RESUMEN
This work reports on the use of protein engineering as a versatile tool to rationally design metal-binding proteins for the synthesis of highly photoluminescent protein-stabilized gold nanoclusters (Prot-AuNCs). The use of a single repeat protein scaffold allowed the incorporation of a set of designed metal-binding sites to understand the effect of the metal-coordinating residues and the protein environment on the photoluminescent (PL) properties of gold nanoclusters (AuNCs). The resulting Prot-AuNCs, synthesized by two sustainable procedures, showed size-tunable color emission and outstanding PL properties. In a second stage, tryptophan (Trp) residues were introduced at specific positions to provide an electron-rich protein environment and favor energy transfer from Trps to AuNCs. This modification resulted in improved PL properties relevant for future applications in sensing, biological labeling, catalysis, and optics.
Asunto(s)
Oro , Nanopartículas del Metal , Catálisis , Transferencia de Energía , Oro/química , Nanopartículas del Metal/química , Ingeniería de ProteínasRESUMEN
Luminescent metal-organic frameworks (LMOFs) are promising materials for lighting and sensing applications. Herein, exposure of the highly luminescent Zn2(bpdc)2(bpee) MOF (H2bpdc = 4,4'-biphenyldicarboxylic acid and bpee = 1,2-bipyridylethene) to subppm amine contents turns on a new absorption band unambiguously ascribed to free bpee molecules concomitant with the gradual appearance of a new photoluminescence band at shorter wavelengths. These findings combined with Fourier-transform infrared spectra, powder X-ray diffraction and thermogravimetric analysis of exposed LMOF powders confirm that bpee ligands are exchanged by amines and released inside the LMOF, triggering absorption and luminescence features which can be exploited for highly sensitive amine recognition. This principle was demonstrated in mixed matrix membranes (MMMs) prepared by a simple solvent-free method consisting of mixing Zn2(bpdc)2(bpee) with dimethylvinyl-terminated dimethylsiloxane and dimethylhydrogen siloxane. This method enabled the production of free-standing, permeable, and highly transparent MMMs which showed enormous potential and sensitivity to the detection of amines in gas phase and aqueous medium.
RESUMEN
We report on the theoretical and experimental studies of the new dye-sensitized solar cells functionalized with 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin zinc(II) complexes bearing 2- and 8-bromo substituents at the ß positions. In agreement with the results of TD-DFT calculations, the absorption maxima of di- and octa-brominated Zn(II) complexes, ZnTCPPBr2 and ZnTCPPBr8, exhibited large red-shift compared to that of the non-brominated free base porphyrin (H2TCPP). Furthermore, DFT calculations showed that the higher stabilization of the LUMO levels relative to the HOMO ones makes the HOMO-LUMO gap of the brominated Zn-porphyrins models smaller compared to that of the nonbrominated counterparts, which explains the red shifts of the Soret and Q bands of the brominated compounds. Solar cells containing the new saddle-shaped Zn(II) porphyrins were subjected to analysis in a photovoltaic calibration laboratory to determine their solar to electric energy conversion. In this regard, we found that the overall conversion efficiency of ZnTCPPBr8 adsorbed on TiO2 nanocrystalline films was 5 times as large as that of ZnTCPPBr2 adsorbed on the same films. The effect of the increasing number of Br groups on the photovoltaic performance of the complexes was compared to the results of computational methods using ab initio DFT molecular dynamics simulations and quantum dynamics calculations of electronic relaxation to investigate the interfacial electron transfer (IET) in TCPPBrx/TiO2-anatase nanostructures. Better IET in ZnTCPPBr8 compared to ZnTCPPBr2, and in H2TCPP was evaluated from interfacial electron transfer (IET) simulations. The IET results indicate that electron injection in ZnTCPPBr8-TiO2 (τ = 25 fs) can be up to 5 orders of magnitude faster than ZnTCPPBr2-TiO2 (τ = 125 fs). Both experimental and theoretical results demonstrate that the increase of the number of bromo-substituents at the ß-pyrrole positions of the porphyrin macrocycle created a new class of porphyrin-based DSSC, which exhibits a remarkable increase in the photovoltaic performance compared to non-brominated porphyrins.
