RESUMEN
New nickel-containing ionic liquids were synthesized, characterized and their electrochemistry was investigated. In addition, a mechanism for the electrochemical synthesis of nanoparticles from these compounds is proposed. In these so-called liquid metal salts, the nickel(II) cation is octahedrally coordinated by six N-alkylimidazole ligands. The different counter anions that were used are bis(trifluoromethanesulfonyl)imide (Tf2 N(-) ), trifluoromethanesulfonate (OTf(-) ) and methanesulfonate (OMs(-) ). Several different N-alkylimidazoles were considered, with the alkyl sidechain ranging in length from methyl to dodecyl. The newly synthesized liquid metal salts were characterized by CHN analysis, FTIR, DSC, TGA and viscosity measurements. An odd-even effect was observed for the melting temperatures and viscosities of the ionic liquids, with the complexes with an even number of carbon atoms in the alkyl chain of the imidazole having a higher melting temperature and a lower viscosity than the complexes with an odd number of carbons. The crystal structures of several of the nickel(II) complexes that are not liquid at room temperature were determined. The electrochemistry of the compounds with the lowest viscosities was investigated. The nickel(II) cation could be reduced but surprisingly no nickel deposits were obtained on the electrode. Instead, nickel nanoparticles were formed at 100 % selectivity, as confirmed by TEM. The magnetic properties of these nanoparticles were investigated by SQUID measurements.
RESUMEN
The synthesis, structural, thermal and electrochemical properties of fluorine-free silver-containing ionic liquids are presented. The ionic liquid cations are formed by a silver(i) ion surrounded by two 1-alkylimidazole ligands, with the counter anions being nitrate ions. Depending on the alkyl chain length, the complexes were found to be liquids at room temperature or melting slightly above this. For the solid compounds it was possible to elucidate the structure by single crystal X-ray analysis. The ionic liquids are electroactive, have good mass transport properties and can be used for the electrodeposition of silver at high current densities. The thermal properties and stability of these compounds were tested by differential scanning calorimetry and thermogravimetric analysis. The viscosity of the ionic liquids follows a Vogel-Tamman-Fulcher relationship as a function of temperature. The electrochemical properties of the complexes were tested by cyclic voltammetry and the resulting electrodeposits were examined using scanning electron microscopy and atomic force microscopy.
RESUMEN
The electrochemical behaviour and deposition of indium in electrolytes composed of 0.4 mol dm-3 In(Tf2N)3 and 0.4 mol dm-3 InCl3 in the solvents 1,2-dimethoxyethane and poly(ethylene glycol) (average molecular mass of 0.400 kg mol-1, PEG400) was investigated. Indium(i) was identified as the intermediate species that disproportionated to indium(iii) and indium(0) nanoparticles. The presence of nanoparticles was verified by TEM analysis. SEM analysis showed that deposits obtained at room temperature from 1,2-dimethoxyethane were rough, while spherical structures were formed in PEG400 at 160 °C.
RESUMEN
Cobalt(ii)-containing ionic liquids were synthesized using N,N-dimethylformamide, N-methylpyrrolidone (NMP), dimethylsulfoxide (DMSO), N,N-dimethylacetamide (DMAc), pyridine-N-oxide (py-O), 1,10-phenanthroline (phen), ethylenediamine (en) and dimethylimidazolidinone (DMI) as ligands. The weakly coordinating bis(trifluoromethylsulfonyl)imide (Tf2N-) was used as a counter anion. Several compounds had a melting temperature below 100 °C, and the compound [Co(DMAc)6][Tf2N]2 was liquid at room temperature, with a viscosity of only 18 mPa s at 80 °C. Several compounds were recrystallized to give high quality single crystals and their crystal structures were determined. EXAFS measurements were performed on [Co(DMAc)6][Tf2N]2 at different temperatures and it was observed that the [Co(DMAc)6]2+ ion partially dissociated at higher temperatures, which explains the temperature-dependent color change (thermochromism). The electrochemical properties of the compounds with the lowest melting points were also investigated. Adherent, crack-free metallic cobalt layers could be electrodeposited from [Co(DMAc)6][Tf2N]2, [Co(DMI)6][Tf2N]2 and [Co(NMP)6][Tf2N]2. From the first two, black deposits consisting of micrometer-sized needles were obtained, whereas the latter resulted in a dull grey cobalt layer consisting of micrometer-sized cobalt spheres. The Co(iii)/Co(ii) redox couple was not found to occur in any compound with an O-donor ligand, but the Co(iii)/Co(ii) redox couple was found to be quasi-reversible for [Co(phen)3][Tf2N]2 dissolved in [BMP][Tf2N].
RESUMEN
Manganese(ii)-containing ionic liquids were synthesized, in which the manganese atoms are coordinated by glymes (diglyme, triglyme, tetraglyme), pyridine-N-oxide, dimethylsulfoxide or N-alkylimidazoles (N-methylimidazole, N-butylimidazole and N-hexylimidazole). As anion, bis(trifluoromethanesulfonyl)imide (bistriflimide, Tf2N-), trifluoromethanesulfonate (triflate, OTf-) or methanesulfonate (mesylate, OMs-) were used. The compounds were characterized by CHN analysis, FTIR, DSC and single-crystal X-ray diffraction measurements. All manganese atoms were six-coordinate. It was found that the glyme-type ligands were replaced by atmospheric water upon leaving the crystals open to the air for several days. The crystal structures of seven compounds were described in detail and the compounds with the lowest melting temperatures were tested as electrolytes for the electrodeposition of manganese (thin) films. An irreversible reduction wave from Mn(ii) to Mn(0) and granular manganese deposits were observed for all compounds, except for liquid manganese salts with N-alkylimidazole ligands and bistriflimide anions, where the electrochemical formation of manganese nanoparticles was observed instead of the deposition of a manganese layer. However, for compounds with the same cation but with a triflate or methanesulfonate anion, manganese metal deposits were obtained, indicating that the nature of the anion has an important effect on the electrochemical properties of liquid metal salts.
