Multiwalled Carbon Nanotubes Induce Fibrosis and Telomere Length Alterations.

Telomere shortening can result in cellular senescence and in increased level of genome instability, which are key events in numerous of cancer types. Despite this, few studies have focused on the effect of nanomaterial exposure on telomere length as a possible mechanism involved in nanomaterial-induced carcinogenesis. In this study, effects of exposure to multiwalled carbon nanotubes (MWCNT) on telomere length were investigated in mice exposed by intrapleural injection, as well as in human lung epithelial and mesothelial cell lines. In addition, cell cycle, apoptosis, and regulation of genes involved in DNA damage repair were assessed. Exposure to MWCNT led to severe fibrosis, infiltration of inflammatory cells in pleura, and mesothelial cell hyperplasia. These histological alterations were accompanied by deregulation of genes involved in fibrosis and immune cell recruitment, as well as a significant shortening of telomeres in the pleura and the lung. Assessment of key carcinogenic mechanisms in vitro confirmed that long-term exposure to the long MWCNT led to a prominent telomere shortening in epithelial cells, which coincided with G1-phase arrest and enhanced apoptosis. Altogether, our data show that telomere shortening resulting in cell cycle arrest and apoptosis may be an important mechanism in long MWCNT-induced inflammation and fibrosis.

Cellular Responses of Industrially Relevant Silica Dust on Human Glial Cells In Vitro.

Despite the rigorous emission control measures in the ferroalloy industry, there are still emissions of dust during the production of various alloys. Dust particles were collected from laboratory scale processes where oxide particulate matter was formed from liquid silicon (metallurgical grade). The dust was produced in a dry air atmosphere to mimic industrial conditions. To investigate possible effects of ultrafine dust on the central nervous system, a human astrocytic cell line was employed to investigate inflammatory effects of particles as astrocytes play a number of active and neuron supporting roles in the brain. Toxicity on the astrocytes by amorphous silica generated in laboratory scale was compared to crystalline macro-sized silica using several doses to determine toxicological dose response curves. The cell viability experiments indicated that low particle doses of amorphous silica induced a small nonsignificant reduction in cell viability compared to crystalline silica which led to increased levels of toxicity. The gene expression of amyloid precursor protein (APP), a biomarker of neurodegenerative disease, was affected by particle exposure. Furthermore, particle exposure, in a dose-and time-dependent manner, affected the ability of the cells to communicate through gap junction channels. In conclusion, in vitro studies using low doses of particles are important to understand mechanisms of toxicity of occupational exposure to silica particles. However, these studies cannot be extrapolated to real exposure scenarios at work place, therefore, controlling and keeping the particle exposure levels low at the work place, would prevent potential negative health effects.

Mechanisms of Toxicity of Industrially Relevant Silicomanganese Dust on Human 1321N1 Astrocytoma Cells: An In Vitro Study.

Tremendous efforts are applied in the ferroalloy industry to control and reduce exposure to dust generated during the production process, as inhalable Mn-containing particulate matter has been linked to neurodegenerative diseases. This study aimed to investigate the toxicity and biological effects of dust particles from laboratory-scale processes where molten silicomanganese (SiMn) was exposed to air, using a human astrocytoma cell line, 1321N1, as model system. Characterization of the dust indicated presence of both nano-sized and larger particles averaging between 100 and 300 nm. The dust consisted mainly of Si, Mn and O. Investigation of cellular mechanisms showed a dose- and time-dependent effect on cell viability, with only minor changes in the expression of proteins involved in apoptosis. Moreover, gene expression of the neurotoxic biomarker amyloid precursor protein (APP) increased, whereas APP protein expression decreased. Finally, induction of gap junctional intercellular communication (GJIC) increased with higher doses and correlated with the other endpoints. Thus, the effects of SiMn dust on 1321N1 cells are highly dependent on the dose of exposure and involves changes in APP, apoptosis-related proteins and intercellular communication.

