Reorientation of Sputnik Planitia implies a subsurface ocean on Pluto.

The deep nitrogen-covered basin on Pluto, informally named Sputnik Planitia, is located very close to the longitude of Pluto's tidal axis and may be an impact feature, by analogy with other large basins in the Solar System. Reorientation of Sputnik Planitia arising from tidal and rotational torques can explain the basin's present-day location, but requires the feature to be a positive gravity anomaly, despite its negative topography. Here we argue that if Sputnik Planitia did indeed form as a result of an impact and if Pluto possesses a subsurface ocean, the required positive gravity anomaly would naturally result because of shell thinning and ocean uplift, followed by later modest nitrogen deposition. Without a subsurface ocean, a positive gravity anomaly requires an implausibly thick nitrogen layer (exceeding 40 kilometres). To prolong the lifetime of such a subsurface ocean to the present day and to maintain ocean uplift, a rigid, conductive water-ice shell is required. Because nitrogen deposition is latitude-dependent, nitrogen loading and reorientation may have exhibited complex feedbacks.

Convection in a volatile nitrogen-ice-rich layer drives Pluto's geological vigour.

The vast, deep, volatile-ice-filled basin informally named Sputnik Planum is central to Pluto's vigorous geological activity. Composed of molecular nitrogen, methane, and carbon monoxide ices, but dominated by nitrogen ice, this layer is organized into cells or polygons, typically about 10 to 40 kilometres across, that resemble the surface manifestation of solid-state convection. Here we report, on the basis of available rheological measurements, that solid layers of nitrogen ice with a thickness in excess of about one kilometre should undergo convection for estimated present-day heat-flow conditions on Pluto. More importantly, we show numerically that convective overturn in a several-kilometre-thick layer of solid nitrogen can explain the great lateral width of the cells. The temperature dependence of nitrogen-ice viscosity implies that the ice layer convects in the so-called sluggish lid regime, a unique convective mode not previously definitively observed in the Solar System. Average surface horizontal velocities of a few centimetres a year imply surface transport or renewal times of about 500,000 years, well under the ten-million-year upper-limit crater retention age for Sputnik Planum. Similar convective surface renewal may also occur on other dwarf planets in the Kuiper belt, which may help to explain the high albedos shown by some of these bodies.

Animal agriculture exposures among Minnesota residents with zoonotic enteric infections, 2012-2016.

Prospective, population-based surveillance to systematically ascertain exposures to food production animals or their environments among Minnesota residents with sporadic, domestically acquired, laboratory-confirmed enteric zoonotic pathogen infections was conducted from 2012 through 2016. Twenty-three percent (n = 1708) of the 7560 enteric disease cases in the study reported an animal agriculture exposure in their incubation period, including 60% (344/571) of Cryptosporidium parvum cases, 28% (934/3391) of Campylobacter cases, 22% (85/383) of Shiga toxin-producing Escherichia coli (STEC) O157 cases, 16% (83/521) of non-O157 STEC cases, 10% (253/2575) of non-typhoidal Salmonella enterica cases and 8% (9/119) of Yersinia enterocolitica cases. Living and/or working on a farm accounted for 61% of cases with an agricultural exposure, followed by visiting a private farm (29% of cases) and visiting a public animal agriculture venue (10% of cases). Cattle were the most common animal type in agricultural exposures, reported by 72% of cases. The estimated cumulative incidence of zoonotic enteric infections for people who live and/or work on farms with food production animals in Minnesota during 2012-2016 was 147 per 10 000 population, vs. 18.5 per 10 000 for other Minnesotans. The burden of enteric zoonoses among people with animal agriculture exposures appears to be far greater than previously appreciated.

Prospective Salmonella Enteritidis surveillance and outbreak detection using whole genome sequencing, Minnesota 2015-2017.

