Assessing transparency practices in dental randomized controlled trials.

BACKGROUND: To evaluate transparency practices in randomized controlled trials (RCTs) in dentistry. METHODS: This meta-research study included RCTs in dentistry regardless of topic, methods, or level of detail reported. Only studies in English were considered. We searched PubMed for RCTs in dentistry published in English from December 31, 2016, to December 31, 2021. The screening was performed in duplicate, and data extracted included journal and author details, dental specialty, protocol registration, data and code sharing, conflict of interest declaration, and funding information. A descriptive analysis of the data was performed. We generated maps illustrating the reporting of transparency items by country of the corresponding author and a heat table reflecting reporting levels by dental specialty. RESULTS: A total of 844 RCTs were included. Only 12.86% of studies reported any information about data and code sharing. Protocol registration was reported for 50.36% of RCTs. Conflict of interest (83.41%) and funding (71.68%) declarations were present in most studies. Conflicts of interest and funding were consistently reported regardless of country or specialty, while data and code sharing had a low level of reporting across specialties, as well as low dissemination across the world. Protocol registration exhibited considerable variability. CONCLUSIONS: Considering the importance of RCTs for evidence-based dentistry, it is crucial that everyone who participates in the scientific production and dissemination process actively and consistently promotes adherence to transparent scientific standards, particularly registration of protocols, and sharing of data and code.

Structural Relationships between Asthma and Dental Caries in Children: A Birth Cohort Study in Southern Brazil.

INTRODUCTION: There is an inconclusive causal association between asthma symptoms and dental caries in the primary dentition. This study aimed to investigate, using SEM (structural equation modeling), a possible causal relation between asthma and dental caries in the primary dentition. METHODS: Using data from the 2004 Pelotas Birth Cohort Study, a sub-sample of 1,303 individuals was selected. Dental caries was clinically evaluated at 5 years old based on decayed, missing, and filled tooth (dmft) index criteria. Asthma-related symptoms (wheezing and shortness of breath) at 1- and 4-year-olds composed a latent variable and were the main exposures to caries occurrence. SEM was used to identify possible direct, indirect, and mediated effects of asthma in primary dentition dental caries. RESULTS: The general prevalence of caries at age 5 was 1.95 (SD: 3.56). When comparing the dmft values for children with asthma symptoms and those without, they presented similar values in both periods where asthma symptoms were evaluated (1- and 4-year-old). SEM analysis showed that asthma was neither directly nor indirectly related to dental caries. CONCLUSION: Asthma, using a latent variable constructed based on asthma symptoms, showed no causal effect on dental caries occurrence in the primary dentition.

Influence of CAD-CAM milling strategies on the outcome of indirect restorations: A scoping review.

STATEMENT OF PROBLEM: The influence of computer-aided manufacturing (CAM) parameters and settings on the outcomes of milled indirect restorations is poorly understood. PURPOSE: The purpose of this scoping review was to summarize the current CAM systems, parameters, and setting changes, and their effects on different outcomes of milled indirect restorations and aspects related to their manufacture. MATERIAL AND METHODS: The protocol of this review is available online (https://osf.io/x28ps/). Studies that used at least 2 different parameters (CAM units, number of axes, digital spacers, or protocols with different rotatory instruments, grit-sizes, milling speed, or others) for milling indirect restorations were included. A structured search up to July 2023 was performed by 2 independent reviewers for articles written in English in LILACS, MEDLINE via PubMed, EMBASE, Web of Science, and Scopus. RESULTS: Of 1546 studies identified, 22 were included in the review. Discrepancies were found between the planned and actual measured cement space, with a decreasing linear relationship impacting restoration adaptation at different points. The CEREC MC XL milling machine was the most used system in the included studies, with variations in bur types, milling modes, and number of burs uses affecting internal fit and surface trueness. The results demonstrated the better adaptation of restorations made with 5-axis over 3-axis milling machines. Lithium disilicate and zirconia were the most commonly used materials, and crowns and inlays were popular designs. Marginal and internal adaptation were the primary outcomes assessed using the various techniques. CONCLUSIONS: The study presented a comprehensive exploration of CAM systems and parameters, and their influence on indirect restorations. The planned cement space was not properly reproduced by the milling. Bur characteristics can affect restoration fit and trueness. The 5-axis units seem to result in better-adapted restorations compared with 3- and 4-axis units.

Reporting quality of scoping reviews in dental public health.

