Gradient columns to measure the density of microplastics.

Density gradient columns are an established industrial method for measuring the density of plastics, but have rarely been applied to environmental plastics. In this study 14 density gradient columns were used to measure the density of 150 environmental plastics particles from an urban beach, plus 100 microplastics of known identity, representing what is believed to be the most extensive density dataset for environmental plastic debris available in scientific literature. In total, 92 % of investigated particles had their density measured, with the remainder falling outside of the range of the density columns: 800-1418 kg·m-3. Error values for individual plastic particles were conservatively estimated as ≤0.27 kg·m-3, equating to the density difference associated with a distance of 1 mm in the density gradient column. Moreover, error values for plastics of known identity, based on the standard deviation of five different particles of the same polymer type, were generally low, ≤± 1.78 kg·m-3 for 75 % of polymers. The most notable exception was crumb rubber from used tyres, with a density of 1204.84 ± 105.87 kg·m-3, reflecting a heterogenous material. The majority of environmental plastics were polyethylene pellets, with densities from 823.47 to 1143.47 kg·m-3, a much wider range than reported in literature for this polymer. The densest environmental pellet was biologically attached to a stone-like particle. Otherwise, there was no evidence that environmental processing, in the form of biofilm growth or weathering, was driving variability in density. Most pellets with extremely high or low density were coloured, indicating that additives or impurities introduced during manufacturing altered the density of the virgin resin. Overall, density gradient columns show great promise for improving our knowledge of microplastic density. They represent an accurate and efficient high-throughput method, which can measure the density of ∼40 microplastics simultaneously over relatively short time periods.

The impact of riverine particles on the vertical velocities of large microplastics.

Microplastics interact with other suspended particles in aquatic systems, which may impact their environmental fate. Little is known about aggregation between suspended sediment and larger microplastics (1-5 mm), and how this impacts the vertical velocities of microplastics, although it was hypothesised these are size limited. Consumer items made of five common polymers: polypropylene (PP), high density polyethylene (HDPE), polyethylene terephthalate (PET), polyvinyl chloride (PVC) and polystyrene (PS), were fragmented by cryomilling and their vertical velocities (rising/settling) measured experimentally before and after 24-hours of aggregation with riverine particles. Microplastic size (microscopy), zeta potential and density (density gradient column) were measured, with aggregation quantified using microscopy. PP had an experimental density of 1052 kg·m-3, and sank in river water, although it is often stated as being buoyant based on literature density values. Aggregation occurred with all five polymers: 39 %-72 % of microplastics were observed to have sediment and/or organic particles adhered, depending on the polymer type. PVC had the least negative zeta potential, -8.0 ± 3.0, and showed a much higher number of adhered sediment particles than all other polymers: on average 4.55 particles, compared with <1.72 particles for other polymers. For four polymers, aggregation did not significantly change vertical velocities. However, PP particles showed a significantly slower settling velocity after aggregation: a decrease of 6.3 % based on mean averages, from 9.7 × 10-3 to 9.1 × 10-3 m·s-1. Theoretical calculations showed the amount of adsorbed sediment or biofilm required to induce a microplastic density change of ∼50 kg·m-3 was much higher than observed experimentally. Overall, this study indicates that the vertical velocities of larger microplastics are less influenced by interactions with natural particles than smaller microplastics.

Role of saltmarsh systems in estuarine trapping of microplastics.

Saltmarshes are important natural ecosystems along many temperate (and other) coastlines. They stabilize sediments and act as biofilters for a range of industrial pollutants and, potentially, microplastics. Accumulation of microplastics along estuarine coastlines may be enhanced by the presence of saltmarsh species, as they offer better particle trapping efficiency than adjacent intertidal mudflats under prevailing flood and ebb tidal currents. However, the trapping efficiency of entire saltmarsh systems under varying flow conditions has not been widely assessed. While the effects of saltmarsh systems on water flow, and on sediment transport and trapping, have been relatively well studied, little is known about the contributions of saltmarsh halophytes, resident organisms and the associated saltmarsh sediments to the trapping of microplastics. To address this, a series of flume experiments were undertaken to examine transport and accumulation of Bakelite particles (~ 500 µm) and PVC nurdles (~ 5 mm) as model plastics in sub-sampled saltmarsh and intertidal mudflat monoliths. The results showed that saltmarsh systems influenced the hydrodynamics within and above the canopy, enhancing turbulence and shear stresses. With increasing flow velocities (≤ 0.51 m s-1), negligible quantities (2 [Formula: see text] 10-4 mg L-1) of sediments and Bakelite particles were eroded and resuspended. The algal biogenic roughness from the mudflat, and the vegetative roughness from the Spartina plants on the saltmarsh, inhibited the transportation of the microplastics within the tested systems. Resident burrowing crabs (Carcinus maenas) promoted the burial, release and transport of microplastics. The results of this study provide evidence of the contributory roles of saltmarsh systems in the sequestration of microplastics and sediment stabilization. Estuarine saltmarsh systems can act as sinks for microplastics with enhanced burial from burrowing crabs under favourable flow conditions.

