Nanocellulose-Based Hybrid Scaffolds for Skin and Bone Tissue Engineering: A 10-Year Overview.

Cellulose, the most abundant polymer on Earth, has been widely utilized in its nanoform due to its excellent properties, finding applications across various scientific fields. As the demand for nanocellulose continues to rise and its ease of use becomes apparent, there has been a significant increase in research publications centered on this biomaterial. Nanocellulose, in its different forms, has shown tremendous promise as a tissue engineered scaffold for regeneration and repair. Particularly, nanocellulose-based composites and scaffolds have emerged as highly demanding materials for both soft and hard tissue engineering. Medical practitioners have traditionally relied on collagen and its analogue, gelatin, for treating tissue damage. However, the limited mechanical strength of these biopolymers restricts their direct use in various applications. This issue can be overcome by making hybrids of these biopolymers with nanocellulose. This review presents a comprehensive analysis of the recent and most relevant publications focusing on hybrid composites of collagen and gelatin with a specific emphasis on their combination with nanocellulose. While bone and skin tissue engineering represents two areas where a majority of researchers are concentrating their efforts, this review highlights the use of nanocellulose-based hybrids in these contexts.

Co-metabolic degradation and metabolite detection of hexabromocyclododecane by Shewanella oneidensis MR-1.

Hexabromocyclododecane (HBCD) is a widely used brominated flame retardant; however, it is a persistent organic pollutant as well as affects the human thyroid hormones and causes cancer. However, the degradation of HBCD has received little attention from researchers. Due to its bioaccumulative and hazardous properties, an appropriate strategy for its remediation is required. In this study, we investigated the biodegradation of HBCD using Shewanella oneidensis MR-1 under optimized conditions. The Box-Behnken design (BBD) was implemented for the optimization of the physical degradation parameters of HBCD. S. oneidensis MR-1 showed the best degradation performance at a temperature of 30 °C, pH 7, and agitation speed of 115 rpm, with an HBCD concentration of 1125 µg/L in mineral salt medium (MSM). The strain tolerated up to 2000 µg/L HBCD. Gas chromatography-mass spectrometry analysis identified three intermediates, including 2-bromo dodecane, 2,7,10-trimethyldodecane, and 4-methyl-1-decene. The results provide an insightful understanding of the biodegradation of HBCD by S. oneidensis MR-1 under optimized conditions and could pave the way for further eco-friendly applications. KEY POINTS: • HBCD biodegradation by Shewanella oneidensis • Optimization of HBCD biodegradation by the Box-Behnken analysis • Identification of useful metabolites from HBCD degradation.

Microbial host engineering for sustainable isobutanol production from renewable resources.

Due to the limited resources and environmental problems associated with fossil fuels, there is a growing interest in utilizing renewable resources for the production of biofuels through microbial fermentation. Isobutanol is a promising biofuel that could potentially replace gasoline. However, its production efficiency is currently limited by the use of naturally isolated microorganisms. These naturally isolated microorganisms often encounter problems such as a limited range of substrates, low tolerance to solvents or inhibitors, feedback inhibition, and an imbalanced redox state. This makes it difficult to improve their production efficiency through traditional process optimization methods. Fortunately, recent advancements in genetic engineering technologies have made it possible to enhance microbial hosts for the increased production of isobutanol from renewable resources. This review provides a summary of the strategies and synthetic biology approaches that have been employed in the past few years to improve naturally isolated or non-natural microbial hosts for the enhanced production of isobutanol by utilizing different renewable resources. Furthermore, it also discusses the challenges that are faced by engineered microbial hosts and presents future perspectives to enhancing isobutanol production. KEY POINTS: • Promising potential of isobutanol to replace gasoline • Engineering of native and non-native microbial host for isobutanol production • Challenges and opportunities for enhanced isobutanol production.

Nanoparticle-Mediated Mucosal Vaccination: Harnessing Nucleic Acids for Immune Enhancement.

