Effects of mulching types on the yield and water utilization by broomcorn millet (Panicum miliaceum): Results of a study in the Loess Plateau, China.

Mulching practices have been widely adopted to improve rainfed crop productivity. However, the major resources including water, heat, and light that influenced the yield of broomcorn millet in different dryland regions have rarely been explored. A three-season field experiment with three mulching practices i.e. traditional planting with non-mulching (TP), ridge-furrow mulching system (RF), and plastic film mulching (PFM) was conducted in three semi-arid regions in the Loess Plateau, China, i.e. Guyuan city (GY), Huining county (HN), and Yulin city (YL) between 2020 and 2022 to investigate the impacts of mulching regimes on soil hydrothermal conditions, agronomic characteristics, leaf photosynthetic properties, broomcorn millet yield, and water use efficiency (WUE). Results showed that both PFM and RF treatments increased soil temperature and moisture, and enhanced dry matter accumulation by promoting leaf photosynthetic capacity and chlorophyll content, thereby improving broomcorn millet yield and WUE. PFM and RF increased the average broomcorn millet yield by 15.08% and 24.86% at GY site, 20.86% and 25.61% at HN site, and 15.75% and 25.57% at YL site, respectively, and increased the average WUE by 16.31% and 27.48% at GY site, 23.21% and 28.80% at HN site, 15.55% and 28.57% at YL site, respectively. Partial least squares path modeling analysis revealed that soil moisture was an important environmental factor in determining broomcorn millet yield. Overall, RF practice can be taken to improve the management of agricultural climate factors and maximize yield, thereby promoting the sustainable development of dryland agriculture in the Loess Plateau.

Sugar conundrum in plant-pathogen interactions: roles of invertase and sugar transporters depend on pathosystems.

It has been increasingly recognized that CWIN (cell wall invertase) and sugar transporters including STP (sugar transport protein) and SWEET (sugar will eventually be exported transporters) play important roles in plant-pathogen interactions. However, the information available in the literature comes from diverse systems and often yields contradictory findings and conclusions. To solve this puzzle, we provide here a comprehensive assessment of the topic. Our analyses revealed that the regulation of plant-microbe interactions by CWIN, SWEET, and STP is conditioned by the specific pathosystems involved. The roles of CWINs in plant resistance are largely determined by the lifestyle of pathogens (biotrophs versus necrotrophs or hemibiotrophs), possibly through CWIN-mediated salicylic acid or jasmonic acid signaling and programmed cell death pathways. The up-regulation of SWEETs and STPs may enhance or reduce plant resistance, depending on the cellular sites from which pathogens acquire sugars from the host cells. Finally, plants employ unique mechanisms to defend against viral infection, in part through a sugar-based regulation of plasmodesmatal development or aperture. Our appraisal further calls for attention to be paid to the involvement of microbial sugar metabolism and transport in plant-pathogen interactions, which is an integrated but overlooked component of such interactions.

Physiology and Molecular Breeding in Sustaining Wheat Grain Setting and Quality under Spring Cold Stress.

Spring cold stress (SCS) compromises the reproductive growth of wheat, being a major constraint in achieving high grain yield and quality in winter wheat. To sustain wheat productivity in SCS conditions, breeding cultivars conferring cold tolerance is key. In this review, we examine how grain setting and quality traits are affected by SCS, which may occur at the pre-anthesis stage. We have investigated the physiological and molecular mechanisms involved in floret and spikelet SCS tolerance. It includes the protective enzymes scavenging reactive oxygen species (ROS), hormonal adjustment, and carbohydrate metabolism. Lastly, we explored quantitative trait loci (QTLs) that regulate SCS for identifying candidate genes for breeding. The existing cultivars for SCS tolerance were primarily bred on agronomic and morphophysiological traits and lacked in molecular investigations. Therefore, breeding novel wheat cultivars based on QTLs and associated genes underlying the fundamental resistance mechanism is urgently needed to sustain grain setting and quality under SCS.

Two decades of functional-structural plant modelling: now addressing fundamental questions in systems biology and predictive ecology.

