Metalloprotease SPRTN/DVC1 Orchestrates Replication-Coupled DNA-Protein Crosslink Repair.

The cytotoxicity of DNA-protein crosslinks (DPCs) is largely ascribed to their ability to block the progression of DNA replication. DPCs frequently occur in cells, either as a consequence of metabolism or exogenous agents, but the mechanism of DPC repair is not completely understood. Here, we characterize SPRTN as a specialized DNA-dependent and DNA replication-coupled metalloprotease for DPC repair. SPRTN cleaves various DNA binding substrates during S-phase progression and thus protects proliferative cells from DPC toxicity. Ruijs-Aalfs syndrome (RJALS) patient cells with monogenic and biallelic mutations in SPRTN are hypersensitive to DPC-inducing agents due to a defect in DNA replication fork progression and the inability to eliminate DPCs. We propose that SPRTN protease represents a specialized DNA replication-coupled DPC repair pathway essential for DNA replication progression and genome stability. Defective SPRTN-dependent clearance of DPCs is the molecular mechanism underlying RJALS, and DPCs are contributing to accelerated aging and cancer.

The p97-Ataxin 3 complex regulates homeostasis of the DNA damage response E3 ubiquitin ligase RNF8.

The E3 ubiquitin ligase RNF8 (RING finger protein 8) is a pivotal enzyme for DNA repair. However, RNF8 hyper-accumulation is tumour-promoting and positively correlates with genome instability, cancer cell invasion, metastasis and poor patient prognosis. Very little is known about the mechanisms regulating RNF8 homeostasis to preserve genome stability. Here, we identify the cellular machinery, composed of the p97/VCP ubiquitin-dependent unfoldase/segregase and the Ataxin 3 (ATX3) deubiquitinase, which together form a physical and functional complex with RNF8 to regulate its proteasome-dependent homeostasis under physiological conditions. Under genotoxic stress, when RNF8 is rapidly recruited to sites of DNA lesions, the p97-ATX3 machinery stimulates the extraction of RNF8 from chromatin to balance DNA repair pathway choice and promote cell survival after ionising radiation (IR). Inactivation of the p97-ATX3 complex affects the non-homologous end joining DNA repair pathway and hypersensitises human cancer cells to IR. We propose that the p97-ATX3 complex is the essential machinery for regulation of RNF8 homeostasis under both physiological and genotoxic conditions and that targeting ATX3 may be a promising strategy to radio-sensitise BRCA-deficient cancers.

Effect of strontium doping on the electrochemical pseudocapacitance of Y1-xSrxMnO3-δ perovskites.

Grid-scale bulk energy storage solutions are needed to utilize the full potential of renewable energy technologies. Pseudocapacitive electrochemical energy storage can play a vital role in developing efficient energy storage solutions. The use of perovskites as anion intercalation-type pseudocapacitor electrodes has received significant attention in recent years. In this study, Sr-doped YMnO3i.e. Y1-xSrxMnO3-δ perovskite was prepared by the solid-state ceramic route and studied for electrochemical pseudocapacitance in aqueous KOH electrolyte. Microstructures, morphologies, and electrochemical properties of these materials were investigated through X-ray diffraction (XRD), scanning electron microscopy (SEM), cyclic voltammetry (CV), galvanostatic charge/discharge (GCD), and electrochemical impedance method. The formation of the mostly cubic phase, with 50% strontium doped YMnO3 (YSMO-50) provides an equivalent three-dimensional network and superior conductivity due to Mn3+-O2--Mn4+ hopping conduction. YSMO-50 exhibited low intrinsic resistance, 1.45 Ω cm-2, and the highest specific capacity, 259.83 F g-1 at a current density of 1 A g-1 in 2 M KOH aqueous electrolyte. Redox-mediated interconversion of oxide to hydroxide (M2+O2- + H2O + e- ↔ M+OH- + OH-) in aqueous media is shown to be the reason behind the high capacitance of YSMO-50. The excellent electrochemical performance of YSMOs was attributed to the reversible interconversion of oxide-ion into hydroxide ion coupled with surface redox reaction of Mn2+/Mn3+ and Mn3+/Mn4+ occurring during the charge-discharge process. The maximum energy density of 65.13 W h kg-1 was achieved at a power density of 0.45 kW kg-1 for an asymmetric mode, in which YSMO serves as a negative electrode and Activated carbon (AC) as a positive electrode in the PVA-KOH gel electrolyte. Our study reveals that the doping of low valence atom (Sr) at the A-site in perovskite manganites (YMnO3) may be an effective tool to enhance the pseudocapacitive performance of perovskite-based electrodes.

