Increased Demand of Obese Women for Protectins, Maresin, and Resolvin D1 in the Last Trimester of Pregnancy.

BACKGROUND: Pregnancy is a physiological state during which inflammation occurs. This complex biological response is necessary for the implantation process as well as delivery. In turn, its suppression during gestation favors the normal course of the pregnancy. Therefore, the presence of pro-resolving mediators, EPA and DHA derivatives, The aim of this study was to investigate the changes in the levels of anti-inflammatory resolvins and their precursors in different trimesters of pregnancy with consideration of the women's weight, including overweight and obese women before pregnancy. METHODS: A total of 78 women participated in this study; the mean age and BMI before pregnancy were 32.3 ± 5.52 and 27.73 ± 6.13, respectively. The patients were divided into two groups, considering their BMI before pregnancy. The extraction of eicosanoids was performed by high-performance liquid chromatography. The results obtained were subjected to statistical analysis. The levels of all studied parameters showed statistically significant differences between the study group (SG) and the control group (CG) in the different trimesters of pregnancy. Over the course of pregnancy, the levels of protection (PDX), maresin, resolvins (RvD1, RvE1), and their precursors differed in relation to the trimester of pregnancy and the division into groups considering the correct body weight before pregnancy. RESULTS: Overweight or obese women had significantly lower levels of RvE1 in the third trimester and their precursors compared to normal-weight women. While the levels of PDX and RvD1 were significantly higher, this may be due to both a lower intake of products rich in omega-3 fatty acids by obese women and an increased need of obese women's bodies to quench chronic inflammatory processes associated with obesity. CONCLUSIONS: Both EPA and DHA derivatives are involved in calming down inflammation during pregnancy, which was observed.

Comparison of Dental Zirconium Oxide Ceramics Produced Using Additive and Removal Technology for Prosthodontics and Restorative Dentistry-Strength and Surface Tests: An In Vitro Study.

BACKGROUND: The aim of this in vitro study was to determine the mechanical and functional properties of zirconium oxide ceramics made using 3D printing technology and ceramics produced using conventional dental milling machines. METHODS: Forty zirconia samples were prepared for this study: the control group consisted of 20 samples made using milling technology, and the test group consisted of 20 samples made using 3D printing technology. Their surface parameters were measured, and then their mechanical parameters were checked and compared. Density, hardness, flexural strength and compressive strength were tested by performing appropriate in vitro tests. After the strength tests, a comparative analysis of the geometric structure of the surfaces of both materials was performed again. Student's t-test was used to evaluate the results (p < 0.01). RESULTS: Both ceramics show comparable values of mechanical parameters, and the differences are not statistically significant. The geometric structure of the sample surfaces looks very similar. Only minor changes in the structure near the crack were observed in the AM group. CONCLUSION: Ceramics made using additive technology have similar mechanical and surface parameters to milled zirconium oxide, which is one of the arguments for the introduction of this material into clinical practice. This in vitro study has shown that this ceramic can compete with zirconium made using CAD/CAM (Computer-Aided Design and Computer-Aided Manufacturing) methods.

The Washout Resistance of Bioactive Root-End Filling Materials.

Fast-setting bioactive cements were developed for the convenience of retrograde fillings during endodontic microsurgery. This in vitro study aimed to investigate the effect of irrigation on the washout of relatively fast-setting materials (Biodentine, EndoCem Zr, and MTA HP) in comparison with MTA Angelus White and IRM in an apicectomy model. Washout resistance was assessed using artificial root ends. A total of 150 samples (30 for each material) were tested. All samples were photographed using a microscope, and half of them were also scanned. The samples were irrigated and immersed in saline for 15 min. Then the models were evaluated. Rinsing and immersing the samples immediately after root-end filling and after 3 min did not disintegrate the fillings made of all tested materials except Biodentine. Root-end fillings made of Biodentine suffered significant damage both when rinsing was performed immediately and 3 min after the filling. Quantitative assessment of washed material resulted in a slight loss of IRM, EndoCem MTA Zr, and MTA HP. MTA Angelus White showed a slightly greater washout. Rinsing and immersion of Biodentine restorations resulted in their significant destruction. Under the conditions of the current study, the evaluated materials, excluding Biodentine, showed good or relatively good washout resistance.

Polyethylene/Polyamide Blends Made of Waste with Compatibilizer: Processing, Morphology, Rheological and Thermo-Mechanical Behavior.

