Influence of surface treatment on the fluorescence of composite resins subjected to in situ bleaching.

OBJECTIVE: Use fluorescence analysis to evaluate the effect of polishing and surface sealant on the color of composite resin bleached with carbamide peroxide and subjected to staining. MATERIALS AND METHODS: Forty-eight composite resin specimens (Z250/Z350XT) were fabricated. After 24 hours stored in distilled water, all specimens were submitted to in situ bleaching with 16% home peroxide for 8 hours daily for a period of 14 days. Subsequently specimens were separated in three groups according to surface treatment proposed (group 1-polishing Sof-Lex; group 2-BisCover; group 3-control). After this, all the specimens were stained with red wine. A spectrofluorometer was used to evaluate the fluorescence in two readouts (L0-after surface treatment and L1-after staining).Data were analyzed by applying ANOVA using a statistical software program. RESULTS: No differences were shown for the factor treatment and other interactions. The lowest mean fluorescence value was found for Z350XT resin (1759.18 ± 0.13) when compared with Z250 (6863.92 ± 0.13). There was significant difference in the mean fluorescence values for all surface treatments between the two different readouts L0 (4820.93 ± 0.05) and L1 (3802.17 ± 0.05). CONCLUSION: The results suggested that all surface treatments proposed did not influenced the results of wine staining of bleached resins when compared with the control evaluated by the fluorescence method. CLINICAL SIGNIFICANCE: The purposes of this research was to find solutions, by means of surfaces treatment, to achieve restorations with a satisfactory and similar final aspect in relation to the teeth, and avoid discrepancies related to the esthetics and longevity of the restoration.

Stability of sunscreens containing CePO4: proposal for a new inorganic UV filter.

Inorganic UV filters have become attractive because of their role in protecting the skin from the damage caused by continuous exposure to the sun. However, their large refractive index and high photocatalytic activity have led to the development of alternative inorganic materials such as CePO4 for application as UV filters. This compound leaves a low amount of white residue on the skin and is highly stable. The aim of this study was to evaluate the physical and chemical stability of a cosmetic formulation containing ordinary organic UV filters combined with 5% CePO4, and, to compare it with other formulations containing the same vehicle with 5% TiO2 or ZnO as inorganic materials. The rheological behavior and chemical stability of the formulations containing these different UV filters were investigated. Results showed that the formulation containing CePO4 is a promising innovative UV filter due to its low interaction with organic filters, which culminates in longer shelf life when compared with traditional formulations containing ZnO or TiO2 filters. Moreover, the recognized ability of CePO4 to leave a low amount of white residue on the skin combined with great stability, suggests that CePO4 can be used as inorganic filter in high concentrations, affording formulations with high SPF values.

Chlorin photosensitizers sterically designed to prevent self-aggregation.

The synthesis and photophysical evaluation of new chlorin derivatives are described. The Diels-Alder reaction between protoporphyrin IX dimethyl ester and substituted maleimides furnishes endo-adducts that completely prevent the self-aggregation of the chlorins. Fluorescence, resonant light scattering (RLS) and (1)H NMR experiments, as well as X-ray crystallographic have demonstrated that the configurational arrangement of the synthesized chlorins prevent π-stacking interactions between macrocycles, thus indicating that it is a nonaggregating photosensitizer with high singlet oxygen (Φ(Δ)) and fluorescence (Φ(f)) quantum yields. Our results show that this type of synthetic strategy may provide the lead to a new generation of PDT photosensitizers.

Chitosan as a bioadhesive agent between porphyrins and phospholipids in a biomembrane model.

Porphyrins are currently used in photodynamic therapy as photosensitizers. In this paper we studied the interaction of two charged porphyrins, 5, 10, 15, 20-mesotetrakis(N-metyl-4-pyridyl) porphyrin, (TMPyP/chloride salt) cationic, and 5, 10, 15, 20-meso-tetrakis(sulfonatophenyl) porphyrin, (TPPS4/sodium salt) anionic, nanoassembled in phospholipid Langmuir monolayers and Langmuir-Blodgett films. Furthermore, we used chitosan to mediate the interaction between the porphyrins and the model membrane, aiming to understand the role of the polysaccharide in a molecular level. The effect of the interaction of the photosensitizers on the fluidity of the lipid monolayer was investigated by using dilatational surface elasticity. We also used photoluminescence (PL) spectroscopy to identify the porphyrins adsorbed in the phospholipid films. We observed an expansion of the monolayer promoted by the adsorption of the porphyrins into the lipid-air interface which was more pronounced in the case of TMPyP, as a consequence of a strong electrostatic interaction with the anionic monolayer. The chitosan promoted a higher adsorption of the porphyrins on the phospholipid monolayers and enabled the porphyrin to stay in its monomeric form (as confirmed by PL spectroscopy), thus demonstrating that chitosan can be pointed out as a potential photosensitizer delivery system in photodynamic therapy.