Clusters of Salmonella Enteritidis cases were identified by the Minnesota Department of Health using both pulsed-field gel electrophoresis (PFGE) and whole genome sequencing (WGS) single nucleotide polymorphism analysis from 1 January 2015 through 31 December 2017. The median turnaround time for obtaining WGS results was 11 days longer than for PFGE (12 vs. 1 day). WGS analysis more than doubled the number of clusters compared to PFGE analysis, but reduced the total number of cases included in clusters by 34%. The median cluster size was two cases for WGS compared to four for PFGE, and the median duration of WGS clusters was 27 days shorter than PFGE clusters. While the percentage of PFGE clusters with a confirmed source (46%) was higher than WGS clusters (32%), a higher percentage of cases in clusters that were confirmed as outbreaks reported the vehicle or exposure of interest for WGS (78%) than PFGE (46%). WGS cluster size was a significant predictor of an outbreak source being confirmed. WGS data have enhanced S. Enteritidis cluster investigations in Minnesota by improving the specificity of cluster case definitions and has become an integral part of the S. Enteritidis surveillance process.

Observation of Weakened V-V Dimers in the Monoclinic Metallic Phase of Strained VO_{2}.

Emergent order at mesoscopic length scales in condensed matter can provide fundamental insight into the underlying competing interactions and their relationship with the order parameter. Using spectromicroscopy, we show that mesoscopic stripe order near the metal-insulator transition (MIT) of strained VO_{2} represents periodic modulations in both crystal symmetry and V-V dimerization. Above the MIT, we unexpectedly find the long-range order of V-V dimer strength and crystal symmetry become dissociated beyond ≈200 nm, whereas the conductivity transition proceeds homogeneously in a narrow temperature range.

In situ observations of a possible skate nursery off the western Antarctic Peninsula.

A dense aggregation of skate egg cases was imaged during a photographic survey of the sea floor along the western Antarctic Peninsula in November 2013. Egg cases were noted in a narrow band between 394 and 443 m depth. Although some skate species in other oceans are known to utilize restricted areas to deposit eggs in great numbers, such nurseries have not been described in the Southern Ocean.

Direct observation of decoupled structural and electronic transitions and an ambient pressure monocliniclike metallic phase of VO2.

We report the simultaneous measurement of the structural and electronic components of the metal-insulator transition (MIT) of VO2 using electron and photoelectron spectroscopies and microscopies. We show that these evolve over different temperature scales, and are separated by an unusual monocliniclike metallic phase. Our results provide conclusive evidence that the new monocliniclike metallic phase, recently identified in high-pressure and nonequilibrium measurements, is accessible in the thermodynamic transition at ambient pressure, and we discuss the implications of these observations on the nature of the MIT in VO2.

X-ray absorption spectroscopy and resonant inelastic scattering study of the first lithiation cycle of the Li-ion battery cathode Li(2-x)MnSiO4.

We employ soft X-ray absorption spectroscopy and resonant inelastic X-ray scattering spectroscopy to study the redox behavior in the first lithiation/delithiation cycle of Li(2-x)MnSiO4 (4.0-4.6 V). For extraction of lithium ions up to an end potential of 4.1 V, we do not detect any change in the oxidation state for the expected redox-active Mn atom, instead the electronic structure of the Si-O network is affected. Above 4.1 V, there is an abrupt change in the oxidation state of the Mn-ions, from 2+ to 4+, which is accompanied by a complete loss of long range order in the material, as detected by X-ray diffraction. Further lithium extraction leads to progressive loss of crystallinity of Li(2-x)MnSiO4, rather than formation of a new structure, explaining the measured first-cycle capacity loss of this material. Our results suggest that future improvement of the crystalline stability of the material, particularly with respect to the SiO4 network, is required to harness the full charge capacity of Li(2-x)MnSiO4.

Resonant soft-X-ray emission as a bulk probe of correlated electron behavior in metallic SrxCa1-xVO3.

The evolution of electron correlation in SrxCa1-xVO3 has been studied using a combination of bulk-sensitive resonant soft x-ray emission spectroscopy, surface-sensitive photoemission spectroscopy, and ab initio band structure calculations. We show that the effect of electron correlation is enhanced at the surface. Strong incoherent Hubbard subbands are found to lie ∼20% closer in energy to the coherent quasiparticle features in surface-sensitive photoemission spectroscopy measurements compared with those from bulk-sensitive resonant soft x-ray emission spectroscopy, and a ∼10% narrowing of the overall bandwidth at the surface is also observed.

Influence of oxygenated organic aerosols (OOAs) on the oxidative potential of diesel and biodiesel particulate matter.

