RESUMEN
Nature achieves differentiation of specific and nonspecific binding in molecular interactions through precise control of biomolecules in space and time. Artificial systems such as biosensors that rely on distinguishing specific molecular binding events in a sea of nonspecific interactions have struggled to overcome this issue. Despite the numerous technological advancements in biosensor technologies, nonspecific binding has remained a critical bottleneck due to the lack of a fundamental understanding of the phenomenon. To date, the identity, cause, and influence of nonspecific binding remain topics of debate within the scientific community. In this review, we discuss the evolution of the concept of nonspecific binding over the past five decades based upon the thermodynamic, intermolecular, and structural perspectives to provide classification frameworks for biomolecular interactions. Further, we introduce various theoretical models that predict the expected behavior of biosensors in physiologically relevant environments to calculate the theoretical detection limit and to optimize sensor performance. We conclude by discussing existing practical approaches to tackle the nonspecific binding challenge in vitro for biosensing platforms and how we can both address and harness nonspecific interactions for in vivo systems.
Asunto(s)
Técnicas Biosensibles , Animales , HumanosRESUMEN
The serotonergic system in the human brain modulates several physiological processes, and altered serotonergic neurotransmission has been implicated in the neuropathology of several psychiatric disorders. The study of serotonergic neurotransmission in psychiatry has long been restricted to animal models, but advances in cell reprogramming technology have enabled the generation of serotonergic neurons from patient-induced pluripotent stem cells (iPSCs). While iPSC-derived human serotonergic neurons offer the possibility to study serotonin (5-HT) release and uptake, particularly by 5-HT-modulating drugs such as selective serotonin reuptake inhibitors (SSRIs), a major limitation is the inability to reliably quantify 5-HT secreted from neurons in vitro. Herein, we address this technical gap via a novel sensing technology that couples 5-HT-specific DNA aptamers into nanopores (glass nanopipettes) with orifices of ~10 nm to detect 5-HT in complex neuronal culture medium with higher selectivity, sensitivity, and stability than existing methods. The 5-HT aptamers undergo conformational rearrangement upon target capture and serve as gatekeepers of ionic flux through the nanopipette opening. We generated human serotonergic neurons in vitro and detected secreted 5-HT using aptamer-coated nanopipettes in a low nanomolar range, with the possibility of detecting significantly lower (picomolar) concentrations. Furthermore, as a proof of concept, we treated human serotonergic neurons in vitro with the SSRI citalopram and detected a significant increase in extracellular 5-HT using the aptamer-modified nanopipettes. We demonstrate the utility of such methods for 5-HT detection, raising the possibility of fast quantification of neurotransmitters secreted from patient-derived live neuronal cells.
Asunto(s)
Neuronas Serotoninérgicas , Serotonina , Animales , Encéfalo , Citalopram/farmacología , Humanos , Inhibidores Selectivos de la Recaptación de Serotonina/farmacologíaRESUMEN
We report artificial nanopores in the form of quartz nanopipettes with ca. 10 nm orifices functionalized with molecular recognition elements termed aptamers that reversibly recognize serotonin with high specificity and selectivity. Nanoscale confinement of ion fluxes, analyte-specific aptamer conformational changes, and related surface charge variations enable serotonin sensing. We demonstrate detection of physiologically relevant serotonin amounts in complex environments such as neurobasal media, in which neurons are cultured in vitro. In addition to sensing in physiologically relevant matrices with high sensitivity (picomolar detection limits), we interrogate the detection mechanism via complementary techniques such as quartz crystal microbalance with dissipation monitoring and electrochemical impedance spectroscopy. Moreover, we provide a novel theoretical model for structure-switching aptamer-modified nanopipette systems that supports experimental findings. Validation of specific and selective small-molecule detection, in parallel with mechanistic investigations, demonstrates the potential of conformationally changing aptamer-modified nanopipettes as rapid, label-free, and translatable nanotools for diverse biological systems.