Genome-wide interaction study of smoking behavior and non-small cell lung cancer risk in Caucasian population.

Non-small cell lung cancer is the most common type of lung cancer. Both environmental and genetic risk factors contribute to lung carcinogenesis. We conducted a genome-wide interaction analysis between single nucleotide polymorphisms (SNPs) and smoking status (never- versus ever-smokers) in a European-descent population. We adopted a two-step analysis strategy in the discovery stage: we first conducted a case-only interaction analysis to assess the relationship between SNPs and smoking behavior using 13336 non-small cell lung cancer cases. Candidate SNPs with P-value <0.001 were further analyzed using a standard case-control interaction analysis including 13970 controls. The significant SNPs with P-value <3.5 × 10-5 (correcting for multiple tests) from the case-control analysis in the discovery stage were further validated using an independent replication dataset comprising 5377 controls and 3054 non-small cell lung cancer cases. We further stratified the analysis by histological subtypes. Two novel SNPs, rs6441286 and rs17723637, were identified for overall lung cancer risk. The interaction odds ratio and meta-analysis P-value for these two SNPs were 1.24 with 6.96 × 10-7 and 1.37 with 3.49 × 10-7, respectively. In addition, interaction of smoking with rs4751674 was identified in squamous cell lung carcinoma with an odds ratio of 0.58 and P-value of 8.12 × 10-7. This study is by far the largest genome-wide SNP-smoking interaction analysis reported for lung cancer. The three identified novel SNPs provide potential candidate biomarkers for lung cancer risk screening and intervention. The results from our study reinforce that gene-smoking interactions play important roles in the etiology of lung cancer and account for part of the missing heritability of this disease.

Criteria for grouping of manufactured nanomaterials to facilitate hazard and risk assessment, a systematic review of expert opinions.

With the emergence of nanotechnology the number of manufactured nanomaterials (MNM) in production and use is constantly increasing. Exposure of workers to MNM is of concern, because still much is unknown about health effects. MNM may have different properties, testing of each material is time consuming and costly. Experts have proposed various approaches to categorize MNM to facilitate risk assessment of human health effects based on shared properties of various materials. A systematic literature survey was undertaken to identify expert opinions on grouping of MNM published between the years 2000 and 2015. We summarized and synthesized the opinions according to a systematic review of text and opinion. We identified 22 articles that fulfilled our inclusion criteria reporting 17 proposals with three proposals for groups and 14 proposals for criteria for grouping. Five proposals suggested one or more of the following groups of concern: fibrous, biopersistent, high solubility with high toxicity, chemically active. Criteria proposed in multiple studies were: viable testing options, mode of action, physicochemical properties predicting toxicity. We conclude that a limited number of groups have been proposed to categorize MNM according to human health concern. Further research should be conducted to underpin the proposed groups with empirical evidence.

Copy number variation, increased gene expression, and molecular mechanisms of neurofascin in lung cancer.

Metastasis and cell adhesion are key aspects of cancer progression. Neurofascin (NFASC) is a member of the immunoglobulin superfamily of adhesion molecules and, while studies on NFASC are inadequate, other members have been indicated pivotal roles in cancer progression and metastasis. This study aimed at increasing the knowledge on the involvement of adhesion molecules in lung cancer progression by studying the regulation and role of NFASC in non-small cell lung cancer (NSCLC). Here, copy number variations in the NFASC gene were analyzed in tumor and non-tumorous lung tissues of 204 NSCLC patients. Frequent gene amplifications (OR = 4.50, 95%CI: 2.27-8.92, P ≤ 0.001) and increased expression of NFASC (P = 0.034) were identified in tumors of NSCLC patients. Furthermore, molecular mechanisms of NFASC in lung cancer progression were evaluated by investigating the effects of NFASC silencing on cell proliferation, viability, migration, and invasion using siRNA technology in four NSCLC cell lines. Silencing of NFASC did not affect cell proliferation or viability but rather decreased NSCLC cell migration (P ≤ 0.001) and led to morphological changes, rearrangements in the actin cytoskeleton and changes in F-actin networks in migrating NSCLC cell lines. This study is the first to report frequent copy number gain and increased expression of NFASC in NSCLC. Moreover, these data suggest that NFASC is a novel regulator of NSCLC cell motility and support a role of NFASC in the regulation of NSCLC progression.

