[Research on Water Quality Analysis Model with PCA Method and UV Absorption Spectra].

Using the UV absorption spectrum to detect Organic pollutants content in water has become one of the most important methods for real-time online monitoring in the field of water quality inspection, however, the water complex and unstable components often bring much uncertain offset to the standard test. In this paper, water samples were classified firstly by analyzing UV absorption spectrum ranging from 200 nm to 400 µm including the organic substances, through the way of combining principal component analysis (PCA) with Euclidean distance. In this paper, we compared the Principal component analysis combined with partial least squares regression (PCA-PLSR) and the direct multi-wavelength absorption models combined with partial least squares regression (MWA-PLSR), not only for the real water sample but also for the analysis of different concentrations of COD standard solution. The result indicates that the measurement errors of the PCA is less than 5%, it is the smallest by using the first and second principal components as regression parameters for PLSR. Using the methods above can simultaneously achieve to classify of water samples and to measure the concentration of water quality parameters more accurately.

Quantitative anatomic basis of antegrade lag screw placement in posterior column of acetabulum.

BACKGROUND: Lag screw fixation has been recommended for treatment of acetabular and pelvic fracture for several years. The aim of the present study was to determine the projection of the axis of the posterior column on the inner table of the iliac wing in the supra-acetabular region. METHODS: Thirty adult dried bony hemipelves specimens and other five intact adult dried pelvic specimens were included in this study. The projection point of the axis of the posterior column of the acetabulum was determined on the inner table of the iliac wing of the hemipelves specimens. The perpendicular distance from the optimal entry point to the linea terminalis of pelvis was measured and recorded as the lateral distance. The same measurement along the linea terminalis from the optimal entry point to the junction between the anterior border of iliosacral articulation and the linea terminalis of pelvis was made and recorded as the posterior distance. The depth of the anchor path and the corresponding average retroversion angulation and extraversion angulation were also measured. According to the results acquired from this study, a series of 6.5 mm lag screws were inserted into the posterior column of each side of the other five intact specimens, respectively, to evaluate the position of the screws. The data were expressed as mean +/- SD and analyzed by using the descriptive methods with SPSS 10.0. RESULTS: The average length of lag screw was 104.8 +/- 4.2 mm. The average lateral distance was 16.8 +/- 2.1 mm. The average posterior distance was 23.5 +/- 3.4 mm. The corresponding average retroversion angulation and extraversion angulation were 57 degrees 36' +/- 4 degrees 28' and 119 degrees 18' +/- 2 degrees 32', respectively. The insertion of the single 6.5 mm lag screw of adequate length was possible in the posterior column along its anchor path and no accidental extraosseous or intraarticular screw placement had occurred. CONCLUSIONS: The present study describes a safe anchor path of antegrade lag screw fixation in the posterior column. Insertion of the lag screws of adequate length is possible in the posterior column along its functional axis.

[Clinical anatomic study of internal fixation of acetabular posterior column plate technique].

OBJECTIVES: To study the best entry points, direction and length of screw in acetabular posterior column plate technique, and to prevent the serious complications of screw penetrating the joint surface. METHODS: February to July 2008 20 male cadaveric adult semi-pelvic specimen were taken.Serial cross-sections of the acetabular posterior column were determined and made. The safe angle of screw entry and the length on all entry points of each cross-section were measured. And put all data into software SPSS 10.0 for statistics process. RESULTS: On margin of acetabulum, lateral-middle 1/4 point, midpoint, medial-middle 1/4 point and medial margin of posterior column of each cross-section, safe entry angle of inclination was 39 degrees , 57 degrees , 74 degrees , 90 degrees and 106 degrees respectively, the length of the screw was 39, 57, 74, 90 and 106 mm respectively. CONCLUSION: On lateral 1/4 region, lateral-middle 1/4 region, medial-middle 1/4 region and medial 1/4 region, screw posterior column angle is 40 degrees to 60 degrees , 60 degrees to 75 degrees , 75 degrees to 90 degrees , 90 degrees to parallel to the quadrilateral plate, and the length of the screw is 30 mm.

Calcitonin protects chondrocytes from lipopolysaccharide-induced apoptosis and inflammatory response through MAPK/Wnt/NF-κB pathways.