Asunto(s)
Aptámeros de Nucleótidos , Técnicas Biosensibles , Nanoporos , Tecnicas de Microbalanza del Cristal de Cuarzo , SerotoninaRESUMEN
Label-free optical biosensors, such as surface plasmon resonance, are sensitive and well-established for the characterization of molecular interactions. Yet, these sensors require stabilization and constant conditions even with the use of reference channels. In this paper, we use tools from signal processing to show why these sensors are so cross-sensitive and how to overcome their drawbacks. In particular, we conceptualize the spatial affinity lock-in as a universal design principle for sensitive molecular sensors even in the complete absence of stabilization. The spatial affinity lock-in is analogous to the well-established time-domain lock-in. Instead of a time-domain signal, it modulates the binding signal at a high spatial frequency to separate it from the low spatial frequency environmental noise in Fourier space. In addition, direct sampling of the locked-in sensor's response in Fourier space enabled by diffraction has advantages over sampling in real space as done by surface plasmon resonance sensors using the distributed reference principle. This paper and part II hint at the potential of spatially locked-in diffractometric biosensors to surpass state-of-the-art temperature-stabilized refractometric biosensors. Even simple, miniaturized and non-stabilized sensors might achieve the performance of bulky lab instruments. This may enable new applications in label-free analysis of molecular binding and point-of-care diagnostics.
RESUMEN
Molecular processes within cells have traditionally been studied with biochemical methods due to their high degree of specificity and ease of use. In recent years, cell-based assays have gained more and more popularity since they facilitate the extraction of mode of action, phenotypic, and toxicity information. However, to provide specificity, cellular assays rely heavily on biomolecular labels and tags while label-free cell-based assays only offer holistic information about a bulk property of the investigated cells. Here, we introduce a cell-based assay for protein-protein interaction analysis. We achieve specificity by spatially ordering a membrane protein of interest into a coherent pattern of fully functional membrane proteins on the surface of an optical sensor. Thereby, molecular interactions with the coherently ordered membrane proteins become visible in real time, while nonspecific interactions and holistic changes within the living cell remain invisible. Due to its unbiased nature, this new cell-based detection method presents itself as an invaluable tool for cell signaling research and drug discovery.
Asunto(s)
Transferencia Resonante de Energía de Fluorescencia/métodos , Proteínas de la Membrana/metabolismo , Arrestina/química , Arrestina/genética , Arrestina/metabolismo , Proteínas Fluorescentes Verdes/genética , Proteínas Fluorescentes Verdes/metabolismo , Células HEK293 , Humanos , Proteínas de la Membrana/química , Proteínas de la Membrana/genética , Mapas de Interacción de Proteínas , Receptores Adrenérgicos beta 2/química , Receptores Adrenérgicos beta 2/genética , Receptores Adrenérgicos beta 2/metabolismoRESUMEN
Some minor issues were discovered after publication of Opt Lett. 43, 5801 (2018) and are corrected here. They do not change the main message of the paper.
RESUMEN
Label-free optical biosensors are an invaluable tool for molecular interaction analysis. Over the past 30 years, refractometric biosensors and, in particular, surface plasmon resonance have matured to the de facto standard of this field despite a significant cross reactivity to environmental and experimental noise sources. In this paper, we demonstrate that sensors that apply the spatial affinity lock-in principle (part I) and perform readout by diffraction overcome the drawbacks of established refractometric biosensors. We show this with a direct comparison of the cover refractive index jump sensitivity as well as the surface mass resolution of an unstabilized diffractometric biosensor with a state-of-the-art Biacore 8k. A combined refractometric diffractometric biosensor demonstrates that a refractometric sensor requires a much higher measurement precision than the diffractometric to achieve the same resolution. In a conceptual and quantitative discussion, we elucidate the physical reasons behind and define the figure of merit of diffractometric biosensors. Because low-precision unstabilized diffractometric devices achieve the same resolution as bulky stabilized refractometric sensors, we believe that label-free optical sensors might soon move beyond the drug discovery lab as miniaturized, mass-produced environmental/medical sensors. In fact, combined with the right surface chemistry and recognition element, they might even bring the senses of smell/taste to our smart devices.
