Aflibercept exhibits VEGF binding stoichiometry distinct from bevacizumab and does not support formation of immune-like complexes.

Anti-vascular endothelial growth factor (VEGF) therapies have improved clinical outcomes for patients with cancers and retinal vascular diseases. Three anti-VEGF agents, pegaptanib, ranibizumab, and aflibercept, are approved for ophthalmic indications, while bevacizumab is approved to treat colorectal, lung, and renal cancers, but is also used off-label to treat ocular vascular diseases. The efficacy of bevacizumab relative to ranibizumab in treating neovascular age-related macular degeneration has been assessed in several trials. However, questions persist regarding its safety, as bevacizumab can form large complexes with dimeric VEGF165, resulting in multimerization of the Fc domain and platelet activation. Here, we compare binding stoichiometry, Fcγ receptor affinity, platelet activation, and binding to epithelial and endothelial cells in vitro for bevacizumab and aflibercept, in the absence or presence of VEGF. In contrast to bevacizumab, aflibercept forms a homogenous 1:1 complex with each VEGF dimer. Unlike multimeric bevacizumab:VEGF complexes, the monomeric aflibercept:VEGF complex does not exhibit increased affinity for low-affinity Fcγ receptors, does not activate platelets, nor does it bind to the surface of epithelial or endothelial cells to a greater degree than unbound aflibercept or control Fc. The latter finding reflects the fact that aflibercept binds VEGF in a unique manner, distinct from antibodies not only blocking the amino acids necessary for VEGFR1/R2 binding but also occluding the heparin-binding site on VEGF165.

Comprehensive chromatographic assessment of forced degraded in vitro transcribed mRNA.

Heightened interest in messenger RNA (mRNA) therapeutics has accelerated the need for analytical methodologies that facilitate the production of supplies for clinical trials. Forced degradation studies are routinely conducted to provide an understanding of potential weak spots in the molecule that are exploited by stresses encountered during bulk purification, production, shipment, and storage. Consequently, temperature fluctuations and excursions are often experienced during these unit operations and may accelerate mRNA degradation. Here, we present a concise panel of chromatography-based stability-indicating assays for evaluating thermally stressed in vitro transcribed (IVT) mRNA as part of a forced degradation study. We found that addition of EDTA to the mRNAs prior to heat exposure reduced the extent of degradation, suggesting that transcripts may be fragmenting via a divalent metal-ion mediated pathway. Trace divalent metal contamination that can accelerate RNA instability is likely carried over from upstream steps. We demonstrate the application of these methods to evaluate the critical quality attributes (CQAs) of mRNAs as well as to detect intrinsic process- and product-related impurities.

Development of a platform method for rapid detection and characterization of domain-specific post-translational modifications in bispecific antibodies.

Charge heterogeneity is inherent to all therapeutic antibodies and arises from post-translational modifications (PTMs) and/or protein degradation events that may occur during manufacturing. Among therapeutic antibodies, the bispecific antibody (bsAb) containing two unique Fab arms directed against two different targets presents an additional layer of complexity to the charge profile. In the context of a bsAb, a single domain-specific PTM within one of the Fab domains may be sufficient to compromise target binding and could potentially impact the stability, safety, potency, and efficacy of the drug product. Therefore, characterization and routine monitoring of domain-specific modifications is critical to ensure the quality of therapeutic bispecific antibody products. We developed a Digestion-assisted imaged Capillary isoElectric focusing (DiCE) method to detect and quantitate domain-specific charge variants of therapeutic bispecific antibodies (bsAbs). The method involves enzymatic digestion using immunoglobulin G (IgG)-degrading enzyme of S. pyogenes (IdeS) to generate F(ab)2 and Fc fragments, followed by imaged capillary isoelectric focusing (icIEF) under reduced, denaturing conditions to separate the light chains (LCs) from the Fd domains. Our results suggest that DiCE is a highly sensitive method that is capable of quantitating domain-specific PTMs of a bsAb. In one case study, DiCE was used to quantitate unprocessed C-terminal lysine and site-specific glycation of Lys98 in the complementarity-determining region (CDR) of a bsAb that could not be accurately quantitated using conventional, platform-based charge variant analysis, such as intact icIEF. Quantitation of these PTMs by DiCE was comparable to results from peptide mapping, demonstrating that DiCE is a valuable orthogonal method for ensuring product quality. This method may also have potential applications for characterizing fusion proteins, antibody-drug conjugates, and co-formulated antibody cocktails.