Mutations in TP53 increase the risk of SOX2 copy number alterations and silencing of TP53 reduces SOX2 expression in non-small cell lung cancer.

BACKGROUND: Amplifications of the transcription factor, SRY (sex determining region Y)-box 2 (SOX2), are common in non-small cell lung cancer (NSCLC). SOX2 signaling is important in maintaining the stem cell-like phenotype of cancer cells and contributes to the pathogenesis of lung cancer. TP53 is known to inhibit gene amplifications and to repress many stem cell-associated genes following DNA damage. The aim of this study was to investigate if TP53 mutational status affected SOX2 copy number variation and gene expression in early-stage NSCLC patients; moreover, to assess if TP53 regulates SOX2 expression in human lung cancer cells. METHODS: 258 early-stage lung cancer patients were included in the study. Exons 4-9 in the TP53 gene were sequenced for mutations in tumor tissues. SOX2 copy number as well as TP53 and SOX2 gene expression were analyzed in tumor and in adjacent non-tumorous tissues by qPCR. TP53 and SOX2 were silenced using gene-specific siRNAs in human lung adenocarcinoma A427 cells, and the expression of TP53, SOX2 and subset of selected miRNAs was analyzed by qPCR. The odds ratios (ORs) for associations between copy number variation and lung cancer were estimated by conditional logistic regression, and the correlation between gene status and clinicopathological characteristics was assessed by Chi-square or Fisher's exact test. Gene expression data was analyzed using nonparametric Mann-Whitney test. RESULTS: TP53 mutations were associated with an increased risk of acquiring a SOX2 copy number alteration (OR = 2.08, 95% CI: 1.14-3.79, p = 0.017), which was more frequently occurring in tumor tissues (34%) than in adjacent non-tumorous tissues (3%). Moreover, SOX2 and TP53 expression levels were strongly correlated in tumor tissues. In vitro studies showed that a reduction in TP53 was associated with decreased SOX2 expression in A427 cells. Furthermore, TP53 knockdown reduced the miRNA hsa-miR-145, which has previously been shown to regulate SOX2 expression. CONCLUSIONS: TP53 signaling may be important in the regulation of SOX2 copy number and expression in NSCLC tumors, and the miRNA hsa-miR-145-5p may be one potential driver. This prompts for further studies on the mechanisms behind the TP53-induced regulation of SOX2 expression and the possible importance of hsa-miR-145 in lung cancer.

Carbon Nanotube Emissions from Arc Discharge Production: Classification of Particle Types with Electron Microscopy and Comparison with Direct Reading Techniques.