Recent advancements in in vitro transcribed mRNA (IVT-mRNA) vaccine manufacturing have attracted considerable interest as advanced methods for combating viral infections. The respiratory mucosa is a primary target for pathogen attack, but traditional intramuscular vaccines are not effective in generating protective ion mucosal surfaces. Mucosal immunization can induce both systemic and mucosal immunity by effectively eliminating microorganisms before their growth and development. However, there are several biological and physical obstacles to the administration of genetic payloads, such as IVT-mRNA and DNA, to the pulmonary and nasal mucosa. Nucleic acid vaccine nanocarriers should effectively protect and load genetic payloads to overcome barriers i.e., biological and physical, at the mucosal sites. This may aid in the transfection of specific antigens, epithelial cells, and incorporation of adjuvants. In this review, we address strategies for delivering genetic payloads, such as nucleic acid vaccines, that have been studied in the past and their potential applications.

Fungi from the extremes of life: an untapped treasure for bioactive compounds.

More than 80% of the Earth surface is consisted of hostile and harsh environments, classified as extreme from an anthropogenic perspective. Microorganisms with acclimatized nature dominate these extreme ecosystems of the biosphere. Survivals in such environments initiate an inductive force leading to the production of noteworthy metabolites having peculiar biochemistry. Recent investigations on extremophilic fungi for unprecedented bioactive compounds emphasize their remarkable potential as sources of new therapeutics. The present review covers the literature published in the last 15 years and highlights the biological activities and structure of compounds isolated from the extremophilic fungi. The compounds are grouped based on their biological functions such as cytotoxicity, lipid-lowering ability, and antimicrobial, antioxidant, nematocidal, anti-inflammatory, anti-malarial, and antifouling activities. A total of 155 compounds isolated from 25 Penicillium species, 16 Aspergillus species, and 23 other species are presented, which include 105 new and 50 known bioactive compounds. Out of these, 77 have known cytotoxic activity and 46 are antimicrobial in nature, while there are 32 other compounds with different activities including nematocidal, anti-allergic, antioxidant, and anti-inflammatory. KEY POINTS: • A broad compilation of bioactive compounds from extremophilic fungi. • Classification of bioactive compounds based on their biological functions. • Production of cytotoxic compounds is common among all kind of extremophilic fungi. • Bioactive compounds have no direct role in adaptation process of extremophiles.

Encapsulation of E. coli in biomimetic and Fe3O4-doped hydrogel: structural and viability analyses.

The current study reports the modification of prokaryotic microorganism through a single-layer technique by using different polyanions/cations and doping with magnetic (Fe3O4) nanoparticles. Briefly, individual Escherichia coli cells were encapsulated through deposition of 1% sodium alginate as first layer followed by depositing precipitate layers of calcium chloride, disodium hydrogen phosphate, and Fe3O4 nanoparticles. Surface and cross sectional analysis of modified E. coli cells by field emission scanning electron microscope (FE-SEM) confirmed the synthesis of varying sizes of artificial shells around the microbial cells while the deposition of Fe3O4 nanoparticles was confirmed by transmission electron microscope (TEM). Thermogravimetric analysis (TGA) showed the deposition of 58 wt% of Fe3O4 nanoparticles on E. coli cell surface. Chemical structure analysis by Fourier transform infrared (FTIR) spectroscopy confirmed the presence of characteristic functional groups of deposited reagents in the hydrogel capsule. Zeta potential analysis of hydrogel capsule showed moderate stability with a surface charge of - 21 mV. Growth and viability analysis by Alamar Blue assay indicated marked increase in the reduction of resazurin blue (> 100%) by the modified E. coli indicating their viability. The movement and control of magnetized E. coli cells were manipulated using external permanent magnetic field as observed with optical microscope images. The surface-modified cells can find potential applications in bioremediation, biodegradation, and catalysis and can be used as biosorbents.

Production, characterization and biological features of bacterial cellulose from scum obtained during preparation of sugarcane jaggery (gur).

