RESUMEN
We have identified cellulose solvents, comprised of binary mixtures of molecular solvents and ionic liquids that rapidly dissolve cellulose to high concentration and show upper-critical solution temperature (UCST)-like thermodynamic behaviour - upon cooling and micro phase-separation to roughly spherical microparticle particle-gel mixtures. This is a result of an entropy-dominant process, controllable by changing temperature, with an overall exothermic regeneration step. However, the initial dissolution of cellulose in this system, from the majority cellulose I allomorph upon increasing temperature, is also exothermic. The mixtures essentially act as 'thermo-switchable' gels. Upon initial dissolution and cooling, micro-scaled spherical particles are formed, the formation onset and size of which are dependent on the presence of traces of water. Wide-angle X-ray scattering (WAXS) and 13 C cross-polarisation magic-angle spinning (CP-MAS) NMR spectroscopy have identified that the cellulose micro phase-separates with no remaining cellulose I allomorph and eventually forms a proportion of the cellulose II allomorph after water washing and drying. The rheological properties of these solutions demonstrate the possibility of a new type of cellulose processing, whereby morphology can be influenced by changing temperature.
Asunto(s)
Celulosa , Líquidos Iónicos , Acetatos , Celulosa/química , Dimetilsulfóxido/química , Imidazoles/química , Líquidos Iónicos/química , LactonasRESUMEN
Poly(diisopropylaminoethyl methacrylate) (PDPA) is a pH- and thermally responsive water-soluble polymer. This study deepens the understanding of its phase separation behavior upon heating. Phase separation upon heating was investigated in salt solutions of varying pH and ionic strength. The effect of the counterion on the phase transition upon heating is clearly demonstrated for chloride-, phosphate-, and citrate-anions. Phase separation did not occur in pure water. The buffer solutions exhibited similar cloud points, but phase separation occurred in different pH ranges and with different mechanisms. The solution behavior of a block copolymer comprising poly(dimethylaminoethyl methacrylate) (PDMAEMA) and PDPA was investigated. Since the PDMAEMA and PDPA blocks phase separate within different pH- and temperature ranges, the block copolymer forms micelle-like structures at high temperature or pH.
Asunto(s)
Calefacción , Metacrilatos , Metacrilatos/química , Micelas , Polímeros/química , AguaRESUMEN
Poly(aminoethyl methacrylate) (PAEMA), poly(ethylene oxide)-block-(aminoethyl methacrylate) (PEO-PAEMA), and their guanidinylated derivates, poly(guanidine ethyl methacrylate) (PGEMA) and poly(ethylene oxide)-block-(guanidine ethyl methacrylate) (PEO-PGEMA), were prepared to study their capabilities for CO2 adsorption and release. The polymers of different forms or degree of guanidinylation were thoroughly characterized, and their interaction with CO2 was studied by NMR and calorimetry. The extent and kinetics of adsorption and desorption of N2 and CO2 were investigated by thermogravimetry under controlled gas atmospheres. The materials did not adsorb N2, whereas CO2 could be reversibly adsorbed at room temperature and released by an elevated temperature. The most promising polymer was PGEMA with a guanidinylation degree of 7% showing a CO2 adsorption capacity of 2.4 mmol/g at room temperature and a desorption temperature of 72 °C. The study also revealed relations between the polymer chemical composition and CO2 adsorption and release characteristics that are useful in future formulations for CO2 adsorbent polymer materials.
RESUMEN
Poly(N-acryloyl glycinamide) is a well-known thermoresponsive polymer possessing an upper critical solution temperature (UCST) in water. By copolymerizing N-acryloyl glycinamide (NAGA) with methacrylic acid (MAA) in the presence of a crosslinker, poly(N-acryloyl glycinamide-co-methacrylic acid) [P(NAGA-MAA)] copolymer microgels with an MAA molar fraction of 10-70 mol % were obtained. The polymerization kinetics suggests that the copolymer microgels have a random structure. The size of the microgels was between 60 and 120 nm in the non-aggregated swollen state in aqueous medium and depending on the solvent conditions, they show reversible swelling and shrinking upon temperature change. Their phase transition behavior was studied by a combination of methods to understand the process of the UCST-type behavior and interactions between NAGA and MAA. P(NAGA-MAA) microgels were loaded with silver nanoparticles (AgNPs) by the reduction of AgNO3 under UV light. Compared with the chemical reduction of AgNO3, the photoreduction results in smaller AgNPs and the amount and size of the AgNPs are dependent on the comonomer ratio. The catalytic activity of the AgNP-loaded microgels in 4-nitrophenol reduction was tested.
