Dimensionally and environmentally ultra-stable polymer composites reinforced with carbon fibres.

The quest to develop materials that enable the manufacture of dimensionally ultra-stable structures for critical-dimension components in spacecraft has led to much research over many decades and the evolution of carbon fibre reinforced polymer materials. This has resulted in structural designs that feature a near-zero coefficient of thermal expansion. However, the dimensional instabilities that result from moisture ingression and release remain the fundamental vulnerability of the matrix, which restricts many applications. Here, we address this challenge by developing a space-qualifiable physical surface barrier that blends within the mechanical properties of the composite, thus becoming part of the composite itself. The resulting enhanced composite features mechanical integrity and a strength that is superior to the underlying composite, while remaining impervious to moisture and outgassing. We demonstrate production capability for a model-sized component for the Sentinel-5 mission and demonstrate such capability for future European Space Agency (ESA) and National Aeronautics and Space Administration (NASA) programmes such as Copernicus Extension, Earth Explorer and Science Cosmic Visions.

Publisher Correction: Dimensionally and environmentally ultra-stable polymer composites reinforced with carbon fibres.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Publisher Correction: Dimensionally and environmentally ultra-stable polymer composites reinforced with carbon fibres.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Tropism of engineered and evolved recombinant AAV serotypes in the rd1 mouse and ex vivo primate retina.

There is much debate on the adeno-associated virus (AAV) serotype that best targets specific retinal cell types and the route of surgical delivery-intravitreal or subretinal. This study compared three of the most efficacious AAV vectors known to date in a mouse model of retinal degeneration (rd1 mouse) and macaque and human retinal explants. Green fluorescent protein (GFP) driven by a ubiquitous promoter was packaged into three AAV capsids: AAV2/8(Y733F), AAV2/2(quad Y-F) and AAV2/2(7m8). Overall, AAV2/2(7m8) transduced the largest area of retina and resulted in the highest level of GFP expression, followed by AAV2/2(quad Y-F) and AAV2/8(Y733F). AAV2/2(7m8) and AAV2/2(quad Y-F) both resulted in similar patterns of transduction whether they were injected intravitreally or subretinally. AAV2/8(Y733F) transduced a significantly smaller area of retina when injected intravitreally compared with subretinally. Retinal ganglion cells, horizontal cells and retinal pigment epithelium expressed relatively high levels of GFP in the mouse retina, whereas amacrine cells expressed low levels of GFP and bipolar cells were infrequently transduced. Cone cells were the most frequently transduced cell type in macaque retina explants, whereas Müller cells were the predominant transduced cell type in human retinal explants. Of the AAV serotypes tested, AAV2/2(7m8) was the most effective at transducing a range of cell types in degenerate mouse retina and macaque and human retinal explants.

Clinicians' prescribing practices for bariatric surgery patients: is there an issue?

WHAT IS KNOWN AND OBJECTIVES: Patients undergoing Roux-en-Y gastric bariatric (RYGB) surgery present a reduced absorption site, and special attention should therefore be taken when prescribing oral-dosage forms. This study was carried out to investigate the extent to which non-bariatric clinicians are aware of this issue when prescribing medicines for this population, and what type of information is available to aid them in their decision-making. METHODS: Two questionnaires were created, one for non-bariatric clinicians and another for their patients who had undergone RYGB surgery, to gather information about the prescription practices for this population. Additionally, a literature search of pharmacokinetic studies on bariatric patients and recommended prescription practices was carried out. RESULTS AND DISCUSSION: Of the 62 non-bariatric clinicians surveyed, 50% believed RYGB surgery interferes with drug absorption; however, 68% still prescribed tablets as the first choice form of dosage. Young clinicians (35%) were less likely to believe that RYGB surgery could affect drug absorption than experienced clinicians (43%). The main reasons for changing dosage forms were patient complaints about efficacy or difficulty in swallowing tablets. Of the 73 patients, 43 were taking drugs in tablet form after the surgery, 24 of whom had health issues unrelated to the surgery. None of the journals read by the clinicians contained pharmacokinetics (PK) studies involving bariatric surgery patients or presented recommendations for the prescription of oral-dosage forms for this population. The literature search revealed a total of 22 drugs that had undergone PK studies in RYGB patients. Fifteen of them were reported to have decreased effects, 12 of which were administered as tablets. WHAT IS NEW AND CONCLUSION: There is still a relative lack of clinical evidence to guide clinicians when prescribing medicines for bariatric patients. It is therefore recommended that pharmacists should have greater participation in the prescription process to advise non-bariatric clinicians and educate RYGB surgery patients to help avoid therapeutic failure.