Investigation of the preparation and reactivity of metal-organic frameworks of cerium and pyridine-2,4,6-tricarboxylate.

The synthesis of three coordination polymers of cerium(III) and the ligand pyridine-2,4,6-tricarboxylate (PTC) is reported. Two of the materials crystallise under hydrothermal conditions at 180 °C, with [Ce(PTC)(H2O)2]·1.5H2O, (1), being formed on extended periods of reaction time, 3 days or longer, and Ce(PTC)(H2O)3, (2), crystallising after 1 day. Both phases contain Ce(III) but are prepared using the Ce(IV) salt Ce(SO4)2·4H2O as reagent. Under solvothermal conditions (mixed water-N,N-dimethylformamide (DMF)), the phase [Ce(PTC)(H2O)(DMF)]·H2O (3) is crystallised. The structures of the three materials are resolved by single crystal X-ray diffraction, with the phase purity of the samples determined by powder X-ray diffraction and thermogravimetric analysis. (1) is constructed from helical chains cross-linked by the PTC linkers to give a three-dimensional structure that contains clusters of water molecules in channels that are hydrogen-bonded to each other and to additional waters that are coordinated to cerium. (2) also contains nine-coordinate cerium but these are linked to give a dense framework, in which water is directly coordinated to cerium. (3) contains corner-shared nine-coordinate cerium centres, linked to give a framework in which Ce-coordinated DMF fills space. Upon heating the material (1) in air all water is irreversibly lost to give a poorly crystalline anhydrous phase Ce(PTC), as deduced from X-ray thermodiffractometry and thermogravimetric analysis. The material (1), however, is hydrothermally stable, and is also stable under oxidising conditions, where immersion in 30% H2O2 gives no loss in crystallinity. Oxidation of around 50% of surface Ce to the +4 oxidation state is thus possible, as evidenced by X-ray photoelectron spectroscopy, which is accompanied by a colour change from yellow to orange. Photocatalytic activity of (1) is screened and the material shows effective degradation of methyl orange.

Efficient phosphodiester hydrolysis by luminescent terbium(III) and europium(III) complexes.

The synthesis and structures of two new isostructural mononuclear [Ln(L)(NO(3))(H(2)O)(3)](NO(3))(2) complexes, with Ln = Tb (complex 1) and Eu (complex 2), which display high activity in the hydrolysis of the substrate 2,4-bis(dinitrophenyl)phosphate, are reported. These complexes displayed catalytic behavior similar to the mononuclear gadolinium complex [Gd(L)(NO(3))(H(2)O)(3)](NO(3))(2) previously reported by us (Inorg. Chem. 2008, 47, 2919-2921); one hydrolysis reaction in two stages where the diesterase and monoesterase activities could be monitored separately, with the first stage dependent on and the second independent of the complex concentration. Through potentiometric studies, electrospray ionization mass spectrometry (ESI-MS) analysis, and determination of the kinetic behaviors of 1 and 2 in acetonitrile/water solution, the species present in solution could be identified and suggested a dinuclear species, with one hydroxo group, as the most prominent catalyst under mild conditions. The complexes show high activity (k(1) = 7 and 18 s(-1) for 1 and 2, respectively) and catalytic efficiency. Complexes 1 and 2 were found to be active toward the cleavage of plasmid DNA, and complete kinetic studies were carried out. Studies with a radical scavenger (dimethylsulfoxide) confirmed the hydrolytic action of 1 and 2 in the cleavage of DNA. Studies on the incubation of distamycin with plasmid DNA suggested that 1 and 2 are regio-specific, interacting with the minor groove of DNA. These complexes displayed luminescent properties. Complex 1 showed higher emission intensity than 2 due to a more efficient energy transfer between triplet and emission levels of terbium (T --> (5)D(4)), along with nonradiative deactivation mechanisms of the excited states of europium via multiphonon decays and the ligand-to-metal charge transfer state. Lifetime measurements of the (5)D(4) and (5)D(0) excited levels for 1 and 2, respectively, indicated the numbers of coordinated water molecules for the complexes.

