RESUMEN
Monitoring chemotherapeutic drugs in biological fluids is, in many cases, extremely important for dose adjustment, the maintenance of therapies, and the control of side effects. In this work, a method for determining the doxorubicin in saliva by digital image analysis (DIA) was optimised and validated. Images from a paper point were obtained using a conventional and cheap flatbed scanner at a 600 ppp resolution. The RGB data channels were obtained from the images in a region of 15 × 15 pixels around the sorbent vertex. The paper point was used as sorbent material in sample preparation using a multiphase electroextraction system. Following optimisation using a Doehlert experimental design, the method was able to simultaneously extract 66 samples in 20 min. The high selectivity of the electric field associated with the sorption capacity of the cellulosic material allowed the chemotherapy drug to be pre-concentrated and quantified in a range between 50 and 500 µg L-1 (R2 > 0.98). The method also exhibited adequate parameters (limits of detection and quantification, recovery, and precision) indicating its potential application in the monitoring of doxorubicin and similar drugs in saliva.
Asunto(s)
Doxorrubicina , SalivaRESUMEN
The ruptures of tailings mine dams in the cities of Mariana and Brumadinho contaminated local Brazilian Rivers with toxic metals. Herein, we describe a scaled-up biosorbent based on natural macauba endocarp (NTE) and macauba endocarp chemically treated (TE) to remove Al3+, Mn2+ and Fe3+ from aqueous solutions. For the TE material: the variation of pH and temperature of water did not cause significant sorption interferences; the kinetics studies suggest a pseudo-second-order model; the adsorption isotherms revealed that the Langmuir equation was the best fit for Al3+ and Mn2+, while the Freundlich equation best described the Fe3+; and the maximum adsorption capacities were between 0.268 mg g-1 and 1.379 mg g-1. A scaled-up was carried out using an adsorption column to remove the metals from Rio Paraopeba River water samples and the results showed that both NTE and TE are potentially low cost biosorbents for removing Al3+, Mn2+ and Fe3+.
RESUMEN
A porous and hydrophilic sorbent material was used in an extraction system, assisted by electric fields, for the extraction of cocaine in saliva and subsequent determination by ultra-high-performance liquid chromatography associated with sequential triple quadrupole mass spectrometry (UHPLC-MS/MS). The cellulose-based material was characterized by scanning electron microscopy, infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction. The time and voltage variables applied in the extraction process were investigated through a Doehlert experimental design, and with the best conditions found (35min and 300â¯V) some validation parameters were evaluated. The established working range was 1-100⯵gâ¯L-1 (R2â¯>â¯0.99), and the detection and quantification limits determined were 0.3 and 0.8⯵gâ¯L-1, respectively. Recoveries from 80 to 115% and coefficient of variation ≤15 and 16% for intra-day and inter-day assays, respectively, were obtained for sample concentrations of LOQ, 5, 25, and 75⯵gâ¯L-1, indicating satisfactory accuracy and precision for the proposed method. In addition, the method presented no matrix effect, and the extraction efficiency was between 56 and 70%. The results showed that the material used has adequate physicochemical characteristics and can be applied as a sorbent and electrolyte support in multiphase extractions using electric fields.
Asunto(s)
Celulosa/química , Cromatografía Líquida de Alta Presión/métodos , Cocaína/análisis , Cocaína/aislamiento & purificación , Saliva/metabolismo , Extracción en Fase Sólida/métodos , Espectrometría de Masas en Tándem/métodos , Fenómenos Electromagnéticos , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Saliva/química , Saliva Artificial/química , Saliva Artificial/metabolismo , Extracción en Fase Sólida/instrumentaciónRESUMEN
The rare earth elements (REE) composition in Fe-mineral phases is an important tool in iron formation studies to obtain information about parent rocks and environmental and paragenetic processes. However, the determination of REE presents some difficulties, such as the low concentration of these elements, matrix complexity and lack of iron matrix certified reference materials. The aim of the present work is to propose an analytical method to determine the REE plus Y (REE + Y) contents at trace levels in Fe-(hydr)oxides by the laser ablation ICP-quadrupoleMS technique, using external calibration. The calibration curves were obtained from analyses of reference materials with different matrices, and the analytical conditions were checked on the NIST 614 glass. The linearity (R2 ≥ 0.98), limit of detection (0.002-0.044 µg g-1), limit of quantification (0.008-0.146 µg g-1), recovery (88.4-112.4%), and intraday (0.1-14.1%) and interday (1.6-17.8%) precision were systematically assessed. The results obtained showed that the method is fit for the purpose and showed evidence of a nonsignificant interference of the matrix. Thus, the developed procedure was applied in the analyses of magnetite, martite, hematite, and goethite grains from Cauê Iron Formation (Brazil). The REE + Y patterns of the minerals are consistent with the previous study of bulk analyses on whole rocks and highlight the postdepositional signature of these elements in banded iron formations.