SrFeO3-δ: a novel Fe4+ ↔ Fe2+ redox mediated pseudocapacitive electrode in aqueous electrolyte.

Pseudocapacitors offer both high energy and high power, making them suitable for grid-scale electrochemical energy storage to harness renewable energy produced from sun, wind, and tides. To overcome performance degradation in terms of cycling fading and lower specific capacitance values at high charge/discharge rates of electrochemical pseudocapacitors based on transition-metal oxides, perovskite-structured SrFeO3-δ was envisaged as a negative electrode that harnesses the Fe4+/3+ and Fe3+/2+ redox couple to deliver superior performance. SrFeO3-δ offers high specific capacitances of ca. 733 F g-1 at a scan rate of 1 mV s-1 and ca. 743 F g-1 at a current density of 1 A g-1 and demonstrates excellent cyclic stability over 2500 repeated cycles with capacitance retention of >92%, achieving 94% coulombic efficiency. The good cycling stability is attributed to the inherent metallic electrical conductivity of SrFeO3-δ and the fortuitous tendency of the robust cation framework structure to accommodate flexible oxygen content. The surface capacitive and diffusion-controlled contributions for capacitance are about ∼30% and ∼70%, respectively, at peak current and a scan rate equivalent to 1 mV s-1. The higher capacitance and stable performance make SrFeO3-δ an economical and abundant pseudocapacitive electrode.

Procerain B, a cysteine protease from Calotropis procera, requires N-terminus pro-region for activity: cDNA cloning and expression with pro-sequence.

We have previously reported isolation and characterization of a novel plant cysteine protease, Procerain B, from the latex of Calotropis procera. Our initial attempts for active recombinant Procerain B in Escherichiacoli expression system was not successful. The reason for inactive enzyme production was attributed to the absence of 5' pro-region in the Procerain B cDNA that may be involved in proper folding and production of mature active protein. The current manuscript reports the cloning of full length Procerain B for the production of the active protein. The complete cDNA sequence of Procerain B with pro-region sequence was obtained by using RNA ligase mediated rapid amplification of 5' cDNA ends (RLM-RACE). The N-terminus pro-sequence region consists of 127 amino acids and characterized as the member of inhibitory I29 family. Further the three dimensional structure of full length Procerain B was modelled by homology modelling using X-ray crystal structure of procaricain (PDB ID: 1PCI). N-terminus pro-sequence of full length Procerain B runs along the active site cleft. Full length Procerain B was expressed in prokaryotic system and activated in vitro at pH 4.0. This is the first study reporting the production of active recombinant cysteine protease from C.procera.

Iron(III) ion-assisted transformation of ZIF-67 to a self-supported FexCo-layered double hydroxide for improved water oxidation.

Herein, we have demonstrated Lewis acid Fe(III)-assisted hydroxylation of ZIF-67 to form FexCo-layered double hydroxide (LDH) nanosheets. The catalyst Fe0.4Co-LDH produced an excellent water oxidation activity to reach a current density of 20 mA cm-2 at only 190 mV overpotential, superior to that of hydrothermally synthesized LDH with a similar composition.

Photocatalytic dye-degradation activity of nano-crystalline Ti1-x M x O2-δ (M =Ag, Pd, Fe, Ni and x = 0, 0.01) for water pollution abatement.

Nanocrystalline metal-ion (M = Fe, Ni, Ag, and Pd) doped and undoped anatase-TiO2 powders were prepared using a solution combustion method. The photocatalytic degradation of different dyes such as methylene blue (MB), rhodamine B (RB), rhodamine B base (RBB), and thionine acetate (TA) was investigated under UV exposure. The degradation rate of the dyes were found to be better in the case of Ag+ and Pd2+ doped TiO2, whereas Fe3+ and Ni2+ doped TiO2 showed lower photocatalytic activity compared to undoped TiO2 nanoparticles. Combustion synthesized catalysts exhibited much better activity compared to the commercial Degussa P25 (75% anatase + 25% rutile) TiO2 photocatalyst. The intermediate states created in the band gap of the TiO2 photocatalyst due to doping of first row transition metal ions (such as Fe3+ and Ni2+) into the TiO2 lattice act as recombination centres and the electrons present in the d-orbital quench the photogenerated holes by indirect recombination, hence increasing e--h+ recombination rates. As a result, a decrease in the photocatalytic activity of TiO2 doped with first row transition metal ions is observed. However, in the case of noble metal ions (such as Ag+ and Pd2+) in TiO2, photoreduction of Ag+ and Pd2+ ions occurs upon UV irradiation, hence the noble metal-ions act as electron scavengers. Consequently, the lifetime of the holes (h+) increases and hence higher photocatalytic oxidation activity of the dyes is observed. A novel strategy of electron scavenging is envisaged here to develop Ag+ and Pd2+ doped TiO2 to increase the photocatalytic oxidation of organic dyes for the development of better water pollution abatement catalysts. Redox-pair stabilization in the TiO2 lattice similar to photo-chromic glasses play a defining role in enhancing the photocatalytic activity of the catalyst and is a key finding for the development of superior photocatalysts. With the help of UV-vis and fluorescence spectroscopy, the mechanisms of the superior oxidation activity of Pd2+ and Ag+ doped TiO2 nanoparticles are explained.

