Heterogeneous integration of single-crystalline complex-oxide membranes.

Complex-oxide materials exhibit a vast range of functional properties desirable for next-generation electronic, spintronic, magnetoelectric, neuromorphic, and energy conversion storage devices1-4. Their physical functionalities can be coupled by stacking layers of such materials to create heterostructures and can be further boosted by applying strain5-7. The predominant method for heterogeneous integration and application of strain has been through heteroepitaxy, which drastically limits the possible material combinations and the ability to integrate complex oxides with mature semiconductor technologies. Moreover, key physical properties of complex-oxide thin films, such as piezoelectricity and magnetostriction, are severely reduced by the substrate clamping effect. Here we demonstrate a universal mechanical exfoliation method of producing freestanding single-crystalline membranes made from a wide range of complex-oxide materials including perovskite, spinel and garnet crystal structures with varying crystallographic orientations. In addition, we create artificial heterostructures and hybridize their physical properties by directly stacking such freestanding membranes with different crystal structures and orientations, which is not possible using conventional methods. Our results establish a platform for stacking and coupling three-dimensional structures, akin to two-dimensional material-based heterostructures, for enhancing device functionalities8,9.

Monolithic 3D integration of 2D materials-based electronics towards ultimate edge computing solutions.

Three-dimensional (3D) hetero-integration technology is poised to revolutionize the field of electronics by stacking functional layers vertically, thereby creating novel 3D circuity architectures with high integration density and unparalleled multifunctionality. However, the conventional 3D integration technique involves complex wafer processing and intricate interlayer wiring. Here we demonstrate monolithic 3D integration of two-dimensional, material-based artificial intelligence (AI)-processing hardware with ultimate integrability and multifunctionality. A total of six layers of transistor and memristor arrays were vertically integrated into a 3D nanosystem to perform AI tasks, by peeling and stacking of AI processing layers made from bottom-up synthesized two-dimensional materials. This fully monolithic-3D-integrated AI system substantially reduces processing time, voltage drops, latency and footprint due to its densely packed AI processing layers with dense interlayer connectivity. The successful demonstration of this monolithic-3D-integrated AI system will not only provide a material-level solution for hetero-integration of electronics, but also pave the way for unprecedented multifunctional computing hardware with ultimate parallelism.

Vapor-Assisted Ex-Situ Doping of Carbon Nanotube toward Efficient and Stable Perovskite Solar Cells.

Single-walled carbon nanotubes (CNTs) has been considered as a promising material for a top electrode of perovskite solar cells owing to its hydrophobic nature, earth-abundance, and mechanical robustness. However, its poor conductivity, a shallow work function, and nonreflective nature have limited further enhancement in power conversion efficiency (PCE) of top CNT electrode-based perovskite solar cells. Here, we introduced a simple and scalable method to address these issues by utilizing an ex-situ vapor-assisted doping method. Trifluoromethanesulfonic acid (TFMS) vapor doping of the free-standing CNT sheet enabled tuning of conductivity and work function of the CNT electrode without damaging underneath layers. The sheet resistance of the CNT sheet was decreased by 21.3% with an increase in work function from 4.75 to 4.96 eV upon doping of TFMS. In addition, recently developed 2D perovskite-protected Cs-containing formamidium lead iodide (FACsPbI3) technology was employed to maximize the absorption. Because of the lowered resistance, better energy alignment, and improved absorption, the CNT electrode-based PSCs produced a PCE of 17.6% with a JSC of 24.21 mA/cm2, VOC of 1.005 V, and FF of 0.72. Furthermore, the resulting TFMS-doped CNT-PSCs demonstrated higher thermal and operational stability than bare CNT and metal electrode-based devices.

Controlled Redox of Lithium-Ion Endohedral Fullerene for Efficient and Stable Metal Electrode-Free Perovskite Solar Cells.