Experimental and Theoretical Studies of Glyphosate Detection in Water by an Europium Luminescent Complex and Effective Adsorption by HKUST-1 and IRMOF-3.

Designing an effective and simple detection method to quantify glyphosate (GLY) herbicide is desirable. Current chromatography-mass spectrometry and electrochemical methods can be used for this purpose, but these methods are difficult to be made portable and need high-cost equipment. Here, we evaluate a luminescent ß-diketonate-Eu-ethylenediaminetetraacetic acid complex for GLY quantification in aqueous media on the basis of the luminescent quenching process. This complex successfully measured GLY at concentrations ranging from 5 × 10-7 to 10-5 mol L-1. Theoretical methods (LUMPAC) are also performed to identify the complex most probable structure in solution. We also demonstrate that the metal-organic frameworks HKUST-1 and IRMOF-3, easily synthesized, effectively adsorb GLY in water in about 30 min of contact.

Synthesis of phthalocyanines-ALA conjugates: water-soluble compounds with low aggregation.

Syntheses of two water-soluble phthalocyanines (Pc) containing 5-aminolevulinic acid (ALA) linked to the core structure are described. These compounds were prepared by using original functionalizations, and they present remarkable structural and photophysical features, indicating that they could be applied to photodynamic therapy (PDT).

Hexagonal mesoporous silica modified with copper phthalocyanine as a photocatalyst for pesticide 2,4-dichlorophenoxiacetic acid degradation.

A new mesoporous catalyst was prepared by the reaction between 3-aminopropyltrimethoxisylane and Cu(II)-hexadecafluorophthalocyanine, followed by co-condensation of tetraethylorthosilicate around a micelle formed by n-dodecylamine. The surfactant was removed from the pores by continuous extraction with ethanol, giving the Si-CuF16Pc catalyst. This catalyst was characterized by SEM, FTIR, TGA, 29Si NMR, N2 adsorption and X-ray diffraction. SEM images confirmed that the catalyst material is formed by nanoaggregates with a diameter of 100 nm. N2 adsorption isotherms showed that Si-CuF16Pc has a surface area of approximately 200 m2 g(-1) and a porous diameter of 7.7 nm, characterizing the mesoporosity of this product. This novel material shows an excellent photocatalytic activity, degrading almost 90% of 2,4-dichlorophenoxyacetic acid (2,4-D) up to 30 min, while only approximately 40% of photodegradation was obtained in its absence.

Lanthanoid-Doped Phosphate/Vanadate Mixed Hollow Particles as Ratiometric Luminescent Sensors.

Rare earth (RE) phosphates and vanadates are structurally similar compositions that display distinct but complementary luminescent properties. The properties of these phosphors can be combined in REPO4-REVO4 heterostructures during the development of new sensing technologies for biological applications. This work presents the synthesis of hollow RE phosphate/vanadate colloidal particles and evaluates their applicability as luminescent markers. Hydrothermal treatments of RE hydroxycarbonate particles in the presence of the PO43- and VO43- precursors afforded the final REPO4-REVO4 solids in a two-step template synthesis. We converted precursor hydroxycarbonate particles into the final heterostructures and characterized their structure and morphology. According to our detailed study into the spectroscopic properties of Eu3+-doped particles and their luminescence response to several species, the presence of the phosphate and vanadate phases in a single particle provided different chemical environments and enabled the design of a ratiometric approach to detect H2O2. These results open new perspectives for the development of new intracellular luminescent markers.

Metalloporphyrins immobilized in Fe3O4@SiO2 mesoporous submicrospheres: Reusable biomimetic catalysts for hydrocarbon oxidation.

We successfully immobilized metalloporphyrins (MeP) in mesoporous silica coating magnetite spheres. In this sense, we prepared two different classes of core@shell supports, which comprise aligned (Fe3O4-AM-MeP, MeP=FeP or MnP) and non-aligned (Fe3O4-NM-MeP, MeP=FeP or MnP) mesoporous magnetic structures. X-ray diffractometry and energy dispersive X-ray spectroscopy confirmed the mesoporous nature of the silica shell of the materials. Magnetization measurements, scanning and transmission electron microscopies (SEM/TEM), electrophoretic mobility (ζ-potential), and infrared spectroscopy (FTIR) also confirm the composition and structure of the materials. The catalysts maintained their catalytic activity during nine reaction cycles toward hydrocarbon oxidation processes without detectable catalyst leaching. The catalysis results revealed a biomimetic pattern of cytochrome P450-type enzymes, thus confirming that the prepared materials are can effectively mimic the activity of such groups.