Bacterial cellulose (BC) has been given an ample attention due to its high potential for many industrial applications. However, the high cost of production medium has hindered the commercialization of BC. Several efforts have been made to explore cheep, raw and waste sources for BC production. The current study aims at investigating the BC production from a waste source; the scum obtained during preparation of sugarcane jaggery or gur (JS). JS was five-fold diluted with distilled water and used as culturing medium without any additional nutrients. The production of BC was monitored till 10th days of cultivation both at static and shaking culturing conditions. A maximum of 2.51 g/L and 2.13 g/L BC was produced in shaking and static cultures, respectively, after 10 days. The structure features of BC were confirmed through FTIR, XRD and SEM analysis. The chemical structure and physical appearance strongly resembled the BC produced form synthetic media. It was noteworthy that the BC produced from JS showed higher mechanical and thermal properties. The cell adhesion and proliferation capabilities of produced BC were observed that depicted definite animal cell adhesion without any considerable cytotoxicity. Besides providing an economically feasible way for BC production, the high level of physico-mechanical and biological properties insured the importance in medical fields.

Developmental strategies and regulation of cell-free enzyme system for ethanol production: a molecular prospective.

Most biomanufacturing systems developed for the production of biocommodities are based on whole-cell systems. However, with the advent of innovative technologies, the focus has shifted from whole-cell towards cell-free enzyme system. Since more than a century, researchers are using the cell-free extract containing the required enzymes and their respective cofactors in order to study the fundamental aspects of biological systems, particularly fermentation. Although yeast cell-free enzyme system is known since long ago, it is rarely been studied and characterized in detail. In this review, we hope to describe the major pitfalls encountered by whole-cell system and introduce possible solutions to them using cell-free enzyme systems. We have discussed the glycolytic and fermentative pathways and their regulation at both transcription and translational levels. Moreover, several strategies employed for development of cell-free enzyme system have been described with their potential merits and shortcomings associated with these developmental approaches. We also described in detail the various developmental approaches of synthetic cell-free enzyme system such as compartmentalization, metabolic channeling, protein fusion, and co-immobilization strategies. Additionally, we portrayed the novel cell-free enzyme technologies based on encapsulation and immobilization techniques and their development and commercialization. Through this review, we have presented the basics of cell-free enzyme system, the strategies involved in development and operation, and the advantages over conventional processes. Finally, we have addressed some potential directions for the future development and industrialization of cell-free enzyme system.

Sustainable production of bacterial flocculants by nylon-6,6 microplastics hydrolysate utilizing Brucella intermedia ZL-06.

Nylon-6,6 microplastics (NMPs) in aquatic systems have emerged as potential contaminants to the global environment and have garnered immense consideration over the years. Unfortunately, there is currently no efficient method available to eliminate NMPs from sewage. This study aims to address this issue by isolating Brucella intermedia ZL-06, a bacterium capable of producing a bacterial polysaccharide-based flocculant (PBF). The PBF generated from this bacterium shows promising efficacy in effectively flocculating NMPs. Subsequently, the precipitated flocs (NMPs + PBF) were utilized as sustainable feedstock for synthesizing PBF. The study yielded 6.91 g/L PBF under optimum conditions. Genome sequencing analysis was conducted to study the mechanisms of PBF synthesis and nylon-6,6 degradation. The PBF exhibited impressive flocculating capacity of 90.1 mg/g of PBF when applied to 0.01 mm NMPs, aided by the presence of Ca2+. FTIR and XPS analysis showed the presence of hydroxyl, carboxyl, and amine groups in PBF. The flocculation performance of PBF conformed to Langmuir isotherm and pseudo-first-order adsorption kinetics model. These findings present a promising approach for reducing the production costs of PBF by utilizing NMPs as sustainable nutrient sources.

FUS3: Orchestrating soybean plant development and boosting stress tolerance through metabolic pathway regulation.