INTRODUCTION: An increased production and use of carbon nanotubes (CNTs) is occurring worldwide. In parallel, a growing concern is emerging on the adverse effects the unintentional inhalation of CNTs can have on humans. There is currently a debate regarding which exposure metrics and measurement strategies are the most relevant to investigate workplace exposures to CNTs. This study investigated workplace CNT emissions using a combination of time-integrated filter sampling for scanning electron microscopy (SEM) and direct reading aerosol instruments (DRIs). MATERIAL AND METHODS: Field measurements were performed during small-scale manufacturing of multiwalled carbon nanotubes using the arc discharge technique. Measurements with highly time- and size-resolved DRI techniques were carried out both in the emission and background (far-field) zones. Novel classifications and counting criteria were set up for the SEM method. Three classes of CNT-containing particles were defined: type 1: particles with aspect ratio length:width >3:1 (fibrous particles); type 2: particles without fibre characteristics but with high CNT content; and type 3: particles with visible embedded CNTs. RESULTS: Offline sampling using SEM showed emissions of CNT-containing particles in 5 out of 11 work tasks. The particles were classified into the three classes, of which type 1, fibrous CNT particles contributed 37%. The concentration of all CNT-containing particles and the occurrence of the particle classes varied strongly between work tasks. Based on the emission measurements, it was assessed that more than 85% of the exposure originated from open handling of CNT powder during the Sieving, mechanical work-up, and packaging work task. The DRI measurements provided complementary information, which combined with SEM provided information on: (i) the background adjusted emission concentration from each work task in different particle size ranges, (ii) identification of the key procedures in each work task that lead to emission peaks, (iii) identification of emission events that affect the background, thereby leading to far-field exposure risks for workers other than the operator of the work task, and (iv) the fraction of particles emitted from each source that contains CNTs. CONCLUSIONS: There is an urgent need for a standardized/harmonized method for electron microscopy (EM) analysis of CNTs. The SEM method developed in this study can form the basis for such a harmonized protocol for the counting of CNTs. The size-resolved DRI techniques are commonly not specific enough to selective analysis of CNT-containing particles and thus cannot yet replace offline time-integrated filter sampling followed by SEM. A combination of EM and DRI techniques offers the most complete characterization of workplace emissions of CNTs today.

Involvement of IL-1 genes in the cellular responses to carbon nanotube exposure.

The interleukin-1 (IL-1) family has been implicated in cellular responses to nanoparticles including carbon nanotubes (CNTs). IL-1α and ß are key proinflammatory cytokines important in inflammatory and oxidative stress responses. The aim of this study was to characterize the role of IL-1 in cellular responses of CNTs in cells from IL-1α/ß wild type (IL1-WT) mice and cells with reduced inflammatory potential from IL-1α/ß deficient (IL1-KO) mice. Two multi-walled CNTs, CNT-1 containing long and thick fibers and CNT-2 containing short and thin fibers, were compared to UICC crocidolite asbestos fibers. Upon CNT exposure toxicity and apoptosis were affected differently in IL1-WT and IL1-KO cells. Upregulation of TNFα and IL-1α mRNA expression in IL1-WT cells was dependent on the type of CNT. On the contrary precursor IL-1α protein was downregulated after 24h. The mitogen-activated protein kinase (MAPK) c-Jun N-terminal kinase (JNK) was activated in IL1-KO cells and regulated by CNTs, whereas no significant changes of extracellular regulated kinase (ERK) were observed when comparing IL1-WT and IL1-KO cells. In summary, the results presented here indicate that IL-1 contributes to the cellular and molecular effects of CNT exposure and that the type of CNT has an important effect on the cellular response.

Electron microscopy of particles deposited in the lungs of nickel refinery workers.

The size, morphology, and chemical composition of particles deposited in the lungs of two nickel refinery workers were studied by scanning and transmission electron microscopy. The particles were extracted from the lung tissue by low-temperature ashing or by dissolution in tetramethylammonium hydroxide. The suitability of both sample preparation techniques was checked with reference materials. Both approaches lead to Fe-rich artifact particles. Low-temperature ashing leads to oxidation of small (diameter < 2 µm) metallic Ni and Ni sulfide particles, dissolution in tetramethylammonium hydroxide to removal of sulfate surface layers. Silicates and alumosilicates are the most abundant particle groups in the lungs of both subjects. From the various metal-dominated particle groups, Ni-rich particles are most abundant followed by Fe-rich and Ti-rich particles. Ni appears to be present predominantly as an oxide. Pure Ni metal and Ni sulfides were not observed. The presence of soluble Ni phases was not investigated as they will not be preserved during sample preparation. Based on their spherical morphology, it is estimated that a large fraction of Ni-rich particles (50-60 % by number) as well as Fe-rich and Cu-rich particles (27-45 %) originate from high-temperature processes (smelting, welding). This fraction is much lower for silicates (3-5 %), alumosilicates (1-2 %), and Ti-rich particles (9-11 %). The absence of metallic Ni particles most likely results from low exposure to this species. The absence of Ni sulfides may be either ascribed to low exposure or to fast clearance.

