WFDC21P promotes triple-negative breast cancer proliferation and migration through WFDC21P/miR-628/SMAD3 axis.

Long non-coding RNAs (lncRNAs) modulate cell proliferation, cycle, and apoptosis. However, the role of lncRNA-WFDC21P in the tumorigenesis of triple-negative breast cancer (TNBC) remains unclear. Results of this study demonstrated that WFDC21P levels significantly increased in TNBC, which was associated with the poor survival of patients. WFDC21P overexpression significantly promoted TNBC cell proliferation and metastasis. WFDC21P interacted with miR-628-5p, which further suppressed cell proliferation and metastasis by negatively regulating Smad3-related gene expression. Recovery of miR-628-5p weakened the roles of WFDC21P in promoting the growth and metastasis of TNBC cells. Moreover,N6-methyladenosine (m6A) modification upregulated WFDC21P expression in the TNBC cells. WFDC21P and its m6A levels were increased after methyltransferase like 3 (METTL3) overexpression but reduced after METTL3 silencing. The proliferation and metastasis of TNBC cells were promoted by METTL3 overexpression but suppressed by METTL3 silencing. This study demonstrated the vital roles of WFDC21P and its m6A in regulating the proliferation and metastasis of TNBC cells via the WFDC21P/miR-628/SMAD3 axis.

MiR-205-5p promotes lung cancer progression and is valuable for the diagnosis of lung cancer.

BACKGROUND: MicroRNAs (miRNAs) function as potential diagnostic biomarkers in various cancers. This study aimed to evaluate the roles of miR-205-5p in lung cancer progression and diagnosis. MATERIALS AND METHODS: MiR-205-5p was detected by quantitative real-time PCR. The effect of miR-205-5p on cell proliferation and metastasis was estimated by MTT and flow cytometry. The expression of TP53INP1 and related genes was analyzed by immunoblotting. The diagnostic value of miR-205-5p was analyzed using receiver operating characteristic (ROC) curve analysis, sensitivity, and specificity. RESULTS: The miR-205-5p was increased in lung cancer tissues. MiR-205-5p mimics were promoted but its inhibitor suppressed cell proliferation and metastasis compared with control treatment in vitro and in vivo. By regulating the 3' untranslated region, miR-205-5p could negatively regulate TP53INP1 expression, which further inhibited the expression of RB1 and P21, but increased that of cyclinD1. Moreover, the serum miR-205-5p levels of patients with lung cancer were significantly higher than those of normal controls, and they were correlated with patients' gender, drinking status, and clinical stage. The area under the ROC curve of serum miR-205-5p in the diagnosis of non-small-cell lung cancer was 0.8250, respectively. The finding supported its possession of high diagnostic efficiency for lung cancer. CONCLUSIONS: MiR-205-5p promoted lung cancer cell proliferation and metastasis by negatively regulating the novel target TP53INP1, which further affected the expression of P21, RB1, and cyclin D1. Serum miR-205-5p is a novel and valuable biomarker for lung cancer diagnosis.

Roles of HOTAIR in lung cancer susceptibility and prognosis.

BACKGROUND: Long noncoding (lncRNA) single-nucleotide polymorphisms (SNPs) are associated with the susceptibility to the development of various malignant tumors. The aim of this study was to investigate the roles of HOX transcript antisense intergenic RNA (HOTAIR) and its SNPs in lung cancer. METHODS: Initially, the expression of HOTAIR in different tumors was investigated using the online Gene Expression Profiling Interactive Analysis (GEPIA) resource. Three SNPs (rs920778, rs1899663, and rs4759314) of HOTAIR were identified using the MassArray system. Following this, the relationship between these SNPs and susceptibility to lung cancer was investigated. RESULTS: Expression of HOTAIR was found to increase in a variety of cancers, including nonsmall cell lung cancer (NSCLC). We found that the genotypes of these SNPs (rs920778, rs1899663, and rs4759314) were not significantly associated with lung cancer type, family history, lymph node metastasis, or lung cancer stage. In gender stratification, the results of rs920778 genotypes showed that, compared to genotype AA, the AG (OR = 0.344, 95% CI: 0.133-0.893, p = .028) and AG + GG (OR = 0.378, 95% CI: 0.153-0.932, p = .035) genotypes of rs920778 are protective factors against NSCLC in females. In smoking stratification, compared with AA of rs920778, the genotype AG + GG (OR = 0.507, 95% CI: 0.263-0.975, p = .042) was a protective factor against NSCLC in nonsmoking people. No statistical differences were observed in the classifications of rs1899663 and rs4759314 genotypes. Linkage disequilibrium analysis revealed a high linkage disequilibrium between the rs920778 and rs1899663 (D' = 0.99, r2  = .74), rs920778 and rs4759314 (D' = 0.85, r2  = .13), and rs1899663 and rs4759314 (D' = 0.79, r2  = .00). CONCLUSION: Our study demonstrated that HOTAIR expression increased in NSCLC, and that the genotypes of rs920778 could be useful in the diagnosis and prognosis of lung cancer.