Soybean research has gained immense attention due to its extensive use in food, feedstock, and various industrial applications, such as the production of lubricants and engine oils. In oil crops, the process of seed development and storage substances accumulation is intricate and regulated by multiple transcription factors (TFs). In this study, FUSCA3 (GmFUS3) was characterized for its roles in plant development, lipid metabolism, and stress regulation. Expressing GmFUS3 in atfus3 plants restored normal characteristics observed in wild-type plants, including cotyledon morphology, seed shape, leaf structure, and flower development. Additionally, its expression led to a significant increase of 25% triacylglycerols (TAG) and 33% in protein levels. Transcriptomic analysis further supported the involvement of GmFUS3 in various phases of plant development, lipid biosynthesis, lipid trafficking, and flavonoid biosynthesis. To assess the impact of stress on GmFUS3 expression, soybean plants were subjected to different stress conditions, and the its expression was assessed. Transcriptomic data revealed significant alterations in the expression levels of approximately 80 genes linked to reactive oxygen species (ROS) signaling and 40 genes associated with both abiotic and biotic stresses. Additionally, GmFUS3 was found to regulate abscisic acid synthesis and interact with nucleoside diphosphate kinase 1, which is responsible for plant cellular processes, development, and stress response. Overall, this research sheds light on the multifaceted functions of GmFUS3 and its potential applications in enhancing crop productivity and stress tolerance.

Lignin developmental patterns and Casparian strip as apoplastic barriers: A review.

Lignin and Casparian strips are two essential components of plant cells that play critical roles in plant development regulate nutrients and water across the plants cell. Recent studies have extensively investigated lignin diversity and Casparian strip formation, providing valuable insights into plant physiology. This review presents the established lignin biosynthesis pathway, as well as the developmental patterns of lignin and Casparian strip and transcriptional network associated with Casparian strip formation. It describes the biochemical and genetic mechanisms that regulate lignin biosynthesis and deposition in different plants cell types and tissues. Additionally, the review highlights recent studies that have uncovered novel lignin biosynthesis genes and enzymatic pathways, expanding our understanding of lignin diversity. This review also discusses the developmental patterns of Casparian strip in roots and their role in regulating nutrient and water transport, focusing on recent genetic and molecular studies that have identified regulators of Casparian strip formation. Previous research has shown that lignin biosynthesis genes also play a role in Casparian strip formation, suggesting that these processes are interconnected. In conclusion, this comprehensive overview provides insights into the developmental patterns of lignin diversity and Casparian strip as apoplastic barriers. It also identifies future research directions, including the functional characterization of novel lignin biosynthesis genes and the identification of additional regulators of Casparian strip formation. Overall, this review enhances our understanding of the complex and interconnected processes that drive plant growth, pathogen defense, regulation and development.

In situ biomineralization reinforcing anisotropic nanocellulose scaffolds for guiding the differentiation of bone marrow-derived mesenchymal stem cells.

Nanocellulose (NC) is a promising biopolymer for various biomedical applications owing to its biocompatibility and low toxicity. However, it faces challenges in tissue engineering (TE) applications due to the inconsistency of the microenvironment within the NC-based scaffolds with target tissues, including anisotropy microstructure and biomechanics. To address this challenge, a facile swelling-induced nanofiber alignment and a novel in situ biomineralization reinforcement strategies were developed for the preparation of NC-based scaffolds with tunable anisotropic structure and mechanical strength for guiding the differentiation of bone marrow-derived mesenchymal stem cells for potential TE application. The bacterial cellulose (BC) and cellulose nanofibrils (CNFs) based scaffolds with tunable swelling anisotropic index in the range of 10-100 could be prepared by controlling the swelling medium. The in situ biomineralization efficiently reinforced the scaffolds with 2-4 times and 10-20 times modulus increasement for BC and CNFs, respectively. The scaffolds with higher mechanical strength were superior in supporting cell growth and proliferation, suggesting the potential application in TE application. This work demonstrated the feasibility of the proposed strategy in the preparation of scaffolds with mechanical anisotropy to induce cells-directed differentiation for TE applications.