RESUMEN
Soft nanoparticles are interesting materials due to their size, deformability, and ability to host guest molecules. Surface properties play an essential role in determining the fate of the particles in biological medium, and coating of the nanoparticles (and polymers) with carbohydrates has been found to be an efficient strategy for increasing their biocompatibility and fine-tuning other important properties such as aqueous solubility. In this work, soft nanogels of poly(N-vinylcaprolactam), PNVCL, were surface-functionalized with different glucose and maltose ligands, and the colloidal properties of the gels were analyzed. The PNVCL nanogels were first prepared via semibatch precipitation polymerization, where a comonomer, propargyl acrylate (PA), was added after preparticle formation. The aim was to synthesize "clickable" nanogels with alkyne groups on their surfaces. The nanogels were then functionalized with two separate azido-glucosides and azido-maltosides (containing different linkers) through a copper-catalyzed azide-alkyne cycloaddition (CuAAc) click reaction. The glucose and maltose bearing nanogels were thermoresponsive and shrank upon heating. Compared to the PNVCL-PA nanogel, the carbohydrate bearing ones were larger, more hydrophilic, had volume phase transitions at higher temperatures, and were more stable against salt-induced precipitation. In addition to investigating the colloidal properties of the nanogels, the carbohydrate recognition was addressed by studying the interactions with a model lectin, concanavalin A (Con A). The binding efficiency was not affected by the temperature, which indicates that the carbohydrate moieties are located on the gel surfaces, and are capable of interacting with other biomolecules independent of temperature. Thus, the synthesis produces nanogels, which have surface functions capable of biorelevant interactions and a thermoresponsive structure. These types of particles can be used for drug delivery.
Asunto(s)
Caprolactama/análogos & derivados , Glucosa/química , Maltosa/química , Nanogeles/química , Polímeros/química , Caprolactama/química , Caprolactama/metabolismo , Coloides/química , Coloides/metabolismo , Colorantes Fluorescentes/química , Colorantes Fluorescentes/metabolismo , Glucosa/metabolismo , Maltosa/metabolismo , Polímeros/metabolismo , Propiedades de Superficie , TemperaturaRESUMEN
Amphiphilic diblock copolymers consisting of a hydrophobic core containing a polymerized ionic liquid and an outer shell composed of poly(N-isoprolylacrylamide) were investigated by capillary electrophoresis and asymmetrical flow-field flow fractionation. The polymerized ionic liquid comprised poly(2-(1-butylimidazolium-3-yl)ethyl methacrylate tetrafluoroborate) with a constant block length (n = 24), while the length of the poly(N-isoprolylacrylamide) block varied (n = 14; 26; 59; 88). Possible adsorption of the block copolymer on the fused silica capillary, due to alterations in the polymeric conformation upon a change in the temperature (25 and 45 °C), was initially studied. For comparison, the effect of temperature on the copolymer conformation/hydrodynamic size was determined with the aid of asymmetrical flow-field flow fractionation and light scattering. To get more information about the hydrophilic/hydrophobic properties of the synthesized block copolymers, they were used as a pseudostationary phase in electrokinetic chromatography for the separation of some model compounds, that is, benzoates and steroids. Of particular interest was to find out whether a change in the length or concentration of the poly(N-isoprolylacrylamide) block would affect the separation of the model compounds. Overall, our results show that capillary electrophoresis and asymmetrical flow-field flow fractionation are suitable methods for characterizing conformational changes of such diblock copolymers.
