OP-1 augments glucocorticoid-inhibited fracture healing in a rat fracture model.

Glucocorticoids inhibit bone remodeling and fracture healing. We sought to determine whether osteogenic protein 1 (OP-1) can overcome this inhibition in a closed fracture model in the rat. Time-released prednisolone or placebo pellets were implanted subcutaneously; closed femoral fractures were created 2 weeks later in rats. Fractures received sham, OP-1 and collagen, or collagen-only implants. Femurs were harvested at 3, 10, 21, 28, and 42 days postfracture. Fractures were examined radiographically for amount of hard callus; mechanically for torque and stiffness (also expressed as a percentage of the contralateral intact femur); and histomorphometrically for amount of cartilaginous and noncartilaginous soft callus, hard callus, and total callus. Glucocorticoid administration inhibited fracture healing. The application of a devitalized Type I collagen matrix mitigated the inhibitory effects of prednisolone on fracture healing However, further increases in indices of fracture healing were observed when OP-1 was added to the collagen matrix compared with collagen alone. OP-1 and collagen was more effective than collagen alone.

Mechanical evaluation of various external skeletal fixator-intramedullary pin tie-in configurations using a tubular plastic bone model.

Use of external skeletal fixator-intramedullary pin tie-in (ESF-IM pin tie-in) fixators is an adjustable and effective method of fracture fixation in birds. The objective of this study was to evaluate the elements of the ESF-IM tie-in configuration used in birds. Ten variations of constructs were applied to a plastic bone model with a standard gap. Variants included non-tied and tie-in configurations, use of a 6- or 10-mm acrylic bar or a thermoplastic connecting bar, variation in the placement of the proximal fixation pin, use of 1.1-mm (0.045-in) or 1.6-mm (0.062-in) fixation pins, and configurations of 2, 3, or 4 fixation pins. The various constructs were loaded in bending, torque, and compression, and response variables were determined from resulting load-displacement curves (stiffness, load at 1-mm displacement). Results showed that, by using the tie-in configuration, increasing the diameter of the acrylic connecting bar, and increasing the diameter or number of fixation pins, each significantly increased the stiffness in all assessments. Placing the fixation pin distally in the proximal bone model segment increased the stiffness in bending, and adding a fixation pin to the distal bone model segment increased the stiffness in torque and bending. These results quantified the relative importance of specific parameters that effect stiffness and safe load of the ESF-IM tie-in construct as applied to a plastic bone fracture model.

Mechanical evaluation of external skeletal fixator-intramedullary pin tie-in configurations applied to cadaveral humeri from red-tailed hawks (Buteo jamaicensis).

Use of external skeletal fixator-intramedullary pin (ESF-IM) tie-in fixators is an adjustable and effective method of fracture fixation in birds. The objective of this study was to determine the contribution of each of the following parameters to the compressive and torsional rigidity of an ESF-IM pin tie-in applied to avian bones with an osteotomy gap: (1) varying the fixation pin position in the proximal bone segment and (2) increasing the number of fixation pins in one or both bone segments. ESF-IM pin tie-in constructs were applied to humeri harvested from red-tailed hawks (Buteo jamaicensis) (n=24) that had been euthanatized for clinical reasons. Constructs with a variation in the placement of the proximal fixation pin and with 2, 3, or 4 fixation pins applied to avian bone with an osteotomy gap were loaded to a defined displacement in torque and axial compression. Response variables were determined from resulting load-displacement curves (construct stiffness, load at 1-mm displacement). Increasing the number of fixation pins from 1 to 2 per bone segment significantly increased the stiffness in torque (110%) and compression (60%), and the safe load in torque (107%) and compression (50%). Adding a fixation pin to the distal bone segment to form a 3-pin fixator significantly increased the stiffness (27%) and safe load (20%) in torque but not in axial compression. In the configuration with 2 fixation pins, placing the proximal pin distally in the proximal bone segment significantly increased the stiffness in torque (28%), and the safe load in torque (23%) and in axial compression (32%). Results quantified the relative importance of specific parameters affecting the rigidity of ESF-IM pin tie-in constructs as applied to unstable bone fracture models in birds.

Clinical and pathologic analyses of bicipital tenosynovitis in dogs.