The aim of this study was to develop a polyethylene/polyamide (R-PE/R-PA) regranulated product made from post-consumer wastes grafted with polyethylene-graft-maleic anhydride (PE-g-MAH) by reactive extrusion in a twin-screw extruder equipped with an external mixing zone. The compatibility effect of PE-g-MAH used as a modifier in R-PE/R-PA blends was evaluated by means of differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA), while the analysis of the chemical structure of this blend was carried out by Fourier transform infrared spectroscopy (FT-IR). The thermal properties, complex viscosity, and selected usage properties of R-PE/R-PA blends compatibilized with PE-g-MAH, i.e., density and water absorption, were evaluated. The morphology of the blends with and without the compatibilizer was observed by scanning electron microscopy. The R-PE/R-PA/MAH blend shows heterogenic structure, which is a result of the chemical reaction in reactive extrusion between functional groups of PE-g-MAH used as modifier and the end groups of R-PA6. The results show that the R-PE/R-PA blend with increased PE-g-MAH content showed increased hardness, stiffness, and ultimate tensile strength due to the increased degree of crystallinity. The increase in crystallinity is proportional to the improvement of the mechanical properties. Moreover, it is shown that 1 wt.% PE-g-MAH added to the R-PE/R-PA waste blend increases the interfacial interactions and compatibility between R-PE and R-PA, resulting in decreased polyamide particle size. Finally, the results show that it is possible to produce good quality regranulated products with advantageous properties and structure from immiscible polymer waste for industrial applications.

Effect of nano-hydroxyapatite and ozone on approximal initial caries: a randomized clinical trial.

The aim of the study was to assess the efficacy of three methods of enamel remineralization on initial approximal caries: (1) a nano-hydroxyapatite gel, (2) gaseous ozone therapy, (3) combination of a nano-hydroxyapatite gel and ozone. Patients (n = 92, age 20-30 years) with initial approximal enamel lesions on premolar and molar teeth (n = 546) were randomly allocated to three groups subjected to a 6-months treatment: Group I: domestic nano-hydroxyapatite remineralizing gel, group II: in-office ozone therapy, group III: both domestic remineralizing gel and ozone therapy. Caries lesions were assessed on bitewing radiographs at baseline, after 1 year and after 2 years. At one-year follow-up, the smallest rate of lesions with remineralisation (36.5%) was found in group I, and the highest (69.3%)-in group III. In group III a significant remineralisation was noticed in after 1 year and then a demineralisation after 2 years. Thus nano-hydroxyapatite gel and ozone therapy exert some capacities to remineralize approximal enamel and dentine subsurface lesions of premolar and molar teeth. Moreover, the combination of both methods produces the best effect compared to nano-hydroxyapatite or ozone therapy applied alone. However, the treatment should be continued for a long time in order to achieve nonrestorative recovery of caries.

The ossification of the metacarpal and phalangeal bones in human foetuses.

An evaluation was made of the ossification level of the metacarpal and phalangeal bones in human foetuses of both sexes from the 4th to the 9th month of gestation. Our results indicate that ossification of phalangeal bones 1 to 5 always started at the distal end of the phalanx and endochondral ossification prevailed in the proximal phalanx of the thumb.

[Frequency and etiology of noncarious cervical lesions with pulp exposure]. / Badanie czestosci wystepowania i przyczyn powstawania niepróchnicowych ubytków przyszyjkowych powiklanych obnazeniem miazgi.

PURPOSE: Noncarious cervical lesions have a multifactorial etiology encompassing occlusal trauma, toothbrush abrasion, and exposure of enamel to erosive factors. The purpose of this study was to determine the frequency of cervical lesions with exposure of pulp and to analyze their etiology. MATERIAL AND METHODS: The study was done in 124 patients (59 women and 65 men) with a mean age of 44 years (15-72 years). Clinical assessment of cervical lesions was based on criteria of the universal tooth wear index for the cervical surface. Additionally, the following findings were recorded: frequency of cervical lesions depending on tooth type, pulp exposure, oral hygiene status, and type of occlusal guidance. The questionnaire consisted of detailed questions concerning toothbrushing, frequency of consumption of some foods, and parafunctional habits. The risk of cervical lesion was estimated with the logistic regression model. RESULTS: The frequency, localization, and depth of noncarious cervical lesions were related to age of the patient. Very deep defects with pulp exposure were found in 44 teeth. The effect of consumption of acid foods and drinks and of oral hygiene habits on the depth of wedge-shaped defects was corroborated. Correlations between lateral excursive tooth contact, bruxism, and formation of cervical lesions were disclosed, confirming the relationship between occlusal pathology and cervical lesions. CONCLUSIONS: Elucidation of the multifactorial etiology of cervical lesions is important for proper treatment and prevention of pulp exposure.

