Tyrosinase Inhibitory Peptides from Enzyme Hydrolyzed Royal Jelly: Production, Separation, Identification and Docking Analysis.

Tyrosinase is inextricably related to the development of Alzheimer's disease. The effects of natural tyrosinase inhibitors on human health have attracted widespread attention. This study aimed to isolate and analyze the tyrosinase (TYR) inhibitory peptides in the enzymatic digestion products of royal jelly. We first analyzed optimal process conditions for the enzymatic digestion of royal jelly by single-factor and orthogonal experiments and then used gel filtration chromatography to obtain five fractions (D1~D5) with molecular weights ranging from 600 to 1100 Da. LC-MS/MS was applied to identify the fractions with the highest activity, and the obtained peptides were screened and molecularly docked using AutoDock Vina. The results showed that the optimal enzymatic conditions for tyrosinase inhibition rate were acid protease, enzyme addition 10,000 U/g, initial pH 4, feed-to-liquid ratio 1:4, enzymatic temperature 55 °C, and enzymatic time 4 h. The D4 fraction had the most significant TYR inhibitory activity. The IC50 values of the three new peptides with the strongest TYR inhibitory activity, TIPPPT, IIPFIF, and ILFTLL, were obtained as 7.59 mg/mL, 6.16 mg/mL, and 9.25 mg/mL, respectively. The molecular docking results showed that aromatic and hydrophobic amino acids were more favorable to occupy the catalytic center of TYR. In conclusion, the new peptide extracted from royal jelly has the potential to be used as a natural TYR inhibitory peptide in food products with health-promoting properties.

Characterization and regulation of the 2,3-butanediol pathway in Serratia marcescens.

Serratia marcescens has been proved to be a potential strain for industrial 2,3-butanediol production for its high yield, productivity, and other advantages. In this study, the genes slaA, slaB, slaC, and slaR were successfully cloned which were further confirmed to be encoding acetolactate decarboxylase, acetolactate synthase, 2,3-butanediol dehydrogenase, and a LysR-like regulator, respectively. Unlike in Klebsiella sp. or Klebsiella pneumonie and Vibrio sp. or Vibrio cholerae, the gene slaC is separated from other genes. Then it showed that two regulators, SwrR and SlaR, are in charge of this process by exerting effect on the transcription of genes slaA and slaB. By contrast, the expression of gene slaC is unaffected by the two regulators. It means that these two regulators affect the production of 2,3-butanediol by regulating the production of acetoin. Based on these findings, we successfully accelerated the 2,3-butanediol production by inactivation of gene swrR. The obtained results and further investigations should lead to a more suitable fermentation strategy and strain improvement which would be applicable to the industrial production of 2,3-butanediol.

Activation of peroxymonosulfate by MgCoAl layered double hydroxide: Potential enhancement effects of catalyst morphology and coexisting anions.

The morphology and specific surface area of layered double hydroxide (LDH) are of great significance for optimizing the application of LDH in sewage treatment. Herein, we present a study of the relation between the catalytic property and the morphology of LDH via activating peroxymonosulfate (PMS) for degradation of organic pollutants. The results demonstrated that LDH nanoscrolls possessed a superior performance for methylene blue (MB) degradation, which achieved almost 100% removal in 40 min and the calculated apparent rate constant was about 2.1, 4.5 and 11.5 times higher than that of LDH nanosheets, Co2+ and Co3O4, respectively. According to the results of X-ray photoelectrons spectroscopy (XPS) and electron paramagnetic resonance (EPR), 1O2 was confirmed to play a dominant role in the MB degradation, where the redox cycle of Co3+/Co2+ provided the impetus for the reaction. Moreover, the pH and ion tolerance abilities of LDH nanoscrolls in PMS activating process were determined as well. Remarkably, CO32- and H2PO4- could even promote the generation of •OH and 1O2 to facilitate the progress of reaction. Overall, these findings in the study may provide more opportunities in the preparation of high-efficiency catalysts and give insight into the accelerated degradation of refractory contaminants with surrounding anions.

