RESUMEN
PURPOSE: To evaluate the health-related quality of life and associated risk factors for Multiple Osteochondromas patients. METHODS: A cross-sectional, observational study was conducted from May to December 2022 during the routine visit to the referral center for rare skeletal disorders. All patients with Multiple Osteochondromas aged ≥ 3 years were included. EuroQol 5-dimension questionnaires, and demographic, clinical, and surgical history data were collected. Descriptive statistics, Fisher's exact test, One-sample t-test, Spearman's correlation, and multiple linear and logistic regression were performed to analyze the data. Results are reported following STROBE guidelines. RESULTS: A total of 128 patients were included in the study, with a mean age of 14 [SD, 10] years. The mean EQ-5D Index Value was 0.863 [SD, 0.200] and the EQ-VAS was 84 [SD, 19] with a positive correlation between two scores [r = 0.541, p < 0.001]. Patients frequently referred problems in pain/discomfort [78.8%], anxiety/depression [50%], and usual activities [38.8%] dimensions. Increasing age was the common risk factor for health-related quality of life [p < 0.000], as well as Index Value and VAS scores were significantly lower in surgical patients [p = 0.001 and p < 0.001, respectively]. CONCLUSION: Increasing age and surgical procedures were found highly associated with reduced health-related quality of life in Multiple Osteochondromas patients. Our findings provide relevant information to support the establishment of patient-centered healthcare pathways and pave the way for further research into medical and non-medical therapeutic strategies for these patients.
Asunto(s)
Calidad de Vida , Humanos , Estudios Transversales , Masculino , Femenino , Factores de Riesgo , Adolescente , Encuestas y Cuestionarios , Adulto , Adulto Joven , Niño , Exostosis Múltiple Hereditaria/psicología , Preescolar , Persona de Mediana EdadRESUMEN
Background: Infantile tibia vara (ITV) is a rare proximal tibia deformity in infancy, leading to progressive knee varus. High tibial osteotomy is commonly practiced but has high recurrence rates. This study analyzed factors affecting treatment failure and recurrence in children undergoing opening-wedge high tibial osteotomy (OWHTO) for ITV. Methods: We retrospectively studied children with ITV who had OWHTO with a press-fit cancellous bone allograft between 2000 and 2020, with ≥2-year follow-up. Outcomes included recurrence (knee varus with tibiofemoral angle > 10°), complications, and reintervention. Results: We analyzed 39 knees in 29 patients (mean age: 4.8 ± 1.9 years; median follow-up: 7.4 years). Recurrence occurred in 22 cases (56%). Age at surgery significantly influenced recurrence, with rates of 16% before age 5 versus 95% later (hazard ratio: 12.0, p = 0.001). Langenskiöld stage also affected recurrence (ß-coefficient: 2.7, 95% C.I. 1.0-4.5, p = 0.002; pseudo-R-squared: 0.50, p = 0.001), with recurrence in all stage IV or higher cases. Conclusions: Early diagnosis and treatment before age 5, ideally with Langenskiöld stage III or lower, are crucial for stable correction with OWHTO alone. Late, high-grade ITV may require combined, acute or gradual, and/or staged correction. Further evidence is needed for optimal management.
RESUMEN
(1) Background: Orthopedic surgery has been transformed by 3D-printed personalized instruments (3DP-PSIs), which enhance precision and reduce complications. Hospitals are adopting in-house 3D printing facilities, using cost-effective methods like Fused Deposition Modeling (FDM) with materials like Polylactic acid (PLA) to create 3DP-PSI. PLA's temperature limitations can be overcome by annealing High-Temperature PLA (ann-HTPLA), enabling steam sterilization without compromising properties. Our study examines the in vivo efficacy of ann-HTPLA 3DP-PSI in pediatric orthopedic surgery. (2) Methods: we investigated safety and efficacy using ann-HTPLA 3DP-PSI produced at an "in-office" 3D-printing Point-of-Care (3DP-PoC) aimed at correcting limb deformities in pediatric patients. Data on 3DP-PSI dimensions and printing parameters were collected, along with usability and complications. (3) Results: Eighty-three ann-HTPLA 3DP-PSIs were utilized in 33 patients (47 bone segments). The smallest guide used measured 3.8 cm3, and the largest measured 58.8 cm3. Seventy-nine PSIs (95.2%; 95% C.I.: 88.1-98.7%) demonstrated effective use without issues. Out of 47 procedures, 11 had complications, including 2 infections (4.3%; 95% CI: 0.5-14.5%). Intraoperative use of 3DP-PSIs did not significantly increase infection rates or other complications. (4) Conclusions: ann-HTPLA has proven satisfactory usability and safety as a suitable material for producing 3DP-PSI in an "in-office" 3DP-PoC.