Detection of Multi-walled Carbon Nanotubes and Carbon Nanodiscs on Workplace Surfaces at a Small-Scale Producer.

BACKGROUND: The industrial use of novel-manufactured nanomaterials such as carbon nanotubes and carbon nanodiscs is increasing globally. Occupational exposure can occur during production, downstream use, and disposal. The health effects of many nanomaterials are not yet fully characterized and to handle nano-objects, their aggregates and agglomerates >100nm (NOAA), a high degree of control measures and personal protective equipment are required. The emission of airborne NOAA during production and handling can contaminate workplace surfaces with dust, which can be resuspended resulting in secondary inhalation exposures and dermal exposures. This study surveys the presence of carbon-based nanomaterials, such as multi-walled carbon nanotubes (MWCNTs) and carbon nanodiscs, as surface contamination at a small-scale producer using a novel tape sampling method. METHODS: Eighteen different surfaces at a small-scale producer were sampled with an adhesive tape sampling method. The surfaces selected were associated with the production and handling of MWCNT powder in the near-field zone. Surfaces in the far-field zone were also sampled. In addition, tape stripping of the skin was performed on one worker. The tape samples were analysed with scanning electron microscopy to detect the carbon-based NOAA. Air sampling with a personal impactor was also performed on a worker who was producing MWCNTs the same day as the tape samples were collected. RESULTS: MWCNTs were detected in 50% of the collected tape samples and carbon nanodiscs in 17%. MWCNTs and carbon nanodiscs were identified in all parts of the workplace, thus, increasing the risk for secondary inhalation and dermal exposure of the workers. Both airborne MWCNTs and carbon nanodiscs were detected in the personal impactor samples. The tape-strip samples from the worker showed no presence of carbon-containing nanoparticles. CONCLUSIONS: Tape sampling is a functional method for detecting surface contamination of carbon-based NOAA and for exposure control during production at potentially any workplace that produces or handles such manufactured nanomaterials. With the tape method, it is possible to monitor if a potential for secondary inhalation exposure or dermal exposure exists through resuspension of dust deposited on workplace surfaces. By means of air sampling, we could confirm that carbon nanodiscs were resuspended into the air at the workplace even though they were not handled during that particular work shift. MWCNTs were detected in the air samples, but can have been derived from either resuspension or from the work tasks with MWCNTs that were performed during the air sampling. Tape sampling is a complementary method to air sampling and together these two methods provide a better view of the hygienic situation in workplaces where NOAA can be emitted into work environments.

Exposure and emission measurements during production, purification, and functionalization of arc-discharge-produced multi-walled carbon nanotubes.