High efficiency perovskite solar cells have underpinned the rapid growth of the field. However, their low device stability limits further advancement. Hygroscopic lithium bis(trifluoromethanesulfonyl)imide (Li+TFSI-) and metal electrode are the main causes of the device instability. In this work, the redox reaction between lithium-ion endohedral fullerenes and 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobi-fluorene (spiro-MeOTAD) was controlled to optimize the amount of oxidized spiro-MeOTAD and antioxidizing neutral endohedral fullerenes. Application of this mixture to metal-free carbon nanotube (CNT)-laminated perovskite solar cells resulted in 17.2% efficiency with a stability time of more than 1100 h under severe conditions (temperature = 60 °C, humidity = 70%). Such high performance is attributed to the uninhibited charge flow, no metal-ion migration, and the enhanced antioxidizing activity of the devices.

Lithium-Ion Endohedral Fullerene (Li+ @C60 ) Dopants in Stable Perovskite Solar Cells Induce Instant Doping and Anti-Oxidation.

Herein, we report use of [Li+ @C60 ]TFSI- as a dopant for spiro-MeOTAD in lead halide perovskite solar cells. This approach gave an air stability nearly 10-fold that of conventional devices using Li+ TFSI- . Such high stability is attributed to the hydrophobic nature of [Li+ @C60 ]TFSI- repelling moisture and absorbing intruding oxygen, thereby protecting the perovskite device from degradation. Furthermore, [Li+ @C60 ]TFSI- could oxidize spiro-MeOTAD without the need for oxygen. The encapsulated devices exhibited outstanding air stability for more than 1000 h while illuminated under ambient conditions.

Graphene nanopattern as a universal epitaxy platform for single-crystal membrane production and defect reduction.

Heterogeneous integration of single-crystal materials offers great opportunities for advanced device platforms and functional systems1. Although substantial efforts have been made to co-integrate active device layers by heteroepitaxy, the mismatch in lattice polarity and lattice constants has been limiting the quality of the grown materials2. Layer transfer methods as an alternative approach, on the other hand, suffer from the limited availability of transferrable materials and transfer-process-related obstacles3. Here, we introduce graphene nanopatterns as an advanced heterointegration platform that allows the creation of a broad spectrum of freestanding single-crystalline membranes with substantially reduced defects, ranging from non-polar materials to polar materials and from low-bandgap to high-bandgap semiconductors. Additionally, we unveil unique mechanisms to substantially reduce crystallographic defects such as misfit dislocations, threading dislocations and antiphase boundaries in lattice- and polarity-mismatched heteroepitaxial systems, owing to the flexibility and chemical inertness of graphene nanopatterns. More importantly, we develop a comprehensive mechanics theory to precisely guide cracks through the graphene layer, and demonstrate the successful exfoliation of any epitaxial overlayers grown on the graphene nanopatterns. Thus, this approach has the potential to revolutionize the heterogeneous integration of dissimilar materials by widening the choice of materials and offering flexibility in designing heterointegrated systems.

Controlled Removal of Surfactants from Double-Walled Carbon Nanotubes for Stronger p-Doping Effect and Its Demonstration in Perovskite Solar Cells.

Double-walled carbon nanotubes (DWNTs) have shown potential as promising alternatives to conventional transparent electrodes owing to their solution processability as well as high conductivity and transparency. However, their DC to optical conductivity ratio is limited by the surrounding surfactants that prevent the p-doping of the DWNTs. To maximize the doping effectiveness, the surfactants are removed from the DWNTs, with negligible damage to the nanotubes, by calcination in an Ar atmosphere. The effective removal of the surfactants is characterized by various analyses, and the results show that the optimal calcination temperature is 400 °C. The conductivity of the DWNTs films improves when doped by triflic acid. While the conductivity increase of the surfactants-wrapped DWNT films is 31.9%, the conductivity increase of the surfactants-removed DWNT is found to be 59.7%. Using the surfactants-removed, p-doped, solution-processed transparent electrodes, inverted-type perovskite solar cells are fabricated, resulting in a power conversion efficiency of 17.7% without hysteresis. This work advances the application of DWNTs in transparent conductors, as the efficiency obtained is the highest value achieved to date for carbon nanotube electrode-based perovskite solar cells and solution-processable transparent electrode-based solar cells.

