Photoelastic, microhardness and roughness analysis of zirconia and stainless steel crowns for primary molars.

PURPOSE: To compare the stress distribution through photoelasticity, microhardness and roughness of intact crowns of primary molars (CC) and the preformed crowns of stainless steel (SSC) and zirconia (ZC) used in dental restorations in pediatric dentistry. METHODS: Six healthy primary molars were selected. For the photoelastic models, the teeth were fixed in photoelastic resin. A load of 100 N was applied, and the models were analyzed by transmission polariscope. The Tardy method was used to quantify the fringe order which calculates the maximum stress (T) value in each selected point. The teeth were prepared for cementation of the crowns. The photoelastic test was repeated for each experimental crown. Knoop microhardness was assessed on the buccal surfaces of the CCs, SSCs, and ZCs using a microhardness tester. Parameters were 50 gf for 5 seconds. Roughness was evaluated using a confocal 3-D laser scanning microscope/software at 216x magnification. Roughness average (Ra) values from each model (expressed in µm) were collected and group means were calculated. The stress distribution, microhardness, and roughness data were compared by using one-way ANOVA and the Tukey's test (α= 0.05). RESULTS: There was no difference in the stress distribution for the CCs, SSCs and ZCs. For the microhardness analysis, the ZCs obtained the highest values compared to the CCs and the SSCs (P< 0.001). The CCs were significantly higher than the SSCs (P= 0.027). There was no difference in roughness for the three models (P= 0.615). The SSCs and ZCs showed satisfactory mechanical behavior. CLINICAL SIGNIFICANCE: The use of preformed crowns, especially those made of esthetic materials, is currently increasing in the field of pediatric dentistry. The knowledge of mechanical properties of stainless steel- and zirconia-prefabricated crowns provides scientific foundation for safe clinical application, especially in primary teeth.

Efficacy of CO lasers in preventing dental caries in partially erupted first permanent molars: a randomized 18-month clinical trial.

The aim of this controlled randomized double-blinded clinical trial was to evaluate the use of a CO2 laser with or without topical application of acidulated fluorides in the prevention of dental caries in partially erupted first permanent molars. We selected 61 healthy children at high risk of caries, all between 6 and 8 (7.1 ± 0.8) years of age and with 4 partially erupted first permanent molars. A CO2 laser device emitting at 10.6 µm was used (0.5 W, 0.05 mJ per pulse, 10 kHz). Each first molar in an individual was randomly assigned to one treatment: (L) CO2 laser (0.066 J/cm2); (FL) 1.23% acidulated fluoride gel and CO2 laser (0.066 J/cm2); (V) 5% fluoride varnish, or (S) sealant (control). Patients were followed-up at 3, 6, 12, and 18 months after treatment, through direct visual examination and by an operator blinded to the treatments (kappa ≥ 0.70). The International Caries Detection and Assessment System (ICDAS-II) index was used to assess the soundness of tooth structure or the presence of white spot lesions, cavitated enamel, and/or dentin lesions. The Yildiz Visual Index was used to evaluate sealant retention. Results were evaluated using Kaplan-Meier survival analysis, and the hazard ratio of the treatments was estimated using shared frailty models with a gamma distribution, which considered the patient as a cluster. There were no significant differences among treatments compared to sealants. After 18 months, the use of a CO2 laser with or without acidulated fluorides was shown to be effective in preventing caries on the occlusal surface of partially erupted permanent first molars in children at high risk for caries.

Auriculotherapy in a patient with Arnold Chiari malformation type II: Case report.

AIMS: Auriculotherapy is a therapeutic method of traditional Chinese Medicine in which a stimulus is exerted on the ear and activates energy channels throughout the body, helping to control anxiety, stress, pain, inflammation, illnesses chronic, and possibly can be used in patient with Arnold Chiari Malformation type II who have painful symptoms that are difficult to resolve. Thus, the aim of this article is to present a case in a patient with Chiari Malformation II where auriculotherapy and effect of laser therapy were performed, to relieve symptoms of agitation, anxiety and healing of self-mutilation injuries. CASE REPORT: Data from medical records were used to collect medical and dental history, complaints and treatments performed. Eight sessions of auriculotherapy and one of laser therapy were carried out in order to heal the lesions. The patient presented lower levels of anxiety, agitation and ceased the habit of self-mutilation and, consequently, the pain. CONCLUSIONS: The use of auriculotherapy led to a considerable improvement in the patient's painful condition and reduced anxiety, also benefiting the interaction with her family members and laser therapy promoted wound healing.