BACKGROUND: The production and use of carbon nanotubes (CNTs) is rapidly growing. With increased production, there is potential that the number of occupational exposed workers will rapidly increase. Toxicological studies on rats have shown effects in the lungs, e.g., inflammation, granuloma formation, and fibrosis after repeated inhalation exposure to some forms of multi-walled CNTs (MWCNTs). Still, when it comes to health effects, it is unknown which dose metric is most relevant. Limited exposure data for CNTs exist today and no legally enforced occupational exposure limits are yet established. The aim of this work was to quantify the occupational exposures and emissions during arc discharge production, purification, and functionalization of MWCNTs. The CNT material handled typically had a mean length <5 µm. Since most of the collected airborne CNTs did not fulfil the World Health Organization fibre dimensions (79% of the counted CNT-containing particles) and since no microscopy-based method for counting of CNTs exists, we decided to count all particle that contained CNTs. To investigate correlations between the used exposure metrics, Pearson correlation coefficient was used. METHODS: Exposure measurements were performed at a small-scale producer of MWCNTs and respirable fractions of dust concentrations, elemental carbon (EC) concentrations, and number concentrations of CNT-containing particles were measured in the workers' breathing zones with filter-based methods during work. Additionally, emission measurements near the source were carried out during different work tasks. Respirable dust was gravimetrically determined; EC was analysed with thermal-optical analysis and the number of CNT-containing particles was analysed with scanning electron microscopy. RESULTS: For the personal exposure measurements, respirable dust ranged between <73 and 93 µg m(-3), EC ranged between <0.08 and 7.4 µg C m(-3), and number concentration of CNT-containing particles ranged between 0.04 and 2.0 cm(-3). For the emission measurements, respirable dust ranged between <2800 and 6800 µg m(-3), EC ranged between 0.05 and 550 µg C m(-3), and number concentration of CNT-containing particles ranged between <0.20 and 11cm(-3). CONCLUSIONS: The highest exposure to CNTs occurred during production of CNTs. The highest emitted number concentration of CNT-containing particles occurred in the sieving, mechanical work-up, pouring, weighing, and packaging of CNT powder during the production stage. To be able to quantify exposures and emissions of CNTs, a selective and sensitive method is needed. Limitations with measuring EC and respirable dust are that these exposure metrics do not measure CNTs specifically. Only filter-based methods with electron microscopy analysis are, to date, selective and sensitive enough. This study showed that counting of CNT-containing particles is the method that fulfils those criteria and is therefore the method recommended for future quantification of CNT exposures. However, CNTs could be highly toxic not only because of their length but also because they could contain, for example transition metals and polycyclic aromatic hydrocarbons, or have surface defects. Lack of standardized counting criteria for CNTs to be applied at the electron microscopy analysis is a limiting factor, which makes it difficult to compare exposure data from different studies.

Cigarette smoking increases copy number alterations in nonsmall-cell lung cancer.

Cigarette smoking has been a well-established risk factor of lung cancer for decades. How smoking contributes to tumorigenesis in the lung remains not fully understood. Here we report the results of a genome-wide study of DNA copy number and smoking pack-years in a large collection of nonsmall-cell lung cancer (NSCLC) tumors. Genome-wide analyses of DNA copy number and pack-years of cigarette smoking were performed on 264 NSCLC tumors, which were divided into discovery and validation sets. The copy number-smoking associations were investigated in three scales: whole-genome, chromosome/arm, and focal regions. We found that heavy cigarette smokers (>60 pack-years) have significantly more copy number gains than non- or light smokers (≤60 pack-years) (P = 2.46 × 10(-4)), especially in 8q and 12q. Copy number losses tend to occur away from genes in non/light smokers (P = 5.15 × 10(-5)) but not in heavy smokers (P = 0.52). Focal copy number analyses showed that there are strong associations of copy number and cigarette smoking pack-years in 12q23 (P = 9.69 × 10(-10)) where IGF1 (insulin-like growth factor 1) is located. All of the above analyses were tested in the discovery set and confirmed in the validation set. DNA double-strand break assays using human bronchial epithelial cell lines treated with cigarette smoke condensate were also performed, and indicated that cigarette smoke condensate leads to genome instability in human bronchial epithelial cells. We conclude that cigarette smoking leads to more copy number alterations, which may be mediated by the genome instability.

Functional effect of polymorphisms in 15q25 locus on CHRNA5 mRNA, bulky DNA adducts and TP53 mutations.

