Single-shot ptychographic imaging of non-repetitive ultrafast events.

We demonstrate experimentally high-speed ptychographic imaging of non-repetitive complex-valued events. Three time-resolved complex-valued frames are reconstructed from data recorded in a single camera snapshot. The temporal resolution of the microscope is determined by delays between illuminating pulses. The ability to image amplitude and phase of nonrepetitive events with ultrafast temporal resolution will open new opportunities in science and technology.

Megawatt pulses from an all-fiber and self-starting femtosecond oscillator.

Mamyshev oscillators produce high-performance pulses, but technical and practical issues render them unsuitable for widespread use. Here we present a Mamyshev oscillator with several key design features that enable self-starting operation and unprecedented performance and simplicity from an all-fiber laser. The laser generates 110 nJ pulses that compress to 40 fs and 80 nJ with a grating pair. The pulse energy and duration are both the best achieved by a femtosecond all-fiber laser to date, to our knowledge, and the resulting peak power of 1.5 MW is 20 times higher than that of prior all-fiber, self-starting lasers. The simplicity of the design, ease of use, and pulse performance make this laser an attractive tool for practical applications.

Femtosecond optical parametric chirped-pulse amplification in birefringent step-index fiber.

We demonstrate an optical parametric chirped-pulse amplifier (OPCPA) that uses birefringence phase matching in a step-index single-mode optical fiber. The OPCPA is pumped with chirped pulses that can be compressed to sub-30-fs duration. The signal (idler) pulses are generated at 905 nm (1270 nm), have 26 nJ (20 nJ) pulse energy, and are compressible to 70 fs duration. The short compressed signal and idler pulse durations are enabled by the broad bandwidth of the pump pulses. Numerical simulations guiding the design are consistent with the experimental results and predict that scaling to higher pulse energies will be possible. Forgoing a photonic crystal fiber for phase-matching offers practical advantages, including allowing energy scaling with mode area.

Efficient soliton self-frequency shift in hydrogen-filled hollow-core fiber.

We report a study of soliton self-frequency shifting in a hydrogen-filled hollow-core fiber. The combination of hydrogen and short 40-fs input pulses underlies clean and efficient generation of Raman solitons between 1080 and 1600 nm. With 240-nJ input pulses, the Raman soliton energy ranges from 110 to 20 nJ over that wavelength range, and the pulse duration is approximately 45 fs. In particular, 70-nJ and 42-fs pulses are generated at 1300 nm. Numerical simulations agree reasonably well with experiments and predict that microjoule-energy tunable pulses should be possible with higher-energy input pulses.

Multimode Mamyshev oscillator.

We present a spatiotemporally mode-locked Mamyshev oscillator. A wide variety of multimode mode-locked states, with varying degrees of spatiotemporal coupling, are observed. We find that some control of the modal content of the output beam is possible through the cavity design. Comparison of simulations with experiments indicates that spatiotemporal mode locking (STML) is enabled by nonlinear intermodal interactions and spatial filtering, along with the Mamyshev mechanism. This work represents a first, to the best of our knowledge, exploration of STML in an oscillator with a Mamyshev saturable absorber.

Starting Dynamics of a Linear-Cavity Femtosecond Mamyshev Oscillator.

Mamyshev oscillators can generate high-power femtosecond pulses, but starting a mode-locked state has remained a major challenge due to the suppression of continuous-wave lasing. Here, we study the starting dynamics of a linear Mamyshev oscillator designed to generate high-power femtosecond pulses while avoiding component damage. Reliable starting to stable mode-locking is achieved with a combination of modulation of the pump power and shifting of a filter passband. The starting process is automated, with full electronic control. The laser delivers 21-nJ pulses that are dechirped to 65 fs in duration outside the cavity.

Deep learning reconstruction of ultrashort pulses from 2D spatial intensity patterns recorded by an all-in-line system in a single-shot.

We propose a simple all-in-line single-shot scheme for diagnostics of ultrashort laser pulses, consisting of a multi-mode fiber, a nonlinear crystal and a camera. The system records a 2D spatial intensity pattern, from which the pulse shape (amplitude and phase) are recovered, through a fast Deep Learning algorithm. We explore this scheme in simulations and demonstrate the recovery of ultrashort pulses, robustness to noise in measurements and to inaccuracies in the parameters of the system components. Our technique mitigates the need for commonly used iterative optimization reconstruction methods, which are usually slow and hampered by the presence of noise. These features make our concept system advantageous for real time probing of ultrafast processes and noisy conditions. Moreover, this work exemplifies that using deep learning we can unlock new types of systems for pulse recovery.

Generation of 1 µJ and 40 fs pulses from a large mode area gain-managed nonlinear amplifier.

