RESUMEN
OBJECTIVE: To evaluate the effect of the application of a novel fiberglass-glue cast (FGC) on the fracture gap width in experimentally created type III distal phalanx fractures in cadaveric specimens under simulated physiologic loads. STUDY DESIGN: Ex vivo biomechanical laboratory study. ANIMALS: Nine unilateral adult equine cadaver forelimbs. METHODS: Type III distal phalanx fractures were created in forelimb specimens, which maintained distal components of the passive stay apparatus. The fracture gap was measured at 5%, 20%, 25%, 50%, 75%, and 95% of fracture length (palmar articular border to solar margin) using D65Pr-PaDiO radiographs. The limb was axially loaded (700, 3600, 4600, and 6700 N) before, during, and after removal of a woven fiberglass cloth and polymethyl methacrylate cast that encompassed the sole and distal portion of the hoof wall (FGC). Fracture gap widths were compared among loads and treatments using a mixed model ANOVA. RESULTS: On average, under simulated physiological midstance loads, the fracture gap width was 0.2 mm smaller after FGC application, with the greatest decrease (0.5 mm) near the articular surface. On average, it was 0.3 mm smaller than after FGC removal. Fracture gap width was 0.1 mm greater when midstance loads transitioned from standing load to walking, trotting, and gallop loads. The fracture gap width increased by 1.3 mm with increasing distance from the articular surface. CONCLUSION: The FGC reduced the fracture gap width and prevented the fracture gap widening that occurred after FGC removal. CLINICAL SIGNIFICANCE: The findings support consideration of FGC use in the treatment of horses with type III distal phalangeal fractures.
Asunto(s)
Fracturas Óseas , Vidrio , Pezuñas y Garras , Enfermedades de los Caballos , Humanos , Caballos , Animales , Polimetil Metacrilato , Fracturas Óseas/terapia , Fracturas Óseas/veterinaria , Miembro Anterior , Extremidad Superior , Fenómenos Biomecánicos , Enfermedades de los Caballos/terapiaRESUMEN
Determining the risk of pathologic fracture in dogs with a primary bone tumor would aid in case selection for in-situ treatment options. Prior research found strong relationships between in vitro strength of canine antebrachii with primary bone tumors and CT-derived metrics. This study assesses the prognosis for pathologic fracture in dogs with distal radial bone tumors using CT-derived structural analysis metrics. CT images of the antebrachium in dogs with aggressive osseous lesions of the radius were used to calculate structural rigidity and failure forces, including axial rigidity (AR), craniocaudal bending rigidity (BR), torsional rigidity (TR), and failure forces for a slightly-curved/asymmetric beam (Fs) or a curved beam (Fc). Metrics were compared with the clinical outcome of radial fracture. Eight of 19 dogs with CT-derived metrics developed a radial fracture. The prognostic potential of the metrics to discriminate fractured and nonfractured bones was analyzed using receiver operating characteristic curves (area under the curve), stepwise logistic regression, and classification regression (CART) analyses. Fc was the most sensitive and specific metric for prognosing fracture occurrence (AUC = 0.864). When dog body weight (BW) was included, all five metrics had AUC > 0.705. Fc was the best predictor of fracture using stepwise logistic regression and CART analysis, followed by BR. An indication of fracture probability can be determined by normalizing Fc or BR with dog BW or by using the logistic regression equation of either metric with dog BW. Results warrant further analysis of a larger cohort to evaluate fracture likelihood in dogs with antebrachial bone neoplasia.
RESUMEN
OBJECTIVE: To determine the influence of interlocking screw threads on the biomechanical properties of repaired canine humeral condylar fractures. STUDY DESIGN: Ex vivo biomechanical study. SAMPLE POPULATION: Thirty-six humeral condyles. METHODS: Simulated fractures of the lateral aspect of the humeral condyle were stabilized by a 3.5 mm interlocking thread screw (ITS) or 3.5 mm buttress thread screw placed in lag (BTS-L) or positional fashion (BTS-P) and axially loaded at a walk, trot, 2-mm displacement, and failure cycles. Compact flute drill bits (CFBs) were used for ITS constructs and standard flute drill bits (SFB) for BTS constructs. The effects of bit type on drilling parameters and screw type on screw insertion properties and fragment stability were assessed. RESULTS: CFB produced a 6°C greater temperature increase (p = .042) and required 20 N higher torque (p = .003) than SFB. Insertional torque was greater for ITS than BTS-P (p = .001) and BTS-L (p = .001). Condylar fragment rotation at failure was lower in ITS (lsmean ± SE, 8.3° ± 1.9°) than BTS-L constructs (14.5° ± 2.3°, p = .011). ITS resisted greater loads (1503 ± 105 N) than BTS-P (1189 ± 99 N, p = .038) but not BTS-L (1249 ± 123 N, p = .121) constructs. CONCLUSION: Biomechanical performance of constructs was improved with ITS rather than BTS fixation. CLINICAL SIGNIFICANCE: ITS can be considered for stabilization of humeral condylar fractures in adult dogs.