RESUMEN
Cobalt(ii)-containing liquid metal salts (LMS) with N-alkylimidazole ligands and bis(trifluoromethanesulfonyl)imide (bistriflimide, Tf2N-) or methanesulfonate (mesylate, OMs-) anions were synthesized and characterized. The chain length of the alkyl side chain on the imidazole ligand was varied. All compounds were characterized using CHN analysis, DSC and FTIR measurements. Single-crystal X-ray diffraction measurements were performed on six of the compounds for which single crystals of good quality could be obtained. All cobalt(ii) centers are six-coordinate with the N-alkylimidazole ligands in an octahedral configuration and the anions are non-coordinating. The same coordination environment was observed by EXAFS measurements on cobalt(ii) liquid metal salts in the liquid state. The electrochemical properties of the compounds with the lowest melting temperatures were investigated using cyclic voltammetry. It was found that part of the current was consumed in the electrodeposition of cobalt, whereas the other part of the current was consumed in the electrochemical formation of cobalt(0) nanoparticles.
RESUMEN
The first redox flow battery (RFB), based on the all-copper liquid metal salt [Cu(MeCN)4][Tf2N], is presented. Liquid metal salts (LMS) are a new type of ionic liquid that functions both as solvent and electrolyte. Non-aqueous electrolytes have advantages over water-based solutions, such as a larger electrochemical window and large thermal stability. The proof-of-concept is given that LMSs can be used as the electrolyte in RFBs. The main advantage of [Cu(MeCN)4][Tf2N] is the high copper concentration, and thus high charge and energy densities of 300 kC l(-1) and 75 W h l(-1) respectively, since the copper(i) ions form an integral part of the electrolyte. A Coulombic efficiency up to 85% could be reached.
RESUMEN
New cationic silver-containing ionic liquids were synthesized and used as non-aqueous electrolytes for the electrodeposition of silver layers. In the liquid state of these ionic liquids, a silver (i) cation is coordinated by pyridine-N-oxide (py-O) ligands in a 1 : 3 metal-to-ligand ratio, although in some cases a different stoichiometry of the silver center crystallized out. As anions, bis(trifluoromethanesulfonyl)imide (Tf2N), trifluoromethanesulfonate (OTf), methanesulfonate (OMs) and nitrate were used, yielding compounds with the formulae [Ag(py-O)3][Tf2N], [Ag(py-O)3][OTf], [Ag(py-O)3][OMs] and [Ag(py-O)3][NO3], respectively. The compounds were characterized by CHN analysis, FTIR, NMR, DSC, TGA and the electrodeposition of silver was investigated by cyclic voltammetry, linear potential scans, scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDX). With the exception of [Ag(py-O)3][Tf2N], which melts at 108 °C, all the silver(i) compounds have a melting point below 80 °C and were tested as electrolytes for silver electrodeposition. Interestingly, very high current densities were observed at a potential of -0.5 V vs. Ag/Ag(+) for the compounds with fluorine-free anions, i.e. [Ag(py-O)3][NO3] (current density of -10 A dm(-2)) and [Ag(py-O)3][OMs] (-6.5 A dm(-2)). The maximum current density of the compound with the fluorinated anion trifluoromethanesulfonate, [Ag(py-O)3][OTf], was much lower: -2.5 A dm(-2) at -0.5 V vs. Ag/Ag(+). Addition of an excess of ligand to [Ag(py-O)3][OTf] resulted in the formation of the room-temperature ionic liquid [Ag(py-O)6][OTf]. A current density of -5 A dm(-2) was observed at -0.5 V vs. Ag/Ag(+) for this low viscous silver salt. The crystal structures of several silver complexes could be determined by X-ray diffraction, and it was found that several of them had a stoichiometry different from the 1 : 3 metal-to-ligand ratio used in their synthesis. This indicates that the compounds form crystals with a composition different from that of the molten state. The electrochemical properties were measured in the liquid state, where the metal-to-ligand ratio was 1 : 3. Single crystal X-ray diffraction measurements showed that silver(i) is six coordinate in [Ag(py-O)3][Tf2N] and [Ag(py-O)3][OTf], while it is five coordinate in the other complexes. In [Ag3(py-O)8][OTf]3, there are two different coordination environments for silver ions: six coordinate central silver ions and five coordinate for the outer silver ions. In some of the silver(i) complexes, silver-silver interactions were observed in the solid state.
RESUMEN
The first palladium-containing Liquid Metal Salts (LMS) are presented and shown to be suitable electrolytes for the electrodeposition of palladium. The homoleptic LMS of formula [Pd(MeIm)4][Tf2N]2 or [Pd(EtIm)4][Tf2N]2 (MeIm = N-methylimidazole, EtIm = N-ethylimidazole) have higher melting points than the heteroleptic [Pd(MeIm)2(EtIm)2][Tf2N]2, which is proved to be the most promising electrolyte. The deposition reaction in these LMS was found to be irreversible but smooth and dense palladium layers can be deposited that are crack-free up to a thickness of 10 microns.