Enrichment strategy and initial characterization of heterodimers enriched from a co-formulated cocktail of therapeutic antibodies against SARS-COV-2.

Co-formulation of multiple drug products is an efficient and convenient approach to simultaneously deliver multiple biotherapeutics with the potentially added benefit of a synergistic therapeutic effect. However, co-formulation also increases the risk of heteromeric interactions, giving rise to unique impurities with unknown efficacy and immunogenicity. Therefore, it is critical to develop methods to evaluate the risk of heteromers as an impurity that could affect potency, efficacy, and/or immunogenicity. The most direct strategy to evaluate antibody heteromers is via specific enrichment. However, the fact that antibody heterodimers generated from the co-formulated cocktail share highly similar molar mass and size properties as homodimers natively present in each individual antibody drug product poses a unique purification challenge. Here, we report the path to successful enrichment of heterodimers from co-formulated REGEN-COVⓇ and discuss its potential impacts on drug quality.

Comprehensive biophysical characterization of AAV-AAVR interaction uncovers serotype- and pH-dependent interaction.

After more than two decades of research and development, adeno-associated virus (AAV) has become one of the dominant delivery vectors in gene therapy. Despite the focused research, the cell entry pathway for AAV is still not fully understood. Universal AAV receptor (AAVR) has been identified to be involved in cellular entry of different AAV serotypes. With the unveiling of the high-resolution AAV-AAVR complex structure by cryogenic electron microscopy, the atomic level interaction between AAV and AAVR has become the focus of study in recent years. However, the serotype dependence of this binding interaction and the effect of pH have not been studied. Here, orthogonal approaches including bio-layer interferometry (BLI), size-exclusion chromatography coupled to multi-angle laser scattering (SEC-MALS) and sedimentation velocity analytical ultracentrifugation (SV-AUC) were utilized to study the interaction between selected AAV serotypes and AAVR under different pH conditions. A robust BLI method was developed and the equilibrium dissociation binding constants (KD) between different AAV serotypes (AAV1, AAV5 and AAV8) and AAVR was measured. The binding constants measured by BLI together with orthogonal methods (SEC-MALS and SV-AUC) all confirmed that AAV5 has the strongest binding affinity followed by AAV1 while AAV8 binds the weakest. It was also observed that lower pH promotes the binding between AAV and AAVR and neutral or slightly basic conditions lead to very weak binding. These data indicate that for certain serotypes, AAVR may play a prominent role in trafficking AAV to the Golgi rather than acting as a host cell receptor. Information obtained from these combinatorial biophysical methods can be used to engineer future generations of AAVs to have better transduction efficiency.

High-sensitivity and high-resolution therapeutic antibody charge variant and impurity characterization by microfluidic native capillary electrophoresis-mass spectrometry.

Therapeutic antibodies are a major class of pharmaceutical drugs used to treat a wide variety of diseases. They have several advantages including the high specificity and binding affinity to their molecular targets, and generally low immunotoxicity and mild adverse effects. The characterization of therapeutic antibodies is crucial to ensure drug efficacy and safety. Charge variant analysis can be used to examine the charge variant forms of therapeutic antibodies, which may reflect modifications that impact the drug quality. Native capillary electrophoresis-mass spectrometry (nCE-MS) analysis by an integrated ZipChip CE-MS system is an alternative and complementary method to cation-exchange chromatography and imaged capillary isoelectric focusing to support the characterization of charge variants. In this study, we performed nCE-MS analysis to evaluate the charge variants and impurities in therapeutic antibodies including immunoglobin G (IgG) monoclonal antibodies (mAbs), bispecific antibodies (bsAbs), and alternative formats such as therapeutic antibodies with addition or removal of antigen-binding domain. With the ZipChip CE-MS system, high-resolution charge variant separation was achieved for different types of therapeutic antibodies. Moreover, ZipChip nCE-MS analysis enabled high-sensitivity detection and identification of species with low abundance, including proteolytic cleavage and fragmentation in mAb, monospecific mAb impurities in bsAb, and O-glycosylation in alternative formats to support biopharmaceutical development and investigations.

A single-nucleotide resolution capillary gel electrophoresis workflow for poly(A) tail characterization in the development of mRNA therapeutics and vaccines.