Asunto(s)
Enfermedades de los Perros , Fracturas del Húmero , Animales , Fenómenos Biomecánicos , Tornillos Óseos/veterinaria , Enfermedades de los Perros/cirugía , Perros , Fijación Interna de Fracturas/veterinaria , Fracturas del Húmero/cirugía , Fracturas del Húmero/veterinaria , Húmero , TorqueRESUMEN
OBJECTIVE: To measure the density of cellular phenotypes in canine caudal cruciate ligament (CaCL), cranial cruciate ligament (CrCL), medial collateral ligament (MCL), and long digital extensor tendon (LDET). STUDY DESIGN: Ex-vivo study. METHODS: Ten CaCL, CrCL, MCL, and LDET obtained from 1 stifle of 10 dogs with no gross pathology were analyzed histologically. The density of cells with 3 nuclear phenotypes (fusiform, ovoid, and spheroid) was determined within the core region of each specimen. RESULTS: Cells with fusiform nuclei were most dense in the MCL (median [range], 319 [118-538] cells/mm2 ) and LDET (331 [61-463]), whereas cells with ovoid nuclei were most dense in the CaCL (276 [123-368]) and CrCL (212 [165-420]). The spheroid nuclear phenotype had the lowest density in all structures (31 [5-61] in CaCL, 54 [5-90] in CrCL, 2 [0-14] in MCL, and 5 [0-80] in LDET); however, the CrCL contained a denser population of spheroid cells compared with MCL and LDET (P < .05). Total cell densities did not differ among the 4 structures (P > .05). CONCLUSION: Phenotype density varied within the ligaments and tendon tested here. The cell population of CaCL and CrCL differed from that of dense collagenous tissues such as MCL and LDET. CLINICAL SIGNIFICANCE: The relatively higher density of spheroid phenotype in CrCL may reflect a distinctive native cellular population or a cellular transformation secondary to unique mechanical environment or hypoxia. This intrinsic cellular population may explain altered tissue properties prone to pathological rupture or poor healing potential of the canine CrCL.
Asunto(s)
Ligamento Cruzado Anterior/citología , Perros/anatomía & histología , Rodilla de Cuadrúpedos/anatomía & histología , Tendones/citología , Animales , Lesiones del Ligamento Cruzado Anterior/veterinaria , Fenómenos Biomecánicos , Fenotipo , Rotura/veterinaria , Rodilla de Cuadrúpedos/fisiología , TibiaRESUMEN
OBJECTIVE: To determine the effects of water temperature and cure time on cast strength. STUDY DESIGN: Prospective randomized experimental study. METHODS: Two water temperatures were tested, 23°C (cold) and 42°C (warm). Cast constructs were made of 4-inch fiberglass casting material over a rubber mandrel. Each construct was divided into 3 segments and tested in 4-point bending at 0.5, 1, and 24 hours. Stiffness and bending moment, cumulative energy, and angular deformation at yield and failure were recorded and analyzed by using repeated measures ANOVA. RESULTS: Mean time ± SD to complete the construct was 2.2 ± 0.8 and 2.3 ± 0.6 minutes for warm and cold water, respectively. Warm water and longer cure times produced constructs with greater stiffness (23.05 vs 20.88 newton-meter degrees [Nm°] at 0.5 hours), bending moment (121.75 vs 107.31 Nm° at 0.5 hours), and cumulative energy (557.33 vs 428.89 Nm° at 1 hour) at yield and failure. Longer cure time significantly increased angular deformation of rods at failure; however, water temperature did not. In general, the strongest casts were produced with warm water and after curing for 24 hours. CONCLUSION: Fiberglass casts continued to gain strength for at least 24 hours. Use of warm water increased the rate of curing, resulting in stronger constructs at earlier time points. CLINICAL SIGNIFICANCE: Use of warm water is recommended to initiate fiberglass cast curing, especially if the casted limb will be loaded soon after cast application.