p97/VCP inhibition causes excessive MRE11-dependent DNA end resection promoting cell killing after ionizing radiation.

The ATPase p97 is a central component of the ubiquitin-proteasome degradation system. p97 uses its ATPase activity and co-factors to extract ubiquitinated substrates from different cellular locations, including DNA lesions, thereby regulating DNA repair pathway choice. Here, we find that p97 physically and functionally interacts with the MRE11-RAD50-NBS1 (MRN) complex on chromatin and that inactivation of p97 blocks the disassembly of the MRN complex from the sites of DNA damage upon ionizing radiation (IR). The inhibition of p97 function results in excessive 5'-DNA end resection mediated by MRE11 that leads to defective DNA repair and radiosensitivity. In addition, p97 inhibition by the specific small-molecule inhibitor CB-5083 increases tumor cell killing following IR both in vitro and in vivo. Mechanistically, this is mediated via increased MRE11 nuclease accumulation. This suggests that p97 inhibitors might be exploited to improve outcomes for radiotherapy patients.

SPRTN protease and checkpoint kinase 1 cross-activation loop safeguards DNA replication.

The SPRTN metalloprotease is essential for DNA-protein crosslink (DPC) repair and DNA replication in vertebrate cells. Cells deficient in SPRTN protease exhibit DPC-induced replication stress and genome instability, manifesting as premature ageing and liver cancer. Here, we provide a body of evidence suggesting that SPRTN activates the ATR-CHK1 phosphorylation signalling cascade during physiological DNA replication by proteolysis-dependent eviction of CHK1 from replicative chromatin. During this process, SPRTN proteolyses the C-terminal/inhibitory part of CHK1, liberating N-terminal CHK1 kinase active fragments. Simultaneously, CHK1 full length and its N-terminal fragments phosphorylate SPRTN at the C-terminal regulatory domain, which stimulates SPRTN recruitment to chromatin to promote unperturbed DNA replication fork progression and DPC repair. Our data suggest that a SPRTN-CHK1 cross-activation loop plays a part in DNA replication and protection from DNA replication stress. Finally, our results with purified components of this pathway further support the proposed model of a SPRTN-CHK1 cross-activation loop.

Biodegradable polycaprolactone (PCL) nanosphere encapsulating superoxide dismutase and catalase enzymes.

Biodegradable polycaprolactone (PCL) nanosphere encapsulating superoxide dismutase (SOD) and catalase (CAT) were successfully synthesized using double emulsion (w/o/w) solvent evaporation technique. Characterization of the nanosphere using dynamic light scattering, field emission scanning electron microscope, and Fourier transform infrared spectroscopy revealed a spherical-shaped nanosphere in a size range of 812 ± 64 nm with moderate protein encapsulation efficiency of 55.42 ± 3.7 % and high in vitro protein release. Human skin HaCat cells were used for analyzing antioxidative properties of SOD- and CAT-encapsulated PCL nanospheres. Oxidative stress condition in HaCat cells was optimized with exposure to hydrogen peroxide (H2O2; 1 mM) as external stress factor and verified through reactive oxygen species (ROS) analysis using H2DCFDA dye. PCL nanosphere encapsulating SOD and CAT together indicated better antioxidative defense against H2O2-induced oxidative stress in human skin HaCat cells in comparison to PCL encapsulating either SOD or CAT alone as well as against direct supplement of SOD and CAT protein solution. Increase in HaCat cells SOD and CAT activities after treatment hints toward uptake of PCL nanosphere into the human skin HaCat cells. The result signifies the role of PCL-encapsulating SOD and CAT nanosphere in alleviating oxidative stress.

cDNA cloning and molecular modeling of procerain B, a novel cysteine endopeptidase isolated from Calotropis procera.

