Evidence for FHL1 as a novel disease gene for isolated hypertrophic cardiomyopathy.

Hypertrophic cardiomyopathy (HCM) is characterized by asymmetric left ventricular hypertrophy, diastolic dysfunction and myocardial disarray. HCM is caused by mutations in sarcomeric genes, but in >40% of patients, the mutation is not yet identified. We hypothesized that FHL1, encoding four-and-a-half-LIM domains 1, could be another disease gene since it has been shown to cause distinct myopathies, sometimes associated with cardiomyopathy. We evaluated 121 HCM patients, devoid of a mutation in known disease genes. We identified three novel variants in FHL1 (c.134delA/K45Sfs, c.459C>A/C153X and c.827G>C/C276S). Whereas the c.459C>A variant was associated with muscle weakness in some patients, the c.134delA and c.827G>C variants were associated with isolated HCM. Gene transfer of the latter variants in C2C12 myoblasts and cardiac myocytes revealed reduced levels of FHL1 mutant proteins, which could be rescued by proteasome inhibition. Contractility measurements after adeno-associated virus transduction in rat-engineered heart tissue (EHT) showed: (i) higher and lower forces of contraction with K45Sfs and C276S, respectively, and (ii) prolonged contraction and relaxation with both mutants. All mutants except one activated the fetal hypertrophic gene program in EHT. In conclusion, this study provides evidence for FHL1 to be a novel gene for isolated HCM. These data, together with previous findings of proteasome impairment in HCM, suggest that FHL1 mutant proteins may act as poison peptides, leading to hypertrophy, diastolic dysfunction and/or altered contractility, all features of HCM.

Automated analysis of contractile force and Ca2+ transients in engineered heart tissue.

Contraction and relaxation are fundamental aspects of cardiomyocyte functional biology. They reflect the response of the contractile machinery to the systolic increase and diastolic decrease of the cytoplasmic Ca(2+) concentration. The analysis of contractile function and Ca(2+) transients is therefore important to discriminate between myofilament responsiveness and changes in Ca(2+) homeostasis. This article describes an automated technology to perform sequential analysis of contractile force and Ca(2+) transients in up to 11 strip-format, fibrin-based rat, mouse, and human fura-2-loaded engineered heart tissues (EHTs) under perfusion and electrical stimulation. Measurements in EHTs under increasing concentrations of extracellular Ca(2+) and responses to isoprenaline and carbachol demonstrate that EHTs recapitulate basic principles of heart tissue functional biology. Ca(2+) concentration-response curves in rat, mouse, and human EHTs indicated different maximal twitch forces (0.22, 0.05, and 0.08 mN in rat, mouse, and human, respectively; P < 0.001) and different sensitivity to external Ca(2+) (EC50: 0.15, 0.39, and 1.05 mM Ca(2+) in rat, mouse, and human, respectively; P < 0.001) in the three groups. In contrast, no difference in myofilament Ca(2+) sensitivity was detected between skinned rat and human EHTs, suggesting that the difference in sensitivity to external Ca(2+) concentration is due to changes in Ca(2+) handling proteins. Finally, this study confirms that fura-2 has Ca(2+) buffering effects and is thereby changing the force response to extracellular Ca(2+).

Physiological aspects of cardiac tissue engineering.

Cardiac tissue engineering aims at repairing the diseased heart and developing cardiac tissues for basic research and predictive toxicology applications. Since the first description of engineered heart tissue 15 years ago, major development steps were directed toward these three goals. Technical innovations led to improved three-dimensional cardiac tissue structure and near physiological contractile force development. Automation and standardization allow medium throughput screening. Larger constructs composed of many small engineered heart tissues or stacked cell sheet tissues were tested for cardiac repair and were associated with functional improvements in rats. Whether these approaches can be simply transferred to larger animals or the human patients remains to be tested. The availability of an unrestricted human cardiac myocyte cell source from human embryonic stem cells or human-induced pluripotent stem cells is a major breakthrough. This review summarizes current tissue engineering techniques with their strengths and limitations and possible future applications.

Increased afterload induces pathological cardiac hypertrophy: a new in vitro model.

