Arterial spin labeling shows cortical collateral flow in the endovascular treatment of vasospasm after post-traumatic subarachnoid hemorrhage.

We report here on the case of a patient who, 10 days prior to his admission to hospital, had suffered a bicycle accident. He presented with signs of minor dysphasia. A brain CT-scan revealed slight subarachnoid hemorrhage (SAH) in the left sylvian fissure as well as narrowing of the distal M1 segment of the left middle cerebral artery (MCA) on CT-angiography. MRI showed diffusion abnormalities and hypoperfusion in the left MCA territory with cortical hyperperfusion on arterial spin labeling (ASL). Arteriography confirmed the vasospasm, but showed no sign of aneurysm. Angioplasty of the narrowed MCA was successful, and follow-up MRI showed reperfusion of the MCA territory.

Methodologies to assess blood flow in cerebral aneurysms: current state of research and perspectives.

With intracranial aneurysms disease bringing a weakened arterial wall segment to initiate, grow and potentially rupture an aneurysm, current understanding of vessel wall biology perceives the disease to follow the path of a dynamic evolution and increasingly recognizes blood flow as being one of the main stakeholders driving the process. Although currently mostly morphological information is used to decide on whether or not to treat a yet unruptured aneurysm, among other factors, knowledge of blood flow parameters may provide an advanced understanding of the mechanisms leading to further aneurismal growth and potential rupture. Flow patterns, velocities, pressure and their derived quantifications, such as shear and vorticity, are today accessible by direct measurements or can be calculated through computation. This paper reviews and puts into perspective current experimental methodologies and numerical approaches available for such purposes. In our view, the combination of current medical imaging standards, numerical simulation methods and endovascular treatment methods allow for thinking that flow conditions govern more than any other factor fate and treatment in cerebral aneurysms. Approaching aneurysms from this perspective improves understanding, and while requiring a personalized aneurysm management by flow assessment and flow correction, if indicated.

Reproducibility of haemodynamical simulations in a subject-specific stented aneurysm model--a report on the Virtual Intracranial Stenting Challenge 2007.

This paper presents the results of the Virtual Intracranial Stenting Challenge (VISC) 2007, an international initiative whose aim was to establish the reproducibility of state-of-the-art haemodynamical simulation techniques in subject-specific stented models of intracranial aneurysms (IAs). IAs are pathological dilatations of the cerebral artery walls, which are associated with high mortality and morbidity rates due to subarachnoid haemorrhage following rupture. The deployment of a stent as flow diverter has recently been indicated as a promising treatment option, which has the potential to protect the aneurysm by reducing the action of haemodynamical forces and facilitating aneurysm thrombosis. The direct assessment of changes in aneurysm haemodynamics after stent deployment is hampered by limitations in existing imaging techniques and currently requires resorting to numerical simulations. Numerical simulations also have the potential to assist in the personalized selection of an optimal stent design prior to intervention. However, from the current literature it is difficult to assess the level of technological advancement and the reproducibility of haemodynamical predictions in stented patient-specific models. The VISC 2007 initiative engaged in the development of a multicentre-controlled benchmark to analyse differences induced by diverse grid generation and computational fluid dynamics (CFD) technologies. The challenge also represented an opportunity to provide a survey of available technologies currently adopted by international teams from both academic and industrial institutions for constructing computational models of stented aneurysms. The results demonstrate the ability of current strategies in consistently quantifying the performance of three commercial intracranial stents, and contribute to reinforce the confidence in haemodynamical simulation, thus taking a step forward towards the introduction of simulation tools to support diagnostics and interventional planning.

Anomalous intracranial drainage of the nasal mucosa: a vein of the foramen caecum?

The existence of the vein of the foramen caecum (VFC) in humans is still controversial. We present 2 patients with intracranial drainage of the nasal mucosa by a frontal cortical vein into a superior sagittal sinus, demonstrated by digital subtraction angiography. In both, the position of the intracranial passage was found to be slightly paramedian. An analogy to the VFC is made.

The perianeurysmal environment: influence on saccular aneurysm shape and rupture.