Ammonia Exposure-Induced Immunological Damage in Chicken Lymphoid Organs via TLR-7/MYD88/NF-κB Signaling Pathway and NLRP3 Inflammasome Activation.

Ammonia (NH3) is a hazardous gas that pollutes the environment and causes irritation. Its harmful effects on chickens, including its impact on their immune system, have previously been observed. However, the mechanism by which NH3 exposure causes immune system disorders in chickens remains unclear. The bursa of Fabricius (BF) and thymus are the two main lymphoid organs responsible for the proliferation, differentiation, and selection of B- and T-lymphocytes, both critical for the innate immune response of the host. In this study, we investigated the mechanism of NH3-induced immune dysregulation in broiler chickens. Transmission electron microscopy (TEM) revealed swollen mitochondria and breakage of the large crista lining, membrane deformation, chromatin condensation, increased vacuolation, and blood vessel spasms in the NH3-exposed BF and thymus tissues. Immunofluorescent analysis showed clustering of CD4+ and CD8+ cells, indicating an active immune response to NH3 exposure. Furthermore, NH3 exposure enhanced the mRNA expressions of Toll-like receptor 7 (TLR-7), myeloid differentiation primary response 88 (MYD88), and nuclear factor-kappa B (NF-κB), along with their proteins, and led to activation of the TLR-7/MyD88/NF-κB signaling pathway and NLRP3 inflammasome in chicken thymus tissues. Both mRNA and protein levels of key inflammation-related genes and proteins were upregulated in the NH3-treated group, highlighting a robust inflammatory response due to NH3 exposure. The specific findings of significant structural damage to key lymphoid organs and activation of inflammatory pathways in broiler chickens upon NH3 exposure can provide guidance for future, targeted therapies to improve poultry health.

Ultrasensitive Electrochemical Detection of Salmonella typhimurium in Food Matrices Using Surface-Modified Bacterial Cellulose with Immobilized Phage Particles.

The rapid and sensitive detection of Salmonella typhimurium in food matrices is crucial for ensuring food safety. This study presents the development of an ultrasensitive electrochemical biosensor using surface-modified bacterial cellulose (BC) integrated with polypyrrole (Ppy) and reduced graphene oxide (RGO), further functionalized with immobilized S. typhimurium-specific phage particles. The BC substrate, with its ultra-fibrous and porous structure, was modified through in situ oxidative polymerization of Ppy and RGO, resulting in a highly conductive and flexible biointerface. The immobilization of phages onto this composite was facilitated by electrostatic interactions between the polycationic Ppy and the negatively charged phage capsid heads, optimizing phage orientation and enhancing bacterial capture efficiency. Morphological and chemical characterization confirmed the successful fabrication and phage immobilization. The biosensor demonstrated a detection limit of 1 CFU/mL for S. typhimurium in phosphate-buffered saline (PBS), with a linear detection range spanning 100 to 107 CFU/mL. In real samples, the sensor achieved detection limits of 5 CFU/mL in milk and 3 CFU/mL in chicken, with a linear detection range spanning 100 to 106 CFU/mL, maintaining high accuracy and reproducibility. The biosensor also effectively discriminated between live and dead bacterial cells, demonstrating its potential in real-world food safety applications. The biosensor performed excellently over a wide pH range (4-10) and remained stable for up to six weeks. Overall, the developed BC/Ppy/RGO-phage biosensor offers a promising tool for the rapid, sensitive, and selective detection of S. typhimurium, with robust performance across different food matrices.

Fabrication and Characterization of Montmorillonite Clay/Agar-Based Magnetic Composite and Its Biological and Electrical Conductivity Evaluation.