Procerain B, a novel cysteine protease (endopeptidase) isolated from Calotropis procera belongs to Asclepiadaceae family. Purification of the enzyme, biochemical characterization and potential applications are already published by our group. Here, we report cDNA cloning, complete amino acid sequencing and molecular modeling of procerain B. The derived amino acid sequence showed high sequence homology with other papain like plant cysteine proteases of peptidase C1A superfamily. The three dimensional structure of active procerain B was modeled by homology modeling using X-ray crystal structure of actinidin (PDB ID: 3P5U), a cysteine protease from the fruits of Actinidia arguta. The structural aspect of the enzyme is also discussed.

A novel superoxide dismutase from Cicer arietinum L. seedlings: isolation, purification and characterization.

Superoxide dismutase is an important enzyme with various therapeutic applications. Search of a new source of superoxide dismutase with novel properties has significant importance. The current work reports purification of a novel superoxide dismutase enzyme with unique characteristics. A copper zinc superoxide dismutase (Cu-Zn SOD) was purified and characterized from Cicer arietinum L. seedlings germinated under aluminium (Al+3) stress. The specific activity of purified protein was 158 units/mg with 28 fold purification. The superoxide dismutase is a homodimeric protein with approx subunit molecular weight of 33.27 kDa. The enzyme is identified as Cu-Zn category of superoxide dismutase, reflected by H2O2 induced inhibition of in-gel activity and presence of quantifiable copper and zinc ions. The optimum pH range for purified Cu-Zn SOD activity was observed within 6.5-8.5 (highest at pH 8.0) and the pH stability was in the range of 6.0-8.5. The enzyme was more stable at low temperature (below 30°C) and the Km of purified Cu-Zn SOD for riboflavin as substrate was 10.16 ± 2.5 µM. The N-terminal amino acid sequence showed homology at conserved residues with other plant Cu-Zn SODs.

Immobilization of procerain B, a cysteine endopeptidase, on amberlite MB-150 beads.

Proteases are involved in several crucial biological processes and reported to have important physiological functions. They also have multifarious applications in different industries. The immobilized form of the enzyme further improves its industrial applicability. Here, we report covalent immobilization of a novel cysteine endopeptidase (procerain B) on amberlite MB-150 beads through glutaraldehyde by Schiff base linkage. The immobilized product was examined extensively by Fourier Transform Infrared Spectroscopy (FTIR), Scanning electron microscopy (SEM) and Energy Dispersive X-ray (EDX) analysis. The characterization of the immobilized product showed broader pH and thermal optima compared to the soluble form of the enzyme. The immobilized form of procerain B also showed lower Km (180.27±6 µM) compared to the soluble enzyme using azocasein as substrate. Further, immobilized procerain B retains 38.6% activity till the 10(th) use, which strongly represents its industrial candidature.

Exploring applications of procerain b, a novel protease from Calotropis procera, and characterization by N-terminal sequencing as well as peptide mass fingerprinting.

Procerain B is a novel cysteine protease isolated from Calotropis procera by our group and published recently. We have further characterized the enzyme by N-terminal sequencing and peptide mass fingerprinting. Procerain B showed maximum sequence similarity (80%) with Asclepain. Moreover, the characteristic VDWR motif of cysteine proteases is present in procerain B. The N-terminal and peptide mass fingerprinting analysis showed a distinct nature of the enzyme. Various applications of the enzyme were also evaluated. Procerain B is very effective in milk-clotting and may be a potential candidate for this process in the cheese industry. Additionally, the enzyme has potential application as dietary supplement to aid digestion. Effects of various metal ions on milk-clotting activity were also studied. The milk-clotting activity was increased in case of few metals while others have a negative effect. It is worth mentioning that the easy availability of plant material and simple purification method makes industrial production of the enzyme feasible. A protease with easy purification and suitable properties for application is always desired.

Glutaraldehyde-activated chitosan matrix for immobilization of a novel cysteine protease, procerain B.

Proteases have several applications in the food industry. We report the immobilization of procerain B, a novel cysteine protease, on glutaraldehyde-activated chitosan beads through covalent attachment. Glutaraldehyde not only serves as a cross-linking agent but also links the procerain B on the surface of bead through primary amine group (either lysine side chain or N-terminal) by Schiff base linkage. Immobilized procerain B was characterized for optimum functional range and stability with respect to pH and temperature. The chitosan-immobilized procerain B has broad pH and thermal optima. The effects of substrate concentration and reusability of immobilized beads were also studied. It showed nearly 50% activity until the 10th use.