Printed Potentiometric Nitrate Sensors for Use in Soil.

Plant-available nitrogen, often in the form of nitrate, is an essential nutrient for plant growth. However, excessive nitrate in the environment and watershed has harmful impacts on natural ecosystems and consequently human health. A distributed network of nitrate sensors could help to quantify and monitor nitrogen in agriculture and the environment. Here, we have developed fully printed potentiometric nitrate sensors and characterized their sensitivity and selectivity to nitrate. Each sensor comprises an ion-selective electrode and a reference electrode that are functionalized with polymeric membranes. The sensitivity of the printed ion-selective electrodes was characterized by measuring their potential with respect to a commercial silver/silver chloride reference electrode in varying concentrations of nitrate solutions. The sensitivity of the printed reference electrodes to nitrate was minimized with a membrane containing polyvinyl butyral (PVB), sodium chloride, and sodium nitrate. Selectivity studies with sulphate, chloride, phosphate, nitrite, ammonium, calcium, potassium, and magnesium showed that high concentrations of calcium can influence sensor behavior. The printed ion-selective and reference electrodes were combined to form a fully printed sensor with sensitivity of -48.0 ± 3.3 mV/dec between 0.62 and 6200 ppm nitrate in solution and -47 ± 4.1 mV/dec in peat soil.

The Buckling Spectra of Nanoparticle Surfactant Assemblies.

Fine control over the mechanical properties of thin sheets underpins transcytosis, cell shape, and morphogenesis. Applying these principles to artificial, liquid-based systems has led to reconfigurable materials for soft robotics, actuation, and chemical synthesis. However, progress is limited by a lack of synthetic two-dimensional membranes that exhibit tunable mechanical properties over a comparable range to that seen in nature. Here, we show that the bending modulus, B, of thin assemblies of nanoparticle surfactants (NPSs) at the oil-water interface can be varied continuously from sub-kBT to 106kBT, by varying the ligands and particles that comprise the NPS. We find extensive departure from continuum behavior, including enormous mechanical anisotropy and a power law relation between B and the buckling spectrum width. Our findings provide a platform for shape-changing liquid devices and motivate new theories for the description of thin-film wrinkling.

Mechanical Properties of Solidifying Assemblies of Nanoparticle Surfactants at the Oil-Water Interface.

The effect of polymer surfactant structure and concentration on the self-assembly, mechanical properties, and solidification of nanoparticle surfactants (NPSs) at the oil-water interface was studied. The surface tension of the oil-water interface was found to depend strongly on the choice of the polymer surfactant used to assemble the NPSs, with polymer surfactants bearing multiple polar groups being the most effective at reducing interfacial tension and driving the NPS assembly. By contrast, only small variations in the shear modulus of the system were observed, suggesting that it is determined largely by particle density. In the presence of polymer surfactants bearing multiple functional groups, NPS assemblies on pendant drop surfaces were observed to spontaneously solidify above a critical polymer surfactant concentration. Interfacial solidification accelerated rapidly as polymer surfactant concentration was increased. On long timescales after solidification, pendant drop interfaces were observed to spontaneously wrinkle at sufficiently low surface tensions (approximately 5 mN m-1). Interfacial shear rheology of the NPS assemblies was elastic-dominated, with the shear modulus ranging from 0.1 to 1 N m-1, comparable to values obtained for nanoparticle monolayers elsewhere. Our work paves the way for the development of designer, multicomponent oil-water interfaces with well-defined mechanical, structural, and functional properties.

Effect of Nanoparticle Surfactants on the Breakup of Free-Falling Water Jets during Continuous Processing of Reconfigurable Structured Liquid Droplets.

Structured liquids, whose 3-D morphology can adapt and respond to external stimuli, represent a revolutionary materials platform for next-generation energy technologies, such as batteries, photovoltaics, and thermoelectrics. Structured liquids can be crafted by the jamming of interfacial assemblies of nanoparticle (NP) surfactants. Due to the interactions between functional groups on nanoparticles dispersed in one liquid and polymers having complementary end-functionality dissolved in a second immiscible fluid, the anchoring of a well-defined number of polymer chains onto the NPs leads to the formation of NP surfactants that assemble at the interface and reduce the interfacial energy. Microfluidic techniques provide a simple and versatile route to produce one liquid phase in a second where the shape of the dispersed liquid phase can range from droplets to tubules depending on the flow conditions and the interfacial energies. In this study, the effect of NP surfactants on Plateau-Rayleigh (PR) instabilities of a free-falling jet of an aqueous dispersion of carboxylic acid functionalized silica NPs into a toluene phase containing amine-terminated polydimethylsiloxane (PDMS-NH2) is investigated. NP surfactants were found to significantly affect the breakup of laminar liquid jets, resulting in longer jet breakup lengths and dripping to jetting flow transitions.

Self-assembly of nanomaterials at fluid interfaces.

