of all peptides increased with the percentage of negatively charged lipids and was less influenced by the presence of salt in the case of dendrimeric peptides. The analog lin-SB056-1 displayed the highest overall affinity, even for zwitterionic PC bilayers. Thus, in addition to electrostatics, distribution of charged/polar and hydrophobic residues along the sequence might have a significant role in driving peptide-lipid interaction. Supporting this view, dendrimeric analog den-SB056-1 retained greater membrane affinity in the presence of salt than den-SB056, despite the fact that they bear exactly the same net positive charge.

A novel dendrimeric peptide with antimicrobial properties: structure-function analysis of SB056.

The novel antimicrobial peptide with a dimeric dendrimer scaffold, SB056, was empirically optimized by high-throughput screening. This procedure produced an intriguing primary sequence whose structure-function analysis is described here. The alternating pattern of hydrophilic and hydrophobic amino acids suggests the possibility that SB056 is a membrane-active peptide that forms amphiphilic ß-strands in a lipid environment. Circular dichroism confirmed that the cationic SB056 folds as ß-sheets in the presence of anionic vesicles. Lipid monolayer surface pressure experiments revealed unusual kinetics of monolayer penetration, which suggest lipid-induced aggregation as a membranolytic mechanism. NMR analyses of the linear monomer and the dendrimeric SB056 in water and in 30% trifluoroethanol, on the other hand, yielded essentially unstructured conformations, supporting the excellent solubility and storage properties of this compound. However, simulated annealing showed that many residues lie in the ß-region of the Ramachandran plot, and molecular-dynamics simulations confirmed the propensity of this peptide to fold as a ß-type conformation. The excellent solubility in water and the lipid-induced oligomerization characteristics of this peptide thus shed light on its mechanism of antimicrobial action, which may also be relevant for systems that can form toxic ß-amyloid fibrils when in contact with cellular membranes. Functionally, SB056 showed high activity against Gram-negative bacteria and some limited activity against Gram-positive bacteria. Its potency against Gram-negative strains was comparable (on a molar basis) to that of colistin and polymyxin B, with an even broader spectrum of activity than numerous other reference compounds.

Inhibition of human respiratory syncytial virus infectivity by a dendrimeric heparan sulfate-binding peptide.

Respiratory syncytial virus (RSV) interacts with cell surface heparan sulfate proteoglycans (HSPGs) to initiate infection. The interaction of RSV with HSPGs thus presents an attractive target for the development of novel inhibitors of RSV infection. In the present study, a minilibrary of linear, dimeric, and dendrimeric peptides containing clusters of basic amino acids was screened with the aim of identifying peptides able to bind HSPGs and thus block RSV attachment and infectivity. Of the compounds identified, the dendrimer SB105-A10 was the most potent inhibitor of RSV infectivity, with 50% inhibitory concentrations (IC(50)s) of 0.35 µM and 0.25 µM measured in Hep-2 and A549 cells, respectively. SB105-A10 was found to bind to both cell types via HSPGs, suggesting that its antiviral activity is indeed exerted by competing with RSV for binding to cell surface HSPGs. SB105-A10 prevented RSV infection when added before the viral inoculum, in line with its proposed HSPG-binding mechanism of action; moreover, antiviral activity was also exhibited when SB105-A10 was added postinfection, as it was able to reduce the cell-to-cell spread of the virus. The antiviral potential of SB105-A10 was further assessed using human-derived tracheal/bronchial epithelial cells cultured to form a pseudostratified, highly differentiated model of the epithelial tissue of the human respiratory tract. SB105-A10 strongly reduced RSV infectivity in this model and exhibited no signs of cytotoxicity or proinflammatory effects. Together, these features render SB105-A10 an attractive candidate for further development as a RSV inhibitor to be administered by aerosol delivery.

Inhibition of herpes simplex virus type 1 and type 2 infections by peptide-derivatized dendrimers.