BACKGROUND: Functional-structural plant models (FSPMs) explore and integrate relationships between a plant's structure and processes that underlie its growth and development. In the last 20 years, scientists interested in functional-structural plant modelling have expanded greatly the range of topics covered and now handle dynamical models of growth and development occurring from the microscopic scale, and involving cell division in plant meristems, to the macroscopic scales of whole plants and plant communities. SCOPE: The FSPM approach occupies a central position in plant science; it is at the crossroads of fundamental questions in systems biology and predictive ecology. This special issue of Annals of Botany features selected papers on critical areas covered by FSPMs and examples of comprehensive models that are used to solve theoretical and applied questions, ranging from developmental biology to plant phenotyping and management of plants for agronomic purposes. Altogether, they offer an opportunity to assess the progress, gaps and bottlenecks along the research path originally foreseen for FSPMs two decades ago. This review also allows discussion of current challenges of FSPMs regarding (1) integration of multidisciplinary knowledge, (2) methods for handling complex models, (3) standards to achieve interoperability and greater genericity and (4) understanding of plant functioning across scales. CONCLUSIONS: This approach has demonstrated considerable progress, but has yet to reach its full potential in terms of integration and heuristic knowledge production. The research agenda of functional-structural plant modellers in the coming years should place a greater emphasis on explaining robust emergent patterns, and on the causes of possible deviation from it. Modelling such patterns could indeed fuel both generic integration across scales and transdisciplinary transfer. In particular, it could be beneficial to emergent fields of research such as model-assisted phenotyping and predictive ecology in managed ecosystems.

Early nodulin 93 protein gene: essential for induction of somatic embryogenesis in oil palm.

KEY MESSAGE: Transcript profiling during the early induction phase of oil palm tissue culture and RNAi studies in a model somatic embryogenesis system showed that EgENOD93 expression is essential for somatic embryogenesis. Micropropagation of oil palm through tissue culture is vital for the generation of superior and uniform elite planting materials. Studies were carried out to identify genes to distinguish between leaf explants with the potential to develop into embryogenic or non-embryogenic callus. Oil palm cDNA microarrays were co-hybridized with cDNA probes of reference tissue, separately with embryo forming (media T527) and non-embryo (media T694) forming leaf explants sampled at Day 7, Day 14 and Day 21. Analysis of the normalized datasets has identified 77, 115 and 127 significantly differentially expressed genes at Day 7, Day 14, and Day 21, respectively. An early nodulin 93 protein gene (ENOD93), was highly expressed at Day 7, Day 14, and Day 21 and in callus (media T527), as assessed by RT-qPCR. Validation of EgENOD93 across tissue culture lines of different genetic background and media composition showed the potential of this gene as an embryogenic marker. In situ RNA hybridization and functional characterization in Medicago truncatula provided additional evidence that ENOD93 is essential for somatic embryogenesis. This study supports the suitability of EgENOD93 as a marker to predict the potential of leaf explants to produce embryogenic callus. Crosstalk among stresses, auxin, and Nod-factor like signalling molecules likely induces the expression of EgENOD93 for embryogenic callus formation.

TBC2health: a database of experimentally validated health-beneficial effects of tea bioactive compounds.

Tea is one of the most consumed beverages in the world. Considerable studies show the exceptional health benefits (e.g. antioxidation, cancer prevention) of tea owing to its various bioactive components. However, data from these extensively published papers had not been made available in a central database. To lay a foundation in improving the understanding of healthy tea functions, we established a TBC2health database that currently documents 1338 relationships between 497 tea bioactive compounds and 206 diseases (or phenotypes) manually culled from over 300 published articles. Each entry in TBC2health contains comprehensive information about a bioactive relationship that can be accessed in three aspects: (i) compound information, (ii) disease (or phenotype) information and (iii) evidence and reference. Using the curated bioactive relationships, a bipartite network was reconstructed and the corresponding network (or sub-network) visualization and topological analyses are provided for users. This database has a user-friendly interface for entry browse, search and download. In addition, TBC2health provides a submission page and several useful tools (e.g. BLAST, molecular docking) to facilitate use of the database. Consequently, TBC2health can serve as a valuable bioinformatics platform for the exploration of beneficial effects of tea on human health. TBC2health is freely available at http://camellia.ahau.edu.cn/TBC2health.