Montmorillonite clay and agar are naturally occurring materials of significant importance in designing biocompatible materials tailored for applications in biotechnology and medicine. The introduction of magnetic properties has the potential to significantly boost their characteristics and expand their applications. In this study, we have successfully synthesized highly intercalated magnetic composites, incorporating magnetic iron oxide nanoparticles (MNPs), montmorillonite clay (MMT), and agar (AG), through a thermo-physicomechanical method. Three samples of MMT-AG with 2, 1.5, and 0.5% MNPs and three sample composites of MNPs-AG with 2, 1, and 0.5% MMT clay are prepared. The synthesized composites were characterized by SEM, XRD, TGA, DTA, and FTIR. SEM analysis revealed a uniform dispersion of MNPs and MMT in the composite. The XRD pattern confirmed the presence of MNPs in the composite site. The TGA and DTA results demonstrated improved thermal stability due to the MNP incorporation. FTIR spectra showed all of the constituents of agar, MNPs, and MMT clay. The swelling ratio was observed to range from 835% to 1739%. The swelling study indicated an increased hydrophobicity with the addition of MNPs to the composite. Antibacterial activities revealed a significant inhibition of Escherichia coli (E. coli) growth by ranging from 10 to 19 nm in the composite. The composite also exhibited a considerable antioxidant action, with IC50 values of 7.96, 46.55, and 57.58 µg/mL, and electrical properties just like conductors.

Lignin valorization through the oxidative activity of ß-etherases: Recent advances and perspectives.

The increasing interest in lignin, a complex and abundant biopolymer, stems from its ability to produce environmentally beneficial biobased products. ß-Etherases play a crucial role by breaking down the ß-aryl ether bonds in lignin. This comprehensive review covers the latest advancements in ß-etherase-mediated lignin valorization, focusing on substrate selectivity, enzymatic oxidative activity, and engineering methods. Research on the microbial origin, protein modification, and molecular structure determination of ß-etherases has improved our understanding of their effectiveness. Furthermore, the use of these enzymes in biorefinery processes is promising for enhancing lignin breakdown and creating more valuable products. The review also discusses the challenges and future potential of ß-etherases in advancing lignin valorization for biorefinery applications that are economically viable and environmentally sustainable.

Unveiling the resistance of native weed communities: insights for managing invasive weed species in disturbed environments.

Weed communities influence the dynamics of ecosystems, particularly in disturbed environments where anthropogenic activities often result in higher pollution. Understanding the dynamics existing between native weed communities and invasive species in disturbed environments is crucial for effective management and normal ecosystem functioning. Recognising the potential resistance of native weed communities to invasion in disturbed environments can help identify suitable native plants for restoration operations. This review aims to investigate the adaptations exhibited by native and non-native weeds that may affect invasions within disturbed environments. Factors such as ecological characteristics, altered soil conditions, and adaptations of native weed communities that potentially confer a competitive advantage relative to non-native or invasive weeds in disturbed environments are analysed. Moreover, the roles of biotic interactions such as competition, mutualistic relationships, and allelopathy in shaping the invasion resistance of native weed communities are described. Emphasis is given to the consideration of the resistance of native weeds as a key factor in invasion dynamics that provides insights for conservation and restoration efforts in disturbed environments. Additionally, this review underscores the need for further research to unravel the underlying mechanisms and to devise targeted management strategies. These strategies aim to promote the resistance of native weed communities and mitigate the negative effects of invasive weed species in disturbed environments. By delving deeper into these insights, we can gain an understanding of the ecological dynamics within disturbed ecosystems and develop valuable insights for the management of invasive species, and to restore long-term ecosystem sustainability.

Harnessing the power of bacterial laccases for xenobiotic degradation in water: A 10-year overview.

