Full-scale multisampling and empirical modeling of DBPs in water and air of indoor pools.

Disinfection by-products (DBPs) are formed in the water in swimming pools due to reactions between disinfectants (chlorine, bromine, ozone) and the organic matter introduced by bathers and supply water. High concentrations of DBPs are also reported in the air of indoor swimming pools. Based on a robust multisampling program, the levels and variations of DBPs in the air (trichloramine [TCAM] and trihalomethanes [THMs]) and water (THM) were assessed, as well as their precursors (total organic carbon, water temperature, pH, free, and total chlorine) and proxies (CO2 and relative humidity) in four indoor chlorinated swimming pools. High-frequency sampling was conducted during one high-attendance day for each pool. This study focused on parameters that are easy to measure in order to develop models for predicting levels of THMs and TCAM in the air. The results showed that the number of bathers had an important impact on the levels of THMs and TCAM, with a two-to-three-fold increase in air chloroform (up to 110 µg/m3) and a two-to-four-fold increase in TCAM (up to 0.52 mg/m3) shortly after pools opened. The results of this study for the first time showed that CO2 and relative humidity can serve as proxies for monitoring variations in airborne THMs and TCAM. Our results highlight the good predictive capacity of the developed models and their potential for use in day-to-day monitoring. This could help optimize and control DBPs formation in the air of indoor swimming pools and reduce contaminant exposure for both pool employees and users.

Microbial contamination and metabolite exposure assessment during waste and recyclable material collection.

Waste workers are exposed to bioaerosols when handling, lifting and dumping garbage. Bioaerosol exposure has been linked to health problems such as asthma, airway irritant symptoms, infectious, gastrointestinal and skin diseases, and cancer. Our objective was to characterize the exposure of urban collectors and drivers to inhalable bioaerosols and to measured the cytotoxic effect of air samples in order to evaluate their health risk. Personal and ambient air sampling were conducted during the summer of 2019. Workers from 12 waste trucks collecting recyclables, organic waste or compost were evaluated. Bacteria and fungi were cultured, molecular biology methods were used to detect microbial indicators, cytotoxic assays were performed and endotoxins and mycotoxins were quantified. Domestic waste collectors were exposed to concentrations of bacteria and endotoxins above the recommended limits, and Aspergillus section Fumigati was detected at critical concentrations in their breathing zones. Cytotoxic effects were observed in many samples, demonstrating the potential health risk for these workers. This study establishes evidence that waste workers are exposed to microbial health risks during collection. It also demonstrates the relevance of cytotoxic assays in documenting the general toxic risk found in air samples. Our results also suggest that exposures differ depending on the type of waste, job title and discharge/unloading locations.

Temporal and spatial variations in the levels of prominent airborne disinfection by-products at four indoor swimming pools.

Exposure to airborne disinfection by-products, especially trichloramine and trichloromethane, may cause various adverse health effects for the workers and users of indoor swimming pools. This study aims to evaluate the spatial and temporal variations in trichloramine and trichloromethane concentrations within and between swimming pools. Workplace measurements were carried out at four indoor swimming pools in Quebec (Canada) during the cold season. To fully represent daily operating conditions, sampling started 2 hr before the swimming pool opened and continued until 2 hr after closing. To quantify trichloramine and trichloromethane concentrations, 304 air samples have been collected. Temperature, humidity, and CO2 were measured-simultaneously every 2 hr. The results showed that both trichloramine and trichloromethane concentrations varied significantly in time. The observed daily variations in trichloramine and trichloromethane concentrations suggest that the common practice of collecting a single 2-hr air sample does not represent daily pool trichloramine and trichloromethane contamination levels and, consequently, does not represent the true exposure and health risks for workers that are present for a full 8-hr shift. This study recommends a new 8-hr sampling strategy or a full-shift strategy using a cassette with three impregnated filters as a valid and cost-effective solution for comparing time-weighted average (TWA) concentrations to permissible trichloramine exposure limits.