Reproductive Patterns in the Non-Breeding Season in Asinina de Miranda Jennies.

This study aims to characterize the reproductive patterns in Asinina de Miranda jennies during the non-breeding season. Reproductive activity was surveyed in 12 females, aged between 3 and 18 years old, using ultrasound and teasing with a jack. The animals were monitored from September to April, six in each consecutive year. Of these 12 females, nine showed disruption to the normal pattern of ovarian activity during the non-breeding season. Loss of normal cyclicity included anoestrus (41.7%), silent ovulatory oestrus (25%), and persistence of corpus luteum (8.3%). Only three females maintained a regular cyclic pattern with oestrous behaviour during the non-breeding season. Anoestrus began in early November and lasted for an average of 147 ± 28 days (113-191 days), ending near to the spring equinox. Onset of silent oestrous cycles began more erratically, between October and February. In both groups the first behavioural ovulation of the year occurred around the time of the spring equinox. Disrupted reproductive activity was preceded by a shorter oestrous cycle only in females entering anoestrus. The mean follicle size in the first ovulation of the year was larger than in the reproductive season (44.7 ± 2.45 mm vs 39.2 ± 3.60 mm) in anoestrous jennies with protracted oestrus. Though age and body condition score (BCS) were associated, changes in BCS below a threshold of four points (for anoestrus) and five points (for silent oestrus) contributed greatly to disruption of reproductive cycles. BCS in females with regular oestrous cycles during the winter season remained unchanged or exceeded five points prior to the winter solstice.

Solution processable multi-channel ZnO nanowire field-effect transistors with organic gate dielectric.

The present work focuses on nanowire (NW) applications as semiconducting elements in solution processable field-effect transistors (FETs) targeting large-area low-cost electronics. We address one of the main challenges related to NW deposition and alignment by using dielectrophoresis (DEP) to select multiple ZnO nanowires with the correct length, and to attract, orientate and position them in predefined substrate locations. High-performance top-gate ZnO NW FETs are demonstrated on glass substrates with organic gate dielectric layers and surround source-drain contacts. Such devices are hybrids, in which inorganic multiple single-crystal ZnO NWs and organic gate dielectric are synergic in a single system. Current-voltage (I-V) measurements of a representative hybrid device demonstrate excellent device performance with high on/off ratio of ~10(7), steep subthreshold swing (s-s) of ~400 mV/dec and high electron mobility of ~35 cm(2) V(-1) s(-1) in N2 ambient. Stable device operation is demonstrated after 3 months of air exposure, where similar device parameters are extracted including on/off ratio of ~4 × 10(6), s-s ~500 mV/dec and field-effect mobility of ~28 cm(2) V(-1) s(-1). These results demonstrate that DEP can be used to assemble multiples of NWs from solvent formulations to enable low-temperature hybrid transistor fabrication for large-area inexpensive electronics.

Biotechnology advances: a perspective on the diagnosis and research of Rabies Virus.

Rabies is a widespread zoonotic disease responsible for approximately 55,000 human deaths/year. The direct fluorescent antibody test (DFAT) and the mouse inoculation test (MIT) used for rabies diagnosis, have high sensitivity and specificity, but are expensive and time-consuming. These disadvantages and the identification of new strains of the virus encourage the use of new techniques that are rapid, sensitive, specific and economical for the detection and research of the Rabies Virus (RABV). Real-time RT-PCR, phylogeographic analysis, proteomic assays and DNA recombinant technology have been used in research laboratories. Together, these techniques are effective on samples with low virus titers in the study of molecular epidemiology or in the identification of new disease markers, thus improving the performance of biological assays. In this context, modern advances in molecular technology are now beginning to complement more traditional approaches and promise to revolutionize the diagnosis of rabies. This brief review presents some of the recent molecular tools used for RABV analysis, with emphasis on rabies diagnosis and research.

Design of double-walled carbon nanotubes for biomedical applications.

Double-walled carbon nanotubes (DWNTs) prepared by catalytic chemical vapour deposition were functionalized in such a way that they were optimally designed as a nano-vector for the delivery of small interfering RNA (siRNA), which is of great interest for biomedical research and drug development. DWNTs were initially oxidized and coated with a polypeptide (Poly(Lys:Phe)), which was then conjugated to thiol-modified siRNA using a heterobifunctional cross-linker. The obtained oxDWNT-siRNA was characterized by Raman spectroscopy inside and outside a biological environment (mammalian cells). Uptake of the custom-designed nanotubes was not associated with detectable biochemical perturbations in cultured cells, but transfection of cells with DWNTs loaded with siRNA targeting the green fluorescent protein (GFP) gene, serving as a model system, as well as with therapeutic siRNA targeting the survivin gene, led to a significant gene silencing effect, and in the latter case a resulting apoptotic effect in cancer cells.