Single nucleotide polymorphisms in dopamine receptor D2 are associated with bruxism and its circadian phenotypes in children.

Objective: To evaluate the association of bruxism phenotypes with single nucleotide polymorphisms in FKBP5, DRD2, ANKK1, and COMT.Methods: Clinical oral examination was performed to diagnose bruxism phenotypes in 150 children. DNA was collected from saliva. Logistic univariate regression, Chi-square, and Fisher's exact tests were performed (p < 0.05).Results: Bruxism was associated with DRD2 (p = 0.02). Tooth grinding while awake was associated with ANKK1 (p < 0.001), and tooth grinding while asleep was associated with DRD2 in the additive (p = 0.030) and dominant (p = 0.008) model. Tooth clenching while awake was associated with ANKK1 in the additive (p = 0.005) and dominant (p = 0.008) models, whereas tooth clenching while asleep was associated with ANKK1 (p < 0.001) and with COMT in the additive (p = 0.001) and dominant (p = 0.003) models.Discussion: Polymorphisms in DRD2, ANKK1, and COMT are associated with bruxism phenotypes.

Knowledge, attitudes, and psychosocial impacts among Brazilian Pediatric Dentists during COVID-19 pandemic.

In this study, we evaluated the knowledge, attitudes, and psychosocial impacts among Brazilian pediatric dentists during the COVID-19 pandemic. A cross-sectional study with primary data collection was carried out using an online structured questionnaire. Data were submitted to descriptive analysis by using absolute and relative frequencies. A chi-square test was used for association analysis and log-linear regression models to estimate the prevalence ratio (5%). The population comprised mostly women and knowledge regarding COVID-19 was satisfactory (above 80% in most items). N95 masks and faceshields were used, albeit 64.22% reported difficulty in providing dental care to children due to the need for extra Personal Protective Equipment. Thirty eight percent provided urgency/emergency dental care, 59.78% performed invasive procedures, 59.56% used high speed handpieces, 8.44% started using cariostatics, and 6.22% introduced the use of chemomechanical caries removal agents. Fear for the future (PR = 1.21) and use of medications (for anxiety, depression, or insomnia) increased (PR = 1.16) among the ones who had wage losses. Brazilian pediatric dentists have knowledge about COVID-19, and attitudes in their clinical routines changed due the pandemic. Financial life was harmed and a negative impact of the pandemic in psychosocial aspects of workers was found.

Shear strength of the bond to primary dentin: influence of Er:YAG laser irradiation distance.

The aim of this study was to assess in vitro the influence of Er:YAG laser irradiation distance on the shear strength of the bond between an adhesive restorative system and primary dentin. A total of 60 crowns of primary molars were embedded in acrylic resin and mechanically ground to expose a flat dentin surface and were randomly assigned to six groups (n = 10). The control group was etched with 37% phosphoric acid. The remaining five groups were irradiated (80 mJ, 2 Hz) at different irradiation distances (11, 12, 16, 17 and 20 mm), followed by acid etching. An adhesive agent (Single Bond) was applied to the bonding sites, and resin cylinders (Filtek Z250) were prepared. The shear bond strength tests were performed in a universal testing machine (0.5 mm/min). Data were submitted to statistical analysis using one-way ANOVA and the Kruskal-Wallis test (p<0.05). The mean shear bond strengths were: 7.32 ± 3.83, 5.07 ± 2.62, 6.49 ± 1.64, 7.71 ± 0.66, 7.33 ± 0.02, and 9.65 ± 2.41 MPa in the control group and the groups irradiated at 11, 12, 16, 17, and 20 mm, respectively. The differences between the bond strengths in groups II and IV and between the bond strengths in groups II and VI were statistically significant (p<0.05). Increasing the laser irradiation distance resulted in increasing shear strength of the bond to primary dentin.