A photoresponsive molecularly imprinted polymer with rapid visible-light-induced photoswitching for 4-ethylphenol in red wine.

The trans to cis isomerization of the azobenzene chromophore in most azobenzene-based photoresponsive molecularly imprinted polymers (MIPs) is initiated by UV irradiation. This limits the application of these materials in cases where UV light toxicity is an issue, such as in biological systems, food monitoring, and drug delivery. Herein we report a tetra-ortho-methyl substituted azobenzene, (4-[(4-methacryloyloxy)-2,6-dimethyl phenylazo]-3,5-dimethyl benzenesulfonic acid (MADPADSA). The photoswitching of MADPADSA could be induced by visible-light irradiation (550 nm for trans to cis and 475 nm for cis to trans) in 4-hydroxyethylpiperazineethanesulfonic acid (HEPES) buffer-ethanol (4:1, v/v) at pH 7.0, however, the photoisomerization was slow. With the use of MADPADSA as a functional monomer, NaYF4:Yb3+,Er3+ as a substrate, 4-ethylphenol (4-EP) as a template, a novel photoresponsive surface molecularly imprinted polymer NaYF4:Yb3+,Er3+@MIP was obtained. The NaYF4:Yb3+,Er3+@MIP displayed rapid visible-light-induced photoswitching. The NaYF4:Yb3+,Er3+ substrate could efficiently increase the trans to cis isomerization rate of the photoresponsive MIP on its surface, which was faster than that of the corresponding azobenzene monomer MADPADSA. Possible reasons for this effect were investigated by fluorescence spectroscopy. NaYF4:Yb3+,Er3+@MIP displayed good specificity toward 4-EP with a specific binding constant (Kd) of 3.67 × 10-6 mol L-1 and an apparent maximum adsorption capacity (Qmax) of 10.73 µmol g-1, respectively. NaYF4:Yb3+,Er3+@MIP was applied to determine the concentration of 4-EP in red wine with good efficiency and a limit of detection lower than the value that could cause an unpleasant off-flavor.

Cisplatin decreases cyclin D2 expression via upregulating miR­93 to inhibit lung adenocarcinoma cell growth.

MicroRNAs (miRNAs/miRs) serve important roles in the chemotherapeutic effect of anticancer drugs. To investigate the roles of miRNAs in cisplatin­induced suppression of lung adenocarcinoma cell proliferation, A549 cells were treated with different concentrations of cisplatin. An MTT assay demonstrated that cisplatin inhibited A549 cell proliferation in a dose­dependent manner. Cisplatin induced cell apoptosis and inhibited cell migration by increasing the levels of miR­93, miR­26a and miR­26b. Furthermore, as an upstream factor, miR­93 was proposed to regulate cyclin D2 expression in miR­93­transfected A549 cells. Cisplatin also induced Bcl­2­associated X protein expression, and decreased that of Bcl­2 and c­Myc in lung adenocarcinoma cells. In vivo analysis further supported that cisplatin inhibited lung adenocarcinoma cell growth by regulating cyclin D2 and miR­93 expression. In conclusion, our findings demonstrated that cisplatin could effectively inhibit lung adenocarcinoma cell proliferation by decreasing cyclin D2 expression via miR­93.

A photoresponsive surface molecularly imprinted polymer shell for determination of trace griseofulvin in milk.

A new photoresponsive surface molecularly imprinted polymer shell (PMIPS) was developed for determination of trace griseofulvin from milk. The PMIPS was prepared by surface imprinting technique using poly(styrene-co-methacrylic acid) (PS-co-PMMA) microspheres as the sacrificial substrate, griseofulvin as the template, a photoresponsive azobenzene derivative 4-((4-(methacryloyloxy)phenyl)diazenyl)-3,5-dimethyl benzenesulfonic acid as the functional monomer, and triethanolamine trimethacrylate as the cross-linker. The PMIPS was obtained after the removal of the sacrificial PS-co-PMMA core from the surface imprinted core-shell microspheres, PS-co-PMAA@PMIP. Compared with PS-co-PMAA@PMIP, PMIPS displayed better properties such as higher surface area and pore volume, rapid photo-isomerization rate, and higher adsorption capacities, specific binding constant and binding density. The PMIPS could efficiently detect griseofulvin in complex samples such as milk.

