RESUMEN
The water swelling and subsequent solvent exchange including co-nonsolvency behavior of thin films of a doubly thermo-responsive diblock copolymer (DBC) are studied via spectral reflectance, time-of-flight neutron reflectometry, and Fourier transform infrared spectroscopy. The DBC consists of a thermo-responsive zwitterionic (poly(4-((3-methacrylamidopropyl) dimethylammonio) butane-1-sulfonate)) (PSBP) block, featuring an upper critical solution temperature transition in aqueous media but being insoluble in acetone, and a nonionic poly(N-isopropylmethacrylamide) (PNIPMAM) block, featuring a lower critical solution temperature transition in water, while being soluble in acetone. Homogeneous DBC films of 50-100 nm thickness are first swollen in saturated water vapor (H2O or D2O), before they are subjected to a contraction process by exposure to mixed saturated water/acetone vapor (H2O or D2O/acetone-d6 = 9:1 v/v). The affinity of the DBC film toward H2O is stronger than for D2O, as inferred from the higher film thickness in the swollen state and the higher absorbed water content, thus revealing a pronounced isotope sensitivity. During the co-solvent-induced switching by mixed water/acetone vapor, a two-step film contraction is observed, which is attributed to the delayed expulsion of water molecules and uptake of acetone molecules. The swelling kinetics are compared for both mixed vapors (H2O/acetone-d6 and D2O/acetone-d6) and with those of the related homopolymer films. Moreover, the concomitant variations of the local environment around the hydrophilic groups located in the PSBP and PNIPMAM blocks are followed. The first contraction step turns out to be dominated by the behavior of the PSBP block, whereas the second one is dominated by the PNIPMAM block. The unusual swelling and contraction behavior of the latter block is attributed to its co-nonsolvency behavior. Furthermore, we observe cooperative hydration effects in the DBC films, that is, both polymer blocks influence each other's solvation behavior.
RESUMEN
The water vapor-induced swelling, as well as subsequent phase-transition kinetics, of thin films of a diblock copolymer (DBC) loaded with different amounts of the salt NaBr, is investigated in situ. In dilute aqueous solution, the DBC features an orthogonally thermoresponsive behavior. It consists of a zwitterionic poly(sulfobetaine) block, namely, poly(4-(N-(3'-methacrylamidopropyl)-N,N-dimethylammonio) butane-1-sulfonate) (PSBP), showing an upper critical solution temperature, and a nonionic block, namely, poly(N-isopropylmethacrylamide) (PNIPMAM), exhibiting a lower critical solution temperature. The swelling kinetics in D2O vapor at 15 °C and the phase transition kinetics upon heating the swollen film to 60 °C and cooling back to 15 °C are followed with simultaneous time-of-flight neutron reflectometry and spectral reflectance measurements. These are complemented by Fourier transform infrared spectroscopy. The collapse temperature of PNIPMAM and the swelling temperature of PSBP are found at lower temperatures than in aqueous solution, which is attributed to the high polymer concentration in the thin-film geometry. Upon inclusion of sub-stoichiometric amounts (relative to the monomer units) of NaBr in the films, the water incorporation is significantly increased. This increase is mainly attributed to a salting-in effect on the zwitterionic PSBP block. Whereas the addition of NaBr notably shifts the swelling temperature of PSBP to lower temperatures, the collapse temperature of PNIPMAM remains unaffected by the presence of salt in the films.
RESUMEN
The investigation of the response kinetics of smart colloidal microgel films is crucial for their optimization to enable advanced applications. We study the classical thermoresponsive microgel model system N-isopropylacrylamide cross-linked with N,N'-methylenebisacrylamide. Without the typically used polyelectrolyte coating of the substrate, thin microgel films are prepared in a single spin-coating step. Atomic force microscopy measurements reveal an extremely dense packing, resulting in a homogeneous compact thin film of microgel particles. The hydration kinetics of these films in H2O and D2O atmospheres as well as the kinetics of the solvent exchange between both water species are investigated with in situ time-of-flight neutron reflectometry (TOF-NR) and in situ Fourier-transform infrared (FTIR) spectroscopy. With accounting for a nonconstant humid atmosphere, the intrinsic diffusion dynamics of water molecules into the thin microgel film are modeled and the specific time constant τ and the effective Flory-Huggins interaction parameter χeff are determined. Comparing the results in H2O and D2O atmospheres, TOF-NR and FTIR spectroscopy results show an increased affinity of the microgel films toward H2O as compared to D2O. From the FTIR spectroscopy data, we further identify different kinetics of intermolecular processes and order them according to their temporal evolution.
RESUMEN
Climate change carries important effects on human wellbeing and performance, and increasingly research is documenting the negative impacts of out-of-comfort temperatures on workplace performance. In this study, we investigate the plausibly causal effect of extreme temperatures, i.e., out-of-comfort, on language complexity among politicians, leveraging a fixed effects strategy. We analyze language complexity in over seven million parliamentary speeches across eight countries, connecting them with precise daily meteorological information. We find hot days reduce politicians' language complexity, but not cold days. Focusing on one country, we explore marginal effects by age and gender, suggesting high temperatures significantly impact older politicians at lower thresholds. The findings propose that political rhetoric is not only driven by political circumstances and strategic concerns but also by physiological responses to external environmental factors. Overall, the study holds important implications on how climate change could affect human cognitive performance and the quality of political discourse.