Effect of Acid Beverage on the Microhardness of Primary Tooth Enamel In Vitro.

Purpose: To assess the effects of a soft drink, a soybean-based apple juice and strawberry juice on the superficial and deep microhardness of primary tooth enamel.
Methods: Sixty primary teeth were divided according to the beverages and a control group (artificial saliva). Immersion cycles were carried out under agitation (five minutes three times a day over 60 days). Superficial microhardness measurements were taken after seven, 15, 30, 45, and 60 days. Teeth were cut for deep microhardness evaluation. Analysis of variance and Tukey's test (95 percent confidence interval) were used for data analysis. Teeth were scanned by electron microscopy for quantitative analysis.
Results: The soybean drink led to a significant decrease in the superficial microhardness ( P <0.05) at all tested times. The decrease for the strawberry juice was steeper than for the soybean drink and the soft drink significantly decreased the superficial microhardness at all times. The soybean drink recorded lower surface deep microhardness values while the juice presented similar results to the soybean drink at a depth of up to 200 µm. There was a gradual and statistically significant increase at a depth of up to 300 µm with the soft drink. Scanning electron microscopy evaluation showed that all beverages had gradual demineralization, being evident on the 60th day; the soft drink showed the greatest overall loss of enamel.
Conclusion: All beverages affected the microhardness of primary teeth enamel. The soft drink was the most harmful to enamel among the assessed beverages.

Evaluation of Enamel Roughness in Vitro After Orthodontic Bracket Debonding Using Different Methods of Residual Adhesive Removal.

OBJECTIVE: The aim of the present study was to compare different techniques for resin remnant removal (RRR) after orthodontic bracket debonding and to evaluate alterations on the dental enamel caused by these methods. The null hypothesis tested was that there is no difference between RRR techniques in relationship the changes caused on the dental enamel. METHODS: A total of 75 bovine mandibular permanent incisors were used in the study. Brackets were bonded and debonded in each tooth in two experimental regions. Five RRR techniques were used in the experimental groups (n=15): Group 1-diamond bur (6-bladed), Group 2-diamond bur (12-bladed), Group 3-diamond bur (30-bladed), Group 4-aluminum oxide sandblasting (AOS), and Group 5-Er:YAG laser. Enamel surface was evaluated using profilometry, and surface roughness analysis was performed at three time intervals: before bracket bonding, after RRR techniques, and after final polishing. Qualitative analyses of the enamel surfaces were performed using scanning electron microscopy. RESULTS: Multiblade burs showed the best results, and the 30-bladed bur created a less irregular enamel surface. AOS caused greater enamel wear, and Er:YAG laser caused more surface irregularity. CONCLUSION: The null hypothesis was rejected. The multiblade burs were the least harmful than the other techniques. Enamel surface roughness after using the 30-blade bur was similar to the original enamel. These results indicate that the type of bur tested (30-bladed) can be indicated to remove resin remnants after bracket debonding.

Oral Rehabilitation of a Child with Hypohidrotic Ectodermal Dysplasia.

Hypohidrotic ectodermal dysplasia (HED) is a genetic condition characterized by abnormal development of two or more structures of the ectoderm, such as skin, hair, nails, teeth, or sweat glands. The most common dental anomalies are oligodontia and anodontia but taurodontism has also been described. These patients present a decrease of alveolar bone volume and alveolar ridge tapering due to congenitally missing teeth. The purpose of this report is to describe the case of a six-year-old girl diagnosed with HED who presented with conical teeth, taurodontic molars, and multiple agenesis that decreased the patient's self-esteem and social interactions. The proposed treatment was to accomplish an oral rehabilitation that was functional, provided the patient with the ability for correct mastication, good esthetics, and comfort, using restorations and devices that did not interfere with the child's orofacial growth and development. (J Dent Child 2019;86(3):158-63).