RESUMEN
The use of bare fused silica capillary in CE can sometimes be inconvenient due to undesirable effects including adsorption of sample or instability of the EOF. This can often be avoided by coating the inner surface of the capillary. In this work, we present and characterize two novel polyelectrolyte coatings (PECs) poly(2-(methacryloyloxy)ethyl trimethylammonium iodide) (PMOTAI) and poly(3-methyl-1-(4-vinylbenzyl)-imidazolium chloride) (PIL-1) for CE. The coated capillaries were studied using a series of aqueous buffers of varying pH, ionic strength, and composition. Our results show that the investigated polyelectrolytes are usable as semi-permanent (physically adsorbed) coatings with at least five runs stability before a short coating regeneration is necessary. Both PECs showed a considerably decreased stability at pH 11.0. The EOF was higher using Good's buffers than with sodium phosphate buffer at the same pH and ionic strength. The thickness of the PEC layers studied by quartz crystal microbalance was 0.83 and 0.52 nm for PMOTAI and PIL-1, respectively. The hydrophobicity of the PEC layers was determined by analysis of a homologous series of alkyl benzoates and expressed as the distribution constants. Our result demonstrates that both PECs had comparable hydrophobicity, which enabled separation of compounds with log Po/w > 2. The ability to separate cationic drugs was shown with ß-blockers, compounds often misused in doping. Both coatings were also able to separate hydrolysis products of the ionic liquid 1,5-diazabicyclo[4.3.0]non-5-ene acetate at highly acidic conditions, where bare fused silica capillaries failed to accomplish the separation.
Asunto(s)
Electroforesis Capilar/métodos , Metilmetacrilatos/química , Poliaminas/química , Polivinilos/química , Antagonistas Adrenérgicos beta/aislamiento & purificación , Adsorción , Compuestos Bicíclicos Heterocíclicos con Puentes/química , Compuestos Bicíclicos Heterocíclicos con Puentes/aislamiento & purificación , Hidrólisis , Imidazoles/química , Líquidos Iónicos/química , Líquidos Iónicos/aislamiento & purificación , Concentración Osmolar , PolielectrolitosRESUMEN
Thermally responsive hydrogel nanoparticles composed of self-assembled polystyrene-b-poly(N-isopropylacrylamide)-b-polystyrene block copolymers and fluorescent probe 1-anilinonaphthalene-8-sulfonic acid have been prepared by aerosol flow reactor method. We aimed exploring the relationship of intraparticle morphologies, that were, PS spheres and gyroids embedded in PNIPAm matrix, as well PS-PNIPAm lamellar structure, to probe release in aqueous solution below and above the cloud point temperature (CPT) of PNIPAm. The release was detected by fluorescence emission given by the probe binding to bovine serum albumin. Also, the colloidal behavior of hydrogel nanoparticles at varying temperatures were examined by scattering method. The probe release was faster below than above the CPT from all the morphologies of which gyroidal morphology showed the highest release. Colloidal behavior varied from single to moderately aggregated particles in order spheres-gyroids-lamellar. Hydrogel nanoparticles with tunable intra particle self-assembled morphologies can be utilized designing carrier systems for drug delivery and diagnostics.
Asunto(s)
Portadores de Fármacos/química , Portadores de Fármacos/síntesis química , Hidrogeles/química , Hidrogeles/síntesis química , Nanopartículas/química , Animales , Bovinos , Tamaño de la Partícula , Albúmina Sérica Bovina/químicaRESUMEN
Calorimetric and optical cryo-microscope measurements of 10-64 wt % citric acid (CA) solutions subjected to moderate (3 K/min) and slow (0.5 and 0.1 K/min) cooling/warming rates and also to quenching/moderate warming between 320 and 133 K are presented. Depending on solution concentration and cooling rate, the obtained thermograms show one freezing event and from one to three liquid-glass transitions upon cooling and from one to six liquid-glass and reverse glass-liquid transitions, one or two freezing events, and one melting event upon warming of frozen/glassy CA/H2O. The multiple freezing events and glass transitions pertain to the mother CA/H2O solution itself and two freeze-concentrated solution regions, FCS1 and FCS2, of different concentrations. The FCS1 and FCS2 (or FCS22) are formed during the freezing of CA/H2O upon cooling and/or during the freezing upon warming of partly glassy or entirely glassy mother CA/H2O. The formation of two FCS1 and FCS22 regions during the freezing upon warming to our best knowledge has never been reported before. Using an optical cryo-microscope, we are able to observe the formation of a continuous ice framework (IF) and its morphology and reciprocal distribution of IF/(FCS1 + FCS2). Our results provide a new look at the freezing and glass transition behavior of aqueous solutions and can be used for the optimization of lyophilization and freezing of foods and biopharmaceutical formulations, among many other applications where freezing plays a crucial role.
