RESUMEN
OBJECTIVES: Automated storage and retrieval modules (SRM), as part of total lab automation (TLA) systems, offer tremendous practical and economic benefits. In contrast to manual storage systems, SRMs indicate continuous motion of samples and may leave samples prone to temperature fluctuations. This study investigates analyte stability in serum and heparin plasma within an automated storage module. METHODS: The stability of 28 common biochemistry analytes was investigated using 57 freshly obtained routine serum samples and 42 lithium-heparin plasma samples. Following baseline measurement, samples were stored at 2-8 °C in the automated SRM of the Accelerator a3600 TLA and reanalyzed at fixed time points (2, 4, 8, 12, 24, 48 and 72 h) on the Abbott Architect c16000 chemistry analyzer. The concentration at each time point was expressed as %-difference to the baseline value and mean results were compared to the criteria for desirable bias derived from the biological variation database. RESULTS: Nine of the analytes exceeded the bias criterion within 72 h after initial measurement in either serum samples, plasma samples or both. Lithium-heparin plasma samples showed increasing values for phosphor, potassium and lactate dehydrogenase (LDH), which were only considered stable for respectively 24, 12 and 4 h, glucose was considered stable for 8 h. Electrolyte concentrations and LDH activity significantly increased in serum samples beyond 48 h. Bicarbonate should not be performed as add-on test at all. CONCLUSIONS: The presented data indicate that the conditions within an SRM have no clinical impact on sample stability and allow stable measurement of routine analytes within 72 h, comparable to manual storage facilities.