The 3' poly(A) tail is an important component of messenger RNA (mRNA). The length of the poly(A) tail has direct impact on the stability and translation efficiency of the mRNA molecule and is therefore considered to be a critical quality attribute (CQA) of mRNA-based therapeutics and vaccines. Various analytical methods have been developed to monitor this CQA. Methods like ion-pair reversed-phase liquid chromatography (IPRP-LC) can be used to quantify the percentage of mRNA with poly(A) tail but fail to provide further information on the actual length of poly(A). High-resolution methods such as liquid chromatography coupled with mass spectrometry (LC-MS) or next generation sequencing (NGS) can separate poly(A) tail length by one nucleotide (n/n + 1 resolution) but are complicated to implement for release testing of manufactured mRNA. In this study, a workflow utilizing capillary gel electrophoresis (CGE) for characterizing the poly(A) tail length of mRNA was developed. The CGE method demonstrated resolution comparable with the LC-MS method. With UV detection and the addition of poly(A) length markers, this method can provide poly(A) tail length information and can also provide quantitation of each poly(A) length, making it a suitable release method to monitor the CQA of poly(A) tail length.

Human Serum Albumin Mitigates Formation of Fatty Acid Particles in Polysorbate-Containing Solutions.

Over seventy percent of marketed monoclonal antibody therapeutics contain between 0.001% and 0.1% (w/v) polysorbate, as it has a generally beneficial stabilizing effect that increases drug product shelf life. However, polysorbate has also been shown to contribute to particle formation due to auto-oxidation and hydrolysis,1 which results in free fatty acids and subsequent fatty acid particle formation. Although the impact of fatty acid particles on the safety and efficacy of drug products has not been fully evaluated, it is advantageous to mitigate particle formation due to degradation of polysorbate, improving the consistency of a product's quality attributes (in this case particulate levels) throughout its lifecycle. In this report, we describe a simple experimental assay to rapidly generate fatty acid particles. Further, we show that the presence of human serum albumin (HSA) is sufficient to prevent the formation of fatty acid particles. Separately, we demonstrate that HSA can also rapidly and completely solubilize pre-formed particles. These results point to a highly plausible mechanistic explanation of previous observations and diminishes concern regarding low levels of particles in the final drug product.

Deciphering the High Viscosity of a Therapeutic Monoclonal Antibody in High Concentration Formulations by Microdialysis-Hydrogen/Deuterium Exchange Mass Spectrometry.

High concentration formulations of therapeutic monoclonal antibodies (mAbs) are highly desired for subcutaneous injection. However, high concentration formulations can exhibit unusual molecular behaviors, such as high viscosity or aggregation, that present challenges for manufacturing and administration. To understand the molecular mechanism of the high viscosity exhibited by high concentration protein formulations, we analyzed a human IgG4 (mAb1) at high protein concentrations using sedimentation velocity analytical ultracentrifugation (SV-AUC), X-ray crystallography, hydrogen/deuterium exchange mass spectrometry (HDX-MS), and protein surface patches analysis. Particularly, we developed a microdialysis HDX-MS method to determine intermolecular interactions at different protein concentrations. SV-AUC revealed that mAb1 displayed a propensity for self-association of Fab-Fab, Fab-Fc, and Fc-Fc. mAb1 crystal structure and HDX-MS results demonstrated self-association between complementarity-determining regions (CDRs) and Fc through electrostatic interactions. HDX-MS also indicated Fab-Fab interactions through hydrophobic surface patches constructed by mAb1 CDRs. Our multi-method approach, including fast screening of SV-AUC as well as interface analysis by X-ray crystallography and HDX-MS, helped to elucidate the high viscosity of mAb1 at high concentrations as induced by self-associations of Fab-Fc and Fab-Fab.

Cytokine traps: multi-component, high-affinity blockers of cytokine action.

Cytokines can initiate and perpetuate human diseases, and are among the best-validated of therapeutic targets. Cytokines can be blocked by the use of soluble receptors; however, the use of this approach for cytokines such as interleukin (IL)-1, IL-4, IL-6 and IL-13 that use multi-component receptor systems is limited because monomeric soluble receptors generally exhibit low affinity or function as agonists. We describe here a generally applicable method to create very high-affinity blockers called 'cytokine traps' consisting of fusions between the constant region of IgG and the extracellular domains of two distinct cytokine receptor components involved in binding the cytokine. Traps potently block cytokines in vitro and in vivo and represent a substantial advance in creating novel therapeutic candidates for cytokine-driven diseases.

VEGF Trap complex formation measures production rates of VEGF, providing a biomarker for predicting efficacious angiogenic blockade.