Asunto(s)
Ácido Cítrico/química , Congelación , Vidrio/química , Agua/química , Calorimetría , Soluciones , TermografíaRESUMEN
There is an urgent need for accessible purification and separation strategies of atomically precise metal clusters in order to promote the study of their fundamental properties. Although the separation of mixtures of atomically precise gold clusters Au25L18, where L are thiolates, has been demonstrated by advanced separation techniques, we present here the first separation of metal clusters by thin-layer chromatography (TLC), which is simple yet surprisingly efficient. This method was successfully applied to a binary mixture of Au25L18 with different ligands, as well as to a binary mixture of different cluster cores, Au25 and Au144, protected with the same ligand. Importantly, TLC even enabled the challenging separation of a multicomponent mixture of mixed-monolayer-protected Au25 clusters with closely similar chemical ligand compositions. We anticipate that the realization of such simple yet efficient separation technique will progress the detailed investigation of cluster properties.
RESUMEN
In this study, surface coatings were used to control the morphology of the deposited lipid layers during vesicle spreading, i.e., to control if liposomes self-assemble on a surface into a supported lipid bilayer or a supported vesicular layer. The influence of the properties of the surface coating on formation of the deposited lipid layer was studied with quartz crystal microbalance and two-wavelength multiparametric surface plasmon resonance techniques. Control of lipid self-assembly on the surface was achieved by two different types of soft substrate materials, i.e., dextran and thiolated polyethylene glycol, functionalized with hydrophobic linkers for capturing the lipid layer. The low-molecular-weight dextran-based surface promoted formation of supported lipid bilayers, while the thiolated polyethylene glycol-based surface promoted supported vesicular layer formation. A silicon dioxide surface was used as a reference surface in both measurement techniques. In addition to promoting supported lipid bilayer formation of known lipid mixtures, the dextran surface also promoted supported lipid bilayer formation of vesicles containing the cell membrane extract of human hepatoblastoma cells. The new dextran-based surface was also capable of protecting the supported lipid bilayer against dehydration when exposed to a constant flow of air. The well-established quartz crystal microbalance technique was effective in determining the morphology of the formed lipid layer, while the two-wavelength surface plasmon resonance analysis enabled further complementary characterization of the adsorbed supported lipid bilayers and supported vesicular layers.
Asunto(s)
Membrana Dobles de Lípidos/química , Línea Celular Tumoral , Humanos , Propiedades de SuperficieRESUMEN
Even though nanocomposites have provided a plethora of routes to increase stiffness and strength, achieving increased toughness with suppressed catastrophic crack growth has remained more challenging. Inspired by the concepts of mechanically excellent natural nanomaterials, one-component nanocomposites were fabricated involving reinforcing colloidal nanorod cores with polymeric grafts containing supramolecular binding units. The concept is based on mechanically strong native cellulose nanocrystals (CNC) grafted with glassy polymethacrylate polymers, with side chains that contain 2-ureido-4[1H]-pyrimidone (UPy) pendant groups. The interdigitation of the grafts and the ensuing UPy hydrogen bonds bind the nanocomposite network together. Under stress, UPy groups act as sacrificial bonds: simultaneously providing adhesion between the CNCs while allowing them to first orient and then gradually slide past each other, thus dissipating fracture energy. We propose that this architecture involving supramolecular binding units within side chains of polymer grafts attached to colloidal reinforcements opens generic approaches for tough nanocomposites.
Asunto(s)
Celulosa/química , Nanocompuestos/química , Nanopartículas/química , Enlace de Hidrógeno , Microscopía Electrónica de RastreoRESUMEN
Mixing a bis-hydrophilic, cationic miktoarm star polymer with a linear polyanion leads to the formation of unilamellar polymersomes, which consist of an interpolyelectrolyte complex (IPEC) wall sandwiched between poly(ethylene oxide) brushes. The experimental finding of this rare IPEC morphology is rationalized theoretically: the star architecture forces the assembly into a vesicular shape due to the high entropic penalty for stretching of the insoluble arms in non-planar morphologies. The transmission electron microscopy of vitrified samples (cryogenic TEM) is compared with the samples at ambient conditions (in situ TEM), giving one of the first TEM reports on soft matter in its pristine environment.