RESUMEN
Herein, we present an easy-to-use protein and cell patterning method relying solely on pipetting, rinsing steps and illumination with a desktop lamp, which does not require any expensive laboratory equipment, custom-built hardware or delicate chemistry. This method is based on the adhesion promoter poly(allylamine)-grafted perfluorophenyl azide, which allows UV-induced cross-linking with proteins and the antifouling molecule poly(vinylpyrrolidone). Versatility is demonstrated by creating patterns with two different proteins and a polysaccharide directly on plastic well plates and on glass slides, and by subsequently seeding primary neurons and C2C12 myoblasts on the patterns to form islands and mini-networks. Patterning characterization is done via immunohistochemistry, Congo red staining, ellipsometry, and infrared spectroscopy. Using a pragmatic setup, patterning contrasts down to 5 µm and statistically significant long-term stability superior to the gold standard poly(l-lysine)-grafted poly(ethylene glycol) could be obtained. This simple method can be used in any laboratory or even in classrooms and its outstanding stability is especially interesting for long-term cell experiments, e.g., for bottom-up neuroscience, where well-defined microislands and microcircuits of primary neurons are studied over weeks.
Asunto(s)
Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Técnicas de Cultivo de Célula/métodos , Neuronas/citología , Neuronas/efectos de los fármacos , Proteínas/metabolismo , Animales , Línea Celular , Supervivencia Celular/efectos de los fármacos , Mioblastos/citología , Proyección Neuronal/efectos de los fármacos , Neuronas/metabolismo , Polímeros/química , Ratas , Propiedades de SuperficieRESUMEN
Plasmonically coupled graphene structures have shown great promise for sensing applications. Their complex and cumbersome fabrication, however, has prohibited their widespread application and limited their use to rigid, planar surfaces. Here, a plasmonic sensor based on gold nanowire arrays on an elastomer with an added graphene monolayer is introduced. The stretchable plasmonic nanostructures not only significantly enhance the Raman signal from graphene, but can also be used by themselves as a sensor platform for 2D strain sensing. These nanowire arrays on an elastomer are fabricated by template-stripping based nanotransfer printing, which enables a simple and fast production of stable nanogratings. The ultrasmooth surfaces of such transferred structures facilitate reliable large-area transfers of graphene monolayers. The resulting coupled graphene-nanograting construct exhibits ultrahigh sensitivity to applied strain, which can be detected by shifts in the plasmonic-enhanced Raman spectrum. Furthermore, this sensor enables the detection of adsorbed molecules on nonplanar surfaces through graphene-assisted surface enhanced Raman spectroscopy (SERS). The simple fabrication of the plasmonic nanowire array platform and the graphene-coupled devices have the potential to trigger widespread SERS applications and open up new opportunities for high-sensitivity strain sensing applications.
RESUMEN
Focal molography is a label-free optical biosensing method that relies on a coherent pattern of binding sites for biomolecular interaction analysis. Reactive immersion lithography (RIL) is central to the patterning of molographic chips but has potential for improvements. Here, we show that applying the idea of image reversal to RIL enables the fabrication of coherent binding patterns of increased quality (i.e., higher analyte efficiency). Thereby the detection limit of focal molography in biological assays can be improved.