VEGF is the best characterized mediator of tumor angiogenesis. Anti-VEGF agents have recently demonstrated impressive efficacy in human cancer trials, but the optimal dosing of such agents must still be determined empirically, because biomarkers to guide dosing have yet to be established. The widely accepted (but unverified) assumption that VEGF production is quite low in normal adults led to the notion that increased systemic VEGF levels might quantitatively reflect tumor mass and angiogenic activity. We describe an approach to determine host and tumor production of VEGF, using a high-affinity and long-lived VEGF antagonist now in clinical trials, the VEGF Trap. Unlike antibody complexes that are usually rapidly cleared, the VEGF Trap forms inert complexes with tissue- and tumor-derived VEGF that remain stably in the systemic circulation, where they are readily assayable, providing unprecedented capability to accurately measure VEGF production. We report that VEGF production is surprisingly high in non-tumor-bearing rodents and humans, challenging the notion that systemic VEGF levels can serve as a sensitive surrogate for tumor load; tumor VEGF contribution becomes significant only with very large tumor loads. These findings have the important corollary that anti-VEGF therapies must be sufficiently dosed to avoid diversion by host-derived VEGF. We further show that our assay can indicate when VEGF is optimally blocked; such biomarkers to guide dosing do not exist for other anti-VEGF agents. Based on this assay, VEGF Trap doses currently being assessed in clinical trials are in the efficacious range.

A Biparatopic Antibody That Modulates MET Trafficking Exhibits Enhanced Efficacy Compared with Parental Antibodies in MET-Driven Tumor Models.

PURPOSE: Recent clinical data demonstrate that tumors harboring MET genetic alterations (exon 14 skip mutations and/or gene amplification) respond to small-molecule tyrosine kinase inhibitors, validating MET as a therapeutic target. Although antibody-mediated blockade of the MET pathway has not been successful in the clinic, the failures are likely the result of inadequate patient selection strategies as well as suboptimal antibody design. Thus, our goal was to generate a novel MET blocking antibody with enhanced efficacy. EXPERIMENTAL DESIGN: Here, we describe the activity of a biparatopic MET×MET antibody that recognizes two distinct epitopes in the MET Sema domain. We use a combination of in vitro assays and tumor models to characterize the effect of our antibody on MET signaling, MET intracellular trafficking, and the growth of MET-dependent cells/tumors. RESULTS: In MET-driven tumor models, our biparatopic antibody exhibits significantly better activity than either of the parental antibodies or the mixture of the two parental antibodies and outperforms several clinical-stage MET antibodies. Mechanistically, the biparatopic antibody inhibits MET recycling, thereby promoting lysosomal trafficking and degradation of MET. In contrast to the parental antibodies, the biparatopic antibody fails to activate MET-dependent biological responses, consistent with the observation that it recycles inefficiently and induces very transient downstream signaling. CONCLUSIONS: Our results provide strong support for the notion that biparatopic antibodies are a promising therapeutic modality, potentially having greater efficacy than that predicted from the properties of the parental antibodies.

Mitigating target interference in bridging immunogenicity assay with target-blocking reagents and mild basic pH.

Background: Soluble drug target in clinical study samples generated false positive results in anti-drug antibody (ADA) bridging assays due to target-mediated bridging. Results: The combination of two target-blocking reagents and mild basic assay pH resulted in high tolerance to recombinant target protein and reduced levels of positivity in clinical study samples with pharmacokinetic profiles that did not indicate significant ADA response. Testing with low-affinity ADA positive serum from immunized rabbits and known ADA positive samples from nonclinical studies in rats confirmed the assay's ability to detect ADA positive samples and the minimal impact of basic pH and target-blocking reagents on ADA detection. Conclusion: These strategies provide alternatives for mitigating target interference when standard target-blocking antibodies alone are ineffective.

Matrix interference from Fc-Fc interactions in immunoassays for detecting human IgG4 therapeutics.

BACKGROUND: An assay measuring an IgG4 biotherapeutic in human serum used a drug-specific monoclonal antibody (mAb) capture reagent and an antihuman IgG4 mAb as detection reagent. However, serum IgG4 binding to the capture mAb via Fc-interactions was detected by the anti-IgG4 mAb, causing high background. RESULTS: Two approaches were developed to minimize background; incorporating a mild acid sample preparation step or using the Fab of the capture antibody. Either strategy improved signal:noise dramatically, increasing assay sensitivity >20-fold. Biophysical analyses of antibody domains indicated that noncovalent Fc oligomers could inhibit the background. CONCLUSION: Matrix interference from human IgG4 binding to the capture mAb was reduced with a Fab fragment of the drug-specific capture antibody or by incorporating a mild acid sample treatment into the assay.