Oil body biogenesis and biotechnology in legume seeds.

The seeds of many legume species including soybean, Pongamia pinnata and the model legume Medicago truncatula store considerable oil, apart from protein, in their cotyledons. However, as a group, legume storage strategies are quite variable and provide opportunities for better understanding of carbon partitioning into different storage products. Legumes with their ability to fix nitrogen can also increase the sustainability of agricultural systems. This review integrates the cell biology, biochemistry and molecular biology of oil body biogenesis before considering biotechnology strategies to enhance oil body biosynthesis. Cellular aspects of packaging triacylglycerol (TAG) into oil bodies are emphasized. Enhancing seed oil content has successfully focused on the up-regulation of the TAG biosynthesis pathways using overexpression of enzymes such as diacylglycerol acyltransferase1 and transcription factors such as WRINKLE1 and LEAFY COTYLEDON1. While these strategies are central, decreasing carbon flow into other storage products and maximizing the packaging of oil bodies into the cytoplasm are other strategies that need further examination. Overall there is much potential for integrating carbon partitioning, up-regulation of fatty acid and TAG synthesis and oil body packaging, for enhancing oil levels. In addition to the potential for integrated strategies to improving oil yields, the capacity to modify fatty acid composition and use of oil bodies as platforms for the production of recombinant proteins in seed of transgenic legumes provide other opportunities for legume biotechnology.

Topological characteristics of target genes regulated by abiotic-stress-responsible miRNAs in a rice interactome network.

A great number of microRNAs (miRNAs) have been identified in responding and acting in gene regulatory networks associated with plant tolerance to abiotic stress conditions, such as drought, salinity, and high temperature. The topological exploration of target genes regulated by abiotic-stress-responsible miRNAs (ASRmiRs) in a network facilitates to discover the molecular basis of plant abiotic stress response. This study was based on the staple food rice (Oryza sativa) in which ASRmiRs were manually curated. After having compared the topological properties of target genes (stress-miR-targets) with those (non-stress-miR-targets) not regulated by ASRmiRs in a rice interactome network, we found that stress-miR-targets exhibited distinguishable topological properties. The interaction probability analysis and k-core decomposition showed that stress-miR-targets preferentially interacted with non-stress-miR-targets and located at the peripheral positions in the network. Our results indicated an obvious topological distinction between the two types of genes, reflecting the specific mechanisms of action of stress-miR-targets in rice abiotic stress response. Also, the results may provide valuable clues to elucidate molecular mechanisms of crop response to abiotic stress.

Transcriptional regulation of early embryo development in the model legume Medicago truncatula.

Cultivated legumes account for more than a quarter of primary crop production worldwide. The protein- and oil-rich seed of cultivated legumes provides around one-third of the protein in the average human diet, with soybeans (Glycine max (L.) Merr) being the single largest source of vegetable oil. Despite their critical importance to human and animal nutrition, we lack an understanding of how early seed development in legumes is orchestrated at the transcriptional level. We developed a method to isolate ovules from the model legume, Medicago truncatula Gaertn, at specific stages of embryogenesis, on the basis of flower and pod morphology. Using these isolated ovules we profiled the expression of candidate homeobox, AP2 domain and B3 domain-containing transcription factors. These genes were identified by available information and sequence homology, and five distinctive patterns of transcription were found that correlated with specific stages of early seed growth and development. Co-expression of some genes could be related to common regulatory sequences in the promoter or 3'-UTR regions. These expression patterns were also related to the expression of B3-domain transcription factors important in seed filling (MtFUS3-like and MtABI3-like). Localisation of gene expression by promoter-GUS fusions or in situ hybridisation aided understanding of the role of the transcription factors. This study provides a framework to enhance the understanding of the integrated transcriptional regulation of legume embryo growth and development and seed filling.