In response to the need for new antiviral agents, dendrimer-based molecules have been recognized as having a large number of potential therapeutic applications. They include peptide-derivatized dendrimers, which are hyperbranched synthetic well-defined molecules which consist of a peptidyl branching core and covalently attached surface functional peptides. However, few studies have addressed their applications as direct-acting antiviral agents. Here, we report on the ability of the peptide dendrimer SB105 and its derivative, SB105_A10, to directly inhibit herpes simplex virus 1 (HSV-1) and HSV-2 in vitro replication, with favorable selective indexes discerned for both compounds. An analysis of their mode of action revealed that SB105 and SB105_A10 prevent HSV-1 and HSV-2 attachment to target cells, whereas SB104, a dendrimer with a different amino acid sequence within the functional group and minimal antiviral activity, was ineffective in blocking HSV attachment. Moreover, both SB105 and SB105_A10 retained their ability to inhibit HSV adsorption at pH 3.0 and 4.0 and in the presence of 10% human serum proteins, conditions mimicking the physiological properties of the vagina, a potential therapeutic location for such compounds. The inhibition of HSV adsorption is likely to stem from the ability of SB105_A10 to bind to the glycosaminoglycan moiety of cell surface heparan sulfate proteoglycans, thereby blocking virion attachment to target cells. Finally, when combined with acyclovir in checkerboard experiments SB105_A10 exhibited highly synergistic activity. Taken together, these findings suggest that SB105 and SB105_A10 are promising candidates for the development of novel topical microbicides for the prevention of HSV infections.

Identification of a dendrimeric heparan sulfate-binding peptide that inhibits infectivity of genital types of human papillomaviruses.

Peptide dendrimers consist of a peptidyl branching core and/or covalently attached surface functional units. They show a variety of biological properties, including antiviral activity. In this study, a minilibrary of linear, dimeric, and dendrimeric peptides containing clusters of basic amino acids was evaluated for in vitro activity against human papillomaviruses (HPVs). The peptide dendrimer SB105-A10 was found to be a potent inhibitor of genital HPV types (i.e., types 16, 18, and 6) in pseudovirus-based neutralization assays. The 50% inhibitory concentration was between 2.8 and 4.2 µg/ml (0.59 and 0.88 µM), and no evidence of cytotoxicity was observed. SB105-A10 interacts with immobilized heparin and with heparan sulfates exposed on the cell surface, most likely preventing virus attachment. The findings from this study indicate SB105-A10 to be a leading candidate compound for further development as an active ingredient of a topical microbicide against HPV and other sexually transmitted viral infections.

Atomic force microscopy evaluation of the effects of a novel antimicrobial multimeric peptide on Pseudomonas aeruginosa.

In this article we evaluated by atomic force microscopy (AFM) the effects of the (novel) tetrabranched antimicrobial peptide SB006 on morphology and mechanical properties of the gram-negative bacterium Pseudomonas aeruginosa. AFM imaging showed that SB006 causes the appearance of significant fragmentariness in the bacterial membrane and a severe volume decrease. Quantitative evaluation of the degree of fragmentariness was allowed by a new ad hoc image analysis procedure. The rigidity of the treated and untreated bacteria was measured through AFM tip nanoindentation measurements, and no differences registered. These results support the membrane interaction hypothesis, according to which SB006 targets the bacterial membranes and disrupts their permeability (allowing the leakage of cytoplasmic material and the subsequent shrinkage), but it does not affect the bacterium wall, which determines its rigidity.

Protein and peptide arrays: recent trends and new directions.

Microarrays of proteins and peptides make it possible the screening of thousands of binding events in a parallel and high throughput fashion; therefore they are emerging as a powerful tool for proteomics and clinical assays. The complex nature of Proteome, the wide dynamic range of protein concentration in real samples and the critical role of immobilized protein orientation must be taken into account to maximize the utility of protein microarrays. Immobilization strategy and designing of an ideal local chemical environment on the solid surface are both essential for the success of a protein microarray experiment. This review article will focus on protein and peptide arrays highlighting their technical challenges and presenting new directions by means of a set of selected recent applications.