[A comparative evaluation of Apex D.S.P. and Root ZX Apex locators. An in vitro study]. / Ocena porównawcza endometrów Apex D.S.P. i Root ZX. Badanie in vitro.

INTRODUCTION: In modern endodontics, no possibility of the root canal preparation is allowed, unless its length was individually determined. Only until recently, the length was assessed on the basis of the radiograph with the file placed into the root of the canal. However, apex locators have been in use for this assessment for some time. The newest ones, called the apex locators with different frequencies, in opposition to the classical ones, allow for accurate measurement even in teeth with wet content and periapical lesions. The aim of this in vitro study was a comparison of accuracy of two apex locators with different frequencies. MATERIAL AND METHODS: Thirty single-rooted teeth were used in this study. After access cavity preparation, the actual canal length was determined, and subsequently they were placed in alginate impression material in order to perform measurements with Root ZX (Morita, Japan) and Apex D.S.P. (Septodont, France) apex locators. The obtained lengths were measured with endodontic ruler. RESULTS: Length concordance with the actual canal length for Root ZX apex locator was 93.3%. In two cases, electronic measurement was inaccurate--one too short and one too long. For Apex D.S.P. device precise measurements were obtained in 90% of cases with 10% of results being too long if compared to the actual values. Statistical analysis did not disclose significant differences between the measurements. Length value comparison, for the assessed apex locators, allowed to confirm result concordance in 28 of 30 measurements (93.3%). In 2 remaining cases, lengths determined by the Apex D.S.P. device were 1 mm longer than the values for Root ZX apex locator. CONCLUSIONS: Root ZX and Apex D.S.P. apex locators allow for relatively accurate assessment of the root canal length. Precision of these two devices is comparable.

[Analysis of etiological factors involved in noncarious cervical lesions]. / Analiza czynników etiologicznych ubytków przyszyjkowych niepróchnicowego pochodzenia.

PURPOSE: The etiopathology of noncarious cervical lesions (NCCL) is multifactorial and still not fully understood. Tooth wear is defined as loss of dental hard tissue by a chemical or mechanical process that does not involve bacteria. This form of tooth surface loss includes attrition, abrasion, erosion, and abfraction. Noncarious cervical lesions represent loss of tooth structure at the cementoenamel junction. The purpose of this clinical study of NCCL was to analyze the etiology in relation to age and to identify the most important risk factors associated with cervical lesions, as well as patients and teeth more susceptible to NCCL with a focus on more effective treatment of this condition. MATERIAL AND METHODS: The study group comprised 124 patients with NCCL, aged 15-75 years (mean = 44). A questionnaire was distributed addressing medical history--gastric disorders, dietary habits--consumption of acidic drinks, dental history, oral hygiene practices, and parafunctional habits. Clinical examination of tooth wear was performed on four tooth surfaces after air-drying. The distribution and severity of tooth wear was graded using the tooth wear index (TWI) calculated with a computer programme allowing for tooth characteristic to be determined for each decade of life. Depth of the cervical defect was measured with a periodontal probe. TWI was devised to reveal the extent of tooth surface wear irrespective of the cause. Raw scores were compared with the computer using predetermined threshold values which are set to distinguish between acceptable and unacceptable pathological levels of tooth wear for each decade of life and each tooth surface. Dentition status, oral hygiene, periodontal status, gingival recession, number of teeth and their mobility, oral symptoms of parafunction and relationship to lateral and protrusive tooth contact schemes was assessed and analyzed. Statistical analyses were performed with the Stata Statistical Software: release 5. The risk of NCCL formation was estimated with the logistic regression model. Results were presented as odds ratio, 95% confidence interval, and p probability. RESULTS: Tooth wear on all surfaces of the tooth, including cervical, was related to age and the ranges were 25-60%. Older patients were more likely to exhibit NCCL. Frequency, localization, and depth of noncarious cervical lesions in a given group of teeth was related to age, although NCCL was more common in premolars (mean = 85.1%). Associations between oral hygiene, consumption of acidic drinks, status of periodontium, number of teeth, their mobility and etiology of wedge-shaped defects were revealed. A relationship between lateral excursive contact of teeth, bruxism, and formation of cervical lesions was established evidencing a correlation between occlusal and cervical pathology. CONCLUSIONS: 1. Cervical lesions were most common in premolars. 2. Early detection of dental erosion is important for prevention of serious irreversible damage to dentition. 3. An understanding of the multifactorial nature of tooth wear and risk factors of erosion, abrasion, and ab-fraction is important in the patient's diagnostic protocol and management strategy.