Developmental and growth controls of tillering and water-soluble carbohydrate accumulation in contrasting wheat (Triticum aestivum L.) genotypes: can we dissect them?

In wheat, tillering and water-soluble carbohydrates (WSCs) in the stem are potential traits for adaptation to different environments and are of interest as targets for selective breeding. This study investigated the observation that a high stem WSC concentration (WSCc) is often related to low tillering. The proposition tested was that stem WSC accumulation is plant density dependent and could be an emergent property of tillering, whether driven by genotype or by environment. A small subset of recombinant inbred lines (RILs) contrasting for tillering was grown at different plant densities or on different sowing dates in multiple field experiments. Both tillering and WSCc were highly influenced by the environment, with a smaller, distinct genotypic component; the genotype × environment range covered 350-750 stems m(-2) and 25-210 mg g(-1) WSCc. Stem WSCc was inversely related to stem number m(-2), but genotypic rankings for stem WSCc persisted when RILs were compared at similar stem density. Low tillering-high WSCc RILs had similar leaf area index, larger individual leaves, and stems with larger internode cross-section and wall area when compared with high tillering-low WSCc RILs. The maximum number of stems per plant was positively associated with growth and relative growth rate per plant, tillering rate and duration, and also, in some treatments, with leaf appearance rate and final leaf number. A common threshold of the red:far red ratio (0.39-0.44; standard error of the difference=0.055) coincided with the maximum stem number per plant across genotypes and plant densities, and could be effectively used in crop simulation modelling as a 'cut-off' rule for tillering. The relationship between tillering, WSCc, and their component traits, as well as the possible implications for crop simulation and breeding, is discussed.

Improving wheat seedling quality through deep ploughing and soil compaction at sowing in lime concretion black soil.

The straw incorporation in lime concretion black soil compromises the emergence and quality of winter wheat seedlings in Huaibei Plain, China, lowering the potential of wheat productivity. To overcome the disadvantage, a two-year field experiment was conducted in 2017-18 and 2018-19 to investigate the effects of different tillage modes on seedling emergence and subsequent seedling growth, and final grain yield (GY) in winter wheat. The modes are rotary tillage with compaction after sowing (RCT), rotary tillage after deep ploughing (PT) and rotary tillage after deep ploughing with compaction after sowing (PCT), with the traditional rotary tillage (RT) method as the control. Compared to RT, greater soil moisture content (SMC) at the seedling stage was observed in deep ploughing or compaction treatment, and the highest SMC was achieved in PCT; the time of reaching the maximum number of seedlings was 1 d sooner in RCT or PT, and 3 d in PCT; the seedling number in RCT, PT and PCT was significantly increased by 32.6%, 34.5% and 61.5% respectively. The population size, shoot and root growth of winter wheat in ploughing mode was significantly enhanced than that of rotary treatment at the over-wintering stage; compared to no compaction after sowing, plant growth in compaction treatments was significantly promoted with greater plant population size and height of seedlings. At harvest, GY in RCT, PT and PCT was significantly improved by 5.87%, 10.8% and 16.4%, respectively, compared to RT and the highest GY was achieved in PCT by up to 8, 350.1 kg ha-1 due to the increased spike number. In conclusion, the seedling quality in the straw incorporation practice was improved through rotary after deep ploughing and compaction after sowing for lime concretion black soil in Huaibei Plain, China or a similar soil type.

Characteristics of historical precipitation for winter wheat cropping in the semi-arid and semi-humid area.