Generally, the magnitude of pollutant emissions from diesel engines running on biodiesel fuel is ultimately coupled to the structure of the fuel's constituent molecules. Previous studies demonstrated the relationship between the organic fraction of particulate matter (PM) and its oxidative potential. Herein, emissions from a diesel engine running on different biofuels were analyzed in more detail to explore the role that different organic fractions play in the measured oxidative potential. In this work, a more detailed chemical analysis of biofuel PM was undertaken using a compact time of flight aerosol mass spectrometer (c-ToF AMS). This enabled a better identification of the different organic fractions that contribute to the overall measured oxidative potentials. The concentration of reactive oxygen species (ROS) was measured using a profluorescent nitroxide molecular probe 9-(1,1,3,3-tetramethylisoindolin-2-yloxyl-5-ethynyl)-10-(phenylethynyl)anthracene (BPEAnit). Therefore, the oxidative potential of the PM, measured through the ROS content, although proportional to the total organic content in certain cases, shows a much higher correlation with the oxygenated organic fraction as measured by the c-ToF AMS. This highlights the importance of knowing the surface chemistry of particles for assessing their health impacts. It also sheds light onto new aspects of particulate emissions that should be taken into account when establishing relevant metrics for assessing health implications of replacing diesel with alternative fuels.

Determination of the individual atomic site contribution to the electronic structure of 3,4,9,10-perylene-tetracarboxylic-dianhydride (PTCDA).

We have studied the element and orbital-specific electronic structure of thin films of 3,4,9,10-perylene-tetracarboxylic-dianhydride (PTCDA) using a combination of synchrotron radiation-exited resonant x-ray emission spectroscopy, x-ray absorption spectroscopy, x-ray photoelectron spectroscopy, as well as density functional theory calculations. Resonant and non-resonant x-ray emission spectroscopies were used to measure the C and O 2p partial densities of state in PTCDA. Furthermore, resonant x-ray emission at the C and O K-edges is shown to be able to measure the partial densities of states associated with individual atomic sites. The flat molecular orientation of PTCDA on various substrates is explained in terms of the carbonyl O atom acting as a hydrogen-bond acceptor leading to multiple in-plane intermolecular C=O···H-C hydrogen bonding between carbonyl groups and the perylene core of the neighboring PTCDA molecules. We support this conclusion by comparison of our calculations to measurements of the electronic structure using element-, site-, and orbital-selective C and O K-edge resonant x-ray emission spectroscopy, and photoemission spectroscopy.

Assessment of technical and biological parameters of volumetric quantitative computed tomography of the foot: a phantom study.

SUMMARY: Few studies exist for bone densitometry of the whole foot. A phantom study demonstrated the sources of error and necessary controls for accurate quantitative computed tomography of the foot. A loss in bone mineral density (BMD) in the small foot bones may be an early indicator of diabetic foot complications. INTRODUCTION: Volumetric quantitative computed tomography (vQCT) facilitates the assessment of pedal bone osteopenia, which, in the presence of peripheral neuropathy, may well be an early sign of diabetic foot deformity. To date, sources and magnitudes of error in foot vQCT measurements have not been reported. METHODS: Foot phantoms were scanned using a 64-slice CT scanner. Energy (in kilovoltage peak), table height, phantom size and orientation, location of "bone" inserts, insert material, location of calibration phantom, and reconstruction kernel were systematically varied during scan acquisition. RESULTS: Energy (in kilovoltage peak) and distance from the isocenter (table height) resulted in relative attenuation changes from -5% to 22% and -5% to 0%, respectively, and average BMD changes from -0.9% to 0.0% and -1.1% to 0.3%, respectively, compared to a baseline 120-kVp scan performed at the isocenter. BMD compared to manufacturer-specified values ranged, on average, from -2.2% to 0.9%. Phantom size and location of bone-equivalent material inserts resulted in relative attenuation changes of -1.2% to 1.4% compared to the medium-sized phantom. CONCLUSION: This study demonstrated that variations in kilovoltage peak and table height can be controlled using a calibration phantom scanned at the same energy and height as a foot phantom; however, error due to soft tissue thickness and location of bones within a foot cannot be controlled using a calibration phantom alone.

Dynamics of Escherichia coli O157:H7 outbreak detection and investigation, Minnesota 2000-2008.