Surface behavior and molecular recognition in DNA microarrays from N,N-dimethylacrylamide terpolymers with activated esters as linking groups.

A series of terpolymers made of DMA, NAS and MAPS were synthesized by free radical copolymerization and used as functional coatings for the fabrication of glass slide DNA microarrays. The surface properties of coated glass slides were investigated through contact angle measurements, ellipsometry and atomic force microscopy. The terpolymer molecular weight showed a moderate effect on surface tension (gamma(s) = 56-62 mN x m(-1)), but no clear effect on polymeric layer thickness (5-8 nm) and roughness. Hybridization experiments with amine-functionalized oligonucleotides gave the best fluorescence intensity results for microarrays coated with intermediate-molecular-weight terpolymers. Finally, an accelerated ageing test of the microarray in a humidity chamber showed a nice relationship between decay curves of contact angle against water and fluorescence intensity.

Enhanced amphiphilic profile of a short ß-stranded peptide improves its antimicrobial activity.

SB056 is a novel semi-synthetic antimicrobial peptide with a dimeric dendrimer scaffold. Active against both Gram-negative and -positive bacteria, its mechanism has been attributed to a disruption of bacterial membranes. The branched peptide was shown to assume a ß-stranded conformation in a lipidic environment. Here, we report on a rational modification of the original, empirically derived linear peptide sequence [WKKIRVRLSA-NH2, SB056-lin]. We interchanged the first two residues [KWKIRVRLSA-NH2, ß-SB056-lin] to enhance the amphipathic profile, in the hope that a more regular ß-strand would lead to a better antimicrobial performance. MIC values confirmed that an enhanced amphiphilic profile indeed significantly increases activity against both Gram-positive and -negative strains. The membrane binding affinity of both peptides, measured by tryptophan fluorescence, increased with an increasing ratio of negatively charged/zwitterionic lipids. Remarkably, ß-SB056-lin showed considerable binding even to purely zwitterionic membranes, unlike the original sequence, indicating that besides electrostatic attraction also the amphipathicity of the peptide structure plays a fundamental role in binding, by stabilizing the bound state. Synchrotron radiation circular dichroism and solid-state 19F-NMR were used to characterize and compare the conformation and mobility of the membrane bound peptides. Both SB056-lin and ß-SB056-lin adopt a ß-stranded conformation upon binding POPC vesicles, but the former maintains an intrinsic structural disorder that also affects its aggregation tendency. Upon introducing some anionic POPG into the POPC matrix, the sequence-optimized ß-SB056-lin forms well-ordered ß-strands once electro-neutrality is approached, and it aggregates into more extended ß-sheets as the concentration of anionic lipids in the bilayer is raised. The enhanced antimicrobial activity of the analogue correlates with the formation of these extended ß-sheets, which also leads to a dramatic alteration of membrane integrity as shown by 31P-NMR. These findings are generally relevant for the design and optimization of other membrane-active antimicrobial peptides that can fold into amphipathic ß-strands.

Antimicrobial peptides: the LPS connection.

An expanding body of evidence is rendering manifest that many cationic antimicrobial peptides are endowed with different properties and activities, well beyond their direct action on microbes. One of the most interesting and potentially important research avenue on the alternative use of antimicrobial peptides grounds on their affinity toward lipopolysaccharide (LPS), the endotoxin, responsible for the systemic inflammatory response syndrome (SIRS) and related, often fatal, disorders that can follow Gram-negative infections. Indeed, not only do several antimicrobial peptides, such as cathelicidins, display an ability to strongly bind LPS and break its aggregates, but they have also been demonstrated to suppress LPS-induced pro-inflammatory responses in vitro and to protect from sepsis in animal models. Although many aspects still need to be carefully evaluated - some of which are highlighted here - a mix of antimicrobial, LPS-sequestering/neutralization, and immunomodulatory features make cationic peptides, and especially synthetic or semi-synthetic amphiphilic compounds built on their scheme, attractive candidates for novel drugs to be administered in antisepsis therapies. These therapies will probably hinge either on compounds able to intervene at multiple points in the sepsis cascade or on the combination of two or more immunomodulators.