Photoluminescence from Single-Walled MoS2 Nanotubes Coaxially Grown on Boron Nitride Nanotubes.

Single-walled and multiwalled molybdenum disulfide (MoS2) nanotubes have been coaxially synthesized on small-diameter boron nitride nanotubes (BNNTs) that are obtained from removing single-walled carbon nanotubes (SWCNTs) in heteronanotubes of SWCNTs coated by BNNTs. The photoluminescence (PL) from single-walled MoS2 nanotubes supported by core BNNTs is observed in this work, which evidences the direct bandgap structure of single-walled MoS2 nanotubes with a diameter around 6-7 nm. The observation is consistent with our DFT results that the single-walled MoS2 nanotube changes from an indirect-gap to a direct-gap semiconductor when the diameter of a nanotube is more than around 5.2 nm. On the other hand, when there are SWCNTs inside the heteronanotubes of BNNTs and single-walled MoS2 nanotubes, the PL signal from MoS2 nanotubes is considerably quenched. The charge transfer and energy transfer between SWCNTs and single-walled MoS2 nanotubes were examined through characterizations by PL, X-ray photoelectron spectroscopy, and Raman spectroscopy. Moreover, the PL signal from multiwalled MoS2 nanotubes is significantly quenched. Single-walled and multiwalled MoS2 nanotubes exhibit different Raman features in both resonant and nonresonant Raman spectra.

Denatured M13 Bacteriophage-Templated Perovskite Solar Cells Exhibiting High Efficiency.

The M13 bacteriophage, a nature-inspired environmentally friendly biomaterial, is used as a perovskite crystal growth template and a grain boundary passivator in perovskite solar cells. The amino groups and carboxyl groups of amino acids on the M13 bacteriophage surface function as Lewis bases, interacting with the perovskite materials. The M13 bacteriophage-added perovskite films show a larger grain size and reduced trap-sites compared with the reference perovskite films. In addition, the existence of the M13 bacteriophage induces light scattering effect, which enhances the light absorption particularly in the long-wavelength region around 825 nm. Both the passivation effect of the M13 bacteriophage coordinating to the perovskite defect sites and the light scattering effect intensify when the M13 virus-added perovskite precursor solution is heated at 90 °C prior to the film formation. Heating the solution denatures the M13 bacteriophage by breaking their inter- and intra-molecular bondings. The denatured M13 bacteriophage-added perovskite solar cells exhibit an efficiency of 20.1% while the reference devices give an efficiency of 17.8%. The great improvement in efficiency comes from all of the three photovoltaic parameters, namely short-circuit current, open-circuit voltage, and fill factor, which correspond to the perovskite grain size, trap-site passivation, and charge transport, respectively.

Achieving High Efficiency in Solution-Processed Perovskite Solar Cells Using C60/C70 Mixed Fullerenes.

Fullerenes have attracted considerable interest as an electron-transporting layer in perovskite solar cells. Fullerene-based perovskite solar cells produce no hysteresis and do not require high-temperature annealing. However, high power conversion efficiency has been only achieved when the fullerene layer is thermally evaporated, which is an expensive process. In this work, the limitations of a solution-processed fullerene layer have been identified as high crystallinity and the presence of remnant solvents, in contrast to a thermally deposited C60 film, which has low crystallinity and no remaining solvents. As a solution to these problems, a mixed C60 and C70 solution-processed film, which exhibits low crystallinity, is proposed as an electron-transporting layer. The mixed-fullerene-based devices produce power conversion efficiencies as high as that of the thermally evaporated C60-based device (16.7%) owing to improved fill factor and open-circuit voltage. In addition, by vacuum-drying the mixed fullerene film, the power conversion efficiency of the solution-processed perovskite solar cells is further improved to 18.0%. This improvement originates from the enhanced transmittance and charge transport by removing the solvent effect. This simple and low-cost method can be easily used in any type of solar cells with fullerene as the electron-transporting layer.