We determined characteristics of Escherichia coli O157:H7 pulsed-field gel electrophoresis clusters that predict their being solved (i.e. that result in identification of a confirmed outbreak). Clusters were investigated by the Minnesota Department of Health (MDH) using a dynamic iterative model. During 2000-2008, 19 (23%) of 84 clusters were solved. Clusters of ≥3 isolates were more likely to be solved than clusters of two isolates. Clusters in which the first two case isolates were received at MDH on the same day were more likely to be solved than were clusters in which the first two case isolates were received over ≥8 days. Investigation of clusters of ≥3 E. coli O157:H7 cases increased the success of cluster investigations.

Vomiting, electrolyte disturbance, and medications; the perfect storm for acquired long QT syndrome and cardiac arrest: a case report.

BACKGROUND: Acquired long QT syndrome is an important and preventable cause of cardiac arrest. Certain medications and electrolyte disturbance are common contributors, and often coexist. In this case, we report five contributors to cardiac arrest. CASE PRESENTATION: This case is of a 51-year-old Caucasian female patient who presented with vomiting associated with hypokalemia and hypomagnesemia. She subsequently received ondansetron and metoclopramide, on the background of chronic treatment with fluoxetine. She then suffered an in-hospital monitored cardiac arrest, with features of long QT and torsades de pointes retrospectively noted on her prearrest electrocardiogram. She was diagnosed with acquired long QT syndrome, and her QT interval later normalized after removal of offending causes. CONCLUSIONS: This case highlights the importance of proper consideration prior to prescribing QT prolonging medications, especially in patients who have other risk factors for prolonged QT, such as electrolyte disturbances and pretreatment with QT prolonging medications.

Physicochemical characterization of particulate emissions from a compression ignition engine: the influence of biodiesel feedstock.

This study undertook a physicochemical characterization of particle emissions from a single compression ignition engine operated at one test mode with 3 biodiesel fuels made from 3 different feedstocks (i.e., soy, tallow, and canola) at 4 different blend percentages (20%, 40%, 60%, and 80%) to gain insights into their particle-related health effects. Particle physical properties were inferred by measuring particle number size distributions both with and without heating within a thermodenuder (TD) and also by measuring particulate matter (PM) emission factors with an aerodynamic diameter less than 10 µm (PM(10)). The chemical properties of particulates were investigated by measuring particle and vapor phase Polycyclic Aromatic Hydrocarbons (PAHs) and also Reactive Oxygen Species (ROS) concentrations. The particle number size distributions showed strong dependency on feedstock and blend percentage with some fuel types showing increased particle number emissions, while others showed particle number reductions. In addition, the median particle diameter decreased as the blend percentage was increased. Particle and vapor phase PAHs were generally reduced with biodiesel, with the results being relatively independent of the blend percentage. The ROS concentrations increased monotonically with biodiesel blend percentage but did not exhibit strong feedstock variability. Furthermore, the ROS concentrations correlated quite well with the organic volume percentage of particles - a quantity which increased with increasing blend percentage. At higher blend percentages, the particle surface area was significantly reduced, but the particles were internally mixed with a greater organic volume percentage (containing ROS) which has implications for using surface area as a regulatory metric for diesel particulate matter (DPM) emissions.

Physicochemical characterization of particulate emissions from a compression ignition engine employing two injection technologies and three fuels.

Alternative fuels and injection technologies are a necessary component of particulate emission reduction strategies for compression ignition engines. Consequently, this study undertakes a physicochemical characterization of diesel particulate matter (DPM) for engines equipped with alternative injection technologies (direct injection and common rail) and alternative fuels (ultra low sulfur diesel, a 20% biodiesel blend, and a synthetic diesel). Particle physical properties were addressed by measuring particle number size distributions, and particle chemical properties were addressed by measuring polycyclic aromatic hydrocarbons (PAHs) and reactive oxygen species (ROS). Particle volatility was determined by passing the polydisperse size distribution through a thermodenuder set to 300 °C. The results from this study, conducted over a four point test cycle, showed that both fuel type and injection technology have an impact on particle emissions, but injection technology was the more important factor. Significant particle number emission (54%-84%) reductions were achieved at half load operation (1% increase-43% decrease at full load) with the common rail injection system; however, the particles had a significantly higher PAH fraction (by a factor of 2 to 4) and ROS concentrations (by a factor of 6 to 16) both expressed on a test-cycle averaged basis. The results of this study have significant implications for the health effects of DPM emissions from both direct injection and common rail engines utilizing various alternative fuels.