RESUMEN
Three novel deep-red to near-infrared (DR to NIR) emitters based on mononuclear and dinuclear ruthenium(II) complexes with bulky structures were presented herein. For the first time, the unusual effects of metal coordination mode on the electroluminescence properties of a binuclear emitter were investigated. Unexpectedly, the mononuclear complexes showed superior performance in deep-red light-emitting electrochemical cells (DR-LEC) compared to the dinuclear complex. Likewise, substituting various ancillary ligands improved the radiance and lifetime of devices by 2.5 and 1.5 times, respectively. To the best of our knowledge, the obtained efficiency is among the best reported to date for DR-LECs based on ruthenium polypyridyl complexes.
RESUMEN
The reactions of a zirconium salt with 1,2,4,5-benzenetetracarboxylate (btec), bathophenanthroline (Bphen) and thiocyanate ions were synthesized and studied by changing the mole ratio, the order of reactant and their pH. It is found that the coordination mode of btec acid depends on the control of reaction conditions. Monodentate, bidentate and bridging modes were investigated by FT-IR spectroscopy. The structures of Zr(btec) and Zr(btec)(Bphen) complexes were also characterized by UV-Vis, CHN, ICP-AES, (1)H NMR and cyclic voltammetry. The role of Bphen ligand in the photopysical properties of Zr(btec)(Bphen) complexes was investigated by DFT calculation. The photoluminescence (PL) emission of nine Zr(btec) complexes that have two peaks, a sharp and intense band for the first peak from 320 to 430 nm in comparison to the second peak with a less intensity and broadened in the regions of 650-780 nm. PL spectra of twelve Zr(btec)(Bphen) complexes also showed bands at 450, 550, 625 nm. LED devices with Zr complex as emitter layer and the structure ITO/PEDOT:PSS/PVK:PBD/zirconium complex/Al emitted a broad band centered at 550 and 650 originating from the Zr complexes. The EL spectra of Zr(btec) and Zr(btec)(Bphen) complexes indicated a long red shift rather than PVK:PBD blend. We believe that the electroplex occurring at PVK-Zr complexes interface is responsible for the green-red emission in the EL of the device. These observations suggest an important role for the Bphen ligand to improve EL performance.
RESUMEN
Light-emitting electrochemical cells (LECs) based on Ir(III) complexes owing to the superior advantages exhibit high potential for display and lighting applications. Herein, a series of Ir(III) complexes based on phenanthroimidazole (PI) as an ancillary ligand were synthesized to achieve efficient and highly stable yellow-to-orange LEC devices with fast response. These complexes exhibit appropriate electrochemical stability and significant suppression of concentration quenching in the thin films compared to the archetype complex. The fabricated LECs showed remarkably long device lifetimes over 1400 and 2100 h and external quantum efficiency of 2 and 3% for yellow and orange-LECs, respectively. The obtained t1/2 for yellow LEC is much higher than archetype [Ir(ppy)2(phen)]+ and their phenanthroline-based analogues reported so far. The incorporation of an ionic tethered functional group on PI, improved the mobility of the emissive layer and reduced the device turn-on time by 75-88%. This study shows a facile functionalization and characterization of the PI ligand as well as its potential application in optoelectronic devices (OLED).
RESUMEN
Luminescent metal-organic frameworks are an emerging class of optical sensors, able to capture and detect toxic gases. Herein, we report the incorporation of synergistic binding sites in MOF-808 through post-synthetic modification with copper for optical sensing of NO2 at remarkably low concentrations. Computational modelling and advanced synchrotron characterization tools are applied to elucidate the atomic structure of the copper sites. The excellent performance of Cu-MOF-808 is explained by the synergistic effect between the hydroxo/aquo-terminated Zr6O8 clusters and the copper-hydroxo single sites, where NO2 is adsorbed through combined dispersive- and metal-bonding interactions.
RESUMEN
We report on an organic electroluminescent device with simplified geometry and emission in the red to near infrared (NIR) spectral region which, has the lowest turn-on voltage value, 2.3 V, among light emitting electrochemical cells (LEECs). We have synthesized and characterized three novel ruthenium π-extended phenanthroimidazoles which differ on their N^N ligands. The use of dimethyl electron donating groups along with the π-extended phenanthroimidazole moiety promotes ambipolar transport thereby avoiding the use of additional charge transport layers. Furthermore, a facile cathode deposition method based on transfer of a molten alloy (Ga:In) on top of the active layer is deployed, thus avoiding high vacuum thermal deposition which adds versatile assets to our approach. We combine ambipolar charge transport organic complex design and a simple ambient cathode deposition to achieve a potentially cost effective red to NIR emitting device with outstanding performance, opening new avenues towards the development of simplified light emitting sources through device optimization.