Winter wheat (Triticum aestivum L.) is one of major crops in the area along Huai river, China where it is a semi-arid and semi-humid region with sufficient precipitation for an entire season, but with uneven distribution within various growth stages. The instability of precipitation is an important factor in limiting wheat production potential under climate change. Therefore, it is essential to characterise the precipitation associated with different crop developmental stages. Based on climate data from 1999 to 2020 in six representative meteorological stations, we characterised the historical precipitation relating to seven key growth stages in winter wheat. There is no clear trend of interannual variation of precipitation for wheat season, with an average of precipitation of 414.4 ± 121.2 mm. In terms of the distribution of precipitation grade within a season, light rain was dominant. Continuous rain occurred frequently during the pre-winter seedling and overwintering stages. The critical period of water demand, such as jointing and booting, has less precipitation. The fluctuation range of precipitation in sowing, heading-filling and maturation stages is large, which means that there is flood and drought at times. In conclusion, these findings provide a foundation for instructing winter wheat cropping in confronting with waterlogging and drought risk due to uneven precipitation in 'Yanhuai' region, China.

Crop/Plant Modeling Supports Plant Breeding: II. Guidance of Functional Plant Phenotyping for Trait Discovery.

Observable morphological traits are widely employed in plant phenotyping for breeding use, which are often the external phenotypes driven by a chain of functional actions in plants. Identifying and phenotyping inherently functional traits for crop improvement toward high yields or adaptation to harsh environments remains a major challenge. Prediction of whole-plant performance in functional-structural plant models (FSPMs) is driven by plant growth algorithms based on organ scale wrapped up with micro-environments. In particular, the models are flexible for scaling down or up through specific functions at the organ nexus, allowing the prediction of crop system behaviors from the genome to the field. As such, by virtue of FSPMs, model parameters that determine organogenesis, development, biomass production, allocation, and morphogenesis from a molecular to the whole plant level can be profiled systematically and made readily available for phenotyping. FSPMs can provide rich functional traits representing biological regulatory mechanisms at various scales in a dynamic system, e.g., Rubisco carboxylation rate, mesophyll conductance, specific leaf nitrogen, radiation use efficiency, and source-sink ratio apart from morphological traits. High-throughput phenotyping such traits is also discussed, which provides an unprecedented opportunity to evolve FSPMs. This will accelerate the co-evolution of FSPMs and plant phenomics, and thus improving breeding efficiency. To expand the great promise of FSPMs in crop science, FSPMs still need more effort in multiscale, mechanistic, reproductive organ, and root system modeling. In summary, this study demonstrates that FSPMs are invaluable tools in guiding functional trait phenotyping at various scales and can thus provide abundant functional targets for phenotyping toward crop improvement.

Effects of Spraying KH2PO4 on Flag Leaf Physiological Characteristics and Grain Yield and Quality under Heat Stress during the Filling Period in Winter Wheat.

As one of the most important wheat-producing areas in China, wheat is prone to heat stress during the grain filling period in the Huang-Huai-Hai Plain (3HP), which lowers yields and degrades the grain quality of wheat. To assess the effects of spraying potassium dihydrogen phosphate (KH2PO4) on the physiological traits in flag leaves and grain yield (GY) and quality under heat stress during the filling period, we conducted a two-year field experiment in the winter wheat growing seasons of 2020-2022. In this study, spraying water combined with heat stress (HT), 0.3% KH2PO4 (KDP), and 0.3% KH2PO4 combined with heat stress (PHT) were designed, and spraying water alone was used as a control (CK). The dates for the spraying were the third and eleventh day after anthesis, and a plastic film shed was used to impose heat stress on the wheat plants during the grain filling period. The results showed that spraying KH2PO4 significantly improved the chlorophyll content and net photosynthesis rate (Pn) in flag leaves compared with the non-sprayed treatments. Compared with CK, the Pn in HT decreased by 8.97% after heat stress, while Pn in PHT decreased by 7.44% compared to that of KDP. The activities of superoxide dismutase, catalase, and peroxidase in flag leaves were significantly reduced when the wheat was subjected to heat stress, while malonaldehyde content increased, and the enzyme activities were significantly enhanced when KH2PO4 was sprayed. Heat stress significantly decreased the contribution rate of dry matter accumulation (DM) after anthesis of wheat to grain (CRAA), whereas spraying KH2PO4 significantly increased the CRAA and harvest index. At maturity, the DM in CK was significantly higher than that in HT, KDP was significantly higher than PHT, and KDP had the highest DM. Compared with CK, the GY in KDP significantly increased by 9.85% over the two years, while the GY in HT decreased by 11.44% compared with that of CK, and the GY in PHT decreased by 6.31% compared to that of KDP. Spraying KH2PO4 after anthesis primarily helped GY by maintaining a high thousand grain weight to lessen the negative effects of heat stress on wheat. Moreover, heat stress significantly reduced protein concentration, wet gluten content, dough development time, and hardness index in grains of mature, while spraying KH2PO4 maintained a sufficient grain quality under the conditions of achieving higher yields. Overall, spraying KH2PO4 after anthesis could enhance the heat stress resistance of wheat and maintain the photosynthetic capacity of flag leaves, ensuring the dry matter production and reducing the negative effects on grain yield and quality in the 3HP.