Industrialization and population growth are leading to the production of significant amounts of sewage containing hazardous xenobiotic compounds. These compounds pose a threat to human and animal health, as well as the overall ecosystem. To combat this issue, chemical, physical, and biological techniques have been used to remove these contaminants from water bodies affected by human activity. Biotechnological methods have proven effective in utilizing microorganisms and enzymes, particularly laccases, to address this problem. Laccases possess versatile enzymatic characteristics and have shown promise in degrading different xenobiotic compounds found in municipal, industrial, and medical wastewater. Both free enzymes and crude enzyme extracts have demonstrated success in the biotransformation of these compounds. Despite these advancements, the widespread use of laccases for bioremediation and wastewater treatment faces challenges due to the complex composition, high salt concentration, and extreme pH often present in contaminated media. These factors negatively impact protein stability, recovery, and recycling processes, hindering their large-scale application. These issues can be addressed by focusing on large-scale production, resolving operation problems, and utilizing cutting-edge genetic and protein engineering techniques. Additionally, finding novel sources of laccases, understanding their biochemical properties, enhancing their catalytic activity and thermostability, and improving their production processes are crucial steps towards overcoming these limitations. By doing so, enzyme-based biological degradation processes can be improved, resulting in more efficient removal of xenobiotics from water systems. This review summarizes the latest research on bacterial laccases over the past decade. It covers the advancements in identifying their structures, characterizing their biochemical properties, exploring their modes of action, and discovering their potential applications in the biotransformation and bioremediation of xenobiotic pollutants commonly present in water sources.

Recent Progress in Advanced Hydrogel-Based Embolic Agents: From Rational Design Strategies to Improved Endovascular Embolization.

Transcatheter arterial embolization, a minimally invasive treatment to deliberately occlude the blood vessels, has become a safe and effective procedure for the management of vascular diseases and benign/malignant tumors. Particularly, hydrogel-based embolic agents have garnered much attention because of their potential to address some of the limitations of clinically used embolic agents and can be rationally designed to impart more favorable characteristics or functions. In this review, the recent progress toward the development of polymer-based hydrogels for effective endovascular embolization, including the in situ gelling hydrogels mediated by physically or chemically crosslinking, imageable hydrogels for intraprocedural and postprocedural feedback, use of hydrogels as the drug depot for local delivery of therapeutic drugs, hemostatic hydrogels inducing extrinsic or intrinsic coagulation of blood, stimuli-responsive shape memory hydrogels as the smart embolization devices, and hydrogels incorporating external-stimuli functional materials for multidisciplinary therapy, is systemically summarized. Moreover, the potential considerations of hydrogel-based embolic agents confronted in therapeutic embolization are pointed out. Finally, the perspectives for the development of more effective embolic hydrogels are also highlighted.

The versatility of nanocellulose, modification strategies, and its current progress in wastewater treatment and environmental remediation.

Deterioration in the environmental ecosystems through the depletion of nonrenewable resources and the burden of deleterious contaminants is considered a global concern. To this end, great interest has been shown in the use of renewable and environmentally-friendly reactive materials dually to promote environmental sustainability and cope with harmful contaminants. Among the different available options, the use of nanocellulose (NC) as an environmentally benign and renewable natural nanomaterial is an attractive candidate for environmental remediation owing to its miraculous physicochemical characteristics. This review discusses the intrinsic properties and the structural aspects of different types of NC, including cellulose nanofibrils (CNFs), cellulose nanocrystals (CNCs), and bacterial cellulose (BC) or bacterial nanocellulose (BNC). Also, the different modification strategies involving the functionalization or hybridization of NC by using different functional and reactive materials aimed at wastewater remediation have been elaborated. The modified or hybridized NC has been explored for its applications in the removal or degradation of aquatic contaminants through adsorption, filtration, coagulation, catalysis, photocatalysis, and pollutant sensing. This review highlights the role of NC in the modified composites and describes the underlying mechanisms involved in the removal of contaminants. The life-cycle assessment (LCA) of NC is discussed to unveil the hidden risks associated with its production to the final disposal. Moreover, the contribution of NC in the promotion of waste management at different stages has been described in the form of the five-Rs strategy. In summary, this review provides rational insights to develop NC-based environmentally-friendly reactive materials for the removal and degradation of hazardous aquatic contaminants.