RESUMEN
Connectivity in metallic nanowire networks with resistive junctions is manipulated by applying an electric field to create materials with tunable electrical conductivity. In situ electron microscope and electrical measurements visualize the activation and evolution of connectivity within these networks. Modeling nanowire networks, having a distribution of junction breakdown voltages, reveals universal scaling behavior applicable to all network materials. We demonstrate how local connectivity within these networks can be programmed and discuss material and device applications.
Asunto(s)
Nanopartículas del Metal/química , Metales/química , Nanotecnología/métodos , Nanocables/química , Conductividad Eléctrica , Electricidad , Humanos , Luz , Campos Magnéticos , Ensayo de Materiales , Modelos Estadísticos , Electricidad Estática , Ingeniería de Tejidos/métodosRESUMEN
We have characterized the optoelectrical properties of networks of silver nanowires as a function of nanowire dimension by measuring transmittance (T) and sheet resistance (R(s)) for a large number of networks of different thicknesses fabricated from wires of different diameters (D) and lengths (L). We have analysed these data using both bulk-like and percolative models. We find the network DC conductivity to scale linearly with wire length while the optical conductivity is approximately invariant with nanowire length. The ratio of DC to optical conductivity, often taken as a figure of merit for transparent conductors, scales approximately as L/D. Interestingly, the percolative exponent, n, scales empirically as D², while the percolative figure of merit, Π, displays large values at low D. As high T and low R(s) are associated with low n and high Π, these data are consistent with improved optoelectrical performance for networks of low-D wires. We predict that networks of wires with D = 25 nm could give sheet resistance as low as 25 Ω/â¡ for T = 90%.
RESUMEN
We have developed methods to disperse and partially size separate NbSe(3) nanowires in aqueous surfactant solutions. These dispersions can easily be formed into thin films. Optical and electrical studies show these films to display sheet resistances and transmittances ranging from (460 Ω/â¡, 22%) to (12 kΩ/â¡, 79%) depending on thickness. For thicker films, we measured the transparent conducting figure of merit to be σ(DC, B)/σ(Op) = 0.32, similar to graphene networks. Thickness measurements gave individual values of σ(Op) = 17,800 S m(-1) and σ(DC, B) = 5700 S m(-1). Films thinner than â¼ 70 nm displayed reduced DC conductivity due to percolative effects.
RESUMEN
Transparent heaters are important for many applications and in the future are likely to be fabricated from thin, conducting, nanostructured networks. However, the electrical properties of such networks are almost always controlled by percolative effects. The impact of percolation on heating effects has not been considered, and the material parameter combinations that lead to efficient performance are not known. In fact, figures of merit for transparent heaters have not been elucidated, either in bulk-like or percolative systems. Here, we develop a simple yet comprehensive model describing the operation of transparent heaters. By considering the balance of Joule heating versus power dissipated by both convection and radiation, we derive an expression for the time-dependent heater temperature as a function of both electrical and thermal parameters. This equation can be modified to describe the relationship between temperature, optical transmittance, and electrical/thermal parameters in both bulk-like and percolative systems. By performing experiments on silver nanowire networks, systems known to display both bulk-like and percolative regimes, we show the model to describe real systems extremely well. This work shows the performance of transparent heaters in the percolative regime to be significantly less efficient compared to the bulk-like regime, implying the diameter of the nanowires making up the network to be critical. The model allows the identification of figures of merit for networks in both bulk-like and percolative regimes. We show that metallic nanowire networks are most promising, closely followed by CVD graphene, with networks of solution-processed graphene and carbon nanotubes being much less efficient.
RESUMEN
We have prepared flexible, transparent, and very conducting thin composite films from poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate), filled with both arc discharge and HIPCO single-walled nanotubes, at high loading level. The films are of high optical uniformity. The arc discharge nanotube-filled composites were significantly more conductive, demonstrating DC conductivities of >10(5) S/m for mass fractions >50 wt %. The ratio of DC to optical conductivity was higher for composites with mass fractions of 55-60 wt % than for nanotube-only films. For an 80 nm thick composite, filled with 60 wt % arc discharge nanotubes, this conductivity ratio was maximized at sigma(DC)/sigma(Op) = 15. This translates into transmittance (550 nm) and sheet resistance of 75 and 80 Omega/square, respectively. These composites were electromechanically very stable, showing <1% resistance change over 130 bend cycles.