RESUMEN
Recently, perovskite light-emitting diodes (PeLEDs) have exhibited outstanding performance in next-generation high-definition display applications. However, compared with green and red PeLEDs, the development of efficient and stable blue PeLEDs to meet the requirement for a wide color gamut has been a challenge. Herein, we vacuum thermally deposited a film of the lead-free rare earth halide Rb3CeI6, which shows deep blue emission with peaks at 427â nm and 468â nm. Due to the parity-allowed 5d-4f transition of Ce(III), the excited-state lifetime is as short as 22.3â ns (427â nm) and 25â ns (468â nm), respectively. The photoluminescence quantum yield (PLQY) is optimized to 51% by regulating the nucleation and growth of Rb3CeI6 grains. In a prototype rare earth light-emitting diode (ReLED) device, a thin insulating Al2O3 layer (5â nm) is inserted between the electron transport layer (ETL) and the emitting layer (EML, Rb3CeI6) to balance the carriers and reduce the dark current. The device shows a maximum luminance and EQE of 98 cd m-2 and 0.67%, respectively, and the electroluminescence (EL) spectrum maintains stability with changes in the operating voltage. In addition, the corresponding CIE coordinate is (0.15, 0.06), which closely matches the Rec. 2020 standard (0.131, 0.046).
RESUMEN
With the rapid progress of perovskite light-emitting diodes (PeLEDs), the large-scale fabrication of active matrix PeLED displays (AM-PeLEDs) is gaining increasing attention. However, the integration of high-resolution PeLED arrays with thin-film transistor backplanes remains a significant challenge for conventional spin-coating techniques. Here, the demonstration of large-area, blue-emitting AM-PeLEDs are demonstrated using a vacuum deposition technique, which is regarded as the most effective route for organic light-emitting diode displays. By the introduction of an in situ passivation strategy, the defects-related nonradiative recombination is largely suppressed, which leads to an improved photoluminescence quantum yield of vapor-deposited blue-emitting perovskites. The as-prepared blue PeLEDs exhibit a peak external quantum efficiency of 2.47% with pure-blue emission at 475 nm, which represents state-of-the-art performance for vapor-deposited pure-blue PeLEDs. Benefiting from the excellent uniformity and compatibility of thermal evaporation, the 6.67-inch blue-emitting AM-PeLED display with a high resolution of 394 pixels per inch is successfully demonstrated. The demonstration of blue-emitting AM-PeLED display represents a crucial step toward full-color perovskite display technology.
RESUMEN
Great research efforts are devoted to exploring the miniaturization of chip-scale coherent light sources possessing excellent lasing performance. Despite the indispensable role in Si photonics, SiO2 is generally considered not contributing to the starting up and operation of integrated lasers. Here, this work demonstrates an extraordinary-performance subwavelength-scale perovskite vertical cavity laser with all-transparent SiO2 cavity, whose cavity is ultra-simple and composed of only two parallel SiO2 plates. By introducing a ligand-assisted thermally co-evaporation strategy, highly luminescent perovskite film with high reproducibility and excellent optical gain is grown directly on SiO2 . Benefitting from their high-refractive-index contrast, low-threshold, high-quality factor, and single-mode lasing is achieved in subwavelength range of ≈120 nm, and verified by long-range coherence distance (115.6 µm) and high linear polarization degree (82%). More importantly, the subwavelength perovskite laser device could operate in water for 20 days without any observable degradation, exhibiting ultra-stable water-resistant performance. These findings would provide a simple but robust and reliable strategy for the miniaturized on-chip lasers compatible with Si photonics.
RESUMEN
Two-dimensional (2D) Ruddlesden-Popper perovskites have attracted great interest for their promising applications in high-performance optoelectronic devices owing to their greatly tunable band gaps, layered characteristics, and better environmental stability over three-dimensional (3D) perovskites. Here, we for the first time report on photodetectors based on few-layer MoS2 (n-type) and lead-free 2D perovskite (PEA)2SnI4 (p-type) heterostructures. The heterojunction device is capable of sensing light over the entire visible and near-infrared wavelength range with a tunable photoresponse peak. By using few-layer graphene flakes as the electrical contact, the performance of the heterostructures can be improved with a responsivity of 1100 A/W at 3 V bias, a fast response speed of â¼40 ms under zero bias, and an excellent rectification ratio of 500. Importantly, the quantum efficiency can achieve 38.2% at zero bias, which is comparable or even higher than that of 3D perovskite/2D material photodetectors. Importantly, the spectral response peak of heterojunctions gradually shifts in a wide spectral range from the band edge of MoS2 toward that of (PEA)2SnI4 with the external bias. We believe these 2D perovskite/2D material heterostructures with a great diversity represent an interesting system for investigating the fundamental optoelectronic properties and open up a new pathway toward 2D perovskite-based optoelectronic devices.