The effect of pH on the functionalization of nylon fabric with carbon nanotubes.

Single walled carbon nanotubes (SWCNTs) were dispersed in water and attached to nylon fabrics by a dip-drying procedure; scanning electron microscopy and Raman spectroscopy suggest the attachment of the SWCNTs. The electrical resistance of the functionalized fabrics is found to be pH-dependent, which is correlated with the quantity of SWCNTs dispersed in water at different values of pH. This can be further ascribed to the influence of the pK(a) of the acid (e.g., acetic acid in this study) used to tune pH. The acid may affect the dispersion of SWCNTs through two different mechanisms: (1) the free protons may protonate the amine and/or sulfonate group in the dye molecules, resulting in a variety of interactions among the dye molecules, SWCNTs and water molecules and (2) the resulting ions may increase the ionic strength of the solution, compressing the electric double layers of SWCNT colloids and thus impairing their stability. The former possibility is ruled out by data obtained using X-ray photoelectron spectroscopy, Raman spectroscopy, and ultraviolet-visible-near infrared spectroscopy; thus the latter is proposed to account for the experimental results. The colour strength of the functionalized fabrics increases with increasing pH, which is in agreement with their measured electrical properties.

Push-out strength of root fillings with or without thermomechanical compaction.

AIM: To evaluate the influence of thermomechanical compaction (Tagger's hybrid technique - THT) on the push-out strength of several root filling materials to root dentine. METHODOLOGY: Root canals of eighty roots in human canines were prepared with the ProTaper system and filled with one of the following materials, using either lateral compaction (LC) (n = 40) or THT (n = 40): AH Plus/gutta-percha (GP) (n = 10), Sealer 26/GP (n = 10), Epiphany SE/Resilon (n = 10) and Epiphany SE/GP (n = 10). Three 2-mm-thick dentine slices were obtained from each third of each root. The root filling in the first slice was subjected to a push-out test to evaluate the bond strength of the materials to intraradicular dentine. Data (in MPa) were analysed using anova and post hoc Tukey's test (P < 0.05). Failure mode was determined at × 25 magnification. The other two slices were prepared for scanning electron microscopy (SEM) to examine the surface of the filling materials. RESULTS: Lateral compaction (1.34 ± 1.14 MPa) was associated with a significantly higher bond strength (P < 0.05) than the THT (0.97 ± 0.88 MPa). AH Plus/GP (2.23 ± 0.83 MPa) and Sealer 26/GP (1.86 ± 0.50 MPa) had significantly higher bond strengths than the other materials and differed significantly from each other (P < 0.05). There was a significant difference (P < 0.05) between the coronal (1.36 ± 1.15 MPa), middle (1.14 ± 1.05 MPa) and apical thirds (0.95 ± 0.83 MPa). Considering the technique and root filling material interaction, AH Plus/GP-LC was associated with the highest mean values (2.65 ± 0.66 MPa) (P < 0.05). Sealer 26/GP-LC (2.10 ± 0.46 MPa), AH Plus/GP-THT (1.81 ± 0.78 MPa) and Sealer 26/GP-TH (1.63 ± 0.44 MPa) had intermediate values that were not significantly different from each other (P > 0.05). Epiphany SE was associated with the lowest mean values (3.70 ± 0.86 MPa) (P < 0.05), regardless of the root filling technique and type of solid material (cone). Adhesive failures predominated in the specimens filled with Epiphany SE, whilst mixed and cohesive failures were more frequent in those filled with AH Plus and Sealer 26, regardless of the root filling technique. SEM analysis revealed that LC produced a dense and well-compacted filling whilst the use of a hybrid thermomechanical technique resulted in the solid material (GP or Resilon) intermingled within sealer to form a nonhomogenous mass. CONCLUSION: Lateral compaction was associated with higher bond strengths of the materials to intraradicular dentine than a hybrid technique using thermomechanical compaction. The greatest push-out strengths were obtained when the canals were filled with LC of AH Plus and GP cones.

Porphyrin-Nanocarbon Complexes to Control the Photodegradation of Rhodamine.