Dental findings in Kabuki make-up syndrome: a case report.

This article documents the case history of a 9-year-old Brazilian child diagnosed with Kabuki make-up syndrome (KMS). The clinical features are described, with emphasis on the craniofacial and orodental manifestations. The patient had the distinctive KMS craniofacial features consisting of long palpebral fissure, hypertelorism, high-arched eyebrows with sparse hair in the lateral one-third, eyes with eversion of the lateral one-third of the lower eyelids, long and curved eyelashes, palpebral ptosis, large anteverted prominent ears in a lower position, broad, depressed nasal root with a flat nasal tip, and mild neuropsychomotor developmental deficits. The intraoral examination revealed an anterior open bite, overretention of primary teeth, and a high-arched palate. Two findings in this child have not been previously reported in patients with KMS: the presence of supernumerary teeth and taurodontic teeth in the maxillary arch. The clinical and radiographic detection of these unique dental features may be helpful in identifying children who may have milder forms of KMS.

FT-Raman spectroscopy, µ-EDXRF spectrometry, and microhardness analysis of the dentin of primary and permanent teeth.

The chemical compositions (organic and inorganic contents) and mechanical behaviors of the dentin of permanent and deciduous teeth were analyzed and compared using X-ray fluorescence spectrometry (µ-EDXRF) Fourier transform Raman spectroscopy (FT-Raman) and a microhardness test (HD). Healthy fresh human primary and permanent molars (n = 10) were selected, The buccal surfaces facing upwards were stabilized in an acrylic plate, flattened, polished, and submitted to the µ-EDXRF, FT-Raman, and HD analysis. The results of the analysis were subjected to ANOVAs and Mann-Whitney U/Student's t multiple comparisons tests. The data showed similar values for the dentin of the primary and permanent teeth in P content, organic content (amide I peak), inorganic content ( PO43- - 430 and 590), and microhardness, Nevertheless, Ca content and Ca/P weight ratio were higher, and the CO32- peak was lower in the dentin of the permanent teeth compared to primary teeth. It be concluded that despite permanent teeth showed more Ca element, both substrates showed similar behavior of chemical and physical properties.

Influência do autocuidado utilizando as práticas integrativas e complementares durante a pandemia da COVID-19 em crianças e adolescentes de 4 a 13 anos com bruxismo e disfunção temporomandibular / Influence of self-care using complementary and integrative therapies during the COVID-19 pandemic in children and adolescents aged 4 to 13 years with bruxism and temporomandibular disorders

O Bruxismo é um comportamento da musculatura mandibular, caracterizado pelo apertamento e/ou rangimento dental, tanto em estado de vigília quanto no sono, que pode acarretar na Disfunção Temporomandibular (DTM). Altamente prevalente em crianças e etiologia multifatorial, destacam-se os aspectos psicossociais, principalmente o estresse e ansiedade. A necessidade de distanciamento social durante a pandemia da COVID-19 trouxe consequências para as crianças e fez surgir novos formatos de ações na Odontologia. Esse estudo avaliou a influência do autocuidado nas manifestações do Bruxismo/DTM em crianças que estavam em tratamento, antes da pandemia, no Serviço de Atendimento de Bruxismo e DTM na Infância (SABDI) da FORP/USP, por meio de intervenções assistidas, implementadas remotamente, de Práticas Integrativas e Complementares (PICs). Previamente às intervenções (T0), os pais responderam o questionário (Q1) sobre a criança (no formato Google Forms, enviado por WhatsApp e e-mail). As práticas propostas foram explicadas em reuniões virtuais (Google Meet) e foram realizadas durante 21 dias, registradas em um "Diário de Controle". Um novo questionário (Q2) foi preenchido para análise comparativa após as intervenções (T1). Das 37 crianças que estavam em tratamento, a amostra final das 18 que concluíram todas as etapas propostas apresentou diferença quantitativa nos itens: "dor na boca/rosto quando mastiga"; "dor ou dificuldade de abrir e fechar a boca"; "acorda com dor no rosto ou dor de cabeça" e, "dor de cabeça durante o dia ou à noite", "range os dentes em vigília"; "frequência que range os dentes em vigília"; "range os dentes enquanto dorme" e, "frequência que range os dentes enquanto dorme", "sono agitado"; "pesadelo" e "insônia". Observou-se evidência de diferença estatística com valor P<0,05, no item "aperta os dentes em vigília" (p=0,0057). Conclui-se que as intervenções propostas influenciaram as manifestações do Bruxismo favorecendo o seu controle.