Asunto(s)
Moldes Quirúrgicos/veterinaria , Vidrio/análisis , Caballos , Temperatura , Agua , Animales , Estudios Prospectivos , Distribución AleatoriaRESUMEN
OBJECTIVE: Large muscular or musculotendinous defects present a dilemma because of the inadequacies of current treatment strategies. Extracellular matrices (ECM) are potential clinically applicable regenerative biomaterials. This review summarizes information from the preclinical literature evaluating the use of ECM for muscle regeneration in animal models of volumetric muscle loss (VML). STUDY DESIGN: Literature review. SAMPLE POPULATION: Animal models of VML in which surgical repair was performed with an ECM product, with or without added cell populations. METHODS: PubMed, Google Scholar, CAB abstracts, and Scopus were searched for preclinical studies using ECM in animal models of VML. The search terms "extracellular matrix," "VML," "muscle regeneration," "cell seeded," and "scaffold" identified 40 articles that met inclusion criteria of an animal model of VML in which surgical repair was performed with an ECM product, with or without added cell populations. Key skeletal muscle repair mechanisms and experimental findings on scaffold type, VML location, and experimental animal species were summarized. CONCLUSIONS: Satellite cells and basal lamina are key endogenous contributors to skeletal muscle regeneration. ECM as a dynamic tissue component may provide structural integrity, signaling molecules, and a 3-dimensional topography conducive to muscle regeneration. Preclinical models of muscle repair most commonly used mice and rats (88%). Most experimental lesions were created in abdominal wall (33%), anterior tibialis (33%), latissimus dorsi (10%), or quadriceps (10%) muscles. Matrices varied markedly in source and preparation. Experimental outcomes of ECM and cell-seeded ECM implantation for muscle regeneration in VML were highly variable and dependent on matrix tissue source, preparation method, and anatomic site of injury. Scar tissue formation likely contributes to load transfer. Nonappendicular lesions had better regenerative results compared with appendicular VML. CLINICAL SIGNIFICANCE: The preponderance of current evidence supports the use of ECM for muscle defect repair only in specific instances, such as nonappendicular and/or partial-thickness defects. Consequently, clinical use of ECM in veterinary patients requires careful consideration of the specific ECM product, lesion size and location, and loading circumstances.
Asunto(s)
Matriz Extracelular , Músculo Esquelético/lesiones , Andamios del Tejido , Cicatrización de Heridas , Animales , Músculo Esquelético/fisiologíaRESUMEN
OBJECTIVE: To determine the influence of neoplasia on the biomechanical properties of canine antebrachia. STUDY DESIGN: Ex vivo biomechanical study. SAMPLE POPULATION: Osteosarcoma (OSA)-affected canine antebrachia (n = 12) and unaffected canine antebrachia (n = 9). METHODS: Antebrachia were compressed in axial loading until failure. A load-deformation curve was used to acquire the structural mechanical properties of neoplastic and unaffected specimens. Structural properties and properties normalized by body weight (BW) and radius length were compared using analysis of variance (ANOVA). Modes of failure were compared descriptively. RESULTS: Neoplastic antebrachia fractured at, or adjacent to, the OSA in the distal radial diaphysis. Unaffected antebrachia failed via mid-diaphyseal radial fractures with a transverse cranial component and an oblique caudal component. Structural mechanical properties were more variable in neoplastic antebrachia than unaffected antebrachia, which was partially attributable to differences in bone geometry related to dog size. When normalized by dog BW and radial length, strength, stiffness, and energy to yield and failure, were lower in neoplastic antebrachia than in unaffected antebrachia. CONCLUSIONS: OSA of the distal radial metaphysis in dogs presented for limb amputation markedly compromises the structural integrity of affected antebrachia. However, biomechanical properties of affected bones was sufficient for weight-bearing, as none of the neoplastic antebrachia fractured before amputation. The behavior of tumor invaded bone under cyclic loading warrants further investigations to evaluate the viability of in situ therapies for bone tumors in dogs.
Asunto(s)
Enfermedades de los Perros/patología , Miembro Anterior/patología , Osteosarcoma/veterinaria , Animales , Fenómenos Biomecánicos , Cadáver , Perros , Osteosarcoma/patología , Presión , Soporte de PesoRESUMEN
OBJECTIVE: To improve the prediction of fractures in dogs with bone tumors of the distal radius by identifying computed tomography (CT) indices that correlate with antebrachial bone strength and fracture location. STUDY DESIGN: Prospective experimental study. ANIMALS: Dogs with antebrachial osteosarcoma (n = 10), and normal cadaver bones (n=9). METHODS: Antebrachia were imaged with quantitative CT prior to biomechanical testing to failure. CT indices of structural properties were compared to yield force and maximum force using Pearson correlation tests. RESULTS: Straight beam failure (Fs), axial rigidity, curved beam failure (Fc), and craniocaudal bending moment of inertia (MOICrCd) CT indices most highly correlated (0.77 > R > 0.57) with yield and maximum forces when iOSA-affected and control bones were included in the analysis. Considering only OSA-affected bones, Fs, Fc, and axial rigidity correlated highly (0.85 > R > 0.80) with maximum force. In affected bones, the location of minimum axial rigidity and maximum MOICrCd correlated highly (R > 0.85) with the actual fracture location. CONCLUSIONS: CT-derived axial rigidity, Fs, and MOICrCd have strong linear relationships with yield and maximum force. These indices should be further evaluated prospectively in OSA-affected dogs that do, and do not, experience pathologic fracture.