PURPOSE: The purpose of this study was to evaluate whether interactions between intracranial cerebral saccular aneurysms and the perianeurysmal environment (PAE), in the form of contact constraints, influence aneurysm shape and risk of rupture. METHODS: A total of 190 consecutive aneurysms during a 34-month period were retrospectively analyzed. Of these, 124 were ruptured (group 1) and 66 were unruptured (group 2). Pretreatment high-resolution CT angiography was available for each aneurysm and was the determinant inclusion criterion. Aneurysm size and location, type of hemorrhage, initial Glasgow Coma Scale rating, World Federation of Neurological Societies grade, Fisher grade, and presence of concomitant aneurysms were recorded. Contact constraints between aneurysms and anatomical structures of the PAE were identified for each aneurysm and further subdivided into balanced or unbalanced depending on whether contact constraints occurred symmetrically on the aneurysm wall. Regular or irregular shape was recorded and correlated to contact constraints. RESULTS: Compared with unruptured aneurysms, ruptured aneurysms were found to be larger and more irregular, to develop more contact constraints with the PAE, and to show higher rates of unbalanced contact constraints. Ruptured aneurysms had a tendency to be found in locations of a constraining PAE. Irregular shape was positively correlated with the presence of an unbalanced contact constraint, even in the absence of obvious contour deformations from an imprint of an adjacent structure. CONCLUSION: The existence of contact constraints between intracranial saccular aneurysms and the PAE were shown to influence shape and risk of aneurysm rupture. Modifications of wall shear stress by contact constraints are discussed. Analysis of contact constraints between aneurysm and the PAE could be considered additional parameters in the assessment of risk of aneurysm rupture.

Conformability of balloon-expandable stents to the carotid siphon: an in vitro study.

BACKGROUND AND PURPOSE: Endovascular placement of coronary balloon-expandable stents in patients with recurrent cerebral ischemia has emerged as a treatment option for intracranial arterial occlusive disease. We have developed an in vitro model matching the tortuous curve of the carotid siphon that allows the assessment of apposition of stents to a curved vessel wall. METHODS: Six types of balloon-expandable coronary stents were implanted in a silicone model of the carotid siphon. Digital radiographs and 3D rotational angiograms were obtained. Stent morphology was evaluated and the degree of apposition between stent and wall of the model was measured on a digital workstation. RESULTS: All 6 stents showed lack of apposition between stent and the wall at the convexity of the anterior segment of the carotid siphon and the wall at the concavity at both extremities of the stent. In and around the curve, the modules of the stents did not expand completely to their nominal diameter and were distorted to an oval shape. CONCLUSION: The tested coronary balloon-expandable stents did not completely conform to the vessel wall of the model of the carotid siphon and further development is needed to approach the goal of an "ideal intracranial stent."

Organic solvents as vehicles for precipitating liquid embolics: a comparative angiotoxicity study with superselective injections of swine rete mirabile.

BACKGROUND AND PURPOSE: The organic solvent dimethyl-sulfoxide (DMSO), as a commonly used vehicle for nonadhesive liquid embolics, is not devoid of local angiotoxic effects. We compared microvascular toxicities of superselective infusions of DMSO with potentially more compatible solvents in swine rete mirabile. METHODS: Fourteen swine underwent angiography for superselective catheterization of 28 arteries of the rete while electrocardiography and intra-arterial pressure were continuously monitored. The investigated solvents were DMSO, dimethyl isosorbide (DMI), ethyl lactate, glycofurol 75, N-methyl pyrrolidone (NMP), and solketal. Control infusion of saline ruled out catheter induced vasospasm in all cases. Each artery of the rete was infused only once with 0.8 mL of one of the solvents over 60 seconds. Acute angiographic and hemodynamic consequences were evaluated. Blood samples were assessed for signs of intravascular hemolysis. Brains and retia were harvested for gross and histopathologic investigation. RESULTS: On the basis of the angiographic data, DMSO induced the most pronounced vasospasm with the longest recovery period of all solvents investigated. Ethyl lactate, glycofurol 75, and solketal elicited less severe vasospasms and accordingly resolved much more quickly. DMI and NMP induced only minimal vasospasms with comparably short duration. No solvent caused significant hemodynamic alterations or hemolysis. Gross inspection of brains showed no abnormalities, whereas histopathologic examination revealed mostly nonspecific findings. One rete exposed to solketal displayed possible causal histotoxic changes. CONCLUSION: DMI and NMP produced far less vasospasm than DMSO. No changes in hemodynamic or hemolytic parameters and no histopathologic findings were observed with infusion of these solvents.