RESUMEN
The development of new active biocompatible materials and devices is a current need for their implementation in multiple fields, including the fabrication of implantable devices for biomedical applications and sustainable devices for bio-optics and bio-optoelectronics. This paper describes a simple strategy to use designed proteins to develop protein-based functional materials. Using simple proteins as self-assembling building blocks as a platform for the fabrication of new optically active materials takes previous work one step further towards the design of materials with defined structures and functions using naturally occurring protein materials, such as silk. The proposed fabrication strategy generates thin and flexible nanopatterned protein films by letting the engineered protein elements self-assemble over the surface of an elastomeric stamp with nanoscale features. These nanopatterned protein films are easily transferred onto 3D objects (flat and curved) by moisture-induced adhesion. Additionally, flexible nanopatterned protein films are prepared by incorporating a thin polymeric layer as a back support. Finally, taking advantage of the tunability of the selected protein scaffold, the flexible protein-based surfaces are endowed with optical functions, achieving efficient lasing features. As such, this work enables the simple and cost-effective production of flexible and nanostructured, protein-based, optically active biomaterials and devices over large areas toward emerging applications.
RESUMEN
A novel technique for the creation of metal-organic framework (MOF) films based on soft-imprinting and their use as gas sensors was developed. The microporous MOF material [Zn2(bpdc)2(bpee)] (bpdc = 4,4'-biphenyldicarboxylate; bpee = 1,2-bipyridylethene) was synthesized solvothermally and activated by removing the occluded solvent molecules from its inner channels. MOF particles were characterized by powder X-ray diffraction and fluorescence spectroscopy, showing high crystallinity and intense photoluminescence. Scanning electron microscope images revealed that MOF crystals were mainly in the form of microneedles with a high surface-to-volume ratio, which together with the high porosity of the material enhances its interaction with gas molecules. MOF crystals were soft-imprinted into cellulose acetate (CA) films on quartz at different pressures. Atomic force microscope images of soft-imprinted films showed that MOF crystals were partially embedded into the CA. With this procedure, mechanically stable films were created, with crystals protruding from the CA surface and therefore available for incoming gas molecules. The sensing properties of the films were assessed by exposing them to saturated atmospheres of 2,4-dinitrotoluene, which resulted in a substantial quenching of the fluorescence after few seconds. The soft-imprinted MOF films on CA/quartz exhibit good sensing capabilities for the detection of nitroaromatics, which was attributed to the MOF sensitivity and to the novel and more efficient film processing method based on soft-imprinting.
RESUMEN
In contrast to the red electroluminescence emission frequently observed in porphyrins based OLED devices, the present devices exhibit a nearly white emission with greenish yellow, yellowish green and blue green hues in the case of Fe(II)(TCPPBr6) (TCPPBr6 = ß-hexabromo-meso-tetrakis-(4-phenyl carboxyl) porphyrinato), Zn(II)(TPPBr6) and Co(II)(TPPBr6), respectively.
RESUMEN
Novel ruthenium multi carboxylic complexes (RMCCs) have been synthesized by using ruthenium nitrosyl nitrate, 1,2,4,5-benzenetetracarboxylic acid (H4btec) and 4,7-diphenyl-1,10-phenanthroline (BPhen) as photosensitizers for titanium dioxide semiconductor solar cells. The complexes were characterized by (1)H-NMR, FT-IR, UV-Vis, ICP and CHN analyses. The reaction details and features were then described. SEM analysis revealed that the penetration of dyes into the pores of the nanocrystalline TiO2 surface was improved by increasing the number of btec units. The solar energy to electricity conversion efficiency of complexes shows that the number of attached carboxylates on a dye has an influence on the photoelectrochemical properties of the dye-sensitized electrode. An incident photon-to-current conversion efficiency (IPCE) of 13% at 510 nm was obtained for ruthenium complexes with three btec units.