Genome-wide association studies have demonstrated that genetic polymorphisms influence the risk of developing lung cancer. Nicotinic acetylcholine receptor alpha3, alpha5 and beta4 genes (CHRNA3, CHRNA5 and CHRNB4) cluster at the 15q25.1 lung cancer susceptibility locus. We genotyped 310 patients with non-small cell lung cancer and a control group of 348 cancer-free individuals for seven sequence variants located in CHRNA3 and CHRNA5 genes. Two of the polymorphisms (rs3829787 and rs3841324) statistically influenced the risk of developing lung cancer. We found that four of the variants (rs3829787, rs3841324, rs588765 and rs3743073) were associated with differential levels of genetic alterations measured as the levels of hydrophobic DNA adducts in the adjacent histologically normal tissue of the lung cancer patients and as TP53 mutations in their lung tumors. The seven sequence variants formed three haplotypes with a frequency above 5%. The two most frequent haplotypes were associated with the risk of developing lung cancer and with smoking-related DNA alterations. We also found an association between CHRNA5 mRNA levels and the sequence variants or haplotypes. In conclusion, our results showed that several of the polymorphisms and their haplotypes in CHRNA5/CHRNA3 genes may have functional effects on (i) CHRNA5 mRNA levels, (ii) polycyclic aromatic hydrocarbon-DNA adduct levels, (iii) TP53 mutations and (iv) susceptibility to lung cancer.

DNA methylation at promoter regions of interleukin 1B, interleukin 6, and interleukin 8 in non-small cell lung cancer.

Epidemiologic and experimental evidences support the concept that inflammation promotes the development and progression of cancers. Interleukins (ILs) regulate the expression of several molecules and signaling pathways involved in inflammation. High expression of some ILs in the tumor microenvironment has been associated with a more virulent tumor phenotype. To examine the role of IL-1ß, IL-6, and IL-8 in non-small cell lung cancer, we measured mRNA levels and promoter DNA methylation in a panel of cultured human lung cells (n = 23) and in matched pair lung tumor versus adjacent non-tumorous tissues (n = 24). We found that lung cancer cells or tissues had significantly different DNA methylation and mRNA levels than normal human bronchial epithelial cells or adjacent non-tumorous tissues, respectively. High DNA methylation of ILs promoters in lung cancer cells or tissues was associated with low mRNA levels. We found an inverse correlation between DNA methylation of IL1B, IL6, and IL8 gene promoters and their corresponding mRNA levels, such inverse correlation was more significant for IL1B (i.e., all cancer cell lines used in this study had a hypermethylated IL1B promoter which was associated with silencing of the gene). Our results underline for the first time the role of epigenetic modifications in the regulation of the expression of key cytokines involved in the inflammatory response during lung cancer development.

DNA methylation of the CYP1A1 enhancer is associated with smoking-induced genetic alterations in human lung.

CYP1A1 (cytochrome P4501A1) catalyze the conversion of polycyclic aromatic hydrocarbons into reactive metabolites, which may induce DNA damage. We hypothesized that DNA methylation of the CYP1A1 enhancer could be involved in inter-individual differences in mRNA levels of CYP1A1 or affect the smoking-induced DNA damage in human lung. Using DNA bisulfite conversion and pyrosequencing, we show that DNA methylation of the CYP1A1 enhancer is affected by smoking. In adjacent histologically normal lung from lung cancer patients (n = 120), low levels of DNA methylation of the CYP1A1 enhancer were related to high levels of smoking-induced hydrophobic DNA adduct (p < 0.03), and to the presence of TP53 or K-ras mutations in the corresponding lung tumors (p < 0.03). We found an inverse correlation between DNA methylation of the CYP1A1 enhancer and mRNA levels in vivo (Spearman r = -0.54; p < 0.0001). Thus, in lung tumor tissues, the CYP1A1 enhancer hypermethylation was associated with lower mRNA levels compared to adjacent histologically normal tissue (p < 0.0001). In vitro, using a panel of cultured human lung cells, we found hypermethylation of the CYP1A1 enhancer in cancer cell lines and an inverse correlation between DNA methylation and mRNA levels (Spearman r = -0.53; p = 0.003). Altogether, our results indicated that low levels of DNA methylation of the CYP1A1 enhancer in histologically normal human lung were associated with high CYP1A1 mRNA levels and with smoking-induced genetic alterations; thus, it may play a role in the initiation of lung carcinogenesis.

Proposal on limits for chemical exposure in saturation divers' working atmosphere: the case of benzene.