Improved green coffee oil antioxidant activity for cosmetical purpose by spray drying microencapsulation

AbstractThe oil extracted by cold pressing unroasted coffee beans, known as green coffee oil, has been widely used for cosmetic purposes. The objective of this work was to prepare and characterize microcapsules containing green coffee oil and to verify its antioxidant activity under the effect of light, heat and oxygen. The encapsulating material was arabic gum and the microcapsules were obtained by spray drying an oil-in-water emulsion containing green coffee oil. The characterization of the microcapsules was performed by laser diffraction, scanning electron microscopy, differential scanning calorimetry and the antioxidant activity. The antioxidant activity was determined by a modified active oxygen method with light irradiation, heating and oxygen flux. The microparticles were effectively produced by the proposed spray drying method, which resulted in green coffee oil loads of 10 and 30%. The morphological evaluation of microcapsules showed spherical shape with smooth and non-porous surfaces, demonstrating the adequacy of arabic gum as encapsulating material. Calorimetric analysis of individual components and microcapsules with 10 and 30% green coffee oil showed diminished degradation temperatures and enthalpy, suggesting a possible interaction between arabic gum and green coffee oil. The antioxidant activities for pure green coffee oil and its microcapsules with loads of 10 and 30% showed high activity when compared to the reference antioxidant alfa-tocopherol. Microcapsules containing 10 and 30% of oil showed 7-fold and 3-fold increase in antioxidant activity when compared to pure green coffee oil. The new method for antioxidant activity determination proposed here, which applies heat, light and oxygen simultaneously, suggests a high improvement in encapsulated green coffee oil when compared to this active alone. The results showed herein indicate a promising industrial application of this microencapsulated green coffee oil.

Tripolyphosphate as precursor for REPO(4):Eu (3+) (RE = Y, La, Gd) by a polymeric method.

A modification of the Pechini method was applied to obtain luminescent rare earth orthophosphates. The developed synthetic route is based on the ability of the tripolyphosphate anion (P(3)O(5-)(10)) to act both as a complexing agent and as an orthophosphate precursor. Heating of aqueous solutions containing RE(3+), Eu(3+), P(3)O(5-)(10), citric acid, and ethylene glycol led to polymeric resins. The ignition of these resins at different temperatures yielded luminescent orthophosphates. The produced nanosized phosphors (YPO(4):Eu(3+), (Y,Gd)PO(4):Eu(3+), and LaPO(4):Eu(3+)) were analyzed by infrared and luminescence spectroscopies, X-ray diffractometry, and scanning electron microscopy.

Photophysical properties of a photocytotoxic fluorinated chlorin conjugated to four beta-cyclodextrins.

A meso-tetrakis(pentafluorophenyl)-chlorin with the reduced pyrrole ring linked to an isoxazolidine ring (FC) has been conjugated to four beta-cyclodextrins (CDFC). The CDFC exhibits excellent water solubility and is a potent photosensitizer towards proliferating NCTC 2544 human keratinocytes. The study by conventional steady state absorption and fluorescence spectroscopies and by time-resolved femto- and nanosecond laser flash spectroscopies suggests that in ethanol and pH 7 buffer the beta-cyclodextrins embed the highly hydrophobic tetrakis(pentafluorophenyl)-chlorin macrocycle and strongly interact with the chlorin rings in the singlet and triplet manifolds. In these solvents, femtosecond spectroscopy suggests that the conjugate undergoes a rapid relaxation in the upper excited singlet states induced by photochemical and/or conformation change(s) at a rate of about 5 ps(-1) to fluorescent states whose lifetime is approximately 8 ns. This interaction is destroyed upon addition of Triton X100 to buffer. Both FC and CDFC strongly fluoresce (Phi(F) approximately 0.5) in micelles. Similar behavior is observed at the triplet level. In ethanol and water, the initial transient triplet state absorbance decays within 1-3 mus yielding a longer lived triplet with spectral properties indistinguishable from that of original difference absorbance spectra. The determination of the molar absorbance in the 440-460 nm region ( approximately 35 000 M(-1) cm(-1)) leads to an estimate of approximately 0.2 for the triplet formation quantum yield of FC in toluene and of FC and CDFC in Triton X100 micelles. Quenching of the CDFC triplets by dioxygen in buffer produces (1)O(2) in a good yield consistent with the effective photocytotoxicity of the chlorin-cyclodextrins conjugate towards cultured NCTC 2544 human keratinocytes. By contrast, FC which aggregates in buffer produces little if any (1)O(2).