RESUMEN
BACKGROUND: Guided-growth modulation is a first-line treatment widely adopted to correct lower-limb angular deformities and limb-length discrepancies (LLD) in the paediatric population. METHODS: We conducted a retrospective study to evaluate the safety and performance of a new construct (8-Plate Plus or Guided-Growth Plate System Plus, Orthofix S.r.l) used to correct angular deformities and LLD in non-skeletally mature children. The primary endpoint was safety (from plate implantation to removal). The secondary endpoint was performance; patients treated for LLD achieved complete correction if a pre- and post-surgery difference of <0 was observed; angular deformities performance was measured in terms of IMD, ICD, mMPTA, and mLDFA. RESULTS: We performed 69 procedures in 41 patients. A total of 10 patients had an LLD, and 31 had an angular deformity. We observed nine minor complications in the hemiepiphysiodesis group. One patient experienced rebound. All 10 LLD patient treatments were successful. A total of 30/31 patients with an angular deformity had a successful treatment; the remaining patient had a partial correction. CONCLUSIONS: Guided-growth by temporary epiphysiodesis or hemiepiphysiodesis was safe and effective for angular deformities and limb-length discrepancies. Further prospective and/or randomized controlled trial studies assessing more significant cohorts of patients and a comparison group could add evidence to our findings.
RESUMEN
Introduction: The present study aims to describe a large cohort of Italian patients affected by osteogenesis imperfecta, providing a picture of the clinical bony and non-bony features and the molecular background to improve knowledge of the disease to inform appropriate management in clinical practice. Methods: A total of 568 subjects (from 446 unrelated Italian families) affected by osteogenesis imperfecta who received outpatient care at Istituto Ortopedico Rizzoli from 2006 to 2021 were considered in the present study. Results: Skeletal and extraskeletal features were analyzed showing a lower height (mean z-scores equal to -1.54 for male patients and -1.47 for female patients) compared with the general Italian population. Half of the patient population showed one or more deformities, and most of the patients had suffered a relatively low number of fractures (<10). An alteration in the sclera color was identified in 447 patients. Similarly, several extraskeletal features, like deafness, dental abnormalities, and cardiac problems, were investigated. Additionally, inheritance and genetic background were evaluated, showing that most of the patients have a positive family history and the majority of pathogenic variants detected were on collagen genes, as per literature. Conclusion: This study supports the definition of a clear picture of the heterogeneous clinical manifestations leading to variable severity in terms of skeletal and extra-skeletal traits and of the genetic background of an Italian population of osteogenesis imperfecta patients. In this perspective, this clearly highlights the crucial role of standardized and structured collection of high-quality data in disease registries particularly in rare disease scenarios, helping clinicians in disease monitoring and follow-up to improve clinical practice.
Asunto(s)
Fracturas Óseas , Osteogénesis Imperfecta , Humanos , Masculino , Femenino , Osteogénesis Imperfecta/patología , Estudios Transversales , Fracturas Óseas/epidemiología , Fenotipo , Italia/epidemiologíaRESUMEN
(1) Background: Virtual reality and 3D printing are transforming orthopedic surgery by enabling personalized three-dimensional (3D) models for surgical planning and Patient-Specific Instruments (PSIs). Hospitals are establishing in-house 3D printing centers to reduce costs and improve patient care. Pediatric orthopedic surgery also benefits from these technologies, enhancing the precision and personalization of treatments. This study presents preliminary results of an In-Office 3D Printing Point of Care (PoC), outlining considerations and challenges in using this program for treating lower limb deformities in pediatric patients through Virtual Surgical Planning (VSP) and 3D-printed Patient-Specific Instruments (PSIs). (2) Materials and Methods: Pediatric patients with congenital or acquired lower limb deformities undergoing surgical correction based on VSP, incorporating 3D-printed PSIs when required, were included in this study. The entire process of VSP and 3D printing at the In-Office PoC was illustrated. Data about deformity characteristics, surgical procedures, and outcomes, including the accuracy of angular correction, surgical times, and complications, were reported. (3) Results: In total, 39 bone correction procedures in 29 patients with a mean age of 11.6 ± 4.7 years (range 3.1-18.5 years) were performed according to VSP. Among them, 23 procedures were accomplished with PSIs. Surgeries with PSIs were 45 min shorter, with fewer fluoroscopy shots. Optimal correction was achieved in 37% of procedures, while the remaining cases showed under-corrections (41%) or over-corrections (22%). Major complications were observed in four patients (13.8%). (4) Conclusions: The In-Office 3D Printing Point of Care is becoming an essential tool for planning and executing complex corrections of lower limb deformities, but additional research is needed for optimizing the prediction and accuracy of the achieved corrections.
RESUMEN
Background and Objective: The discoid lateral meniscus (DLM) is a congenital abnormality of the meniscal shape, characterized by a typical central hypertrophy and a diameter larger than a regular meniscus, potentially leading to knee pain and symptoms, especially in children. The present study provides an update and a general review of this uncommon meniscal pathology. The incidence of discoid meniscus is about 0.4-17% for the lateral and 0.1-0.3% for the medial, although, being often asymptomatic, the true prevalence is unknown. We aim to enhance awareness on this subject to medical care provider. Methods: A literature search was performed on PubMed, including articles written in English until October 2021. Key Content and Findings: The articles regarding etiology, diagnosis and management of DLM in children or in patients younger than 18 years were reviewed using the narrative approach. Conclusions: Recent literature has shown that DLM is one of the most frequent congenital anomalies of the knee encountered during childhood. While asymptomatic children with incidental finding can be managed nonoperatively, symptomatic painful DLM should be addressed surgically, restoring typical anatomy using saucerization, tear repair, and stable fixation of the meniscus. The risk of osteoarthritis progression seems to be higher in children with operated DLM, imposing prolonged follow-up and cartilage preserving strategies for these patients.