Bruxism is a behavior of the mandibular muscles, characterized by clenching and/or dental grinding, both in wakefulness and in sleep, which can lead to Temporomandibular Disorders (TMD). Highly prevalent in children and possessing a multifactorial etiology, psychosocial aspects stand out, especially stress and anxiety. The need for social distancing during the COVID-19 pandemic has had consequences for children and has given rise to new formats of actions in Dentistry. This study evaluated the influence of self-care on the manifestations of Bruxism/TMD in children who were undergoing treatment, before the pandemic, Care Center for children with Bruxism and TMD, whose acronyms in Portuguese is SABDI, located in Ribeirão Preto School of Dentistry (FORP-USP), through assisted interventions, implemented remotely, of Complementary and Integrative Therapies (CIT). Prior to the interventions (T0), the parents answered the questionnaire (Q1) about the child (in Google Forms, sent by WhatsApp and e-mail). The proposed practices were explained in virtual meetings (Google Meet) and performed for 21 days and recorded in a "Control Diary". A new questionnaire (Q2) was completed for comparative analysis after the interventions (T1). Of the 37 children who were undergoing treatment, the final sample of 18 who completed all the proposed steps showed a quantitative difference in the items: "pain in the mouth/face when chewing"; "pain or difficulty opening and closing the mouth"; "waking up with pain in the face or headache" and "headache during the day or night"; "grinding teeth while awake"; "frequency grinding teeth while awake"; "grinding teeth while sleeping"; "frequency grinding teeth while sleeping"; "restless sleep"; "nightmare"; and "insomnia". Evidence of statistical difference was observed with a P value <0.05, in the item "clenches teeth while awake" (p=0.0057). It is concluded that the proposed interventions influenced the manifestations of Bruxism, favoring its control.

Adhesion of a sealant with pre-reacted glass ionomer particles under salivary contamination: an in vitro study

Objective: this in vitro study compared the adhesive strengths of the resin sealant with the Giomer technology sealant under salivary contamination. Materials and Methods: fifty-two bovine incisors were randomly divided into four groups (n=13): GI, a resin sealant (Fluroshield®) without salivary contamination (control of GII); GII, Fluroshield sealant + salivary contamination; GIII, a Giomer technology sealant (BeautiSealant®) without salivary contamination (control of GIV); and GIV, BeautiSealant® sealant + salivary contamination. In the salivary contamination groups, artificial saliva was used through a pipette, and after 20 s, it was air-dried and the sealant was applied. Shear strength tests were performed using a universal testing machine. One-way ANOVA variance and Tukey's test were used for multiple comparisons. The fracture types were analyzed using a stereomicroscope with 40X magnification. Results: the means and standard deviations (SD) of adhesion for Fluroshield® and BeautiSealant® in the group without salivary contamination were 15.27 (±0.96) and 11.90 (±0.94), and for the group with salivary contamination, 13.14 (±1.03) and 8.95 (±1.33), respectively, indicating a statistically significant difference between GI and GII p=0.020, GIII and GIV p=0.041. Mixed failures were detected in GI (38%), GII (44%), GIII (38%), and GIV (62%). Conclusion: there was a statistically significant decrease in the adhesive strength values in the groups with salivary contamination for both the sealants studied. However, no significant difference was observed between the two sealants when the materials used were compared.