BACKGROUND: The study aimed to explore reporting characteristics of scoping reviews in dental public health and the impact of some factors on the reporting quality. METHODS: This study searched for dental public health scoping reviews in PubMed and Scopus without year restrictions and restricted to English-language publications. Study selection was undertaken by two reviewers independently. One reviewer, after training, extracted data from included studies considering general study characteristics and reporting characteristics. The impact of PRISMA-ScR publication, journal endorsement, and use of study protocol on the reporting was explored. RESULTS: Eighty-one scoping reviews were included. Five items presented rates of appropriate reporting higher than 80% considering the overall percentage. Related to the impact of PRISMA-ScR publication, six items were found more often in scoping reviews published after the publication of PRISMA-ScR than in scoping reviews published before the publication of PRISMA-ScR. With regards to journals endorsement, only two reporting characteristics were found more often in scoping reviews published in journals that endorse the PRISMA-ScR statement than in scoping reviews published in non-endorsers journals. Last, regarding the use of the pre-specified protocol, five reporting characteristics presented differences in studies reporting the use of pre-specified protocol than in studies that did not mention the use of a protocol. All differences were statistically significant. CONCLUSIONS: Important information is missing in the included scoping reviews demonstrating crucial reporting problems.

Endodontic therapy in patients with inherited bleeding disorders: a scoping review.

This systematic scoping review aimed to map available evidence regarding endodontic therapy in patients with inherited bleeding disorders (IBDs). Studies in medicine or dentistry were selected if they reported on endodontic therapy in individuals with IBDs such as hemophilia A, hemophilia B, or von Willebrand disease. Two independent researchers performed searches and screening in PubMed/MEDLINE, Embase, Scopus, Web of Science, and Cochrane Library. The search initially yielded 676 potentially relevant studies, 14 of which were included in the final analysis. Of these 14 studies, 3 were classified as consensus statements or guidelines, 3 as observational studies, 2 as reviews, 5 as case reports, and 1 as an editorial. Most of the evidence regarding prophylactic treatment (eg, blood transfusion, replacement therapy, or medication administration) prior to endodontic therapy was derived from observational studies. The most frequently reported procedure was endodontic therapy, while 1 case report described a surgical endodontic procedure. Most studies included in the analysis reported that these procedures could be performed under local anesthesia. Two case reports and 1 observational study described complications after endodontic therapy in patients with IBDs. This scoping review revealed a lack of well-designed studies related to the topic of endodontic therapy in patients with IBDs. The available evidence suggests that endodontic therapy in patients with IBDs can be considered a low-risk procedure; local anesthesia should be used in most cases when patients with IBDs are treated, but the use of prophylactic measures is preferred when nerve block anesthesia is required; endodontic therapy can be conducted in a clinical setting without the need for hospital admittance; and, although the number of reported complications is small, the risk should not be ignored.

Influence of connector cross-sectional geometry on the load-bearing capacity under fatigue of implant-supported zirconia fixed partial prosthesis.

STATEMENT OF PROBLEM: Zirconia has been reported to be suitable for multiunit monolithic restorations. However, as the connector region is the weakest part of the system, studies are needed to determine the optimal connector geometry. PURPOSE: The purpose of this in vitro study was to evaluate the load-bearing capacity under fatigue of implant-supported fixed partial prostheses made of monolithic zirconia with different connector cross-sectional geometries. MATERIAL AND METHODS: Three-unit monolithic fixed partial prostheses (from mandibular second premolar to the second molar) were fabricated in zirconia (Zenostar T) by computer-aided design and computer-aided manufacture (CAD-CAM). Different connector cross-sectional geometries, with an area of 9 mm2, were tested (n=10): round, square with rounded angles, or trapezoid with rounded angles. The prostheses were screwed over 2 implants and inserted into acrylic resin bases. The specimens were submitted to a mechanical fatigue test until failure, with load applied to the pontic using the stepwise stress methodology (initial load of 100 N for 5000 cycles, followed by an increase to 200 N for 20 000 cycles, with a subsequent increase of 50 N each step). For data analysis, fatigue failure load (FFL) and cycles for fatigue failure (CFF) were recorded. Failed structures were analyzed by fractography. The Kaplan-Meier test followed by a log-rank Mantel-Cox post hoc test was used to analyze FFL and CFF (α=.05). Weibull analysis was also performed. RESULTS: The round (1065 N) and trapezoid (1010 N) groups presented higher FFL values than the square one (870 N) (P≤.05). For CFF, the round connector (358 777) was better than the square (280 310) (P=.006), and the trapezoid (337 773) was statistically similar to both (P>.05). No difference among groups was observed in Weibull modulus either for CFF or FFL data. All failures were catastrophic, originating at the base of the connector and propagating toward the occlusal surface of the pontic (region under loading). CONCLUSIONS: The connector cross-sectional geometry significantly influenced the mechanical fatigue performance of implant-supported fixed partial prostheses made of monolithic zirconia.