Porphyrin-nanocarbon systems were used to generate a photocatalyst for the control of rhodamine B and rhodamine 6G photodegradation. Carboxylic functionalized multi-walled carbon nanotubes (o-MWCNTs) were decorated by two different porphyrin moieties: 5-(4-aminophenyl)-10,15,20-(triphenyl)porphyrin (a-TPP) with an amine linker and 5-(4-carboxyphenyl)-10,15,20-(triphenyl)porphyrin (c-TPP) with a carboxyl linker to the o-MWCNT, respectively, with their photocatalyst performances investigated. The optical properties of the mixed nanocomposite materials were investigated to reveal the intrinsic energy levels and mechanisms of degradation. The charge-transfer states of the o-MWCNTs were directly correlated with the performance of the complexes as well as the affinity of the porphyrin moiety to the o-MWCNT anchor, thus extending our understanding of energy-transfer kinetics in porphyrin-CNT systems. Both a-TPP and c-TPP o-MWCNT complexes offered improved photocatalytic performance for both RhB and Rh6G compared to the reference o-MWCNTs and both porphyrins in isolated form. The photocatalytic performance improved with higher concentration of o-MWCNTs in the complexed sample, indicating the presence of greater numbers of -H/-OH groups necessary to more efficient photodegradation. The large presence of the -H/-OH group in the complexes was expected and was related to the functionalization of the o-MWCNTs needed for high porphyrin attachment. However, the photocatalytic efficiency was affected at higher o-MWCNT concentrations due to the decomposition of the porphyrins and changes to the size of the CNT agglomerates, thus reducing the surface area of the reactant. These findings demonstrate a system that displays solar-based degradation of rhodamine moieties that are on par, or an improvement to, state-of-the-art organic systems.

Dispersive hole transport in polymer:carbon nanotube composites.

The hole transport properties of poly(2-methoxy, 5-(2'-ethyl-hexoxy)-p-phenylene vinylene) (MEH-PPV) blended with acid oxidized multiwall carbon nanotubes (COOH-MWCNTs) were investigated in a diode configuration using the time-of-flight (TOF) photocurrent method. While the room temperature hole mobility in pure MEH-PPV films was non-dispersive with positive field dependent mobility, MEH-PPV:COOH-MWCNT blended devices exhibited dispersive transport and negative field dependent mobility. This indicates that the hole mobility in this composite is influenced by positional disorder caused by the presence of COOH-MWCNTs in the MEH-PPV matrix. These results strongly suggest that the distribution of COOH-MWCNTs optimising in the organic matrix is important for charge transport in the high mobility nanotube component to be activated, when used in hybrid material systems.

Quantitative 3D profilometry and SEM analysis of the adaptation of root-end filling materials placed under an optical microscope.

AIM: To evaluate by 3D profilometry and scanning electron microscopy (SEM), the marginal adaptation of mineral trioxide aggregate (MTA) and Sealer 26 placed in root-end cavities with direct vision or under an optical microscope. METHODOLOGY: The root ends of 52 root filled canine teeth were filled with MTA or Sealer 26 under direct vision or optical microscope (n=13). In each group, eight specimens were analysed by profilometry for measurement of the area and depth of gaps. In the other five specimens, gap area was measured using SEM to verify marginal adaptation and surface characteristic. Data were analysed by parametric (anova and Tukey) and non-parametric (Kruskal-Wallis and Dunn) tests. RESULTS: The assessment of the adaptation of both materials to dentine was not influenced by the mode of visualization, which was confirmed by both profilometry and SEM observations. The voids measured with profilometry for Sealer 26 under direct vision were significantly wider and deeper than those for MTA under direct vision (P<0.05). In SEM, significantly larger gap areas were observed with Sealer 26 (P<0.05). CONCLUSION: Root-end cavities filled with MTA had smaller gaps and better marginal adaptation than Sealer 26.

Correlation between oral health perception and clinical factors in a Brazilian community.

OBJECTIVE: The aim of this study was to analyse associations between self-perception of oral health and relevant clinical, personal and socio-demographic factors in a Brazilian community. MATERIAL AND METHODS: Urban adults living in a city in southern Brazil were interviewerd and examined. Individuals with acute pain and who needed multiple extractions of teeth were excluded. Self-perception and the Oral Health Impact Profile (OHIP-14) were applied to measure the impact of oral conditions on the quality of life. Socio-demographic and clinical indicators were also analysed. RESULTS: The clinical examination revealed a high dental caries experience (DMFT = 18.9) and a high prevalence of periodontal disease. Oral condition was considered "normal" by 42% of respondents. The variables associated with the OHIP-14 were: education, age, self-assessment, dental caries and the DMFT index. CONCLUSIONS: Self-perception of oral health was associated with OHIP-14 and the clinical indicators had low influence in the self-perception. Therefore, the development of educational initiatives and preventive strategies for the adult population is recommended.