Microbial production of 2,3-butanediol by a surfactant (serrawettin)-deficient mutant of Serratia marcescens H30.

Serrawettin W1 produced by Serratia marcescens is a surface-active exolipid resulting in a lot foam formation during the 2,3-butanediol (2,3-BD) fermentation process. In order to avoid excessive addition of antifoam agent and microbial contamination, S. marcescens mutants deficient in serrawettin W1 formation were successfully constructed through insertional inactivation of the swrW gene coding for serrawettin W1 synthase. The shake flask and batch experiments suggested that disruption of the swrW gene led to significant reduction of the foam formation and improved 2,3-BD production a little. Ultimately, fed-batch culturing of the mutant afforded a maximum 2,3-BD concentration of 152 g l(-1) with a productivity of 2.67 g l(-1) h(-1) and a yield of 92.6% at 57 h.

Preliminary research on flow rate and free surface of the accelerator driven subcritical system gravity-driven dense granular-flow target.

A spallation target is one of the three core parts of the accelerator driven subcritical system (ADS), which has already been investigated for decades. Recently, a gravity-driven Dense Granular-flow Target (DGT) is proposed, which consists of a cylindrical hopper and an internal coaxial cylindrical beam pipe. The research on the flow rate and free surface are important for the design of the target whether in Heavy Liquid Metal (HLM) targets or the DGT. In this paper, the relations of flow rate and the geometry of the DGT are investigated. Simulations based on the discrete element method (DEM) implementing on Graphics Processing Units (GPUs) and experiments are both performed. It is found that the existence of an internal pipe doesn't influence the flow rate when the distance from the bottom of the pipe to orifice is large enough even in a larger system. Meanwhile, snapshots of the free surface formed just below the beam pipe are given. It is observed that the free surface is stable over time. The entire research is meaningful for the design of DGT.

Enhanced acetoin production by Serratia marcescens H32 with expression of a water-forming NADH oxidase.

Cofactor engineering was employed to enhance production of acetoin by Serratia marcescens H32. 2,3-Butanediol was a major byproduct of acetoin fermentation by S. marcescens H32. In order to decrease 2,3-butanediol formation and achieve a high efficiency of acetoin production, nox gene encoding a water-forming NADH oxidase from Lactobacillus brevis was expressed. Batch fermentations suggested the expression of the NADH oxidase could increase the intracellular NAD(+) concentration (1.5-fold) and NAD(+)/NADH ratio (2.9-fold). Meanwhile, 2,3-butanediol was significantly decreased (52%), and the accumulation of acetoin was enhanced (33%) accordingly. By fed-batch culture of the engineered strain, the final acetoin titer up to 75.2g/l with the productivity of 1.88 g/(lh) was obtained. To the best of our knowledge, these results were new records on acetoin fermentation ever reported.

Microbial production of 2,3-butanediol by a mutagenized strain of Serratia marcescens H30.

The production of 2,3-butanediol (2,3-BD) by Serratia marcescens H30 from sucrose was studied. Medium composition for 2,3-BD production by S. marcescens H30 was optimized in shake flask fermentations using Plackett-Burman design (PB) and response surface methodology (RSM). Results indicated that yeast extract and sodium acetate had significant effects on the 2,3-BD production. And their optimal concentrations were determined by RSM. The optimal medium was used to perform fermentation experiments by S. marcescens H30 in a 3.7l bioreactor. Several feeding strategies including interim feeding, exponential feeding and constant residual sucrose concentration feeding were compared for improving 2,3-BD production. Ultimately, a suitable control strategy which combined the respiratory quotient (RQ) control with the constant residual sucrose concentration fed-batch was developed. Using this strategy, the maximum 2,3-BD concentration of 139.92 g/l with the diol (AC+BD) productivity of 3.49 g/lh and the yield of 94.67% was obtained.