Objetivo: este estudo in vitro comparou as forças adesivas do selante resinoso com o selante da tecnologia Giomer sob contaminação salivar. Materiais e Métodos: cinquenta e dois incisivos bovinos foram divididos aleatoriamente em quatro grupos (n=13): GI, um selante resinoso (Fluroshield®) sem contaminação salivar (controle do GII); GII, selante Fluroshield + contaminação salivar; GIII, um selante com tecnologia Giomer (BeautiSealant®) sem contaminação salivar (controle do GIV); e GIV, selante BeautiSealant® + contaminação salivar. Nos grupos de contaminação salivar, a saliva artificial foi utilizada por meio de uma pipeta e, após 20 s, foi seca ao ar e aplicado o selante. Os testes de resistência ao cisalhamento foram realizados usando uma máquina de teste universal. A variância ANOVA de uma via e o teste de Tukey foram usados para comparações múltiplas. Os tipos de fratura foram analisados em estereomicroscópio com aumento de 40X. Resultados: as médias e desvios padrão (DP) de adesão para Fluroshield® e BeautiSealant® no grupo sem contaminação salivar foram 15,27 (±0,96) e 11,90 (±0,94), e após contaminação salivar foram 13,14 (±1,03) e 8,95 (±1,33), respectivamente, indicando haver diferença estatisticamente significante entre GI e GII p=0.020, GIII e GIV p=0.041. Falhas mistas foram detectadas em GI (38%), GII (44%), GIII (38%) e GIV (62%). Conclusão: houve diminuição estatisticamente significativa dos valores de resistência adesiva nos grupos com contaminação salivar para ambos os selantes estudados. No entanto, não foi observada diferença significativa entre os dois selantes quando comparados os materiais utilizados.

Knowledge, attitudes, and psychosocial impacts among Brazilian Pediatric Dentists during COVID-19 pandemic

Abstract: In this study, we evaluated the knowledge, attitudes, and psychosocial impacts among Brazilian pediatric dentists during the COVID-19 pandemic. A cross-sectional study with primary data collection was carried out using an online structured questionnaire. Data were submitted to descriptive analysis by using absolute and relative frequencies. A chi-square test was used for association analysis and log-linear regression models to estimate the prevalence ratio (5%). The population comprised mostly women and knowledge regarding COVID-19 was satisfactory (above 80% in most items). N95 masks and faceshields were used, albeit 64.22% reported difficulty in providing dental care to children due to the need for extra Personal Protective Equipment. Thirty eight percent provided urgency/emergency dental care, 59.78% performed invasive procedures, 59.56% used high speed handpieces, 8.44% started using cariostatics, and 6.22% introduced the use of chemomechanical caries removal agents. Fear for the future (PR = 1.21) and use of medications (for anxiety, depression, or insomnia) increased (PR = 1.16) among the ones who had wage losses. Brazilian pediatric dentists have knowledge about COVID-19, and attitudes in their clinical routines changed due the pandemic. Financial life was harmed and a negative impact of the pandemic in psychosocial aspects of workers was found.

Effect of Saliva/Blood Contamination on Enamel Bond Strength / Efeito da Contaminação de Saliva/Sangue na Força de União ao Esmalte

Abstract In the routine clinical situation, the contamination by blood and/or saliva in restorative procedures can be happen in non-cooperation of the patient in dental office. The aim of the study was to assess in vitro shear bond strength of a resin sealant associated with two types of adhesives contaminated with saliva and blood. Healthy human molars were used and the specimens and the crowns were sectioned in the bucco-lingual direction, thus obtaining two segments of similar proportions (mesial and distal), totaling 60 surfaces, and the surfaces were randomly divided into 4 groups (n = 15). Group I (control) received no type of contamination and the sealant was applied. In group II, the surfaces were contaminated with 10 µl of saliva/blood and the sealant was applied. In group III, the surfaces were contaminated with 10 µl of saliva/blood and the Single Bond total-etch adhesive system was applied followed by application of sealant. In group IV, the surfaces were contaminated with 10 µl of saliva/blood and the Prime & Bond NT total-etch adhesive system was applied followed by the application of sealant. Samples were tested in the universal testing machine and the analysis of shear bond strength was performed. A difference between Group I (12.61MPa) and the other groups was found; Group II (2. 28MPa) was different than Groups III (7.07MPa) and IV (7.79MPa), but Groups III and IV were similar. The application of an adhesive system when there is contamination with saliva/blood is required prior to application of pit and fissure sealants. (AU)