Battling the known unknowns: a synoptic review of aquatic plastics research from Australia, the United Kingdom and China.

Plastic pollution is a global environmental and human health issue, with plastics now ubiquitous in the environment and biota. Despite extensive international research, key knowledge gaps ("known unknowns") remain around ecosystem-scale and human health impacts of plastics in the environment, particularly in limnetic, coastal and marine systems. Here we review aquatic plastics research in three contrasting geographic and cultural settings, selected to present a gradient of heavily urbanised (and high population density) to less urbanised (and low population density) areas: China, the United Kingdom (UK), and Australia. Research from each country has varying environmental focus (for example, biota-focussed studies in Australia target various bird, fish, turtle and seal species, while UK and China-based studies focus on commercially important organisms such as bivalves, fish and decapods), and uses varying methods and reporting units (e.g. mean, median or range). This has resulted in aquatic plastics datasets that are hard to compare directly, supporting the need to converge on standardised sampling methods, and bioindicator species. While all the study nations show plastics contamination, often at high levels, datasets are variable and do not clearly demonstrate pollution gradients.

Validation of a method to quantify microfibres present in aquatic surface microlayers.

Many of the methods for microplastics quantification in the environment are criticised creating problems with data validity. Quantification of microplastics in the surface microlayer of aquatic environments using glass plate dipping holds promise as a simple field method, but its efficiency has yet to be validated. We tested a standard glass plate dipping method to assess recovery of four common polymer microfibres and two common natural fibres, under three different salinities (freshwater, brackish water, saltwater). Overall recovery rates were low (26.8 ± 1.54%) but higher recoveries were observed under saltwater treatments (36.5 ± 3.01%) than brackish water (24.5 ± 1.92%) or freshwater (19.3 ± 1.92%). The fibre types showed different recovery rates, with acrylic yielding significantly higher recovery rates (37.0 ± 2.71%) than other fibres across treatments. No clear relationship between the density of the fibres and the recovery efficiency was seen. We suggest that, where this method is used for monitoring microplastics, the results will typically underestimate the total amount present, but that recovery is sufficiently consistent to allow comparison of differences between sampling locations. When comparing data across river-estuarine or similar transects salinity should be monitored to account for salinity-induced differences in sampling recovery.

Identification of tidal trapping of microplastics in a temperate salt marsh system using sea surface microlayer sampling.

Microplastics are contaminants of increasing global environmental concern. Estuaries are a major transport pathway for land-derived plastics to the open ocean but are relatively understudied compared to coastal and open marine environments. The role of the "estuarine filter", by which the supply of sediments and contaminants to the sea is moderated by processes including vegetative trapping and particle flocculation, remains poorly defined for microplastics land to sea transfer. Here, we focus on the sea surface microlayer (SML) as a vector for microplastics, and use SML sampling to assess microplastic trapping in a temperate marsh system in Southampton Water, UK. The SML is known to concentrate microplastics relative to the underlying water and is the first part of rising tidal waters to traverse intertidal and upper tidal surfaces. Sampling a salt marsh creek at high temporal resolution allowed assessment of microplastics in-wash and outflow from the salt marsh, and its relationship with tidal state and bulk suspended sediment concentrations (SSC), over spring and neap tides. A statistically significant decrease in microplastics abundance from the flood tide to the ebb tide was found, and a weak positive relationship with SSC observed.

A rapid method for assessing the accumulation of microplastics in the sea surface microlayer (SML) of estuarine systems.

Microplastics are an increasingly important contaminant in the marine environment. Depending on their composition and degree of biofouling, many common microplastics are less dense than seawater and so tend to float at or near the ocean surface. As such, they may exhibit high concentrations in the sea surface microlayer (SML - the upper 1-1000 µm of the ocean) relative to deeper water. This paper examines the accumulation of microplastics, in particular microfibres, in the SML in two contrasting estuarine systems - the Hamble estuary and the Beaulieu estuary, southern U.K., via a novel and rapid SML-selective sampling method using a dipped glass plate. Microplastic concentrations (for identified fibres, of 0.05 to 4.5 mm length) were highest in the SML-selective samples (with a mean concentration of 43 ± 36 fibres/L), compared to <5 fibres/L for surface and sub-surface bulk water samples. Data collected show the usefulness of the dipped glass plate method as a rapid and inexpensive tool for sampling SML-associated microplastics in estuaries, and indicate that microplastics preferentially accumulate at the SML in estuarine conditions (providing a potential transfer mechanism for incorporation into upper intertidal sinks). Fibres are present (and readily sampled) in both developed and more pristine estuarine systems.