RESUMEN
Physiological communication between neurons is dependent on the exchange of neurotransmitters at the synapses. Although this chemical signal transmission targets specific receptors and allows for subtle adaptation of the action potential, in vitro neuroscience typically relies on electrical currents and potentials to stimulate neurons. The electric stimulus is unspecific and the confinement of the stimuli within the media is technically difficult to control and introduces large artifacts in electric recordings of the activity. Here, we present a local chemical stimulation platform that resembles in vivo physiological conditions and can be used to target specific receptors of synapses. Neurotransmitters were dispensed using the force-controlled fluidic force microscope (FluidFM) nanopipette, which provides exact positioning and precise liquid delivery. We show that controlled release of the excitatory neurotransmitter glutamate induces spiking activity in primary rat hippocampal neurons, as measured by concurrent electrical and optical recordings using a microelectrode array and a calcium-sensitive dye, respectively. Furthermore, we characterized the glutamate dose response of neurons by applying stimulation pulses of glutamate with concentrations from 0 to 0.5â mm. This new stimulation approach, which combines FluidFM for gentle and precise positioning with a microelectrode array read-out, makes it possible to modulate the activity of individual neurons chemically and simultaneously record their induced activity across the entire neuronal network. The presented platform not only offers a more physiological alternative compared with electrical stimulation, but also provides the possibility to study the effects of the local application of neuromodulators and other drugs.
Asunto(s)
Neuronas/química , Animales , Células Cultivadas , Electrodos , Femenino , Microscopía de Fuerza Atómica/instrumentación , Neuronas/metabolismo , Ratas , Ratas Wistar , Estimulación QuímicaRESUMEN
Arranging cultured cells in patterns via surface modification is a tool used by biologists to answer questions in a specific and controlled manner. In the past decade, bottom-up neuroscience emerged as a new application, which aims to get a better understanding of the brain via reverse engineering and analyzing elementary circuitry in vitro. Building well-defined neural networks is the ultimate goal. Antifouling coatings are often used to control neurite outgrowth. Because erroneous connectivity alters the entire topology and functionality of minicircuits, the requirements are demanding. Current state-of-the-art coating solutions such as widely used poly(l-lysine)-g-poly(ethylene glycol) (PLL-g-PEG) fail to prevent primary neurons from making undesired connections in long-term cultures. In this study, a new copolymer with greatly enhanced antifouling properties is developed, characterized, and evaluated for its reliability, stability, and versatility. To this end, the following components are grafted to a poly(acrylamide) (PAcrAm) backbone: hexaneamine, to support spontaneous electrostatic adsorption in buffered aqueous solutions, and propyldimethylethoxysilane, to increase the durability via covalent bonding to hydroxylated culture surfaces and antifouling polymer poly(2-methyl-2-oxazoline) (PMOXA). In an assay for neural connectivity control, the new copolymer's ability to effectively prevent unwanted neurite outgrowth is compared to the gold standard, PLL-g-PEG. Additionally, its versatility is evaluated on polystyrene, glass, and poly(dimethylsiloxane) using primary hippocampal and cortical rat neurons as well as C2C12 myoblasts, and human fibroblasts. PAcrAm-g-(PMOXA, NH2, Si) consistently outperforms PLL-g-PEG with all tested culture surfaces and cell types, and it is the first surface coating which reliably prevents arranged nodes of primary neurons from forming undesired connections over the long term. Whereas the presented work focuses on the proof of concept for the new antifouling coating to successfully and sustainably prevent unwanted connectivity, it is an important milestone for in vitro neuroscience, enabling follow-up studies to engineer neurologically relevant networks. Furthermore, because PAcrAm-g-(PMOXA, NH2, Si) can be quickly applied and used with various surfaces and cell types, it is an attractive extension to the toolbox for in vitro biology and biomedical engineering.
Asunto(s)
Oxazoles/química , Adsorción , Animales , Células Cultivadas , Humanos , Polietilenglicoles , Polilisina , Polímeros , Ratas , Reproducibilidad de los Resultados , Propiedades de SuperficieRESUMEN
Intrinsically stretchable multilayer circuit boards are fabricated with a fast and material efficient method based on filtration. Silver nanowire conductor patterns of outstanding performance are defined by filtration through wax printed membranes and the circuit board is assembled by subsequent transfers of the nanowires onto the elastomer substrate. The method is used to fabricate a bright stretchable light emitting diode matrix display.