Peptide-derivatized dendrimers inhibit human cytomegalovirus infection by blocking virus binding to cell surface heparan sulfate.

Dendrimers are hyperbranched synthetic well-defined molecules with a number of potential applications, especially in relation to the need for new antiviral agents. One subclass of dendrimers are peptide-derivatized dendrimers which consist of a peptidyl branching core and covalently attached surface peptide functional units. Few studies have addressed the potential uses of peptide dendrimers as direct-acting antiviral agents. Here, we report on the ability of two peptide dendrimers, SB105 and SB105_A10, to directly and almost completely inhibit human cytomegalovirus (HCMV) replication in both primary fibroblasts and endothelial cells; the agents were also found to inhibit murine CMV replication, whereas they were not able to inhibit adenovirus or vesicular stomatitis virus. The peptide dendrimers prevented adsorption of the HCMV to cells at 4 degrees C, whereas SB104, a dendrimer with a different amino acid sequence within the functional group and minimal anticytomegaloviral activity, was ineffective in blocking HCMV attachment. In effect, SB105_A10 bound to human cells through an interaction with cell surface heparan sulfate and thereby blocked virion attachment to target cells. These results indicate that the SB105 and SB105_A10 dendrimers could provide a useful starting point for the development of novel molecules to block HCMV infection.

Synthesis, characterization, antimicrobial activity and LPS-interaction properties of SB041, a novel dendrimeric peptide with antimicrobial properties.

Multimeric peptides offer several advantages with respect to their monomeric counterparts, as increased activity and greater stability to peptidases and proteases. SB041 is a novel antimicrobial peptide with dendrimeric structure; it is a tetramer of pyrEKKIRVRLSA linked by a lysine core, with an amino valeric acid chain. Here, we report on its synthesis, NMR characterization, antimicrobial activity, and LPS-interaction properties. The peptide was especially active against Gram-negative strains, with a potency comparable (on molar basis) to that of lipopeptides colistin and polymixin B, but it also displayed some activity against selected Gram-positive strains. Following these indications, we investigated the efficacy of SB041 in binding Escherichia coli and Pseudomonas aeruginosa LPS in vitro and counteracting its biological effects in RAW-Blue cells, derived from RAW 264.7 macrophages. SB041 strongly bound purified LPS, especially that of E. coli, as proved by fluorescent displacement assay, and readily penetrated into LPS monolayers. However, the killing activity of SB041 against E. coli was not inhibited by increasing concentrations of LPS added to the medium. Checking the SB041 effect on LPS-induced activation of pattern recognition receptors (PRRs) in Raw-Blue cells revealed that while the peptide gave a statistically significant decrease in PRRs stimulation when RAW-Blue cells were challenged with P. aeruginosa LPS, the same was not seen when E. coli LPS was used to activate innate immune defense-like responses. Thus, as previously seen for other antimicrobial peptides, also for SB041 binding to LPS did not translate necessarily into LPS-neutralizing activity, suggesting that SB041-LPS interactions must be of complex nature.

Microarray glass slides coated with block copolymer brushes obtained by reversible addition chain-transfer polymerization.

The reversible addition-fragmentation chain-transfer polymerization was used to prepare microarray slides grafted with polymer brushes for DNA-based applications. Block copolymer brushes of N,N-dimethylacrylamide (DMA) and glycidyl methacrylate (GMA), poly(DMA-b-GMA) were prepared by extending living poly(dimethylacrylamide) chains. The functional surface was used as a substrate for oligonucleotide hybridization experiments. The results were compared to those provided by glass slides coated by a self-assembled monolayer made of (3-glycidyloxypropyl)trimethoxysilane. Surfaces coated with block polymer brushes bearing oxirane groups are more efficient as substrates for oligonucleotide hybridization than surfaces coated with nonpolymeric self-assembled monolayers containing the same functional group. The high probe grafting density and hybridization efficiency achieved with this polymeric coating reveal the importance of the block architecture to ensure good accessibility of the immobilized probe. The new surface was characterized by static angle measurements and diffuse reflectance FT-IR spectroscopy on a silica model system.