OBJECTIVE: To determine the clinical and pathologic findings in dogs with primary bicipital tenosynovitis. ANIMALS: 19 dogs with 20 shoulder joints treated surgically for bicipital tenosynovitis and 8 shoulder joints from 4 clinically normal dogs. PROCEDURE: Histologic abnormalities of tendon sheaths of the biceps brachii in affected dogs were determined by use of comparison with findings in clinically normal dogs. Specimens were graded for inflammation, fibrosis, villous hypertrophy, vascular prominence, and synovial cell proliferation. Histopathologic results were statistically evaluated for relationship with clinical findings and treatment before surgery. RESULTS: Synovial villous hypertrophy and vascular prominence were the most consistent histologic findings in 16 and 14 of 20 affected joints, respectively. Evidence of inflammation was lacking in 6 joints. Ten joints had inflammatory cell infiltration of the tendon sheath. Plasma cells and lymphocytes were the most common infiltrates; however, the type and amount of inflammatory cell infiltrate were variable. Fibrosis of the tendon sheath was seen in 8 joints, and synovial cell proliferation was seen in 11 joints. Other changes included accumulation of hemosiderin, focal calcification, osseous metaplasia, lysis of collagen, and fibrocartilaginous metaplasia. No significant relationship was detected between histopathologic findings and clinical findings or treatment before surgery. CONCLUSIONS AND CLINICAL RELEVANCE: Inflammation was more variable than hypothesized and may not be a consistent pathophysiologic feature of bicipital tenosynovitis. In some dogs, this disease may be the result of a degenerative process rather than an inflammatory process.

Absolute and relative cell counts for synovial fluid from clinically normal shoulder and stifle joints in cats.

OBJECTIVE: To determine absolute and relative cell counts for synovial fluid from grossly, radiographically, and histologically normal shoulder and stifle joints in healthy cats. DESIGN: Clinical study. ANIMALS: 52 cats scheduled to be euthanatized for unrelated reasons. PROCEDURE: Arthrocentesis of the shoulder and stifle joints was performed bilaterally, and synovial fluid was analyzed for absolute WBC count, WBC morphology, and percentages of neutrophils and mononuclear cells. Joints were examined grossly and radiographically, and synovial membrane specimens were submitted for histologic examination. Synovial fluid samples that were contaminated with blood and samples from joints with any gross, radiographic, or histologic abnormalities were excluded. RESULTS: 82 of the 208 synovial fluid samples were excluded because abnormalities were identified during physical examination; the volume of fluid obtained was insufficient for analysis; there was evidence of blood contamination; or the joint had gross, radiographic, or histologic abnormalities. Median WBC count for the remaining 126 synovial fluid samples was 91 cells/microL (96.4% mononuclear cells and 3.6% neutrophils); WBC count was not significantly different between left and right joint samples or between shoulder and stifle joint samples. Body weight was associated with synovial fluid WBC count, with WBC count increasing as body weight increased. Sixteen of the 52 (30%) cats had radiographic evidence of osteoarthritis involving at least 1 joint. CONCLUSIONS AND CLINICAL RELEVANCE: Results suggest that synovial fluid can be obtained reliably from shoulder and stifle joints in cats.

Fatigue analysis of plates used for fracture stabilization in small dogs and cats.

OBJECTIVE: To evaluate the fatigue life of stacked and single, veterinary cuttable plates (VCP) and small, limited contact, dynamic compression plates (LC-DCP). STUDY DESIGN: In vitro biomechanical study. METHODS: Fracture models (constructs; n = 8) were assembled for each of 6 groups all with 8-hole plates: 2.0 mm LC-DCP; 2.4 mm LC-DCP; single 1.5/2.0 mm VCP; stacked 1.5/2.0 mm VCP; single 2.0/2.7 mm VCP; and stacked 2.0/2.7 mm VCP. Plate(s) were secured to 2 polyvinylchloride pipe lengths, mounted in a testing system with a custom jig, and subjected to axial loading (10-100 N) for 1,000,000 cycles at 10 Hz or until failure. Differences in number of cycles to failure among groups were compared. Failure mode was determined. RESULTS: All LC-DCP and single VCP constructs failed before 1,000,000 cycles. Stacked 2.0/2.7 mm VCP constructs withstood 1,000,000 cycles without failure. ANOVA and Fisher's least significant difference tests demonstrated significantly more cycles to failure for the stacked 1.5/2.0 mm VCP and stacked 2.0/2.7 mm VCP compared with the single 1.5/2.0 mm VCP, single 2.0/2.7 mm VCP, 2.0 mm LC-DCP, or 2.4 mm LC-DCP. Constructs that failed did so through a screw hole adjacent to the gap. CONCLUSION: Stacked VCP constructs have greater fatigue lives than comparably sized LC-DCP or single VCP constructs. Plates with 2.4 mm screws were not significantly different from the comparable construct with 2.0 mm screws. CLINICAL RELEVANCE: Although these data reveal that stacked VCP create a superior construct with respect to cyclic fatigue, surgeons must decide whether this is a clinical advantage on a case-by-case basis.