Embolization of experimental wide-necked aneurysms with iodine-containing polyvinyl alcohol solubilized in a low-angiotoxicity solvent.

BACKGROUND AND PURPOSE: To evaluate the ready-to-use iodine-containing polyvinyl alcohol (I-PVA) dissolved in the low angiotoxic solvent N-methyl pyrrolidone (NMP) for embolization of porcine wide-necked aneurysms. METHODS: Fourteen broad-based carotid sidewall aneurysms were surgically constructed in 7 swine. I-PVA (40%) in NMP was injected under temporary balloon occlusion bridging the aneurysm neck. After 4 weeks, follow-up angiography, multisection CT angiography (MSCTA), and 3T MR imaging including MR angiography (MRA) sequences were performed. Afterward, harvested aneurysms were investigated histopathologically. RESULTS: The liquid embolic was well visible under fluoroscopy and displayed a favorable precipitation pattern, allowing for controlled polymer delivery. Ten aneurysms (71%) were initially completely occluded, whereas in 1 aneurysm, a minimal polymer leakage was observed. The other 4 aneurysms (29%) were almost completely occluded. One animal suffered a lethal rebleeding from the anastomosis after uneventful embolization. Aneurysms embolized with I-PVA could be discriminated well from the parent artery without beam-hardening artifacts on MSCTA, and no susceptibility artifacts were encountered on MR imaging. Histologic examination revealed all aneurysms covered with a membrane of fibroblasts and an endothelial cell layer while a moderate intraaneurysmal inflammatory response to the polymer was observed. CONCLUSION: I-PVA dissolved in NMP has proved its effectiveness for the embolization of experimental wide-necked aneurysms. This precipitating liquid embolic offers several interesting features in that it needs no preparation before use and no radiopaque admixtures, the latter allowing for artifact-free evaluation of treated aneurysms with MSCTA and MRA. Moreover, it uses NMP as a solvent, which has only a low angiotoxicity.

From patient to model: stereolithographic modeling of the cerebral vasculature based on rotational angiography.

We developed a method to produce tubular in vitro models of the cerebral vessels from real patient data. Three-dimensional data sets obtained from patients undergoing rotational angiography were used for stereolithographic biomodeling by using rapid prototyping technology. In a second step, tubular reproductions of the cerebral vessels were obtained by using the lost-wax technique. These reproductions can be useful for hemodynamic research and for the development and preclinical evaluation of new endovascular treatment methods.

The Dural AV-Fistula (DAVF), the Most Frequent Acquired Vascular Malformation of the Central Nervous System (CNS).

Acquired arteriovenous malformations, such as is the case with dural arteriovenous fistulae (DAVF), are the consequence of a pathological new arterial ingrowth into venous spaces that reaches directly the venous lumen, without interposition of a capillary network, thereby creating an AV-shunt.The following concise text will provide elements in regards to diagnosis, indication for treatment discussion and choice of endovascular treatment (EVT) method.

Role of the distal balloon protection technique in the prevention of cerebral embolic events during carotid stent placement.

BACKGROUND AND PURPOSE: We sought to quantitatively and qualitatively evaluate the release of atheromatous plaque debris induced by carotid stenting procedures. METHODS: Eight patients with severe carotid atheromatous stenoses were treated by stent implantation under distal balloon protection. Blood samplings were obtained after stent deployment in the blood pooled below the inflated protection balloon. The samples were centrifuged and evaluated for plaque debris with the use of light microscopy. The debris release was quantitatively estimated by dividing the total volume of debris obtained by the mean debris size. Five patients without endovascular procedure were used as a control group. RESULTS: The 2 main debris types found were nonrefringent cholesterol crystals (4 to 389 microm; 115 to 8697 in number) and lipoid masses (7 to 600 microm; 341 to 34 000 in number). There was a statistically significant difference compared with the samples obtained in the control group (P:=0.017). CONCLUSIONS: Blood samples collected during stent implantation procedures contain a large quantity of atheromatous plaque debris. This emphasizes the role of distal protection techniques in avoiding migration of this plaque material into the cerebral circulation.