Electroosmotic flow suppression in capillary electrophoresis: chemisorption of trimethoxy silane-modified polydimethylacrylamide.

Adsorbed polymers are widely used to suppress electroosmotic flow (EOF) in capillary electrophoresis (CE). Polymeric coatings, physisorbed onto the surface of the capillary wall, are often unstable under harsh conditions. This can be attributed to the reversible nature of the coating which becomes apparent when the adsorbed layer competes with a second species in the electrophoresis buffer solution for attachment/interaction with the capillary surface. In an effort to overcome the problem of coating instability, trimethoxysilane-modified polydimethylacrylamide was synthesized. This copolymer rapidly adsorbs on the wall from ultradilute aqueous solutions. After incubation at a temperature of 60 degrees C silyl groups, which extend from the polymer backbone, form condensation bonds with the silanols on the capillary surface. This enables subsequent formation of strong covalent bonds between the copolymer and the capillary wall. In this research, we establish that physisorption of polymer chains to the surface is essential for close alignment of surface and polymer silane groups which facilitates the formation of covalent bonds.

Peptide microarrays for the characterization of antigenic regions of human chromogranin A.

Microarraying peptides is a powerful proteomics technique for studying molecular recognition events. Since peptides have small molecular mass, they are not easily accessible when adsorbed onto solid supports. Moreover, peptides can lack a well-defined three-dimensional structure, and therefore a correct orientation is essential to promote the interaction with their target. In this work, we investigated the suitability as a peptide array substrate of a glass slide coated with a copolymer of N,N-dimethylacrylamide, N,N-acryloyloxysuccinimide, and [3-(methacryloyl-oxy)propyl]trimethoxysilyl. This polymeric surface was used as substrate for peptides in the characterization of linear antigenic sites of human chromogranin A, a useful tissue and serum marker for neuroendocrine tumors and a precursor of many biologically active peptides. The microarray support provided sufficient accessibility of the ligand, with no need for a spacer, as the polymer chains prevent interaction of immobilized peptides with substrate. In addition, the polymeric surface constitutes an aqueous micro-environment in which linear epitopes are freely exposed despite peptide random orientation. The results reported in this article are in accordance with those obtained in conventional ELISA assays using biotinylated and non-biotinylated peptides.

Separation of proteins in a multicompartment electrolyzer with chambers defined by a bed of gel beads.

Multicompartment electrolyzers (MEs) with isoelectric membranes were introduced in 1989 for purifying proteins in an electric field. At the basis of ME technology there are membranes consisting of cross-linked copolymers of acrylamide and acrylamido monomers bearing protolytic groups. The technology employed for casting the membranes is an extension of the isoelectric focusing in immobilized pH gradient technique for which specific acrylamido monomers, known with the trade name of Immobiline, have been developed. However, the use of continuous membranes presents several disadvantages. Due to the mechanical characteristics of polyacrylamide, the gel must physically adhere onto a rigid support, which prevents it from collapsing. The support must have a highly porous structure in order to be permeable to proteins. The mechanical fragility of the membranes is one of the main problems that hinders the industrial scale application of ME separators. In order to overcome this problem, we propose to substitute the continuous membranes with a bed of gel beads of identical comonomer composition, obtained by an inverse emulsion polymerization process.

Use of peptide nucleic acid probes for detecting DNA single-base mutations by capillary electrophoresis.