Asunto(s)
Electrólitos/química , Polímeros/química , Microscopía por Crioelectrón , Electrones , Microscopía Electrónica de TransmisiónRESUMEN
[2-(Methacryloyl)oxyethyl]trimethylammonium chloride was successfully polymerized by surface-initiated atom transfer radical polymerization method on the inner surface of fused-silica capillaries resulting in a covalently bound poly([2-(methacryloyl)oxyethyl]trimethylammonium chloride) coating. The coated capillaries provided in capillary electrophoresis an excellent run-to-run repeatability, capillary-to-capillary and day-to-day reproducibility. The capillaries worked reliably over 1 month with EOF repeatability below 0.5%. The positively charged coated capillaries were successfully applied to the capillary electrophoretic separation of three standard proteins and five ß-blockers with the separation efficiencies ranging from 132,000 to 303,000 plates/m, and from 82,000 to 189,000 plates/m, respectively. In addition, challenging high- and low-density lipoprotein particles could be separated. The hydrodynamic sizes of free polymer chains in buffers used in the capillary electrophoretic experiments were measured for the characterization of the coatings.
Asunto(s)
Antagonistas Adrenérgicos beta/aislamiento & purificación , Cationes/química , Electrólitos/química , Electroforesis Capilar/métodos , Proteínas/aislamiento & purificación , Dióxido de Silicio/química , Antagonistas Adrenérgicos beta/química , Animales , Pollos , Electroforesis Capilar/instrumentación , Caballos , Humanos , Polimerizacion , Proteínas/química , PorcinosRESUMEN
[This corrects the article DOI: 10.3389/fchem.2021.721656.].
RESUMEN
The use of additives in crystallization of pharmaceuticals is known to influence the particulate properties critically affecting downstream processing and the final product performance. Desired functionality can be build into these materials, e.g. via optimized synthesis of a polymeric additive. One such additive is the thermosensitive polymer poly(N-isopropyl acrylamide) (PNIPAM). The use of PNIPAM as a crystallization additive provides a possibility to affect viscosity at separation temperatures and nucleation and growth rates at higher temperatures. In this study, novel PNIPAM derivatives consisting of both isotactic-rich and atactic blocks were used as additives in evaporative crystallization of a model compound, nitrofurantoin (NF). Special attention was paid to possible interactions between NF and PNIPAM and the aggregation state of PNIPAM as a function of temperature and solvent composition. Optical light microscopy and Raman and FTIR spectroscopy were used to investigate the structure of the NF crystals and possible interaction with PNIPAM. A drastic change in the growth mechanism of nitrofurantoin crystals as monohydrate form II (NFMH-II) was observed in the presence of PNIPAM; the morphology of crystals changed from needle to dendritic shape. Additionally, the amphiphilic nature of PNIPAM increased the solubility of nitrofurantoin in water. PNIPAMs with varying molecular weights and stereoregularities resulted in similar changes in the crystal habit of the drug regardless of whether the polymer was aggregated or not. However, with increased additive concentration slower nucleation and growth rates of the crystals were observed. Heating of the crystallization medium resulted in phase separation of the PNIPAM. The phase separation had an influence on the achieved crystal morphology resulting in fewer, visually larger and more irregular dendritic crystals. No proof of hydrogen bond formation between PNIPAM and NF was observed, and the suggested mechanism for the observed dendritic morphology is related to the steric hindrance phenomenon. PNIPAM can be used as a crystallization additive with an obvious effect on the growth of NF crystals.
Asunto(s)
Resinas Acrílicas/química , Polímeros/química , Cristalización/métodos , Peso Molecular , Nitrofurantoína/química , Solubilidad , Solventes/química , Temperatura , Viscosidad , Agua/químicaRESUMEN
Aqueous solution and water-air interfacial properties of associative thermally responsive A-B-A stereoblock poly(N-isopropylacryl amide), PNIPAM, polymers were studied and compared to atactic PNIPAM. The A-B-A polymers consist of atactic PNIPAM as a hydrophilic block (either A or B) and a water-insoluble block of isotactic PNIPAM. The surface tensions of aqueous PNIPAM solutions were measured as a function of both temperature and concentration. The isotactic blocks did not have an effect on the surface activity of the solutions. Rheological measurements on the water-air interface showed that the aggregated PNIPAMs containing isotactic blocks increased the elasticity of the surface significantly as compared to the atactic reference upon heating. Two fluorescence probes, pyrene and (4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (4HP), added to the aqueous polymer solutions were concluded to reside in surroundings with lower polarity and increased microviscosity in cases when the polymers contained isotactic blocks, as compared to ordinary atactic polymers.
