RESUMEN
Wave phenomena can be artificially engineered by scattering from metasurfaces, which aids in the design of radio-frequency and optical devices for wireless communication, sensing, imaging, wireless power transfer and bio/medical applications. Scattering responses vary with changing frequency; conversely, they remain unchanged at a constant frequency, which has been a long-standing limitation in the design of devices leveraging wave scattering phenomena. Here, we present metasurfaces that can scatter incident waves according to two variables-the frequency and pulse width-in multiple bands. Significantly, these scattering profiles are characterized by how the frequencies are used in different time windows due to transient circuits. In particular, by using more than one frequency with coupled transient circuits, we demonstrate variable scattering profiles in response to unique frequency sequences, which can break a conventional linear frequency concept and markedly increase the available frequency channels in accordance with a factorial number of frequencies used. Our proposed concept, which is analogous to frequency hopping in wireless communication, advances wave engineering in electromagnetics and related fields.
RESUMEN
We present the first use of a waveform-dependent absorbing metasurface for high-power pulsed surface currents. The new type of nonlinear metasurface, composed of circuit elements including diodes, is capable of storing high-power pulse energy to dissipate it between pulses, while allowing propagation of small signals. Interestingly, the absorbing performance varies for high-power pulses but not for high-power continuous waves (CW's), since the capacitors used are fully charged up. Thus, the waveform dependence enables us to distinguish various signal types (i.e., CW or pulse) even at the same frequency, which potentially creates new kinds of microwave technologies and applications.
RESUMEN
In this study, we numerically demonstrate how the response of recently reported circuit-based metasurfaces is characterized by their circuit parameters. These metasurfaces, which include a set of four diodes as a full wave rectifier, are capable of sensing different waves even at the same frequency in response to the incident waveform, or more specifically the pulse width. This study reveals the relationship between the electromagnetic response of such waveform-selective metasurfaces and the SPICE parameters of the diodes used. In particular, we draw conclusions about how the SPICE parameters are related to (1) the high-frequency operation, (2) input power requirement and (3) dynamic range of waveform-selective metasurfaces with supporting simulation results. First, we show that reducing a parasitic capacitive component of the diodes is important for realization of the waveform-selective metasurfaces in a higher frequency regime. Second, we report that the operating power level is closely related to the saturation current and the breakdown voltage of the diodes. Moreover, the operating power range is found to be broadened by introducing an additional resistor into the inside of the diode bridge. Our study is expected to provide design guidelines for circuit-based waveform-selective metasurfaces to select/fabricate optimal diodes and enhance the waveform-selective performance at the target frequency and power level. Our results are usefully exploited to ensure the selectivity based on the pulse duration of the incident wave in a range of potential applications including electromagnetic interference, wireless power transfer, antenna design, wireless communications, and sensing.
RESUMEN
Wireless communications and sensing have notably advanced thanks to the recent developments in both software and hardware. Although various modulation schemes have been proposed to efficiently use the limited frequency resources by exploiting several degrees of freedom, antenna performance is essentially governed by frequency only. Here, we present an antenna design concept based on metasurfaces to manipulate antenna performances in response to the time width of electromagnetic pulses. We numerically and experimentally show that by using a proper set of spatially arranged metasurfaces loaded with lumped circuits, ordinary omnidirectional antennas can be reconfigured by the incident pulse width to exhibit directional characteristics varying over hundreds of milliseconds or billions of cycles, far beyond conventional performance. We demonstrate that the proposed concept can be applied for sensing, selective reception under simultaneous incidence and mutual communications as the first step to expand existing frequency resources based on pulse width.
RESUMEN
This paper shows that customised broadband absorption of electromagnetic waves having arbitrary polarisation is possible by use of lossy cut-wire (CW) metamaterials. These useful features are confirmed by numerical simulations in which different lengths of CW pairs are combined as one periodic metamaterial unit and placed near to a perfect electric conductor (PEC). So far metamaterial absorbers have exhibited some interesting features, which are not available from conventional absorbers, e.g. straightforward adjustment of electromagnetic properties and size reduction. The paper shows how with proper design a broad range of absorber characteristics may be obtained.