Factors influencing the clinical performance of the restoration of endodontically treated teeth: An assessment of systematic reviews of clinical studies.

STATEMENT OF PROBLEM: How best to restore endodontically treated teeth is still unclear because many types of material and techniques are involved. PURPOSE: The purpose of this overview of systematic reviews of clinical studies was to assess the available evidence-based literature on the influence of associated clinical factors on the clinical performance (survival, failure rate, or success) of restored endodontically treated teeth. MATERIAL AND METHODS: PubMed, Scopus, and Web of Science were searched from inception until September 27, 2021, to identify systematic reviews. Two reviewers independently screened titles, abstracts, and full-text articles, and each reviewer extracted the data of half of the included studies. A single reviewer with an independent verifier completed the quality appraisal. A descriptive analysis of the collected data was made. RESULTS: A total of 36 systematic reviews fulfilled the inclusion criteria. The factors most assessed were the type of coronal restorative technique (n=22) and type of post (n=22). The results indicated that metal and fiber posts seem to present similar clinical performance, endocrowns could be a suitable restorative option, there is no evidence to confirm whether single crowns are better or worse than direct restoration, the maintenance of the coronal structure is a fundamental factor, and the ferrule effect is still a controversial topic. Most of the studies (n=30, 81%) presented a final Grading of Recommendations, Assessment, Development and Evaluations (GRADE) rating of "critically low." CONCLUSIONS: The post type does not appear to influence the clinical performance of restored endodontically treated teeth. However, conclusive evidence to suggest how different materials or techniques for restoring coronal tooth structure affect the clinical performance of such restorations, as well as the impact of the ferrule effect, is still lacking.

Restorative preferences and choices of dentists and students for restoring endodontically treated teeth: A systematic review of survey studies.

STATEMENT OF PROBLEM: The best protocol to restore endodontically treated teeth is still unclear, with many factors to be considered, including the selection and necessity of a post, the type of coronal restoration, the amount of remaining coronal structure, and the type of luting agent. PURPOSE: The purpose of this systematic review was to assess the restorative preferences for endodontically treated teeth between dentists and dental students. MATERIAL AND METHODS: Survey studies, written in English, of dentists and dental students, which evaluated the use of intracanal posts and other restorative options for endodontically treated teeth, were selected. Searches were performed in the PubMed and SCOPUS databases without time restriction. Screening and data extraction were performed by 2 researchers independently. A standardized outline was used to extract the data (questions related to the theme and the response rate of each question on the survey), and the risk of bias was assessed. Descriptive analysis was performed of the collected information. RESULTS: Twenty-five articles were included. Most dentists who answered the surveys reported the time since graduation as 1 to 20 years (40%), and 44% were specialists. The most reported choices concerning the type of posts used were prefabricated posts (45.8%), cast metal posts (16.7%), and both posts (16.7%). The cast metal posts were cited more frequently in surveys published between 1994 and 2010, whereas prefabricated posts, both metal and glass fiber ones, were cited between 2006 and 2019. The preferred luting agent for intracanal posts was resin-based (47%). These choices seem to have been influenced by time and by the level of postgraduate training. CONCLUSIONS: Restorative preferences related to posts have changed over time, from the use of cast posts to prefabricated ones or the use of both posts and seem to be influenced by experience and postgraduate training.

Protocol registration improves reporting quality of systematic reviews in dentistry.