Resumo Na situação clínica de rotina, a contaminação por sangue e/ou saliva em procedimentos restauradores pode ocorrer em pacientes que não colaboram no consultório odontológico. O objetivo do estudo foi avaliar a resistência ao cisalhamento in vitro de um selante de resina associado a dois tipos de adesivos contaminados com saliva e sangue. Foram utilizados molares humanos saudáveis e os espécimes e as coroas foram seccionados na direção bucal-lingual, obtendo assim dois segmentos de proporções semelhantes (mesial e distal), totalizando 60 superfícies, e as superfícies foram divididas aleatoriamente em 4 grupos (n = 15). O Grupo I (controle) não recebeu nenhum tipo de contaminação e o selante foi aplicado. No grupo II, as superfícies foram contaminadas com 10 µl de saliva / sangue e o selante foi aplicado. No grupo III, as superfícies foram contaminadas com 10 µl de saliva / sangue e o sistema adesivo Single-Bond foi aplicado seguindo a aplicação de selante. No grupo IV, as superfícies foram contaminadas com 10 µl de saliva / sangue e o sistema adesivo de ataque total Prime & Bond NT foi aplicado seguido da aplicação de vedante. As amostras foram testadas na máquina de ensaio universal e a análise da resistência à ligação ao cisalhamento foi realizada. Uma diferença entre o Grupo I (12,61MPa) e os outros grupos foi encontrada; O Grupo II (2,28 MPa) foi diferente dos Grupos III (7,07MPa) e IV (7,79 MPa), mas os Grupos III e IV foram semelhantes. A aplicação de um sistema adesivo quando existe contaminação com saliva / sangue é necessária antes da aplicação de selantes de fissura e fissura.

Tensile bond strength of self-etching adhesive systems to primary dentin.

PURPOSE: To assess in vitro the bond strength of three self-etching adhesive systems to primary teeth dentin. METHODS: Fifteen crowns of primary molars were sectioned mesiodistally and embedded in acrylic resin (n=30). Dentin was exposed and the specimens were randomly assigned in groups (n=10): (1) Clearfil SE Bond; (2) Prime & Bond NT/NRC; and (3) One Up Bond F. A 3 mm-diameter dentin bonding site was demarcated, the adhesive systems were applied and resin composite cones were bonded. After 24 hours in distilled water, tensile bond strength was tested to failure (0.5 mm/minute). Data were submitted to statistical analysis using one-way ANOVA and Scheffé test. RESULTS: Means were (MPa): (1) 16.60 (+/- 4.10); (2) 8.48 (+/- 4.51); and (3) 6.75 (+/- 1.26). CSE Bond yielded significantly higher bond strengths (P < 0.05). Prime & Bond NT/NRC and One Up Bond F means were markedly low and no statistically significant difference was observed between them.

Cri du Chat syndrome: a case report.

Cri du Chat Syndrome occurs as a result of a partial deletion in the short arm of chromosome 5. Among the consequent abnormalities are low birth weight, a striking catlike cry in infancy, mental retardation, epicanthal folds, hypertelorism and dental malocclusions. This paper presents a case report on the dental treatment of a 23-year-old patient who received multidisciplinary treatment, including special education and precocious stimulation for carriers of this syndrome.

Shear bond strength of pit-and-fissure sealants to saliva-contaminated and noncontaminated enamel.