Assessment of waste workers occupational risk to microbial agents and cytotoxic effects of mixed contaminants present in the air of waste truck cabin and ventilation filters.

Workers in the waste-processing industry are potentially exposed to high concentrations of biological contaminants, leading to respiratory and digestive problems and skin irritations. However, few data on the exposure of waste collection truck (WCT) drivers are available. The goal was to document the microbial risk of the waste collection truck (WCT) workers while in the vehicle cab. Long-period sampling using the truck air filters (CAF) and short time ambient air sampling in the cab were used. The potential release of microbial particles from CAFs was also investigated since it could contribute to the microbial load of the cabin air. A combination of analytical methods also helped assess the complex mixture of the biological agents. Aspergillus sections Fumigati and Flavi, E. coli, Enterobacter spp. and Legionella spp. were detected in the CAF of trucks collecting three types of waste. The highest levels of bacteria and fungi were found in the CAF from organic WCT. The highest endotoxin concentrations in CAF were 300 EU/cm2. Most of the CAF showed cytotoxic effects on both lung cells and hepatocytes. Only one mycotoxin was detected in a CAF. The maximal concentrations in the ambient WCT air varied according to the type of waste collected. The highest proportion (84%) of the air samples without cytotoxic effects on the lungs cells was for the recyclable material WCTs. The results revealed the potential microbial risk to workers from a complex mixture of bio-contaminants in the cabs of vehicles collecting all types of waste. The sustained cytotoxic effect indicates the potential adverse health-related impact of mixed contaminants (biological and non-biological) for the workers. Overall, this study highlights the benefits of using complementary sampling strategy and combined analytical methods for a the assessment of the microbial risk in work environments and the need to implement protective measures for the workers.Implications: Exposure to microbial agents is a well-known occupational hazard in the waste management sector. No previous study had evaluated the cytotoxicity of ambient air and ventilation filters to document worker exposure to a combination of contaminants during waste collection. This research confirms the usefulness of ventilation filters for long-term characterization of exposure to infectious agents, azole-resistant fungi, coliform bacteria and mycotoxin. Overall, this study highlights the importance of using several sampling and analysis methods for a comprehensive assessment of microbial risk in work environments, as well as the need to implement appropriate protective measures for collection workers.

Complementary sampling strategy and combined analytical methods are helpful in risk assessment.Air filter analysis (long-term sampling) assesses the presence of airborne biological contaminants over a long period.The type of waste collected influences the microbiological hazard of the workers.Waste collection workers are potentially exposed to infectious and mycotoxin-producing fungi.Cytotoxic assays revealed that waste collection workers are potentially.

Comparison of sampling collection strategies for assessing airborne trichloramine levels in indoor swimming pools.

Since 1995, Hery's trichloramine sampling procedure has been widely used to determine trichloramine exposure in indoor swimming pools. This method consists of pumping air at a 1 L/min flow rate for 2 h through a Teflon prefilter and two quartz fiber filters. Modified Hery methods have been reported using different sampling pump flow rates and types of prefilters. It is possible that the prefilter type or sample collection pump flow rate influenced the results of these studies. This study is designed to evaluate the effects of different cassette assemblies and sampling flow rates on the levels of measured trichloramine. Laboratory tests were performed using a trichloramine production setup designed for this study. Workplace measurements were carried out at four indoor swimming pools. Different prefiltering strategies were used: no prefilter, glass prefilter or Teflon prefilter in the sampling cassette, and an original separable prefilter cassette is presented in this study. Laboratory tests indicated that at trichloramine concentrations higher than 1 mg/m3, the percentage of trichloramine captured on the first filter could be less than 75%, which demonstrated possible loss of the material during sampling. An investigation of the prefilter effect on the sampling strategy using different cassette assemblies revealed that using a separable cassette assembly prevented overestimations of trichloramine levels. Furthermore, there were no significant differences between trichloramine concentrations measured at flow rates (from 0.5 to 2 L/min) in swimming pools.