Asunto(s)
Enfermedades de los Perros/etiología , Fracturas Óseas/veterinaria , Fracturas Espontáneas/veterinaria , Osteosarcoma/veterinaria , Tomografía Computarizada por Rayos X/veterinaria , Animales , Fenómenos Biomecánicos , Cadáver , Enfermedades de los Perros/patología , Perros , Fracturas Óseas/patología , Humanos , Osteosarcoma/complicaciones , Osteosarcoma/patología , Estudios Prospectivos , Tomografía Computarizada por Rayos X/métodosRESUMEN
OBJECTIVE: To determine if an interlocking bolt would limit subsidence of the biological fixation universal hip (BFX(®)) femoral stem under cyclic loading and enhance construct stiffness, yield, and failure properties. STUDY DESIGN: Ex vivo biomechanical study. ANIMALS: Cadaveric canine femora (10 pairs). METHODS: Paired femora implanted with a traditional stem or an interlocking stem (constructs) were cyclically loaded at walk, trot, and gallop loads while implant and bone motions were captured using kinematic markers and high-speed video. Constructs were then loaded to failure to evaluate failure mechanical properties. RESULTS: Implant subsidence was greater (P = .037) for the traditional implant (4.19 mm) than the interlocking implant (0.78 mm) only after gallop cyclic loading, and cumulatively after walk, trot, and gallop cyclic loads (5.20 mm vs. 1.28 mm, P = .038). Yield and failure loads were greater (P = .029 and .002, respectively) for the interlocking stem construct (1155 N and 2337 N) than the traditional stem construct (816 N and 1405 N). Version angle change after cyclic loading was greater (P = .020) for the traditional implant (3.89 degrees) than for the interlocking implant (0.16 degrees), whereas stem varus displacement at failure was greater (P = .008) for the interlocking implant (1.5 degrees) than the traditional implant (0.17 degrees). CONCLUSION: Addition of a stabilizing bolt enhanced construct stability and limited subsidence of a BFX(®) femoral stem. Use of the interlocking implant may decrease postoperative subsidence. However, in vivo effects of the interlocking bolt on osseointegration, bone remodeling, and stress shielding are unknown.
Asunto(s)
Perros/cirugía , Fémur/fisiología , Fémur/cirugía , Prótesis de Cadera/veterinaria , Animales , Fenómenos Biomecánicos , Clavos Ortopédicos/veterinaria , Cadáver , Diseño de PrótesisRESUMEN
OBJECTIVE: To compare the stiffness, angular deformation, and mode of failure of lumbar vertebral column constructs stabilized with bilateral pins and polymethylmethacrylate (Pin-PMMA) or with a unilateral (left) locking compression plate (LCP) with monocortical screws. STUDY DESIGN: Ex vivo biomechanical, non-randomized. SAMPLES: Cadaveric canine thoracolumbar specimens (n=16). METHODS: Thoracolumbar (T13-L3) vertebral specimens had the L1-L2 vertebral motion unit stabilized with either Pin-PMMA or LCP. Stiffness in flexion, extension, and right and left lateral bending after nondestructive testing were compared between intact (pretreated) specimens and Pin-PMMA, and LCP constructs. The Pin-PMMA and LCP constructs were then tested to failure in flexion and left lateral bending. RESULTS: Both the Pin-PMMA and LCP constructs had reduced range of motion at the stabilized L1-L2 vertebral motion unit compared to intact specimens. The Pin-PMMA constructs had less range of motion for the flexion elastic zone than LCP constructs. The Pin-PMMA constructs were stiffer than intact specimens in flexion, extension, and lateral bending, and stiffer than LCP constructs in flexion and left lateral bending. The Pin-PMMA constructs had less angular deformation at construct yield and lower residual deformation at L1-L2 than LCP constructs after destructive testing to failure in flexion. The Pin-PMMA constructs were stiffer, stronger, and had less deformation at yield than LCP constructs after destructive testing to failure in lateral bending. Most constructs failed distant to the implant and fixation site. CONCLUSIONS: Pin-PMMA constructs had greater lumbar vertebral stiffness and reduced ROM than LCP constructs; however, both Pin-PMMA and LCP constructs were stronger than intact specimens.