Securing maize reproductive success under drought stress by harnessing CO2 fertilization for greater productivity.

Securing maize grain yield is crucial to meet food and energy needs for the future growing population, especially under frequent drought events and elevated CO2 (eCO2) due to climate change. To maximize the kernel setting rate under drought stress is a key strategy in battling against the negative impacts. Firstly, we summarize the major limitations to leaf source and kernel sink in maize under drought stress, and identified that loss in grain yield is mainly attributed to reduced kernel set. Reproductive drought tolerance can be realized by collective contribution with a greater assimilate import into ear, more available sugars for ovary and silk use, and higher capacity to remobilize assimilate reserve. As such, utilization of CO2 fertilization by improved photosynthesis and greater reserve remobilization is a key strategy for coping with drought stress under climate change condition. We propose that optimizing planting methods and mining natural genetic variation still need to be done continuously, meanwhile, by virtue of advanced genetic engineering and plant phenomics tools, the breeding program of higher photosynthetic efficiency maize varieties adapted to eCO2 can be accelerated. Consequently, stabilizing maize production under drought stress can be achieved by securing reproductive success by harnessing CO2 fertilization.

Crop/Plant Modeling Supports Plant Breeding: I. Optimization of Environmental Factors in Accelerating Crop Growth and Development for Speed Breeding.

The environmental conditions in customered speed breeding practice are, to some extent, empirical and, thus, can be further optimized. Crop and plant models have been developed as powerful tools in predicting growth and development under various environments for extensive crop species. To improve speed breeding, crop models can be used to predict the phenotypes resulted from genotype by environment by management at the population level, while plant models can be used to examine 3-dimensional plant architectural development by microenvironments at the organ level. By justifying the simulations via numerous virtual trials using models in testing genotype × environment × management, an optimized combination of environmental factors in achieving desired plant phenotypes can be quickly determined. Artificial intelligence in assisting for optimization is also discussed. We admit that the appropriate modifications on modeling algorithms or adding new modules may be necessary in optimizing speed breeding for specific uses. Overall, this review demonstrates that crop and plant models are promising tools in providing the optimized combinations of environment factors in advancing crop growth and development for speed breeding.

From embryo sac to oil and protein bodies: embryo development in the model legume Medicago truncatula.

• The cell and developmental biology of zygotic embryogenesis in the model legume Medicago truncatula has received little attention. We studied M. truncatula embryogenesis from embryo sac until cotyledon maturation, including oil and protein body biogenesis. • We characterized embryo development using light and electron microscopy, measurement of protein and lipid fatty acid accumulation and by profiling the expression of key seed storage genes. • Embryo sac development in M. truncatula is of the Polygonum type. A distinctive multicellular hypophysis and suspensor develops before the globular stage and by the early cotyledon stage, the procambium connects the developing apical meristems. In the storage parenchyma of cotyledons, ovoid oil bodies surround protein bodies and the plasma membrane. Four major lipid fatty acids accumulate as cotyledons develop, paralleling the expression of OLEOSIN and the storage protein genes, VICILIN and LEGUMIN. • Zygotic embryogenesis in M. truncatula features the development of a distinctive multicellular hypophysis and an endopolyploid suspensor with basal transfer cell. A clear procambial connection between the apical meristems is evident and there is a characteristic arrangement of oil bodies in the cotyledons and radicle. Our data help link embryogenesis to the genetic regulation of oil and protein body biogenesis in legume seed.