PURPOSE: The purpose of this study was to investigate the shear bond strength of 2 resin-based pit-and-fissure sealants--Clinpro and Fluroshield--to saliva-contaminated and noncontaminated enamel. METHODS: Forty buccal halves of permanent molar crowns were individually embedded in polyester resin and ground with wet silicone carbide papers to obtain flat enamel surfaces. The specimens were randomly assigned to 2 groups: (A) without contamination; and (B) contaminated with 0.01 ml of fresh human saliva. Each group was divided into 2 subgroups (N=10), according to the sealant applied: (1) Clinpro; and (2) Fluroshield. Shear bond strength was tested at a crosshead speed of 0.5 mm/min. Failure mode was assessed. RESULTS: Means (MPa) were: (1) A1=7.66 +/- 3.12; A2=12.39 +/- 4.34; (2) B1=5.05 +/- 1.44; B2=10.44 +/- 2.35. Data were submitted to analysis of variance and Scheffé's statistical test (P<.05). There was a statistically significant difference (P<.05) between both the sealants and the experimental conditions analyzed. Fluroshield provided higher bond strength and was different from Clinpro (P<.05) in the absence of contamination. Within the saliva-contaminated group, however, no statistically significant difference (P>.05) was observed between the tested materials. CONCLUSIONS: It may be concluded that, under dry conditions, the filled pit-and-fissure sealant (Fluroshield) yielded better bonding performance. Salivary contamination undermined the adhesion of both materials to enamel and resulted in lower bond strengths.

Effect of individual or simultaneous curing on sealant bond strength.

PURPOSE: The objective of this study was to assess the shear bond strength of resin sealants to saliva-contaminated and noncontaminated enamel, comparing 2 curing protocols: (1) individual light-curing of the intermediate bonding agent layer and the sealant; or (2) simultaneous curing of both materials. METHODS: Seventy-two enamel test surfaces were obtained from 24 third molars and randomly assigned to 2 groups (N=36): (A) saliva-contaminated; (B) noncontaminated. Each group was divided into 3 subgroups, according to the bonding technique: (1) Prime&Bond and Fluroshield were light cured separately; (2) Prime&Bond and Fluroshield were light cured together; (3) Fluroshield was applied alone. Shear bond strength was tested at a crosshead speed of 0.5 mm/minute. RESULTS: Means (MPa) were: IA-15.61(+/-4.74); IIA-15.71(+/-6.18); IIIA-13.83(+/-1.50); IB-24.73(+/-4.34); IIB-22.41(+/-4.16); IIIB-18.20(+/-3.58). Statistical analysis revealed that overall bond strength to saliva-contaminated enamel was remarkably lower (P < .05) than that recorded under dry conditions. In both contaminated and noncontaminated groups, significantly higher shear bond strength (P < .05) was observed when the bonding agent was applied underneath the sealant. Comparing the curing protocols for contaminated specimens, no statistically significant difference (P > .05) was observed between individual and simultaneous curing. Conversely, for noncontaminated specimens, bond strength was higher and statistically different (P < .05) when the materials were light cured separately. CONCLUSIONS: Individual or simultaneous curing of the intermediate bonding agent layer and the resin sealant does not seem to affect bond strength to saliva-contaminated enamel. When dry, noncontaminated conditions are maintained, however, the intermediary and the sealing materials should preferably be light cured separately.

Oral findings and dental treatment in a child with Williams-Beuren syndrome.

Williams-Beuren syndrome (WBS), also known as Williams syndrome, is a rare congenital disorder involving cardiovascular problems, mental retardation, distinctive facial features and tooth anomalies. It is caused by the submicroscopic deletion of 1.5 to 1.8 Mb on chromosome 7q11.23. This paper reports the dental care to a 7-year-old child with WBS syndrome. The interview also revealed visual impairment, sensorineural hearing loss, hyperacusis, photophobia and hoarse voice. The intraoral clinical examination showed anterior open bite, tongue thrusting, excessive interdental spacing, enamel hypomineralization of the incisors, hypoplasia and caries lesions. The dental treatment included: modulating sessions to control aversion to noises, the photophobia, and the dental fear and anxiety because of his reduced visual acuity; oral hygiene instructions, dietary and daily use of a 0.05% sodium fluoride mouthwash; the permanent mandibular left first molar was treated endodontically, and maxillary and mandibular first molars were restored with amalgam. Due to the patient's heart defect, a prophylactic antibiotic regimen was prescribed prior to the dental procedures. This patient has been followed up for 4 years and this case report underscores the importance of early dental evaluation and counseling for parents of WBS patients.