BACKGROUND: The aims of this study were to assess whether the previous registration of a systematic review (SR) is associated with the improvement of the quality of the report of SRs and whether SR registration reduced outcome reporting bias. METHODS: We performed a search in PubMed for SRs in dentistry indexed in 2017. Data related to SR registration and reporting characteristics were extracted. We analyzed if the reporting of 21 characteristics of included SRs was associated with the prospective registration of protocols or reporting of a previously established protocol. The association between prospective registering of protocols, reporting of funding and number of included studies versus outcome reporting bias was tested via multivariable logistic regression. RESULTS: We included 495 SRs. One hundred and 62 (32.7%) SRs reported registering the SR protocol or working from a previously established protocol. Thirteen reporting characteristics were described statistically significant in SRs registered versus SRs that were not. Publication bias assessment and Report the number of participants showed the highest effects favoring the register (RR 1.59, CI 95% 1.19-2.12; RR 1.58, CI 95% 1.31-1.92 respectively). Moreover, Registration was not significantly linked with the articles' reporting statistical significance (OR 0.96, CI 95% 0.49-1.90). CONCLUSION: There is a positive influence of previously registering a protocol in the final report quality of SRs in dentistry. However, we did not observe an association between protocol registration and reduction in outcome reporting bias.

Knowledge synthesis: How to improve the use of evidence from clinical trials?

BACKGROUND: The value of systematic reviews (SRs) is determined by methodology and reporting quality of primary studies and how the SR is conducted and reported. AIM: This study discusses key aspects of clinical trials (CTs) that might affect the value of SRs. DESIGN: Narrative review. RESULTS: We highlighted the following CT factors that could affect SR value: Defining the purpose of CTs is important because it could directly impact whether an SR question is appropriately answered and formulated; choose the most appropriate intervention to answer a proposed SR question is critical because we can exclude or include different studies, directly influencing selection bias; when conducting SRs, the study's search must be restricted to equal or highly similar comparison groups, allowing suitable comparisons of the outcomes' estimates; in SRs, it may be interesting to explore the effect of the most common definition of the disease used in clinical practice, being useful in evidence-based dentistry and easily translated to daily practitioners; and deficiencies in CT reporting can lead to unusable reports, biased results, and conclusions. CONCLUSION: All aspects discussed were found to be important for improving the use of evidence from CTs.

Industry sponsorship bias in clinical trials in implant dentistry: Systematic review and meta-regression.

AIM: Industry sponsorship might distort the conduct and findings of studies in a large range of medical disciplines. The objective of this study was to assess whether industry sponsorship bias is present in randomized controlled trials (RCTs) on dental implants. MATERIAL AND METHODS: Two databases were searched (MEDLINE; Web of Science) to identify RCTs published between 1996 and 2016 assessing different implant systems, components or techniques, such as implant-abutment connections, geometries, surfaces, loading protocols or regions of placement. Studies' sponsorship status was classified as unclear, non-sponsored or sponsored. Our outcome was marginal bone loss per year (MBL/year) of follow-up. Random-effects meta-analysis of MBL/year with subgroup analysis according to sponsorship status was performed. Moreover, multivariable stepwise-selection meta-regression was performed to assess whether sponsorship status, among other covariates, was associated with MBL/year. RESULTS: One hundred and two RCTs (4,775 patients, 8,806 implants) were included. Overall mean (95% confidence interval) MBL/year was 0.74 mm (95% CI 0.67/0.82). There was no significant difference in MBL/year among sponsorship categories; unclear: 0.64 (95% CI 0.37/0.91); non-sponsored: 0.65 (095% CI 0.55/0.75); and sponsored: 0.82 (95% CI 0.71/0.94). CONCLUSION: Meta-regression did not demonstrate a significant association of MBL/year with sponsorship status or other covariates was found. We did not detect significant sponsorship bias in RCTs on dental implants.

Systematic reviews in restorative dentistry: discussing relevant aspects.

OBJECTIVE: This article aims to discuss key aspects of systematic reviews (SR) focusing on the improvement of the conduct and reporting. METHODS: Important aspects of SRs, such as prospective registration of the review protocol, basic structure, inclusion criteria, use of the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) Statement, confidence in the results and future directions are discussed. To determine relevant aspects, a search was conducted without date limitations in PubMed (October 15th, 2017) to identify SRs written in English evaluating clinical performance of direct composite resin restoration in permanent posterior teeth or comparing direct composite resin with other material/techniques. The quality of SRs included was assessed using the Assessing the Methodological Quality of Systematic Reviews 2 tool. RESULTS: Fifteen SRs were included. The overall confidence in the results of SRs was classified as critically low. Some aspects should be highlighted: SRs of in vitro studies are an important tool in restorative dentistry, and initiatives such as the PRISMA Statement and PROSPERO should be considered a standard code of practice. CONCLUSIONS: The compliance with and awareness of the discussed aspects may be a significant feature of the improvement of SR quality in the dentistry. CLINICAL SIGNIFICANCE: Initiatives such as the PRISMA Statement and PROSPERO should be taken in account by systematic reviewers in dentistry to improve the conduct and reporting of SRs, and to make their reviews are more clinically helpful.