Delayed visual loss due to trauma of the internal carotid artery.

The group of six patients in this study experienced delayed visual loss following head trauma. Visual loss occurred from 1 day to 13 years after the initial injury. All patients suffered indirect trauma to the internal carotid artery resulting in formation of either an aneurysm or pseudoaneurysm or a carotid-cavernous fistula. Review of the radiologic and clinical findings was performed in six patients. The diagnosis was established by computed tomography, magnetic resonance imaging, and angiography. All patients had follow-up clinical evaluation and imaging studies. Treatment by neurosurgical or interventional neuroradiologic procedures resulted in significant visual improvement in five patients. Different pathophysiologic mechanisms could be correlated with the delayed visual loss produced by the two types of lesions. The pathologic changes associated with the aneurysms/pseudoaneurysms included direct compression of optic nerves and/or chiasm and intracranial hematoma. A carotid-cavernous fistula caused delayed visual loss by either hematoma at the orbital apex or compression of the chiasm and/or optic nerves by saccular dilatation of the cavernous sinus. The delayed onset of decreased vision following head trauma should alert the physician to the possibility of a traumatic aneurysm/pseudoaneurysm or a carotid-cavernous fistula. Different neuro-ophthalmologic symptoms can usually be correlated with the pathologic changes demonstrated by neuroimaging procedures.

Vertebroplasty: clinical experience and follow-up results.

This study was undertaken to report the clinical experience with percutaneous minimal invasive vertebroplasty using polymethyl-methacrylcate (PMMA) for a consecutive group of patients. Over the period of the last 4 years, 40 patients were treated at 68 vertebral segment levels with the intention to relieve pain related to vertebral body lesions. Reduced vertebral body height and destruction of the posterior vertebral wall were not considered to be exclusion criterias. The vertebroplasty procedure was performed under general anesthesia and in prone position with imaging control using mostly biplane DSA fluoroscopic guidance, and rarely with single-plane mobile DSA combined with computed tomographic guidance. Unilateral, but more frequently bilateral, transpedicular introduction of a 2-3-mm OD needle was followed by an injection of polymethyl-methacrylcate (PMMA). PMMA preparation involved a diluted mixture (20 mL powder for 5 mL liquid) allowing for an extended polymerization time of up to 8 min. The PMMA was mixed with metallic powder to enhance its radio-opacity. Before PMMA injection, a vertebral phlebography was obtained to evaluate the filling pattern and identify sites of potential PMMA leakage. Injection of opacified PMMA was performed under continuous visual control with fluoroscopy to obtain adequate filling and to avoid important PMMA leakage. Clinical follow-up involved an evaluation using a questionnaire for assessment of pain, pain medication, and mobility. One to six levels were treated in one to three treatment sessions for patients with metastatic, osteoporotic, and hemangiomatous lesions of the vertebral bodies who presented with pain. The results observed matched those reported previously with a success rate of approximately 80% and a complication rate below 6% per treated level. Treatment failure and complications observed were related to leakage, insufficient pretreatment evaluation, anesthesia, or patient position during treatment. Image guidance with fluoroscopy was efficient both for precise transpedicular approach and PMMA implantation control. Vertebroplasty is very efficient for treatment of pain. Treatment failure was mostly related to insufficient pretreatment clinical evaluation, and complication due to excessive PMMA volume injection. Control of PMMA volume seems to be the most critical point for avoiding complications. A good fluoroscopy control is therefore mandatory.

Pathology findings with acrylic implants.