Asunto(s)
Óptica y Fotónica , Absorción , Algoritmos , Simulación por Computador , Conductividad Eléctrica , Ensayo de Materiales , Metales/química , RadiaciónRESUMEN
We numerically demonstrate two types of metasurface absorbers to efficiently absorb digital signals. First, we show that the digital waveforms used in this study contain not only a fundamental wave but also nonnegligible harmonic waves, which limits the absorption performance of a conventional metasurface absorber operating in only a single, finite frequency band. The first type of the proposed absorbers is designed using two kinds of unit cells, each of which absorbs either a fundamental frequency or third harmonic of an incident digital waveform. This dual-band metasurface absorber exhibits absorption performance exceeding that of the conventional metasurface absorber and more strongly dissipates the energy of a digital waveform. In addition, the second type of absorber exploits the concept of nonlinear analogous circuits to convert an incoming wave to a different waveform, specifically, a triangular waveform that has a larger magnitude at a fundamental frequency. Therefore, the incoming waveform is more effectively absorbed by this waveform-conversion metasurface absorber as well. Although still there remain some issues to put these digital signal absorbers into practice, including experimental validation, our results contribute to mitigating electromagnetic interference issues caused by digital noise and realising physically smaller, lighter digital signal processing products for the next generation.
RESUMEN
We numerically demonstrate a new type of waveform-selective metasurface that senses the difference in incoming waveforms or pulse widths at the same frequency. Importantly, the proposed structure contains precise rectifier circuits that, compared to ordinary schottky diodes used within old types of structures, rectify induced electric charges at a markedly reduced input power level depending on several design parameters but mostly on the gain of operational amplifiers. As a result, a waveform-selective absorbing mechanism related to this turn-on voltage appears even with a limited signal strength that is comparable to realistic wireless signal levels. In addition, the proposed structure exhibits a noticeably wide dynamic range from [Formula: see text] 30 to 6 dBm, compared to a conventional structure that operated only around 0 dBm. Thus, our study opens up the door to apply the concept of waveform selectivity to a more practical field of wireless communications to control different small signals at the same frequency.
RESUMEN
Conventional materials vary their electromagnetic properties in response to the frequency of an incoming wave, but these responses generally remain unchanged at the same frequency unless nonlinearity is involved. Waveform-selective metasurfaces, recently developed by integrating several circuit elements with planar subwavelength periodic structures, allowed us to distinguish different waves even at the same frequency depending on how long the waves continued, namely, on their pulse widths. These materials were thus expected to give us an additional degree of freedom to control electromagnetic waves. However, all the past studies were demonstrated with waves at a normal angle only, although in reality electromagnetic waves scatter from various structures or boundaries and therefore illuminate the metasurfaces at oblique angles. Here we study angular dependences of waveform-selective metasurfaces both numerically and experimentally. We demonstrate that, if designed properly, capacitor-based waveform-selective metasurfaces more effectively absorb short pulses than continuous waves (CWs) for a wide range of the incident angle, while inductor-based metasurfaces absorb CWs more strongly. Our study is expected to be usefully exploited for applying the concept of waveform selectivity to a wide range of existing microwave devices to expand their functionalities or performances in response to pulse width as a new capability.
RESUMEN
In general electromagnetic response of each material to a continuous wave does not vary in time domain if the frequency component remains the same. Recently, it turned out that integrating several circuit elements including schottky diodes with periodically metallised surfaces, or the so-called metasurfaces, leads to selectively absorbing specific types of waveforms or pulse widths even at the same frequency. These waveform-selective metasurfaces effectively showed different absorbing performances for different widths of pulsed sine waves by gradually varying their electromagnetic responses in time domain. Here we study time-filtering effects of such circuit-based metasurfaces illuminated by continuous sine waves. Moreover, we introduce extra circuit elements to these structures to enhance the time-domain control capability. These time-varying properties are expected to give us another degree of freedom to control electromagnetic waves and thus contribute to developing new kinds of electromagnetic applications and technologies, e.g. time-windowing wireless communications and waveform conversion.
RESUMEN
Electromagnetic properties depend on the composition of materials, i.e. either angstrom scales of molecules or, for metamaterials, subwavelength periodic structures. Each material behaves differently in accordance with the frequency of an incoming electromagnetic wave due to the frequency dispersion or the resonance of the periodic structures. This indicates that if the frequency is fixed, the material always responds in the same manner unless it has nonlinearity. However, such nonlinearity is controlled by the magnitude of the incoming wave or other bias. Therefore, it is difficult to distinguish different incoming waves at the same frequency. Here we present a new concept of circuit-based metasurfaces to selectively absorb or transmit specific types of waveforms even at the same frequency. The metasurfaces, integrated with schottky diodes as well as either capacitors or inductors, selectively absorb short or long pulses, respectively. The two types of circuit elements are then combined to absorb or transmit specific waveforms in between. This waveform selectivity gives us another degree of freedom to control electromagnetic waves in various fields including wireless communications, as our simulation reveals that the metasurfaces are capable of varying bit error rates in response to different waveforms.