Calcitonin (CT) is an anti-absorbent, which has long been used for treatment of osteoporosis. However, little information is available about the effects of CT on osteoarthritis (OA). This study was mainly aimed to explore the effects of CT on the treatment of OA, as well as the underlying mechanisms. Chondrocytes were isolated from immature mice and then were incubated with lipopolysaccharide (LPS), CT, small interfering (si) RNA against bone morphogenetic protein (BMP)-2, and/or the inhibitors of MAPK/Wnt/NF-κB pathway. Thereafter, cell viability, apoptosis, nitric oxide (NO) and inflammatory factors productions, and expression levels of cartilage synthesis protein key factors, cartilage-derived morphogenetic protein (CDMP) 1, SRY (sex-determining region Y)-box 9 protein (SOX9), and MAPK/Wnt/NF-κB pathways key factors were determined. CT significantly reversed LPS-induced cell viability decrease, apoptosis increase, the inflammatory factors and NO secretion, the abnormally expression of cartilage synthesis proteins and the activation of MAPK/Wnt/NF-κB pathways (P<0.05). In addition, we observed that administration of the inhibitors of MAPK/Wnt/NF-κB pathways statistically further increased the levels of CDMP1 and SOX9 (P<0.05). Suppression of BMP-2 decreased the levels of CDMP1 and SOX9 and activated MAPK/Wnt/NF-κB pathways, and could partially abolish CT-modulated the expression changes in CDMP1 and SOX9, and MAPK/Wnt/NF-κB pathways key factors (P<0.05). The results showed that CT protects chondrocytes from LPS-induced apoptosis and inflammatory response by regulating BMP-2 and thus blocking MAPK/Wnt/NF-κB pathways.

[Anatomic study of internal fixation of acetabular anterior column plate technique].

OBJECTIVE: To study the best entry points, direction and length of screw in acetabular anterior column plate technique, and to prevent the serious complications of screw penetrating the joint surface. METHODS: Twenty male cadaveric adult semi-pelvic specimen were taken, and the distance from anterior acetabular margin, posterior acetabular margin to anterior inferior iliac spine, iliopubic eminence and pubic tubercle were measured respectively. Determine and make serial cross-sections of the acetabular anterior column, measure the safe angle of screw entry on all entry points of each cross-section, and put all data into software SPSS 10.0 for statistics process. RESULTS: The distance from anterior acetabular margin to anterior inferior iliac spine, iliopubic eminence and pubic tubercle was (25.4 +/- 1.4) mm, (11.8 +/- 0.7) mm and (37.4 +/- 1.5) mm respectively, the distance from posterior acetabular margin to anterior inferior iliac spine, iliopubic eminence was (15.5 +/- 0.9) mm and (29.1 +/- 1.6) mm respectively. On each cross-section, the maximum of the safe entry angle of inclination in 0.5 cm, 1.0 cm and 1.5 cm entry point lateral to the linea terminalis of pelvis was (8.2 +/- 2.2) degrees , (14.9 +/- 3.4) degrees and (26.1 +/- 4.5) degrees respectively. CONCLUSIONS: When plate for internal fixation on acetabular region of anterior column is used, there are three ways to avoid screw penetrating the joint surface. The first way is using short screw in any direction; the second way is using long screw close to the linea terminalis of pelvis, the direction of the screw is parallel to the quadrilateral plate; the third way is using different entry angle and length according to different entry point.

Tobacco smoke induces production of chemokine CCL20 to promote lung cancer.

Tobacco kills nearly 6 million people each year, and 90% of the annual 1.59 million lung cancer deaths worldwide are caused by cigarette smoke. Clinically, a long latency is required for individuals to develop lung cancer since they were first exposed to smoking. In this study, we aimed to identify clinical relevant inflammatory factors that are critical for carcinogenesis by treating normal human lung epithelial cells with tobacco carcinogen nicotine-derived nitrosaminoketone (NNK) for a long period (60 days) and systematic screening in 84 cytokines/chemokines. We found that a chemokine CCL20 was significantly up-regulated by NNK, and in 78/173 (45.1%) patients the expression of CCL20 was higher in tumor samples than their adjacent normal lung tissues. Interestingly, CCL20 was up-regulated in 48/92 (52.2%) smoker and 29/78 (37.2%) nonsmoker patients (p = 0.05), and high CCL20 was associated with poor prognosis. NNK induced the production of CCL20, which promoted lung cancer cell proliferation and migration. In addition, an anti-inflammation drug, dexamethasone, inhibited NNK-induced CCL20 production and suppressed lung cancer in vitro and in vivo. These results indicate that CCL20 is crucial for tobacco smoke-caused lung cancer, and anti-CCL20 could be a rational approach to fight against this deadly disease.