Asunto(s)
Clavos Ortopédicos/veterinaria , Placas Óseas/veterinaria , Perros/lesiones , Vértebras Lumbares/lesiones , Fracturas de la Columna Vertebral/veterinaria , Animales , Fenómenos Biomecánicos , Perros/cirugía , Vértebras Lumbares/cirugía , Polimetil Metacrilato , Rango del Movimiento Articular , Fracturas de la Columna Vertebral/cirugíaRESUMEN
OBJECTIVES: To develop a nonterminal large animal bone defect model for assessing the efficacy of regenerative and pharmacologic treatments designed to enhance bone healing. STUDY DESIGN: In vivo experimental. SAMPLE POPULATION: Adult gelding horses (n = 6). METHODS: Under general anesthesia, using radiographic guidance, 13.5 mm diameter bilateral, full thickness mandibular defects were created in 6 horses using a custom surgical jig and coring bit. After 16 weeks, under general anesthesia, 23 mm diameter cores that encompassed the original healing defects and surrounding parent bone material were removed for evaluation. Oxytetracycline was administered 14 days before final core harvest to label bone-forming surfaces. Healing was qualitatively assessed from decalcified hematoxylin and eosin (H&E) stained and undecalcified fluorescent labeled sections. Trabecular to cortical bone fraction (Tb.V/Ct.V), bone volume fraction (BV/TV), tissue mineral density (TMD), and apparent bone mineral density (aBMD) were quantified using microcomputed tomography and compared between left and right sides using Wilcoxon signed rank test. RESULTS: BV/TV was not significantly different between left and right-sided defects. Bone deposition occurred centripetally from the border of the original defect, filling 67% ± 16% (SD) of the defect at 16 weeks. CONCLUSION: This model has potential use for comparison of regenerative and pharmacologic products aimed to augment bone healing.
Asunto(s)
Regeneración Ósea/fisiología , Modelos Animales de Enfermedad , Caballos/cirugía , Mandíbula/cirugía , Ingeniería de Tejidos/veterinaria , Animales , Densidad Ósea , Caballos/lesiones , Masculino , Fracturas Mandibulares/cirugía , Fracturas Mandibulares/veterinaria , Ingeniería de Tejidos/métodos , Cicatrización de Heridas , Microtomografía por Rayos XRESUMEN
BACKGROUND: Condylar fractures are a major cause of morbidity and mortality in Thoroughbred racehorses. Condylar fractures have a variety of fracture configurations that suggest there may be differences in aetiopathogenesis. OBJECTIVE: To determine if exercise history differs with condylar fracture location in a population of Thoroughbred racehorses. STUDY DESIGN: Retrospective analysis of clinical and exercise data. METHODS: Exercise history of Thoroughbred racehorses that had condylar fracture repair between 1 January 2018 and 28 February 2021 was compared between racehorses that had fractures located radiographically either within the parasagittal groove (PSG) or abaxial to the PSG (non-PSG). Age, sex, and last event (race, timed work) matched control groups were compared between the PSG and non-PSG groups. Additionally, exercise history variables of both groups were each compared with a group-specific control population, each consisting of three control racehorses of equivalent age and sex matched to each affected racehorse by last event (race or official timed work) before fracture. RESULTS: Eighty-two horses with 84 fractures (45 PSG, 39 non-PSG) met inclusion criteria. Age was not different between groups (PSG: 3.4 ± 1.3 years [mean ± SD], non-PSG: 3.7 ± 1.3, p = 0.3). Number of races (PSG: 5.3 ± 7.1, non-PSG: 11.4 ± 8.9, p < 0.001), total race furlongs (PSG: 38.2 ± 54.7, non-PSG: 79.2 ± 64, p = 0.003), and number of active days (PSG: 304 ± 224, non-PSG: 488 ± 314, p = 0.003) before fracture were greater; while mean number of layups was fewer (PSG: 1.0 ± 1.2, non-PSG: 0.5 ± 0.7, p = 0.02) in horses with non-PSG fracture. Horses with non-PSG fracture had more differences compared with their respective control group than horses with PSG fractures. Outcomes following fracture repair were not different between groups. MAIN LIMITATIONS: Retrospective study, one regional racehorse population, two-dimensional imaging and potential inherent bias for fracture localisation, low statistical power for return to performance analysis. CONCLUSIONS: Thoroughbred racehorses with non-PSG condylar fractures have a more extensive exercise history than horses with PSG condylar fractures, suggesting differences in fracture aetiopathogenesis.