We report the pathological findings in cases of acrylic implants obtained by direct intratumoral injection of polymethyl-methacrylate (PMMA) and N-butyl-cyano-acrylate (NBCA). Direct intratumoral injection of acrylic implants was performed for a variety of primary and secondary bone lesions. These types of treatments have been used at our institution in the last 4 years for 40 vertebroplasty (PMMA) procedures and for nine bone lesions of other locations (PMMA, NBCA). Postmortem histology became available for 1 case of PMMA and for 5 cases with NBCA intratumoral acrylic implants. The pathological findings associated with PMMA and NBCA were evaluated and compared. PMMA exhibited a macroscopic and microscopic rim of tumor necrosis, 6 months after implantation. NBCA exhibited compressive effects on the nearby tumor tissue, however, without signs of significant necrosis outside the acrylic tumor cast. Tumor captured inside the acrylic cast showed extensive to near complete necrosis. Acrylic implants may lead to necrosis when injected directly in tumors. The necrotizing effect may extend beyond the limits of an implant in the case of PMMA. Such an extended effect of PMMA, when compared with NBCA, may be due to the variable toxicity of acrylic implants, including the different degrees of the exothermic reaction during polymerization.

Discrepancies between HMPAO and ECD SPECT imaging in brain tumors.

Among several brain radiopharmaceuticals for SPECT imaging, 99mTc complexes of HMPAO and ECD are the most widely used. They are considered to be equal in their capacity to reflect regional cerebral blood flow; but discrepancies between HMPAO and ECD brain uptake have been reported in stroke patients. This paper reports our observations regarding discrepancies between HMPAO and ECD SPECT in 14 of 23 patients with suspected brain tumors or presumed metabolic cerebral abnormalities. We obtained similar conflicting results, namely focal HMPAO hyperactivities and isoactive ECD SPECT. The majority of these discrepancies were found in patients with brain tumors (10 of 13 patients), while only 4 of the 10 remaining patients with nontumoral process showed similar discrepant results. The physiopathology behind these observations is discussed here, and it is likely to be related to the specific response to cellular metabolic disorders rather than to perfusion disturbances.

Radiopaque polymeric materials for medical applications. Current aspects of biomaterial research.

The aim of this review is to give an overview and some insight into different radiopaque polymeric materials that are currently used as medical implants or inserts. The advantages and limitations of each radiopaque polymeric material are summarized. The main method used to make medical implants radiologically visible is based on blending polymers with conventional radiopaque agents, blends which usually are a physical mixture of acrylic derivatives and inorganic salts. Other methods reported involve either the formation of single-phase radiopaque polymer salt complexes somehow preventing the release of the radiopacifying element by entrapment of the complex in a crosslinked network, or radiopaque polymerized monomers characterized by a radiopacifying element associated with the monomer unit prior to polymerization. In the near future, research will certainly concentrate on biocompatible radiopaque polymers with covalently bound opaque elements leading to stable polymers with properties equivalent to the nonopaque, parent polymer.

In vitro assessment of new embolic liquids prepared from preformed polymers and water-miscible solvents for aneurysm treatment.

Treatment of cerebral aneurysms by embolic liquids has been proposed as an alternative strategy to coil or balloon techniques. In order to assess the feasibility of this approach, a general screening of preformed polymers dissolved in biocompatible, water-miscible solvents has been carried out. The solubilizing capacity of the solvents has been evaluated by the solubility parameters approach. The viscosity of the solutions has been determined and the precipitation characteristics of the embolic liquids have been investigated in phosphate buffer solution pH 7.4 at 37 degrees C to mimic physiological conditions. The radiopaque agent bismuth (III) oxide was added to solutions having appropriate precipitation characteristics and the angiographic assessment, in an in vitro aneurysm model, were consistent with the precipitation properties and confirmed that only hard and coherent masses allowed satisfactory embolization. However, the solubilizing prediction using the calculation of the solubility parameters was only partially successful owing to the highly hydrophilic functional groups of the chosen solvents. This failing justifies the experimental screening that was carried out. This study pointed out that the frequently used solvent dimethyl sulfoxide could be replaced by more biocompatible solvents offering the possibility of using other preformed polymers. In conclusion, nine solutions of the selected polymer-solvent combinations could be used as embolic liquids for the treatment of cerebral aneurysms with respect to their satisfactory precipitation properties and viscosity.