Saturation diving is performed under extreme environmental conditions. The divers are confined to a limited space for several weeks under high environmental pressure and elevated oxygen partial pressure. At present, divers are protected against chemical exposure by standard exposure limits only adjusted for the increased exposure length, i.e. from 8 to 24 hours a day and from 5 to 7 days a week. The objective of the present study was to indicate a procedure for derivation of occupational exposure limits for saturation diving, termed hyperbaric exposure limits (HEL). Using benzene as an example, a procedure is described that includes identification of the latest key documents, extensive literature search with defined exclusion criteria for the literature retrieved. Hematotoxicity and leukemia were defined as the critical effects, and exposure limits based upon concentration and cumulative exposure data and corresponding risks of leukemia were calculated. Possible interactions of high pressure, elevated pO2, and continuous exposure have been assessed, and incorporated in a final suggestion of a HEL for benzene. The procedure should be applicable for other relevant chemicals in the divers' breathing atmosphere. It is emphasized that the lack of interactions from pressure and oxygen indicated for benzene may be completely different for other chemicals.

Multi-elemental bio-imaging of rat tissue from a study investigating the bioavailability of bismuth from shotgun pellets.

In recent years, bismuth has been promoted as a "green element" and is used as a substitute for the toxic lead in ammunition and other applications. However, the bioavailability and toxicity of bismuth is still not very well described. Following a hunting accident with bismuth-containing shots, a bioavailability study of bismuth from metal pellets inoculated into rat limb muscles was carried out. Bismuth could be found in urine and blood of the animals. Bio-imaging using laser ablation ICP-MS of thin sections of the tissue around the metal implant was carried out to find out more about the distribution of the metal diffusing into the tissue. Two laser ablation systems with different ablation cell designs were compared regarding their analytical performance. Low concentrations of bismuth showing a non-symmetrical pattern were detected in the tissue surrounding the metal implant. This was partly an artefact from cutting the thin sections but also bio-mobilisation of the metals of the implant could be seen. An accumulation of zinc around the implant was interpreted as a marker of inflammation. Challenges regarding sample preparation for laser ablation and bio-imaging of samples of diverse composition became apparent during the analysis.

Serum estrogen and tumor-positive estrogen receptor-alpha are strong prognostic classifiers of non-small-cell lung cancer survival in both men and women.

The role of tumor estrogen receptors (ERs) and serum estrogen in lung cancer is inconclusive. We investigated the hypothesis that ERs and functional single-nucleotide polymorphisms in the estrogen biosynthesis pathway are associated with poorer lung cancer survival. Lung cancer patients (n = 305) from a National Cancer Institute-Maryland (NCI-MD) case-case cohort in the Baltimore metropolitan area were used as a test cohort. To validate, 227 cases from the NCI-MD case-control cohort and 293 cases from a Norwegian lung cancer cohort were studied. Information on demographics, tobacco and reproductive histories was collected in an interviewer-administered questionnaire. Serum estrogen, progesterone, tumor messenger RNA expression of hormone receptors and germ line DNA polymorphisms were analyzed for associations with lung cancer survival. Patients in the highest tertile of serum estrogen had worse survival in all three cohorts (P combined < 0.001). Furthermore, the variant allele of estrogen receptor alpha (ER-α) polymorphism (rs2228480) was significantly associated with increased tumor ER-α levels and worse survival in all three cohorts [hazard ratio (HR) = 2.59, 95% confidence interval (CI): 1.20- 4.01; HR = 1.76, 95% CI: 1.08-2.87 and HR = 2.85, 95% CI: 1.31-4.36). Other polymorphisms associated with lower serum estrogen correlated with improved survival. Results were independent of gender and hormone replacement therapy. We report a significant association of increased serum estrogen with poorer survival among lung cancer male and female patients. Understanding the genetic control of estrogen biosynthesis and response in lung cancer could lead to improved prognosis and therapy.