CONTEXTO: Fraturas condilares são uma das principais causas de morbidade e mortalidade em cavalos de corrida purosangue inglês. As fraturas condilares apresentam uma variedade de configurações que sugerem que pode haver diferenças em suas etiopatogenia. OBJETIVO: Determinar se o histórico de exercícios difere com a localização da fratura condilar em uma população de cavalos de corrida purosangue inglês. DELINEAMENTO DO ESTUDO: Análise retrospectiva de dados clínicos e de exercício. MÉTODOS: O histórico de exercícios de cavalos de corrida purosangue inglês que tiveram reparo de fratura condilar entre 1 de janeiro de 2018 e 28 de fevereiro de 2021 foi comparado entre cavalos de corrida que tiveram fratura localizada radiograficamente dentro da ranhura parasagital (RPS) ou abaxial à RPS (não RPS). Os grupos foram pareados de acordo com a idade, sexo e último evento (corrida ou trabalho cronometrado) para comparação de RPS e não RPS. Além disso, as variáveis de histórico de exercícios de ambos os grupos foram comparadas a uma população de controle específica, cada uma consistindo em três cavalos de corrida de controle com idade e sexo equivalentes combinados com cada cavalo de corrida afetado pelo último evento (corrida ou trabalho cronometrado oficial) antes da fratura. RESULTADOS: Oitenta e dois cavalos com 84 fraturas (45 RPS, 39 não RPS) atenderam aos critérios de inclusão. A idade não foi diferente entre os grupos (RPS: 3,4 ± 1,3 anos (média ± DP), não RPS: 3,7 ± 1,3, p=0,3). O número de corridas (RPS: 5,3 ± 7,1, não RPS: 11,4 ± 8,9, p<0,001), furlongs totais de corrida (RPS: 38,2 ± 54,7, não RPS: 79,2 ± 64, p=0,003) e número de dias ativos (RPS: 304 ± 224, não RPS: 488 ± 314, p=0,003) antes da fratura foram maiores; enquanto o número médio de repousos foi menor (RPS: 1,0 ± 1,2, não RPS: 0,5 ± 0,7, p=0,02) em cavalos com fratura não RPS. Cavalos com fratura não RPS tiveram mais diferenças em comparação com seu grupo controle respectivo do que cavalos com fraturas RPS. Os resultados após o reparo da fratura não foram diferentes entre os grupos. PRINCIPAIS LIMITAÇÕES: Estudo retrospectivo, uma população regional de cavalos de corrida, imagens bidimensionais e viés inerente potencial para localização de fraturas, baixo poder estatístico para análise de retorno ao desempenho. CONCLUSÕES: Cavalos de corrida purosangue inglês com fraturas condilares não RPS têm um histórico de exercícios mais extenso do que cavalos com fraturas condilares RPS, sugerindo diferenças na etiopatogenia das fraturas.
RESUMEN
OBJECTIVE: The objective of this study is to compare drilling variables and torsional mechanical properties of rabbit femora after bicortical drilling with a 1.5-mm standard surgical drill bit, acrylic drill bit, and K-wire. SAMPLES: 24 pairs of rabbit femora. METHODS: After drilling under controlled axial displacement rate, each bone was biaxially loaded in compression followed by rapid external torsion to failure. Maximum axial thrust force, maximum drill torque, integral of force and displacement, change in temperature, maximum power spectral density of the torque signal, torque vibration, and torque and angle at the yield and failure points were collected. Pre- and postyield stiffness, yield and failure energies, and postyield energy were calculated. RESULTS: The work required to drill through the cis- and transcortices (integral of force and displacement) was greater for the K-wire, followed by the acrylic and then standard drill bits, respectively. The K-wire demonstrated higher maximum torque than the drill bits at the ciscortex, and the force of drilling was significantly greater. The vibration data was greater with the acrylic and standard drill bits than the K-wire. There was no difference in torsional strength between drilling types. CLINICAL RELEVANCE: Mechanical differences exist between different drill bits and K-wire and demonstrate that the K-wire is overall more damaging than the surgical drill bit.
Asunto(s)
Hilos Ortopédicos , Fémur , Animales , Conejos , Fémur/cirugía , Fenómenos Biomecánicos , Hilos Ortopédicos/veterinaria , Torsión Mecánica , TorqueRESUMEN
OBJECTIVE: To determine the effect of implant placement on proximal femoral axial bone strains, implant subsidence, implant motion, and failure mechanical properties of Helica implants. STUDY DESIGN: In vitro biomechanical study. SAMPLE POPULATION: Cadaveric canine femora (n = 8 pairs). METHODS: Femora instrumented with strain gauges and kinematic markers were cyclically loaded in axial compression before (intact femora) and after implantation with a Helica prosthesis that engaged only cancellous bone (traditional technique) or cancellous bone and lateral cortex (modified technique) to evaluate bone strains, subsidence, and motion; femora were then loaded to failure to evaluate failure mechanical properties. RESULTS: After implantation, modified femoral prosthesis angle was 5% less than intact femora and 5.7% less than traditional implanted femora. Medial femoral bone strain was lower (P ≤ .05) for intact (-570 µ strain) than modified (-790), but not (P = .08) traditional (-700) implanted femora. High-load implant subsidence was present but small (-0.087 mm) for the modified technique. Motion (traditional and modified) increased (P = .05) during cyclic loading (-0.17 and -0.328 mm) and failure (P = .04) (-2.121 and -3.390 mm); remaining yield and failure properties revealed no significant findings (P ≤ .05). CONCLUSIONS: The modified technique resulted in a smaller neck angle and minimal subsidence. Bone strain was minimally altered so stress shielding may be less compared to findings with traditional implants. Motion detected during cyclic and failure testing may lead to implant loosening in vivo.