Photoresponsive hollow molecularly imprinted polymer for trace triamterene in biological samples.

This paper reports a photoresponsive hollow molecularly imprinted polymer for the determination of trace triamterene in biological sample. The photoresponsive hollow molecularly imprinted polymer was prepared on sacrificial silica microspheres via surface imprinting technique through atom transfer radical polymerization using a novel water-soluble azobenzene derivative, 4-[(4-methacryloyloxy)phenylazo]-3,5-dimethyl benzenesulfonic acid, as the functional monomer, and the sacrificial silica core was subsequently removed using HF etching method with 1.25vol.% HF ethanolic solution. The morphologies and properties of the photoresponsive hollow molecularly imprinted polymer were further characterized and compared systematically with the corresponding photoresponsive surface molecularly imprinted polymer. Compared with surface imprinted polymer, the hollow material displayed higher binding capacity, better recognition ability, faster mass-transfer rate, and larger isomerization rate constants toward triamterene. The static binding properties of the imprinted materials were investigated under three irradiation conditions. The photoresponsive hollow molecularly imprinted polymer showed better specificity toward triamterene than its structural analogues (folic acid and caffeine) as examined by UV-vis and HPLC. The photoresponsive hollow molecularly imprinted polymer was utilized for the determination of trace triamterene in biological samples (human urine and serum) with advantages of simple sample pre-treatment, good recovery and good sensitivity.

Photoresponsive surface molecularly imprinted polymer on ZnO nanorods for uric acid detection in physiological fluids.

A photoresponsive surface molecularly imprinted polymer for uric acid in physiological fluids was fabricated through a facile and effective method using bio-safe and biocompatible ZnO nanorods as a support. The strategy was carried out by introducing double bonds on the surface of the ZnO nanorods with 3-methacryloxypropyltrimethoxysilane. The surface molecularly imprinted polymer on ZnO nanorods was then prepared by surface polymerization using uric acid as template, water-soluble 5-[(4-(methacryloyloxy)phenyl)diazenyl]isophthalic acid as functional monomer, and triethanolamine trimethacryl ester as cross-linker. The surface molecularly imprinted polymer on ZnO nanorods showed good photoresponsive properties, high recognition ability, and fast binding kinetics toward uric acid, with a dissociation constant of 3.22×10(-5)M in aqueous NaH2PO4 buffer at pH=7.0 and a maximal adsorption capacity of 1.45µmolg(-1). Upon alternate irradiation at 365 and 440nm, the surface molecularly imprinted polymer on ZnO nanorods can quantitatively uptake and release uric acid.

Review of the recent progress in photoresponsive molecularly imprinted polymers containing azobenzene chromophores.

Photoresponsive molecularly imprinted polymers (PMIPs) containing azobenzene have received wide research attention in recent years and made notable achievements. This article reviews the recent developments on PMIPs containing azobenzene. Topics include the following: (i) brief introduction of azobenzene, molecularly imprinted polymers, and PMIPs containing azobenzene; (ii) progress in functional monomers, cross-linkers, and polymerization conditions; (iii) preparation methods, properties, applications, as well as advantages and disadvantages of conventional PMIPs; (iv) substrate, preparation method, and applications of photoresponsive surface molecularly imprinted polymers; and (v) some perspectives for further development of PMIPs containing azobenzene.

Photocontrolled solid-phase extraction of guanine from complex samples using a novel photoresponsive molecularly imprinted polymer.

A novel photoresponsive molecularly imprinted polymer (MIP) was developed for the selective extraction of guanine from complex samples. The photoresponsive MIP was fabricated using guanine as the template, water-soluble 5-[(4-(methacryloyloxy)phenyl)diazenyl]isophthalic acid as the functional monomer, and water-soluble triethanolamine trimethacrylate as the cross-linker. The MIP displayed good selectivity toward guanine with a dissociation constant of (2.70 ± 0.16) × 10(-5) mol L(-1) in aqueous media. The density of the guanine-specific receptor sites in the MIP material was (4.49 ± 0.22)µmol g(-1). Quantitatively release and uptake of guanine by the MIP occurred with irradiation at 365 and 440 nm, respectively. The MIP could efficiently extract guanine from beer and then release it into aqueous media under photocontrol. This method could be used for selective separation and subsequent determination of a specific analytes from complex samples.