RESUMEN
Very high surface area, self-assembled, highly crystalline mesoporous SrTiO3 (STO) thin films were developed for photoelectrochemical water splitting. Much improved performance of these mesoporous films compared to planar STO thin films and any other form of STO such as single crystal samples and nanostructures was demonstrated. The high performance resulted from very large surface area films and optimization of carrier concentration.
RESUMEN
We report on nanoengineered SrTiO3-Sm2O3 nanocomposite thin films with the highest reported values of commutation quality factor (CQF or K-factor) of >2800 in SrTiO3 at room temperature. The films also had a large tunability of dielectric constant (49%), low tangent loss (tan δ = 0.01) and a Curie temperature for SrTiO3 > 300 °C, making them very attractive for tunable RF applications. The enhanced properties originate from the unique nanostructure in the films, with <20 nm diameter strain-controlling Sm2O3 nanocolumns embedded in a SrTiO3 matrix. Very large out-of-plane strains (up to 2.6%) and high tetragonality (c/a) (up to 1.013) were induced in the SrTiO3. The K-factor was further enhanced by adding 1 at% Sc3+ (acceptor) dopant in SrTiO3 to a value of 3300 with the tangent loss being ≤0.01 up to 1000 kV cm-1.
RESUMEN
Thermoelectric materials, capable of interconverting heat and electricity, are attractive for applications in thermal energy harvesting as a means to power wireless sensors, wearable devices, and portable electronics. However, traditional inorganic thermoelectric materials pose significant challenges due to high cost, toxicity, scarcity, and brittleness, particularly when it comes to applications requiring flexibility. Here, we investigate organic-inorganic nanocomposites that have been developed from bespoke inks which are printed via an aerosol jet printing method onto flexible substrates. For this purpose, a novel in situ aerosol mixing method has been developed to ensure uniform distribution of Bi2Te3/Sb2Te3 nanocrystals, fabricated by a scalable solvothermal synthesis method, within a poly(3,4-ethylenedioxythiophene) polystyrene sulfonate matrix. The thermoelectric properties of the resulting printed nanocomposite structures have been evaluated as a function of composition, and the power factor was found to be maximum (â¼30 µW/mK2) for a nominal loading fraction of 85 wt % Sb2Te3 nanoflakes. Importantly, the printed nanocomposites were found to be stable and robust upon repeated flexing to curvatures up to 300 m-1, making these hybrid materials particularly suitable for flexible thermoelectric applications.