Asunto(s)
Perros , Fémur/cirugía , Prótesis e Implantes/veterinaria , Animales , Fenómenos Biomecánicos , Cadáver , Falla de Prótesis , Estrés MecánicoRESUMEN
OBJECTIVE: To compare a medially applied 2.7 mm locking compression plate (LCP) to a cranially applied 3.5 mm LCP in a cadaveric distal radial fracture gap model. STUDY DESIGN: In vitro mechanical testing of paired cadaveric limbs SAMPLE POPULATION: Paired radii (n = 8) stabilized with either a 2.7 mm LCP medially or a 3.5 mm LCP cranially. METHODS: Simulated distal radial comminuted fractures were created and stabilized with an LCP plate on the cranial surface in 1 limb, and on the medial surface in the contralateral limb. Gap stiffness, gap strain, and failure properties were compared between cranial and medial plate positions. Limb constructs were axially loaded, cyclically through 4 conditions that allowed mediolateral or craniocaudal bending at walk and trot loads, before monotonic failure loading. The effects of plate position on mechanical variables were assessed using paired t-tests. RESULTS: Gap stiffness was greater for cranial plate constructs than medial plate constructs for axial loading with mediolateral bending, but lower with craniocaudal bending. However, in loading that facilitated craniocaudal bending the medial plate construct also had bending apparent in the mediolateral direction. Gap strains for the different conditions followed similar trends as stiffness. Cranial plate constructs had significantly higher monotonic stiffness, yield, and failure loads. CONCLUSION: The larger, cranially applied LCP was biomechanically superior to the smaller, medially applied LCP in our distal radial fracture gap model, however the medial plate was superior to the cranial plate in cyclic loading allowing craniocaudal bending.
Asunto(s)
Placas Óseas/veterinaria , Perros , Fijación Interna de Fracturas/veterinaria , Animales , Fenómenos Biomecánicos , Huesos/fisiología , Cadáver , Miembro Anterior , Fijación Interna de Fracturas/instrumentación , Fijación Interna de Fracturas/métodos , Presión , Estrés MecánicoRESUMEN
OBJECTIVES: To (1) determine whether different types of thin film used to occlude congenital portosystemic shunts are cellophane, and (2) evaluate the influence of saline immersion and sterilization on the tensile properties of cellophane. STUDY DESIGN: Ex vivo spectroscopic evaluation and mechanical testing. SAMPLE POPULATION: Rectangular strips of thin film from 4 sources. METHODS: Samples were evaluated with Fourier Transform Infrared Spectroscopy and microscopy with a polarizing lens. Samples consistent with cellophane were divided into 5 sterilization groups: non-sterile, autoclave, gamma irradiation, hydrogen peroxide and ethylene oxide. Samples were tested while dry or after saline solution immersion. Tensile properties were compared using ANOVA, unpaired t-tests, Mann-Whitney U-tests and Fisher's exact tests. P < 0.05 was considered significant. RESULTS: One thin film was consistent with cellophane and it could be differentiated from the other thin films by visible striations. Cellophane was strongest when strips were oriented parallel with its fiber direction and saline immersion reduced its strength by 48% (P < .001). All sterilization methods except autoclave significantly weakened wet cellophane (ethylene oxide [P < .001], gamma irradiation [P < .001], and hydrogen peroxide [P < .001]). CONCLUSIONS: Thin film from most sources was not consistent with cellophane. Autoclave sterilization is the best way to preserve the strength of wet cellophane.