Environmental characteristics, nutritional and executive functions in children of 6 to 7 years.

This study aimed to analyze the socio-environmental characteristics, executive and nutritional functions in children aged 6 to 7 years, from public schools in Alagoas, Brazil. A quantitative, cross-sectional and descriptive study was performed involving 64 children of the mentioned age group, from public schools located in Alagoas: Maceió, on the coast; Major Isidoro, in the hinterland and Palmeira dos Índios, in the country. Such analyzes were made through the application of neuropsychological tests and anthropometric assessment with children and food and socio-environmental surveys with their parents. As for the type of housing, 100% were made of masonry, with a bathroom present in 98.4%. All children reported with the habit of bathing in the river / lagoon, presented some pathology. There was no significant difference between cities in terms of the sociodemographic characteristics evaluated, with the same result occurring with the factors associated with the occurrence of diseases in children. The subtests of WISC-IV, were below the average in all municipalities, and the TAC and SCC were classified within the average. However, even though the ranking were divided between below average and average, it is possible to identify from the subtests of WISC-IV, that the general IQ showed a cognitive level below the average. There was also no significant difference in the anthropometric assessment (weight, height, BMI and IMCI) between the evaluated students. The average weight was 23.3 kg to 25 kg, the height between 1.23 m to 1.24 m, the BMI between 16.4 to 17; the IMCI from 2.8 to 3.0. Children were classified within the average. Regarding micronutrients (Ca, Fe, K, Mg and Na, and vitamins A, C, D, B1, B9 and B12) and calories, there was also no significant difference between the cities evaluated. The same occurred with macronutrients (proteins, carbohydrates and lipids). This study showed that in general there was no difference between the students of the three municipalities. Probably, even though they are all public schools and from different cities, children have similar social conditions.

The growth of silica and silica-clad nanowires using a solid-state reaction mechanism on Ti, Ni and SiO(2) layers.

A large area compatible and solid-state process for growing silica nanowires is reported using nickel, titanium and silicon dioxide layers on silicon. The silica nanowires also contain silicon, as indicated by Raman spectroscopy. The phonon confinement model is employed to measure the diameter of the Si rich tail for our samples. The measured Raman peak shift and full width at half-maximum variation with the nanowire diameter qualitatively match with data available in the literature. We have investigated the effect of the seedbed structure on the nanowires, and the effect of using different gas conditions in the growth stages. From this, we have obtained the growth mechanism, and deduced the role of each individual substrate seedbed layer in the growth of the nanowires. We report a combined growth mechanism, where the growth is initiated by a solid-liquid-solid process, which is then followed by a vapour-liquid-solid process. We also report on the formation of two distinct structures of nanowires (type I and type II). The growth of these can be controlled by the use of titanium in the seedbed. We also observe that the diameter of the nanowires exhibits an inverse relation with the catalyst thickness.

Laser-assisted hydrothermal growth of size-controlled ZnO nanorods for sensing applications.

Pulsed laser irradiation is used to seed the low-temperature hydrothermal growth of ZnO nanorods. UV laser irradiation produces ZnO nanoparticles in solution that act as nucleation seeds for the subsequent hydrothermal growth of the nanorods. By systematically varying the seed density and/or the concentration of the reactants, the diameter of the nanorods can be controlled over a wide range with a narrow size distribution. The nanorods are linked into multi-pod structures, due to nucleation at a central seed, but ultrasonic processing of the solutions is shown to yield isolated nanorods. Three-dimensional networks of these multi-pod structures are fabricated by drop-casting the solutions onto inter-digitated electrodes. These devices are used to detect ethanol, water vapour and UV light exposure.

High-rate low-temperature growth of vertically aligned carbon nanotubes.

We report the low-temperature growth of vertically aligned carbon nanotubes (CNTs) at high growth rates by a photo-thermal chemical vapour deposition (PTCVD) technique using a Ti/Fe bilayer film as the catalyst. The bulk growth temperature of the substrate is as low as 370 °C and the growth rate is up to 1.3 µm min(-1), at least eight times faster than the values reported by traditional thermal CVD methods. Transmission electron microscopy observations reveal that as-grown CNTs are uniformly made of highly crystalline 5-6 graphene shells with an approximately 10 nm outer diameter and a 5-6 nm inner diameter. The low-temperature rapid growth of CNTs is strongly related to the unique top-down heating mode of PTCVD and the use of a Ti/Fe bimetallic solid solution catalyst. The present study will advance the development of CNTs as interconnects in nanoelectronics, through a CMOS-compatible low-temperature deposition method suitable for back-end-of-line processes.