The UCSC Genome Browser Database: update 2009.

The UCSC Genome Browser Database (GBD, http://genome.ucsc.edu) is a publicly available collection of genome assembly sequence data and integrated annotations for a large number of organisms, including extensive comparative-genomic resources. In the past year, 13 new genome assemblies have been added, including two important primate species, orangutan and marmoset, bringing the total to 46 assemblies for 24 different vertebrates and 39 assemblies for 22 different invertebrate animals. The GBD datasets may be viewed graphically with the UCSC Genome Browser, which uses a coordinate-based display system allowing users to juxtapose a wide variety of data. These data include all mRNAs from GenBank mapped to all organisms, RefSeq alignments, gene predictions, regulatory elements, gene expression data, repeats, SNPs and other variation data, as well as pairwise and multiple-genome alignments. A variety of other bioinformatics tools are also provided, including BLAT, the Table Browser, the Gene Sorter, the Proteome Browser, VisiGene and Genome Graphs.

Public understandings of potential policy responses to health inequalities: Evidence from a UK national survey and citizens' juries in three UK cities.

A substantial body of research describes the distribution, causes and potential reduction of health inequalities, yet little scholarship examines public understandings of these inequalities. Existing work is dominated by small-scale, qualitative studies of the experiences of specific communities. As a result, we know very little about what broader publics think about health inequalities; and even less about public views of potential policy responses. This is an important gap since previous research shows many researchers and policymakers believe proposals for 'upstream' policies are unlikely to attract sufficient public support to be viable. This mixed methods study combined a nationally representative survey with three two-day citizens' juries exploring public views of health inequalities and potential policy responses in three UK cities (Glasgow, Manchester and Liverpool) in July 2016. Comparing public opinion elicited via a survey to public reasoning generated through deliberative processes offers insight into the formation of public views. The results challenge perceptions that there is a lack of public support for upstream, macro-level policy proposals and instead demonstrate support for proposals aiming to tackle health inequalities via improvements to living and working conditions, with more limited support for proposals targeting individual behavioural change. At the same time, some macro-economic proposals, notably those involving tax increases, proved controversial among study participants and results varied markedly by data source. Our analysis suggests that this results from three intersecting factors: a resistance to ideas viewed as disempowering (which include, fundamentally, the idea that health inequalities exist); the prevalence of individualising and fatalistic discourses, which inform resistance to diverse policy proposals (but especially those that are more 'upstream', macro-level proposals); and a lack of trust in (local and national) government. This suggests that efforts to enhance public support for evidence-informed policy responses to health inequalities may struggle unless these broader challenges are also addressed.

Oxidative potential of logwood and pellet burning particles assessed by a novel profluorescent nitroxide probe.

This study reports the potential toxicological impact of particles produced during biomass combustion by an automatic pellet boiler and a traditional logwood stove under various combustion conditions using a novel profluorescent nitroxide probe, BPEAnit. This probe is weakly fluorescent but yields strong fluorescence emission upon radical trapping or redox activity. Samples were collected by bubbling aerosol through an impinger containing BPEAnit solution, followed by fluorescence measurement. The fluorescence of BPEAnit was measured for particles produced during various combustion phases: at the beginning of burning (cold start), stable combustion after refilling with the fuel (warm start), and poor burning conditions. For particles produced by the logwood stove under cold-start conditions, significantly higher amounts of reactive species per unit of particulate mass were observed compared to emissions produced during a warm start. In addition, sampling of logwood burning emissions after passing through a thermodenuder at 250 degrees C resulted in an 80-100% reduction of the fluorescence signal of the BPEAnit probe, indicating that the majority of reactive species were semivolatile. Moreover, the amount of reactive species showed a strong correlation with the amount of particulate organic material. This indicates the importance of semivolatile organics in particle-related toxicity. Particle emissions from the pellet boiler, although of similar mass concentration, were not observed to lead to an increase in fluorescence signal during any of the combustion phases.