Iodine-containing cellulose mixed esters as radiopaque polymers for direct embolization of cerebral aneurysms and arteriovenous malformations.

The present study deals with the synthesis and characterization of radiopaque polymers which could, when solubilized in an appropriate water-miscible solvent, be useful embolic materials for the treatment of cerebral aneurysms and arteriovenous malformations. For this purpose cellulose (both microcrystalline and powdered) and partially substituted cellulose acetate (two different viscosity grades) were selected as starting materials to prepare iodine-containing polymers through various synthetic routes. The materials obtained were characterized by IR and NMR spectroscopy, molecular weight, iodine content, radiopacity and solubility in selected injectable organic solvents. The embolic liquids were evaluated for their precipitation behavior in a phosphate buffer solution (pH 7.4) mimicking physiological conditions using an in vitro aneurysm model. A sheep model was also used to assess in vivo the radiopacity and precipitation properties of a highly concentrated solution of a cellulose acetate 2,3,4-triiodobenzoate mixed ester. All materials with 4-iodo- and 2,3,5-triiodobenzoyl groups gave sufficient radiopacity to be regarded as possible embolization materials, whereas iododeoxycellulose and iododeoxycellulose acetate were not radiopaque because of their low iodine content. Esters synthesized using cellulose as starting material were not soluble in the selected organic solvents due to the presence of many residual hydroxyl groups, but could be used for other biomedical applications where insoluble radiopaque materials are used. In contrast, solubility of the materials as well as satisfactory precipitation properties were ensured using cellulose acetate as the starting material. In conclusion, cellulose acetate iodobenzoate mixed esters dissolved in diglyme or dimethyl isosorbide (dimethyl sulfoxide is probably less appropriate because of its toxicity and hemolytic properties) could be useful embolic liquids for the treatment of cerebral aneurysms or arteriovenous malformations.

Risk factors leading to cerebral arterial rupture by intravascular balloon.

PURPOSE: To clarify what is safe use of balloons in interventional neuroradiologic procedures. METHODS: Critical parameter values of balloon inflation and cerebral artery dilatation and rupture were determined. Dimensions and internal pressure were measured for a variety of latex and silicone balloons during inflation in both unconstrained and constrained environments including glass tubes, cadaveric human cerebral arteries, and canine basilar arteries. RESULTS: For unconstrained inflation, pressures within balloons inflated to the recommended maximum volume ranged from 200 to 650 mm Hg. When constrained, pressures became much higher for the same injected fluid volume. Balloon dilatation until artery rupture occurred only for balloons with diameters greater than 2.5 times the unstretched vessel diameter. Balloon pressures at vessel rupture ranged from 1000 to 2000 mm Hg. CONCLUSION: Pressures within inflated balloons vary with balloon type, material, degree of inflation, and constraint. Constrained balloons have markedly higher internal pressures, which may lead to vessel rupture if balloons are much larger than the vessel diameter.

Embolization of spinal dural arteriovenous fistula with polyvinyl alcohol particles: experience in 14 patients.

PURPOSE: To assess the effectiveness, initial and long term, of embolization using polyvinyl alcohol particles (PVA) particles in patients with spinal dural arteriovenous fistulas (SDAVF). METHODS: The initial treatment in 14 patients with SDAVF was embolization with PVA particles. Postembolization occlusion of the SDAVF was documented angiographically in all cases. RESULTS: All 14 patients initially showed an improvement in clinical symptoms, but the neurologic status of 11 patients subsequently deteriorated. Of the 11 patients who had recurrence of symptoms, nine had angiographically proven recurrences of their SDAVF while two had negative follow-up of spinal angiography. PVA embolization is ineffective for the treatment of SDAVF and is not without risk. CONCLUSION: On the basis of a literature review of the other two alternative treatments (operation or liquid adhesive embolization) available for SDAVF and our preliminary experience with N-butyl cyanoacylate (NBCA) embolization, we suggest that NBCA embolization be the initial treatment of choice for SDAVF; if that procedure is not possible, or is unsuccessful, then operation is recommended.