Recent developments in the field of the self-assembly of nanoscale materials such as nanoparticles, nanorods and nanosheets at liquid/liquid interfaces are reviewed. Self-assembly behavior of both biological and synthetic particles is discussed. For biological nanoparticles, the nanoparticle assembly at fluid interfaces provides a simple route for directing nanoparticles into 2D or 3D constructs with hierarchical ordering. The interfacial assembly of single-walled carbon nanotubes (SWCNTs) at liquid interfaces would play a key role in applications such as nanotube fractionation, flexible electronic thin-film fabrication and synthesis of porous SWCNT/polymer composites foams. Liquids can be structured by the jamming of nanoparticle surfactants at fluid interfaces. By controlling the interfacial packing of nanoparticle surfactants using external triggers, a new class of materials can be generated that combines the desirable characteristics of fluids such as rapid transport of energy carriers with the structural stability of a solid.

Reconfigurable Microfluidic Droplets Stabilized by Nanoparticle Surfactants.

Interfacial assemblies of nanoparticles can stabilize liquid-liquid interfaces. Due to the interactions between functional groups on nanoparticles dispersed in one liquid and polymers having complementary end-functionality dissolved in a second immiscible fluid, the anchoring of a well-defined number of polymer chains onto the nanoparticles leads to the formation of NP-surfactants that assemble at the interface and reduce the interfacial energy. We have developed droplet interfaces covered with elastic, responsive monolayers of NP-surfactants. Due to the presence of an elastic layer at the interface, the droplets offer a greater resistance to coalescence and can prevent the exchange of materials across interfaces. Our results show the successful encapsulation of nanoparticles, dyes, and proteins with diameters in the 2.4-30 nm range. Further, we show that stable water-in-oil droplets can be generated for various combinations of polymer ligands and nanoparticles bearing complementary functionalities. These NP-surfactant-stabilized microfluidic emulsions would enable applications requiring liquid-liquid interfaces that can adapt and respond to external stimuli and whose mechanical properties can be easily tailored.

Reconfigurable Printed Liquids.

Liquids lack the spatial order required for advanced functionality. Interfacial assemblies of colloids, however, can be used to shape liquids into complex, 3D objects, simultaneously forming 2D layers with novel magnetic, plasmonic, or structural properties. Fully exploiting all-liquid systems that are structured by their interfaces would create a new class of biomimetic, reconfigurable, and responsive materials. Here, printed constructs of water in oil are presented. Both form and function are given to the system by the assembly and jamming of nanoparticle surfactants, formed from the interfacial interaction of nanoparticles and amphiphilic polymers that bear complementary functional groups. These yield dissipative constructs that exhibit a compartmentalized response to chemical cues. Potential applications include biphasic reaction vessels, liquid electronics, novel media for the encapsulation of cells and active matter, and dynamic constructs that both alter, and are altered by, their external environment.

Improved Dielectric Properties of Polyvinylidene Fluoride Nanocomposite Embedded with Poly(vinylpyrrolidone)-Coated Gold Nanoparticles.

A novel nanocomposite dielectric was developed by embedding polyvinylpyrrolidone (PVP)-encapsulated gold (Au) nanoparticles in the polyvinylidene fluoride (PVDF) polymer matrix. The surface functionalization of Au nanoparticles with PVP facilitates favorable interaction between the particle and polymer phase, enhancing nanoparticle dispersion. To study the effect of entropic interactions on particle dispersion, nanocomposites with two different particle sizes (5 and 20 nm in diameter) were synthesized and characterized. A uniform particle distribution was observed for nanocomposite films consisting of 5 nm Au particles, in contrast to the film with 20 nm particles. The frequency-dependent dielectric permittivity and the loss tangent were studied for the nanocomposite films. These results showed the effectiveness of PVP ligand in controlling the agglomeration of Au particles in the PVDF matrix. Moreover, the study showed the effect of particle concentration on their spatial distribution in the polymer matrix and the dielectric properties of nanocomposite films.

Carboxylated Fullerene at the Oil/Water Interface.

The self-assembly of carboxylated fullerene with poly(styrene-b-2-vinylpyridine) (PS-b-P2VP) with different molecular weights, poly-2-vinylpyridine, and amine-terminated polystyrene, at the interface between toluene and water was investigated. For all values of the pH, the functionalized fullerene interacted with the polymers at the water/toluene interface, forming a nanoparticle network, reducing the interfacial tension. At pH values of 4.84 and 7.8, robust, elastic films were formed at the interface, such that hollow tubules could be formed in situ when an aqueous solution of the functionalized fullerene was jetted into a toluene solution of PS-b-P2VP at a pH of 4.84. With variation of the pH, the mechanical properties of the fullerene/polymer assemblies can be varied by tuning the strength of the interactions between the functionalized fullerenes and the PS-b-P2VP.