Asunto(s)
Celofán/química , Enfermedades de los Perros/cirugía , Sistema Porta/patología , Espectroscopía Infrarroja por Transformada de Fourier , Malformaciones Vasculares/veterinaria , Animales , Perros , Mecánica , Fragilidad Osmótica , Esterilización , Propiedades de Superficie , Resistencia a la Tracción , Malformaciones Vasculares/cirugíaRESUMEN
Focal bone lesions are often found prior to clinically relevant stress-fractures. Lesions are characterized by low bone volume fraction, low mineral density, and high levels of microdamage and are hypothesized to develop when bone tissue cannot sufficiently respond to damaging loading. It is difficult to determine how exercise drives the formation of these lesions because bone responds to mechanical loading and repairs damage. In this study, we derive steady-state rate constants for a compartment model of bone turnover using morphometric data from fractured and non-fractured racehorse proximal sesamoid bones (PSBs) and relate rate constants to racing-speed exercise data. Fractured PSBs had a subchondral focus of bone turnover and microdamage typical of lesions that develop prior to fracture. We determined steady-state model rate constants at the lesion site and an internal region without microdamage using bone volume fraction, tissue mineral density, and microdamage area fraction measurements. The derived undamaged bone resorption rate, damage formation rate, and osteoid formation rate had significant robust regression relationships to exercise intensity (rate) variables, layup (time out of exercise), and exercise 2-10 months before death. However, the direction of these relationships varied between the damaged (lesion) and non-damaged regions, reflecting that the biological response to damaging-loading differs from the response to non-damaging loading.
Asunto(s)
Resorción Ósea , Fracturas por Estrés , Huesos Sesamoideos , Huesos , Remodelación Ósea , Caballos , Huesos Sesamoideos/diagnóstico por imagen , AnimalesRESUMEN
Racehorses are susceptible to underrun heel hoof conformation. Racehorses are often shod with nails placed toward the heel. It is unknown if palmar nails restrict or alter hoof deformation in a manner that could promote the development of underrun heel conformation over time with repeated loading. To determine how the addition of palmar nails affects heel deformation during limb loading, hoof expansion and hoof wall deformations were quantified using rosette strain gauges and kinematic markers during in the vitro limb loading of cadaveric limbs that simulated midstance for walk, trot, and canter loads. Nail treatments used to attach a horseshoe to the hoof included: toe nails (T), toe and quarter nails (TQ), and toe, quarter, and heel nails (TQH). The effects of nail treatment on heel expansion and hoof wall deformations were assessed using repeated measures analysis of variance (p < 0.05). Nails placed palmar to the quarters of the hoof decreased heel expansion (p < 0.001). Heel nails resulted in the largest changes in hoof wall principal strain directions distally. The application of nails palmar to the hoof quarters alters hoof wall deformation during limb loading. The continued loading of the hoof with palmer nails could alter hoof conformation over time.
RESUMEN
During the stance phase of equine locomotion, ground reaction forces are exerted on the hoof, leading first to rapid deceleration ("braking") and later to acceleration ("propulsion") as the hoof leaves the ground. Excessive hoof deceleration has been identified as a risk factor for musculoskeletal injury and may be influenced by arena surface properties. Therefore, our objective was to evaluate the effect of arena surface type (dirt, synthetic) on hoof translation of the leading and trailing forelimbs during jump takeoff and landing. Solar hoof angle, displacement, velocity, and deceleration were captured using kinematic markers and high-speed video for four horses jumping over a 1.1 m oxer at 12 different arenas (5 dirt, 7 synthetic). Surface vertical impact and horizontal shear properties were measured simultaneously. The effects of surface type (dirt, synthetic), jump phase (takeoff, landing), and limb (leading, trailing) on hoof movement were assessed using ANOVA (p < 0.05), while the relationships of hoof movement with surface mechanical properties were examined with correlation. Slide time (p = 0.032), horizontal velocity of the hoof (p < 0.001), and deceleration (p < 0.001) were greater in the leading limb, suggesting a higher risk of injury to the leading limb when braking. However, surface type and jump phase did not significantly affect deceleration during braking.
RESUMEN
Few quantitative data exist to describe the activity of the distal muscles of the equine forelimb during locomotion, and there is an incomplete understanding of the functional roles of the majority of the forelimb muscles. Based on morphology alone it would appear that the larger proximal muscles perform the majority of work in the forelimb, whereas the smaller distal muscles fulfil supplementary roles such as stabilizing the joints and positioning the limb for impact with the ground. We measured the timing and amplitude of the electromyographic activity of the intrinsic muscles of the forelimb in relation to the phase of gait (stance versus swing) and the torque demand placed on each joint during walking, trotting and cantering. We found that all forelimb muscles, except the extensor carpi radialis (ECR), were activated just prior to hoof-strike and deactivated during stance. Only the ECR was activated during swing. The amplitudes of muscle activation typically increased as gait speed increased. However, the amplitudes of muscle activation were not proportional to the net joint torques, indicating that passive structures may also contribute significantly to torque generation. Our results suggest that the smaller distal muscles help to stabilize the forelimb in early stance, in preparation for the passive structures (tendons and ligaments) to be stretched. The distal forelimb muscles remain active throughout stance only during canter, when the net torques acting about the distal forelimb joints are highest. The larger proximal muscles activate in a complex coordination to position and stabilize the shoulder and elbow joints during ground contact.