Randomized Controlled Trials in Implant Dentistry: Assessment of the Last 20 Years of Contribution and Research Network Analysis.

The aim of this study was to evaluate the characteristics of randomized controlled trials (RCTs) regarding implant-supported single tooth or fixed partial dentures. We performed searches (PubMed/MEDLINE and Web of Science) to identify all RCTs published from 1996 to 2016 and assessed publication details, study characteristics, international collaboration networks, and characteristics related to the implant-supported treatment. Two reviewers independently screened the titles/abstracts and selected full texts. A total of 122 RCTs were included, and most of the authors were from Europe (72%). Most trials did not report a trial registering number (89.9%) or sample size calculation (58.2%). The use of the CONSORT Statement increased over the past 9 years. Trials were mostly conducted at universities (54.9%), and only 13.1% compared 2 or more implant brands. Loading protocol was the most prevalent main comparison among the included studies, and most of the RCTs did not clearly report whether they excluded patients with known risk factors. The studies reviewed here presented different methodological and publication characteristics, and many did not show aspects aligned with current research practices.

Influence of Different Implant Geometry in Clinical Longevity and Maintenance of Marginal Bone: A Systematic Review.

PURPOSE: To assess, through a systematic review, the influence of different implant geometries on clinical longevity and maintenance of marginal bone tissue. METHODS: An electronic search was conducted in MEDLINE, Scopus, and Web of Science databases, limited to studies written in English from 1996 to 2017 using specific search strategies. Only randomized controlled trials (RCTs) that compared dental implants and their geometries were included. Two reviewers independently selected studies, extracted data, and assessed the risk of bias of included studies. RESULTS: From the 4006 references identified by the search, 24 were considered eligible for full-text analysis, after which 10 studies were included in this review. A similar behavior of marginal bone loss between tapered and cylindrical geometries was observed; however, implants that had micro-threads in the neck presented a slight decrease of marginal bone loss compared to implants with straight or smooth neck. Success and survival rates were high, with cylindrical implants presenting higher success and survival rates than tapered ones. CONCLUSIONS: Implant geometry seems to have little influence on marginal bone loss (MBL) and survival and success rates after 1 year of implant placement; however, the evidence in this systematic review was classified as very low due to limitations such as study design, sample size, and publication bias. Thus, more well-designed RCTs should be conducted to provide evidence regarding the influence of implant geometry on MBL and survival and success rates after 1 year of implant placement.

Bonding to Sound and Caries-Affected Dentin: A Systematic Review and Meta-Analysis.

PURPOSE: This study systematically reviewed the literature to compare the bonding ability of dental adhesives applied to sound dentin (SoD) vs caries-affected dentin (CAD). MATERIALS AND METHODS: Three international databases (Medline/PubMed, Scopus, and Web of Science) were searched. Eligible studies which evaluated the bond strength to both SoD and CAD were included. Random effects meta-analyses were conducted to calculate pooled mean difference between substrates, separately for etch-and-rinse and self-etch adhesives. Subgroup analyses were carried out to explore heterogeneity considering the methods used for removal of infected carious dentin. A comparison between etch-and-rinse and self-etch adhesives restricted to CAD was also performed. Statistical heterogeneity was considered using the I2 test. The risk of bias of all included studies was assessed. RESULTS: In total, 2260 articles were found, 65 were selected for full-text reading, and 40 studies were included. The meta-analyses favored SoD over CAD for both etch-and-rinse (effect size: -10.04; 95% confidence interval [CI]: -11.94, -8.14; I2 = 95%) and self-etch adhesives (effect size: -6.76; 95% CI: -8.23, -5.30; I2 = 89%). In the subgroup analyses, SoD was favored irrespective of the method used for caries removal (effect size ≤ -4.86; I2 ≥ 28%): excavation (manual or with burs), grinding with abrasive papers, combination of more than one method, and when the method was not mentioned. The meta-analysis restricted to CAD favored etch-and-rinse over self-etch adhesives (effect size: 3.13; 95% CI: 1.82, 4.44; I2 = 72%). Most included studies were judged as having an unclear risk of bias. CONCLUSION: Bonding to SoD yields better results compared to CAD. Etch-and-rinse adhesives performed better than self-etch adhesives when applied to CAD.