We demonstrate numerically and experimentally a gain-managed nonlinear amplifier with a large mode area fiber. The amplifier delivers 1.2 µJ and sub-40 fs pulses with the spectrum spanning from ∼1000 to ∼1180nm. We show that longitudinal gain-loss evolution plays an essential role in pulse formation by comparing simulations with different gain models to the experimental results.

Femtosecond fiber Mamyshev oscillator at 1550 nm.

We investigated the possibility of reaching nanojoule-level pulse energies in a femtosecond erbium-doped fiber Mamyshev oscillator. In experiments, lasers generate stable pulse trains with energy up to 31.3 nJ, which is comparable to the highest achieved by prior ultrafast erbium fiber lasers. The pulse duration after a grating compressor is around 100 fs. However, as the pulse energy increases, the pulse quality degrades significantly, with a substantial fraction of the energy going into a picosecond pedestal. Numerical simulations agree with the experimental observations, and allow us to identify the gain spectrum and the nonlinearity of the erbium-doped fibers as challenges to the operation of such oscillators at high pulse energy.

Several new directions for ultrafast fiber lasers [Invited].

Ultrafast fiber lasers have the potential to make applications of ultrashort pulses widespread - techniques not only for scientists, but also for doctors, manufacturing engineers, and more. Today, this potential is only realized in refractive surgery and some femtosecond micromachining. The existing market for ultrafast lasers remains dominated by solid-state lasers, primarily Ti:sapphire, due to their superior performance. Recent advances show routes to ultrafast fiber sources that provide performance and capabilities equal to, and in some cases beyond, those of Ti:sapphire, in compact, versatile, low-cost devices. In this paper, we discuss the prospects for future ultrafast fiber lasers built on new kinds of pulse generation that capitalize on nonlinear dynamics. We focus primarily on three promising directions: mode-locked oscillators that use nonlinearity to enhance performance; systems that use nonlinear pulse propagation to achieve ultrashort pulses without a mode-locked oscillator; and multimode fiber lasers that exploit nonlinearities in space and time to obtain unparalleled control over an electric field.

Multiplexed single-shot ptychography.

We demonstrate experimentally multiplexed single-shot ptychography. Specifically, we present a polarization-resolved single-shot ptychographic microscope, where the orthogonally polarized amplitudes and phases of a polarization-sensitive object are reconstructed from ptychographic data recorded in a single camera exposure. Moreover, the amplitudes, phases, and polarization states of the probe beams are also recovered. That is, altogether we decipher eight images from single-shot ptychographic data. This work is an important step towards experimental demonstration of time-resolved imaging by multiplexed ptychography.

Self-seeded, multi-megawatt, Mamyshev oscillator.

We demonstrate a fiber oscillator that achieves 3 MW peak power, is easily started, and is environmentally stable. The Mamyshev oscillator delivers 190-nJ pulses that can be compressed externally to 35 fs duration. Accurate numerical modeling of the gain medium provides insight into the behavior and performance of the device.

Ptychographic ultrahigh-speed imaging.

We propose and demonstrate numerically a simple method for ultrahigh-speed imaging of complex (amplitude and phase) samples. Our method exploits redundancy in single-shot ptychography (SSP) for reconstruction of multiple frames from a single camera snapshot. We term the method Time-resolved Imaging by Multiplexed Ptychography (TIMP). We demonstrate TIMP numerically-reconstructing 15 frames of a complexed-valued dynamic object from a single noisy camera snapshot. Experimentally, we demonstrate SSP with single pulse illumination with pulse duration of 150 psec, where its spectral bandwidth can support 30 fsec pulses.

Generation of high-order harmonics with controllable elliptical polarization.

We propose and numerically demonstrate a method for obtaining high-harmonic radiation with desirable elliptical polarization. Atoms are shined by a combination of a strong linearly-polarized laser field and an additional weak field, which is elliptically polarized in a plane perpendicular to the polarization direction of the strong field. The strong driver ionizes and recollides electrons with their parent ion, while the weak field perturbatively drives the electrons away from "head-on" collision. Upon recombination, new elliptically polarized harmonics with same ellipticity as the weak driver are emitted at efficiency which linearly depends on the intensity of the weak beam, but is independent of its elilipticity.

Evaluation of a gain-managed nonlinear fiber amplifier for multiphoton microscopy.

Two-photon excited fluorescence microscopy is a widely-employed imaging technique that enables the noninvasive study of biological specimens in three dimensions with sub-micrometer resolution. Here, we report an assessment of a gain-managed nonlinear (GMN) fiber amplifier for multiphoton microscopy. This recently-developed source delivers 58-nJ and 33-fs pulses at 31-MHz repetition rate. We show that the GMN amplifier enables high-quality deep-tissue imaging, and furthermore that the broad spectral bandwidth of the GMN amplifier can be exploited for superior spectral resolution when imaging multiple distinct fluorophores.

