RESUMEN
Organic materials have attracted extensive attention for potassium-ion batteries due to their flexible structure designability and environmental friendliness. However, organic materials generally suffer from unavoidable dissolution in aprotic electrolytes, causing an unsatisfactory electrochemical performance. Herein, we designed a weakly solvating electrolyte to boost the potassium storage performance of perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA). The electrolyte induces an in situ morphology evolution and achieves a nanowire structure. The weakly dissolving capability of ethylene glycol diethyl ether-based electrolyte and unique nanowire structure effectively avoid the dissolution of PTCDA. As a result, PTCDA shows excellent cycling stability (a capacity retention of 89.1% after 2000 cycles) and good rate performance (70.3 mAh g-1 at 50C). In addition, experimental detail discloses that the sulfonyl group plays a key role in inducing morphology evolution during the charge/discharge process. This work opens up new opportunities in electrolyte design for organic electrodes and illuminates further developments of potassium-ion batteries.
RESUMEN
To support the global goal of carbon neutrality, numerous efforts have been devoted to the advancement of electrochemical energy conversion (EEC) and electrochemical energy storage (EES) technologies. For these technologies, transition metal dichalcogenide/carbon (TMDC/C) heterostructures have emerged as promising candidates for both electrode materials and electrocatalysts over the past decade, due to their complementary advantages. It is worth noting that interfacial properties play a crucial role in establishing the overall electrochemical characteristics of TMDC/C heterostructures. However, despite the significant scientific contribution in this area, a systematic understanding of TMDC/C heterostructures' interfacial engineering is currently lacking. This literature review aims to focus on three types of interfacial engineering, namely interfacial orientation engineering, interfacial stacking engineering, and interfacial doping engineering, of TMDC/C heterostructures for their potential applications in EES and EEC devices. To accomplish this goal, a combination of experimental and theoretical approaches was used to allow the analysis and summary of the fundamental electrochemical properties and preparation strategies of TMDC/C heterostructures. Moreover, this review highlights the design and utilization of the interfacial engineering of TMDC/C heterostructures for specific EES and EEC devices. Finally, the challenges and opportunities of using interfacial engineering of TMDC/C heterostructures in practical EES and EEC devices are outlined. We expect that this review will effectively guide readers in their understanding, design, and application of interfacial engineering of TMDC/C heterostructures.
RESUMEN
Diluents have been extensively employed to overcome the disadvantages of high viscosity and sluggish kinetics of high-concentration electrolytes, but generally do not change the pristine solvation structure. Herein, a weakly coordinating diluent, hexafluoroisopropyl methyl ether (HFME), is applied to regulate the coordination of Na+ with diglyme and anion and form a diluent-participated solvate. This unique solvation structure promotes the accelerated decomposition of anions and diluents, with the construction of robust inorganic-rich electrode-electrolyte interphases. In addition, the introduction of HFME reduces the desolvation energy of Na+, improves ionic conductivity, strengthens the antioxidant, and enhances the safety of the electrolyte. As a result, the assembled Na||Na symmetric cell achieves a stable cycle of over 1800â h. The cell of Na||P'2-Na0.67MnO2 delivers a high capacity retention of 87.3 % with a high average Coulombic efficiency of 99.7 % after 350â cycles. This work provides valuable insights into solvation chemistry for advanced electrolyte engineering.
RESUMEN
Conversion-type electrode materials have gained massive research attention in sodium-ion batteries (SIBs), but their limited reversibility hampers practical use. Herein, we report a bifunctional nanoreactor to boost highly reversible sodium-ion storage, wherein a record-high reversible degree of 85.65% is achieved for MoS2 anodes. Composed of nitrogen-doped carbon-supported single atom Mn (NC-SAMn), this bifunctional nanoreactor concurrently confines active materials spatially and catalyzes reaction kinetics. In-situ/ex-situ characterizations including spectroscopy, microscopy, and electrochemistry, combined with theoretical simulations containing density functional theory and molecular dynamics, confirm that the NC-SAMn nanoreactors facilitate the electron/ion transfer, promote the distribution and interconnection of discharging products (Na2S/Mo), and reduce the Na2S decomposition barrier.As a result, the nanoreactor-promoted MoS2 anodes exhibit ultra-stable cycling with a capacity retention of 99.86% after 200 cycles in the full cell. This work demonstrates the superiority of bifunctional nanoreactors with two-dimensional confined and catalytic effects, providing a feasible approach to improve the reversibility for a wide range of conversion-type electrode materials, thereby enhancing the application potential for long-cycled SIBs.
RESUMEN
The advent of wearable electronics has strongly stimulated advanced research into the exploration of flexible zinc-air batteries (ZABs) with high theoretical energy density, high inherent safety, and low cost. However, the half-open battery structure and the high concentration of alkaline aqueous environment pose great challenges on the electrolyte retention capability and the zinc anode stability. Herein, a starch-based superabsorbent hydrogel polymer electrolyte (SSHPE) with high ionic conductivity, electrolyte absorption and retention capabilities, strong alkaline resistance and high zinc anode stability has been designed and applied in ZABs. Experimental and calculational analyses probe into the root of the superiority of SSHPEs, confirming the significance of the carboxyl functional groups along their polymer chains. These features endow the as-fabricated ZAB a long cycle life of 300â h, much longer than that with commonly used poly(vinyl alcohol)-based electrolyte.
RESUMEN
W atoms/clusters are employed to in situ assist the development of layered vertically aligned carbon nanotube arrays (VACNTs) through hot-filament-assisted chemical vapor deposition (HFCVD) with liquid binary Fe3O4/AlOx catalysts. The hot W filament was utilized to in situ evaporate atomic W and form W clusters on Fe catalysts, which have a strong impact on the growth of layered VACNT arrays. The migration and Ostwald ripening of Fe catalysts are found to be suppressed immediately with more W clusters deposition during CNT growth. Through controlling the deposition of W clusters, the electrochemical energy storage performance of as-prepared layered VACNT arrays is also tunable as electrodes of ion-based supercapacitors. The layered VACNT arrays can achieve a high capacity of 83.1 mF cm-2 and possess desirable rate performance due to the suitable hot filament condition (55 W for 90 s). This work provides a new perspective to in-depth understand the behavior of W filament during HFCVD and the significant role of the in situ generated W clusters on the growth of CNTs by maintaining the catalytic activity and structure of catalysts.
RESUMEN
Three-dimensional (3D) carbon networks (3DCNs) enjoy the merits of high surface area, effective mass-transfer ability, and mechanical stability. The physicochemical properties of such materials not only depend on their microstructures but also rely on the assembly forms. This work achieves different assembly forms of 3DCNs on the macroscale from powder, monolith, to clay and reveals the relations between intermolecular forces and these assembly forms. With the "weak" van der Waals forces, only 3DCN powders are obtained. The N-doping effect increases the part of "strong" van der Waals forces, which enables 3DCNs assembled as a monolith and supports 43 000 times its own weight. Furthermore, the introduction of aniline molecules and the corresponding hydrogen bond connections make carbon networks to transform into a clay with superior ductility and plasticity. Considering that 3DCNs can be engineered into functionalized materials by in situ incorporation of functional components such as Fe3O4, the composites with controllable forms are treated as promising candidate materials used in various fields.