Epidemiology and Reporting Characteristics of Systematic Reviews of Biomedical Research: A Cross-Sectional Study.

BACKGROUND: Systematic reviews (SRs) can help decision makers interpret the deluge of published biomedical literature. However, a SR may be of limited use if the methods used to conduct the SR are flawed, and reporting of the SR is incomplete. To our knowledge, since 2004 there has been no cross-sectional study of the prevalence, focus, and completeness of reporting of SRs across different specialties. Therefore, the aim of our study was to investigate the epidemiological and reporting characteristics of a more recent cross-section of SRs. METHODS AND FINDINGS: We searched MEDLINE to identify potentially eligible SRs indexed during the month of February 2014. Citations were screened using prespecified eligibility criteria. Epidemiological and reporting characteristics of a random sample of 300 SRs were extracted by one reviewer, with a 10% sample extracted in duplicate. We compared characteristics of Cochrane versus non-Cochrane reviews, and the 2014 sample of SRs versus a 2004 sample of SRs. We identified 682 SRs, suggesting that more than 8,000 SRs are being indexed in MEDLINE annually, corresponding to a 3-fold increase over the last decade. The majority of SRs addressed a therapeutic question and were conducted by authors based in China, the UK, or the US; they included a median of 15 studies involving 2,072 participants. Meta-analysis was performed in 63% of SRs, mostly using standard pairwise methods. Study risk of bias/quality assessment was performed in 70% of SRs but was rarely incorporated into the analysis (16%). Few SRs (7%) searched sources of unpublished data, and the risk of publication bias was considered in less than half of SRs. Reporting quality was highly variable; at least a third of SRs did not report use of a SR protocol, eligibility criteria relating to publication status, years of coverage of the search, a full Boolean search logic for at least one database, methods for data extraction, methods for study risk of bias assessment, a primary outcome, an abstract conclusion that incorporated study limitations, or the funding source of the SR. Cochrane SRs, which accounted for 15% of the sample, had more complete reporting than all other types of SRs. Reporting has generally improved since 2004, but remains suboptimal for many characteristics. CONCLUSIONS: An increasing number of SRs are being published, and many are poorly conducted and reported. Strategies are needed to help reduce this avoidable waste in research.

Endorsement of open science practices by dental journals: A meta-research study.

OBJECTIVES: This study evaluates the endorsement of open science practices by dental journals. MATERIALS AND METHODS: This was a meta-research study that included journals listed in the 2021 Journal Citation Reports under Dentistry. A comprehensive evaluation was performed by accessing journal websites to ascertain the availability of publicly accessible instructions to authors in Portuguese, English, or Spanish. A researcher extracted information from the "Instructions for Authors" section, encompassing the journal's impact factor, mention of any reporting guidelines, details on data sharing, acceptance of articles in preprint format, and information regarding study protocol registration. Descriptive data analysis was conducted using the Stata 14.0 program, and an Open Science Score (OSS) (ranging from 0 to 100 %) was calculated for each journal by considering five open science practices. Pearson's correlation test was conducted to determine the relationship between the OSS score and journal impact factor. RESULTS: Ninety journals were included in the study. Most journals (70 %) indicated the mandatory use of reporting guidelines, while 60 % recommended data sharing. Conversely, 46.7 % did not provide information on study protocol registration, and 44.4 % stipulated them as mandatory for authors. Regarding preprints, 50 % of the journals did not provide any information, but 46.7 % confirmed their acceptance. The mean OSS was 52.9 % (standard deviation 26.2). There was a weak correlation (Pearson's correlation coefficient of 0.221) between the journal impact factor and OSS (P-value=0.036). CONCLUSION: This study found varying degrees of endorsement of open science practices among dental journals. CLINICAL SIGNIFICANCE: Dental practitioners rely on high-quality, evidence-based research for informed decision-making. By assessing the endorsement of open science practices, our study contributes to improving the quality and reliability of dental research, ultimately enhancing the evidence base for clinical practice.

An alternative method for the fabrication of a root-supported overdenture: a clinical report.

The preservation of teeth to support an attachment-retained overdenture is an appropriate and stable alternative to extractions and complete dentures. A key to success is the strategic selection of teeth for retention. This clinical report discusses a method for fabricating an overdenture based on a combination of direct and indirect impression techniques. This technique is a simple and time-efficient alternative to traditional methods that aids in overcoming difficulties in fabricating overdentures.