Self-phase modulation spectral broadening in two-dimensional spatial solitons: toward three-dimensional spatiotemporal pulse-train solitons.

We demonstrate self-phase modulation (SPM) spectral broadening in two-dimensional solitons in homogeneous media using two different schemes. In the active mode, a train of pulses are collectively trapped and form a spatial soliton through a photorefractive, slowly responding, and electronically controlled self-focusing nonlinearity, and each pulse experiences spectral broadening by the fast SPM nonlinearity. In the passive mode, the pulse-train beam is guided in a waveguide that is optically induced by a continuous-wave thermal spatial soliton. The soliton formation increased the normalized spectral broadening factor from 0.5% up to 197%. This experiment presents significant progress toward the experimental demonstration of three-dimensional spatiotemporal pulse-train solitons.

Phase matching of high harmonic generation in the soft and hard X-ray regions of the spectrum.

We show how bright, tabletop, fully coherent hard X-ray beams can be generated through nonlinear upconversion of femtosecond laser light. By driving the high-order harmonic generation process using longer-wavelength midinfrared light, we show that, in theory, fully phase-matched frequency upconversion can extend into the hard X-ray region of the spectrum. We verify our scaling predictions experimentally by demonstrating phase matching in the soft X-ray region of the spectrum around 330 eV, using ultrafast driving laser pulses at 1.3-microm wavelength, in an extended, high-pressure, weakly ionized gas medium. We also show through calculations that scaling of the overall conversion efficiency is surprisingly favorable as the wavelength of the driving laser is increased, making tabletop, fully coherent, multi-keV X-ray sources feasible. The rapidly decreasing microscopic single-atom yield, predicted for harmonics driven by longer-wavelength lasers, is compensated macroscopically by an increased optimal pressure for phase matching and a rapidly decreasing reabsorption of the generated X-rays.

Synchronously pumped Raman laser for simultaneous degenerate and nondegenerate two-photon microscopy.

Two-photon fluorescence microscopy is a nonlinear imaging modality frequently used in deep-tissue imaging applications. A tunable-wavelength multicolor short-pulse source is usually required to excite fluorophores with a wide range of excitation wavelengths. This need is most typically met by solid-state lasers, which are bulky, expensive, and complicated systems. Here, we demonstrate a compact, robust fiber system that generates naturally synchronized femtosecond pulses at 1050 nm and 1200 nm by using a combination of gain-managed and Raman amplification. We image the brain of a mouse and view the blood vessels, neurons, and other cell-like structures using simultaneous degenerate and nondegenerate excitation.

Integrated sample-handling and mounting system for fixed-target serial synchrotron crystallography.

Serial synchrotron crystallography (SSX) is enabling the efficient use of small crystals for structure-function studies of biomolecules and for drug discovery. An integrated SSX system has been developed comprising ultralow background-scatter sample holders suitable for room and cryogenic temperature crystallographic data collection, a sample-loading station and a humid `gloveless' glovebox. The sample holders incorporate thin-film supports with a variety of designs optimized for different crystal-loading challenges. These holders facilitate the dispersion of crystals and the removal of excess liquid, can be cooled at extremely high rates, generate little background scatter, allow data collection over >90° of oscillation without obstruction or the risk of generating saturating Bragg peaks, are compatible with existing infrastructure for high-throughput cryocrystallography and are reusable. The sample-loading station allows sample preparation and loading onto the support film, the application of time-varying suction for optimal removal of excess liquid, crystal repositioning and cryoprotection, and the application of sealing films for room-temperature data collection, all in a controlled-humidity environment. The humid glovebox allows microscope observation of the sample-loading station and crystallization trays while maintaining near-saturating humidities that further minimize the risks of sample dehydration and damage, and maximize working times. This integrated system addresses common problems in obtaining properly dispersed, properly hydrated and isomorphous microcrystals for fixed-orientation and oscillation data collection. Its ease of use, flexibility and optimized performance make it attractive not just for SSX but also for single-crystal and few-crystal data collection. Fundamental concepts that are important in achieving desired crystal distributions on a sample holder via time-varying suction-induced liquid flows are also discussed.

Sawtooth grating-assisted phase-matching.

We show that a sawtooth phase-modulation is the optimal profile for grating assisted phase matching (GAPM). Perfect (sharp) sawtooth modulation fully corrects the phase-mismatch, exhibiting conversion equal to conventional phase matching, while smoothened, approximate sawtooth structures are more efficient than sinusoidal or square GAPM modulations that were previously studied. As an example, we demonstrate numerically optically-induced sawtooth GAPM for high harmonic generation. Sawtooth GAPM is the most efficient method for increasing the conversion efficiency of high harmonic generation through quasi-phase-matching, with an ultimate efficiency that closely matches the ideal phase-matching case.