Peptide nucleic acid (PNA) oligomers can be used as probes in pre-gel hybridization experiments, as an alternative to Southern hybridization. In this technique, the PNA probe is hybridized to a cyanine-5 labeled DNA sample denatured at low ionic strength, and the mixture is directly injected for size separation into a capillary electrophoresis (CE) system equipped with laser-induced fluorescence (LIF) detector. The neutral backbone of PNA allows hybridization to occur at low ionic strength and assures an efficient CE separation of the PNA/DNA hybrids from both double-stranded and single-stranded DNA. We have used as a model system the cystic fibrosis R553X and R1162X single-base mutations and we have assessed the influence of various factors, such as temperature and denaturants concentration on DNA/PNA hybrid stability in order to achieve the high specificity required for a single base pair discrimination.

Characterization of a polymeric adsorbed coating for DNA microarray glass slides.

A new method was developed to covalently attach target molecules onto the surface of glass substrates such as microwell plates, beads, tubes, and microscope slides, for hybridization assays with fluorescent targets. The innovative concept introduced by this work is to physically adsorb onto underivatized glass surfaces a functional copolymer, able to graft amino-modified DNA molecules. The polymer, obtained by radical copolymerization of N,N-dimethylacrylamide, N-acryloyloxysuccinimide, and 3-(trimethoxysilyl)propyl methacrylate, copoly(DMA-NAS-MAPS), self-adsorbs onto the glass surface very quickly, typically in 5-30 min. The film, formed on the surface, bears active esters, which react with amino-modified DNA targets. The surface layer is stable in an aqueous buffer containing various additives (SDS, urea, salt), even at boiling temperature. It should be emphasized that the coating is formed by the immersion of glass slides in a diluted aqueous solution of the polymer. Therefore, the procedure is fast, inexpensive, robust, and reliable, and it does not require time-consuming glass pretreatments. Slides, coated with copoly(DMA-NAS-MAPS), were profitably used as substrates for the preparation of low-density DNA microarrays. The density and the thickness of the films were evaluated by X-ray reflectivity measurements whereas the extent of reaction of functional groups with DNA molecules was determined by a functional test. The experiments indicate that half of the active groups present on the surface reacts with oligonucleotide probes.

A new polymeric coating for protein microarrays.

Despite the increasing interest in arraying proteins in a high-density format, several technical issues still impede the development of protein microarray technology. One of the major problems is the availability of substrates that are able to bind native proteins with high density. In this study, we investigated the suitability of a novel surface as a support for protein microarrays. A polymeric glass coating is obtained by physical adsorption of a N,N-dimethylacrylamide (DMA), N,N-acryloyloxysuccinimide (NAS), and [3-(methacryloyl-oxy)propyl]trimethoxysilyl (MAPS) copolymer. The coating procedure provides a fast and inexpensive method of producing hydrophilic functional surfaces. The slide performance was investigated in a protein-protein interaction experiment and in the assessment of rheumatoid factor (RF) in human serum samples. The results demonstrate that the ligands immobilized on the polymeric surface maintain an active conformation and are easily accessible, providing a detection limit of 54amol/spot. Moreover, in the RF assay, after hybridization with the sera, the slides have a low background, leading to a detection limit of 900amol/spot.

Nonconventional synthesis and characterization of ultrahigh-molar-mass polyacrylamides.

In spite of the significant progresses in the field of replaceable sieving matrices for separating DNA in capillary electrophoresis (CE), an intense research activity is still going on to improve the separation of large size DNA sequencing fragments. There are evidences, both from experimental and theoretical sides that the resolution of these fragments, at the single base, requires the use of sieving matrices comprised of long chain linear polymers. In the separation of DNA fragments by CE are of upmost importance: (i) the complete solubility of the polymer, (ii) the linearity of the chain, (iii) the achievement of ultrahigh viscosity in dilute solutions. The aim of this work is the synthesis of ultrahigh-molecular-weight polymers which possess the three requirements mentioned above by employing a nonconventional method. We demonstrate that the sieving performance of polyacrylamide is directly correlated to its intrinsic viscosity.