RESUMEN
Atomic force microscopy (AFM) cantilevers have proven to be very effective mass sensors. The attachment of a small mass to a vibrating cantilever produces a resonance frequency shift that can be monitored, providing the ability to measure mass changes down to a few molecules resolution. Nevertheless, the lack of a practical method to handle the catch and release process required for dynamic weighting of microobjects strongly hindered the application of the technology beyond proof of concept measurements. Here, a method is proposed in which FluidFM hollow cantilevers are exploited to overcome the standard limitations of AFM-based mass sensors, providing high throughput single object weighting with picogram accuracy. The extension of the dynamic models of AFM cantilevers to hollow cantilevers was discussed and the effectiveness of mass weighting in air was validated on test samples.
RESUMEN
From its invention in the 1970s, the patch clamp technique is the gold standard in electrophysiology research and drug screening because it is the only tool enabling accurate investigation of voltage-gated ion channels, which are responsible for action potentials. Because of its key role in drug screening, innovation efforts are being made to reduce its complexity toward more automated systems. While some of these new approaches are being adopted in pharmaceutical companies, conventional patch-clamp remains unmatched in fundamental research due to its versatility. Here, we merged the patch clamp and atomic force microscope (AFM) techniques, thus equipping the patch-clamp with the sensitive AFM force control. This was possible using the FluidFM, a force-controlled nanopipette based on microchanneled AFM cantilevers. First, the compatibility of the system with patch-clamp electronics and its ability to record the activity of voltage-gated ion channels in whole-cell configuration was demonstrated with sodium (NaV1.5) channels. Second, we showed the feasibility of simultaneous recording of membrane current and force development during contraction of isolated cardiomyocytes. Force feedback allowed for a gentle and stable contact between AFM tip and cell membrane enabling serial patch clamping and injection without apparent cell damage.
Asunto(s)
Potenciales de Acción/fisiología , Potenciales de la Membrana/fisiología , Sistemas Microelectromecánicos/instrumentación , Miocitos Cardíacos/fisiología , Canal de Sodio Activado por Voltaje NAV1.5/fisiología , Técnicas de Placa-Clamp/instrumentación , Diseño de Equipo , Análisis de Falla de Equipo , Retroalimentación , Células HEK293 , Humanos , Activación del Canal Iónico/fisiología , Micromanipulación/instrumentación , Microscopía de Fuerza Atómica/instrumentación , Contracción Miocárdica/fisiología , Estrés MecánicoRESUMEN
We combined scanning ion conductance microscopy (SICM) and atomic force microscopy (AFM) into a single tool using AFM cantilevers with an embedded microchannel flowing into the nanosized aperture at the apex of the hollow pyramid. An electrode was positioned in the AFM fluidic circuit connected to a second electrode in the bath. We could thus simultaneously measure the ionic current and the cantilever bending (in optical beam deflection mode). First, we quantitatively compared the SICM and AFM contact points on the approach curves. Second, we estimated where the probe in SICM mode touches the sample during scanning on a calibration grid and applied the finding to image a network of neurites on a Petri dish. Finally, we assessed the feasibility of a double controller using both the ionic current and the deflection as input signals of the piezofeedback. The experimental data were rationalized in the framework of finite elements simulations.
Asunto(s)
Microscopía de Fuerza Atómica/instrumentación , Microscopía de Fuerza Atómica/métodos , Microscopía de Sonda de Barrido/instrumentación , Microscopía de Sonda de Barrido/métodos , Animales , Hipocampo/ultraestructura , Modelos Teóricos , Neuronas/ultraestructura , RatasRESUMEN
Iodide is an essential element for humans and animals and insufficient intake is still a major problem. Affordable and accurate methods are required to quantify iodide concentrations in biological and environmental fluids. A simple and low cost sensing device is presented which is based on iodide induced electrochemical etching of ultrathin gold films. The sensitivity of resistance measurements to film thickness changes is increased by using films with a thickness smaller than the electron mean free path. The underlying mechanism is demonstrated by simultaneous cyclic voltammetry experiments and resistance change measurements in a buffer solution. Iodide sensing is conducted in buffer solutions as well as in lake water with limits of detection in the range of 1 µM (127 µg L(-1)) and 2 µM (254 µg L(-1)), respectively. In addition, nanoholes embedded in the thin films are tested for suitability of optical iodide sensing based on localized surface plasmon resonance.