Overcoming Reproductive Compromise Under Heat Stress in Wheat: Physiological and Genetic Regulation, and Breeding Strategy.

The reproductive compromise under heat stress is a major obstacle to achieve high grain yield and quality in wheat worldwide. Securing reproductive success is the key solution to sustain wheat productivity by understanding the physiological mechanism and molecular basis in conferring heat tolerance and utilizing the candidate gene resources for breeding. In this study, we examined the performance on both carbon supply source (as leaf photosynthetic rate) and carbon sink intake (as grain yields and quality) in wheat under heat stress varying with timing, duration, and intensity, and we further surveyed physiological processes from source to sink and the associated genetic basis in regulating reproductive thermotolerance; in addition, we summarized the quantitative trait loci (QTLs) and genes identified for heat stress tolerance associated with reproductive stages. Discovery of novel genes for thermotolerance is made more efficient via the combination of transcriptomics, proteomics, metabolomics, and phenomics. Gene editing of specific genes for novel varieties governing heat tolerance is also discussed.

Absorption and translocation of nitrogen in rhizomes of Leymus chinensis.

Leymus chinensis is a dominant species in the Inner Mongolia steppe, northern China. Plant growth in northern China grassland is often limited by low soil nitrogen availability. The objective of this study is to investigate whether rhizomes of Leymus chinensis are involved in the contribution of N uptake. The N concentration, (15)N concentration and (15)N proportion in roots, rhizomes and shoots after 48 h exposure of roots (L(root)) and rhizomes (L(rhizo)) separately and roots and rhizomes together (L(r+r)) to 0.1 mM (15)NH (4)(15)NO(3) solution were measured using root-splitting equipment and stable isotope ((15)N) techniques, respectively. The N content and dry mass were not affected by the labeling treatment. In contrast, the (15)N concentration in shoots, rhizomes and roots was significantly increased by the labeling in rhizomes, indicating that the inorganic nitrogen was absorbed via rhizomes from the solution and can be transported to other tissues, with preference to shoots rather than roots. Meanwhile, the absolute N absorption and translocation among compartments were also calculated. The N absorption via rhizomes was much smaller than via roots; however, the uptake efficiency per surface unit via rhizomes was greater than via roots. The capacity and high efficiency to absorb N nutrient via rhizomes enable plants to use transient nutrient supplies in the top soil surface.

Functional-Structural Plant Models Mission in Advancing Crop Science: Opportunities and Prospects.

Functional-structural plant models (FSPMs) have been evolving for over 2 decades and their future development, to some extent, depends on the value of potential applications in crop science. To date, stabilizing crop production by identifying valuable traits for novel cultivars adapted to adverse environments is topical in crop science. Thus, this study will examine how FSPMs are able to address new challenges in crop science for sustainable crop production. FSPMs developed to simulate organogenesis, morphogenesis, and physiological activities under various environments and are amenable to downscale to the tissue, cellular, and molecular level or upscale to the whole plant and ecological level. In a modeling framework with independent and interactive modules, advanced algorithms provide morphophysiological details at various scales. FSPMs are shown to be able to: (i) provide crop ideotypes efficiently for optimizing the resource distribution and use for greater productivity and less disease risk, (ii) guide molecular design breeding via linking molecular basis to plant phenotypes as well as enrich crop models with an additional architectural dimension to assist breeding, and (iii) interact with plant phenotyping for molecular breeding in embracing three-dimensional (3D) architectural traits. This study illustrates that FSPMs have great prospects in speeding up precision breeding for specific environments due to the capacity for guiding and integrating ideotypes, phenotyping, molecular design, and linking molecular basis to target phenotypes. Consequently, the promising great applications of FSPMs in crop science will, in turn, accelerate their evolution and vice versa.