Asunto(s)
Acrilamidas/química , Fluorescencia , Polímeros/química , Resinas Acrílicas , Modelos Moleculares , Estructura Molecular , Reología , Tensión SuperficialRESUMEN
Soft nanoparticles are an important class of material with potential to be used as carriers of active compounds. Swollen, penetrable particles can act as a host for the active ingredients and provide stability, stimuli-responsiveness and recyclability for the guest. Thermoresponsive colloidal gel particles are especially attractive for such applications due to the extremely soft structure, size and responsiveness. Poly(N-vinylcaprolactam) (PNVCL) is a much studied, popular thermoresponsive polymer. The polymer has low toxicity and the phase transition temperature is close to body temperature. During the phase transition, the polymer becomes less soluble, the particle expels a large part of water and the particle collapses to a more compact form. The diffusion of material in and from the particles is largely affected by this transition. As the solubility of the polymer changes, so do the interactions with the loaded compound. This feature article focuses on the synthetic methods, properties and applications of soft PNVCL particles.
Asunto(s)
Caprolactama , Caprolactama/análogos & derivados , Caprolactama/química , Polímeros/química , Temperatura , Agua/químicaRESUMEN
BACKGROUND: Polyethylenimine (PEI) polyplexes mediate efficient gene transfer only at high +/- charge ratios at which free noncomplexed PEI is present. The excess of PEI gives polyplexes a positive surface charge that plays a role in polyplex binding on the cell membrane. Although positively charged PEI polyplexes are known to interact with anionic cell-surface glycosaminoglycans (GAGs), the exact role of free PEI in such interactions is unclear. METHODS: Chinese hamster ovary wild-type cells and mutants lacking cell-surface GAGs were transfected with marker genes using PEI polyplexes with and without free PEI. The total amount of cell-associated plasmid DNA (pDNA) delivered by polyplexes was determined by quantitative real-time PCR and transgene expression was determined using ß-galactosidase and luciferase assays. RESULTS: Transfection activity of polyplexes without free PEI in cells expressing cell-surface GAGs was low even though pDNA was delivered to cells. In the absence of cell-surface GAGs, polyplexes without free PEI had high transfection efficacy. This indicates that the cell-surface GAGs inhibit transfection by purified polyplexes. PEI polyplexes with free carrier mediated transfection in both normal and GAG-deficient cells because free PEI overcomes the inhibitory effect of cell-surface GAGs on transfection. The intracellular elimination of pDNA was faster in the presence of GAGs and, despite improved transfection, free PEI reduced pDNA association with the cells. CONCLUSIONS: Free PEI is essential for minimizing the undesirable binding of polyplexes to cell-surface GAGs that have a negative impact on transfection. The same mechanism may be important in transfections with other polyplexes that require high charge ratios for transfection.
Asunto(s)
ADN/metabolismo , Glicosaminoglicanos/metabolismo , Polietileneimina/metabolismo , Animales , Células CHO , Cricetinae , Cricetulus , Expresión Génica , Técnicas de Transferencia de Gen , Espacio Intracelular/metabolismo , Plásmidos/genética , Plásmidos/metabolismo , Polietileneimina/química , Polietileneimina/toxicidad , Transfección , TransgenesRESUMEN
A series of amphiphilic star and linear block copolymers were synthesized using ATRP. The core consisted of either polystyrene (PS) or poly(n-butyl acrylate) (PBuA), having different glass-transition (T(g)) values. These polymers were used as macroinitiators in the polymerization of the cationic 2-(dimethylamino)ethyl methacrylate (DMAEMA). The polymers were used to study the effects of polymer architecture and flexibility on the self-assembling properties, DNA complexation, and transfection. All polymers formed core-shell micelles in aqueous solutions and condensed plasmid DNA. Linear PDMAEMA-PBuA-PDMAEMA has transfection efficiency comparable to PEI25K in ARPE19 cell line. Glassy state of the micellar core and star-shaped architecture decreased the DNA transfection compared with the rubbery and linear polymer structures. The polymers showed low cellular toxicity at low nitrogen/phosphate (n/p) ratios.