Increased afterload results in 'pathological' cardiac hypertrophy, the most important risk factor for the development of heart failure. Current in vitro models fall short in deciphering the mechanisms of hypertrophy induced by afterload enhancement. The aim of this study was to develop an experimental model that allows investigating the impact of afterload enhancement (AE) on work-performing heart muscles in vitro. Fibrin-based engineered heart tissue (EHT) was cast between two hollow elastic silicone posts in a 24-well cell culture format. After 2 weeks, the posts were reinforced with metal braces, which markedly increased afterload of the spontaneously beating EHTs. Serum-free, triiodothyronine-, and hydrocortisone-supplemented medium conditions were established to prevent undefined serum effects. Control EHTs were handled identically without reinforcement. Endothelin-1 (ET-1)- or phenylephrine (PE)-stimulated EHTs served as positive control for hypertrophy. Cardiomyocytes in EHTs enlarged by 28.4 % under AE and to a similar extent by ET-1- or PE-stimulation (40.6 or 23.6 %), as determined by dystrophin staining. Cardiomyocyte hypertrophy was accompanied by activation of the fetal gene program, increased glucose consumption, and increased mRNA levels and extracellular deposition of collagen-1. Importantly, afterload-enhanced EHTs exhibited reduced contractile force and impaired diastolic relaxation directly after release of the metal braces. These deleterious effects of afterload enhancement were preventable by endothelin-A, but not endothelin-B receptor blockade. Sustained afterload enhancement of EHTs alone is sufficient to induce pathological cardiac remodeling with reduced contractile function and increased glucose consumption. The model will be useful to investigate novel therapeutic approaches in a simple and fast manner.

Human engineered heart tissue as a model system for drug testing.

Drug development is time- and cost-intensive and, despite extensive efforts, still hampered by the limited value of current preclinical test systems to predict side effects, including proarrhythmic and cardiotoxic effects in clinical practice. Part of the problem may be related to species-dependent differences in cardiomyocyte biology. Therefore, the event of readily available human induced pluripotent stem cell (hiPSC)-derived cardiomyocytes (CM) has raised hopes that this human test bed could improve preclinical safety pharmacology as well as drug discovery approaches. However, hiPSC-CM are immature and exhibit peculiarities in terms of ion channel function, gene expression, structural organization and functional responses to drugs that limit their present usefulness. Current efforts are thus directed towards improving hiPSC-CM maturity and high-content readouts. Culturing hiPSC-CM as 3-dimensional engineered heart tissue (EHT) improves CM maturity and anisotropy and, in a 24-well format using silicone racks, enables automated, multiplexed high content readout of contractile function. This review summarizes the principal technology and focuses on advantages and disadvantages of this technology and its potential for preclinical drug screening.

Generation of strip-format fibrin-based engineered heart tissue (EHT).

This protocol describes a method for casting fibrin-based engineered heart tissue (EHT) in standard 24-well culture dishes. In principle, a hydrogel tissue engineering method requires cardiomyocytes, a liquid matrix that forms a gel, a casting mold, and a device that keeps the developing tissue in place. This protocol refers to neonatal rat heart cells as the cell source; the matrix of choice is fibrin, and the tissues are generated in rectangular agarose-casting molds (12 × 3 × 3 mm) prepared in standard 24-well cell culture dishes, in which a pair of flexible silicone posts is suspended from above. A master mix of freshly isolated cells, medium, fibrinogen, and thrombin is pipetted into the casting mold and, over a period of 2 h, polymerizes and forms a fibrin cell block around two silicone posts. Silicone racks holding four pairs of silicone posts each are used to transfer the fresh fibrin cell blocks into new 24-well dishes with culture medium. Without further handling, the cells start to remodel the fibrin gel, form contacts with each other, elongate, and condense the gel to approximately » of the initial volume. Spontaneous and rhythmic contractions start after 1 week. EHTs are viable and relatively stable for several weeks in this format and can be subjected to repeated measurements of contractile function and final morphological and molecular analyses.

In vitro perfusion of engineered heart tissue through endothelialized channels.

In engineered heart tissues (EHT), oxygen and nutrient supply via mere diffusion is a likely factor limiting the thickness of cardiac muscle strands. Here, we report on a novel method to in vitro perfuse EHT through tubular channels. Adapting our previously published protocols, we expanded a miniaturized fibrin-based EHT-format to a larger six-well format with six flexible silicone posts holding each EHT (15×25×3 mm³). Thin dry alginate fibers (17×0.04×0.04 mm) were embedded into the cell-fibrin-thrombin mix and, after fibrin polymerization, dissolved by incubation in alginate lyase or sodium citrate. Oxygen concentrations were measured with a microsensor in 14-day-old EHTs (37°C, 21% oxygen) and ranged between 9% at the edges and 2% in the center of the tissue. Perfusion rapidly increased it to 10%-12% in the immediate vicinity of the microchannel. Continuous perfusion (20 µL/h, for 3 weeks) of the tubular lumina (100-500 µm) via hollow posts of the silicone rack increased mean dystrophin-positive cardiomyocyte density (36%±6% vs. 10%±3% of total cell number) and cross sectional area (73±2 vs. 48±1 µm²) in the central part of the tissue compared to nonperfused EHTs. The channels were populated by endothelial cells present in the reconstitution cell mix. In conclusion, we developed a novel approach to generate small tubular structures suitable for perfusion of spontaneously contracting and force-generating EHTs and showed that prolonged perfusion improved cardiac tissue structure.