Asunto(s)
Técnicas Electroquímicas/métodos , Oro/química , Yoduros/análisis , Yoduros/química , Tampones (Química) , Coloides , Impedancia Eléctrica , Iones , Lagos/química , Microscopía Electrónica de Rastreo , Poliestirenos/química , SolucionesRESUMEN
Metallic interconnections were fabricated in situ using the FluidFM as scanning probe lithography tool. In contrast to other SPL tools, the closed fluidic circuit of the FluidFM enables a pressure-controlled deposition of metallic nanoparticles in liquid environment. Taking advantage of the salt concentration of the liquid environment (i.e. the ionic strength) to tailor the resulting particle density in the deposited layer, a protocol was established for direct patterning of conductive interconnecting structures. The FluidFM microchannel was filled with an aqueous solution of negatively charged gold nanoparticles (AuNPs) to be delivered onto a glass surface coated with a polycation favoring electrostatic adhesion. The deposited structures were analyzed both topographically and electrically to optimize the external parameters such as contact time, salt concentration of the liquid environment and size of the AuNPs. Using this optimized protocol we succeeded in the local fabrication of conductive metallic wires between two prefabricated macroelectrodes in liquid environment. In a subsequent step, the conductivity of the deposited structure was improved by gold annealing.
RESUMEN
We developed the simple and inexpensive FoRe microarray to simultaneously test several 1 µL samples for multiple proteins. By combining forward and reverse phase microarrays into an innovative three-dimensional format, the FoRe array exploits the advantages and eliminates several drawbacks of the traditional approaches (i.e., large sample volumes, protein loss, and cross-reactivity between detection antibodies). Samples are pipetted into an array of separable, multiplexed affinity columns. Several nitrocellulose membranes, each functionalized with a different capture antibody, are stacked to create a customizable affinity column. The nitrocellulose is patterned with wax to form 25 isolated microspots on each layer, allowing us to analyze multiple samples in parallel. After running the immunoassay, the stacks are quickly disassembled, revealing 2D microarrays of different fractions from multiple samples. By combining the stack-and-separate technique with wax patterning, we keep the arrays low cost and easily tailored to a variety of applications. We successfully performed 3D multiplexing using a model system with mouse and rabbit IgG. Binding proved to be independent of the position in the stack, and the limit of detection for a mouse IgG sandwich assay was 7.3 pM in BSA and 15 pM in human plasma. The FoRe microarray makes it possible to identify protein expression patterns across several minute volume samples; for example, it could be used to analyze cell lysate in drug response studies or pricks of blood from small animal studies.
Asunto(s)
Cromatografía de Afinidad/instrumentación , Colodión/química , Análisis por Matrices de Proteínas , Reacciones Cruzadas , Dimetilpolisiloxanos/químicaRESUMEN
We discuss physicochemical determinants of electrochemical polyelectrolyte multilayer swelling that are relevant to actuator usage. We used electrochemical quartz crystal microbalance with dissipation monitoring (EC-QCM-D) and cyclic voltammetry to compare the electrochemical swelling of two types of ferrocyanide-containing polyelectrolyte multilayers, poly(l-glutamic acid)/poly(allylamine hydrochloride) (PGA/PAH), and carboxymethyl cellulose/poly(diallyldimethylammonium chloride) (CMC/PDDA). We showed that ferrocyanide oxidation causes the swelling of PGA/PAH multilayers whereas it results in the contraction of CMC/PDDA multilayers. This behavior can be attributed to the presence of a positive and a negative Donnan potential in the case of PGA/PAH and CMC/PDDA multilayers, respectively. Using multilayers consisting of PGA and poly(allylamine) ferrocene (PGA/PAH-FC), we applied EC-QCM-D and demonstrated potentiostatic thickness control with nanometer precision and showed that the multilayer's thickness depends linearly on the applied potential within a certain potential range.