RESUMEN
Research shows that emotions matter in politics, and they matter during a public health crisis. Yet, a comprehensive analysis of emotional political rhetoric during the COVID-19 crisis is still missing. Based on parties' position in the political arena (government versus populist radical parties), I expect differences in how specific emotions are employed and in how these messages actually influence the public. To test my hypotheses, I use word embeddings and neural network classifiers to measure fear and hope appeals in social media messages of political parties in four European countries. Furthermore, I rely on more than 1,400,000 public tweets of random citizens to estimate the impact of party messages. To do so, I employ vector autoregression (VAR) analysis to compare retweet volumes of political messages to emotional expressions in public tweets. Results indicate two main findings, (1) populist radical parties communicate less about the pandemic and decrease fear and increase hope appeals while COVID case numbers are rising whereas government parties exhibit the opposite pattern; (2) increased diffusion of party tweets consistently precedes change in partisans' emotional expressions the following day. The findings can carry important implications for (affective) polarization and the level of protective behavior among the population.
RESUMEN
In neutron scattering on soft matter, an important concern is the control and stability of environmental conditions surrounding the sample. Complex sample environment setups are often expensive to fabricate or simply not achievable by conventional workshop manufacturing. We make use of state-of-the-art 3D metal-printing technology to realize a sample environment for large sample sizes, optimized for investigations on thin film samples with neutron reflectometry (NR) and grazing-incidence small-angle neutron scattering (GISANS). With the flexibility and freedom of design given by 3D metal-printing, a spherical chamber with fluidic channels inside its walls is printed from an AlSi10Mg powder via selective laser melting (SLM). The thin channels ensure a homogeneous heating of the sample environment from all directions and allow for quick temperature switches in well-equilibrated atmospheres. In order to optimize the channel layout, flow simulations were carried out and verified in temperature switching tests. The spherical, edgeless design aids the prevention of condensation inside the chamber in case of high humidity conditions. The large volume of the sample chamber allows for high flexibility in sample size and geometry. While a small-angle neutron scattering (SANS) measurement through the chamber walls reveals a strong isotropic scattering signal resulting from the evenly orientated granular structure introduced by SLM, a second SANS measurement through the windows shows no additional background originating from the chamber. Exemplary GISANS and NR measurements in time-of-flight mode are shown to prove that the chamber provides a stable, background free sample environment for the investigation of thin films.
RESUMEN
The orientation of block copolymer (BCP) features in thin films can be obtained by spin-coating a BCP solution on a substrate surface functionalized by a polymer brush layer of the appropriate random copolymer (RCP). Although this approach is well established, little work reporting the amount and distribution of residual solvent in the polymer film after the spin-coating process is available. Moreover, no information can be found on the effect of trapped solvent on the interface between the BCP film and RCP brush. In this work, systems consisting of poly(styrene)-b-poly(methyl methacrylate) thin films deposited on poly(styrene-r-methyl methacrylate) brush layers are investigated by combining neutron reflectivity (NR) experiments with simulation techniques. An increase in the amount of trapped solvent is observed by NR as the BCP film thickness increases accompanied by a significant decrease of the interpenetration length between the BCP and RCP, thus suggesting that the interpenetration between grafted chains and block copolymer chains is hampered by the solvent. Hybrid particle-field molecular dynamics simulations of the analyzed system confirm the experimental observations and demonstrate a clear correlation between the interpenetration length and the amount of trapped solvent.
RESUMEN
Hybrid films of zinc oxide (ZnO) and poly(3-hexylthiophen-2,5-diyl) (P3HT) show promising characteristics for application in hybrid bulk-heterojunction solar cells (HBSCs). However, the incompatibility of ZnO and P3HT may lead to a reduced interface area, thus reducing the probability of exciton separation and consequently lowering solar cell efficiencies. Here, a diblock copolymer P3HT- b-poly(ethylene oxide) (PEO) is introduced to improve the interface between ZnO and P3HT. ZnO is synthesized via a block copolymer assisted sol-gel approach, and the used zinc precursor is directly incorporated into the PEO blocks. Thus, the possibility of aggregation is reduced for both the inorganic and the organic components, and a good intermixing is ascertained. Two deposition methods, namely, spray and spin coating, are compared with respect to the resulting film structure, which is investigated with scanning electron microscopy and time-of-flight grazing-incidence small-angle neutron scattering measurements. Both the surface and inner morphologies reveal that the spin coated samples possess smaller and less diverse domain sizes than the sprayed films. Due to the advantage of spray coating in large-scale production, the morphology of the sprayed samples is tailored more meticulously by changing the weight fraction of ZnO in the films. The sprayed hybrid films show smaller domains and less aggregation with decreasing the amount of ZnO. This reveals that both the deposition method and composition of the ZnO/P3HT/P3HT- b-PEO hybrid films play an important role for tailoring the film morphology and thus for improving the performance of HBSCs in future application.
RESUMEN
Polymer electrodes made of poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) are used in many applications but are also sensitive to humidity. We study humidity-induced changes of PEDOT:PSS electrodes as monitored with in situ time-of-flight neutron reflectivity (TOF-NR) measurements under high humidity conditions. The influence of the solvent additive Zonyl and a post-treatment of PEDOT:PSS films with ethylene glycol (EG) serving as electrodes are analyzed with respect to the swelling ratio and water uptake. Depending on the applied PEDOT:PSS treatment, PEDOT and PSS enrichment layers are clearly identified with TOF-NR at the substrate-polymer and polymer-air interface, respectively. The additive Zonyl reduces the water uptake and limits film swelling. EG post-treatment further increases hydrophobicity and thereby water incorporation into the PEDOT:PSS film is strongly suppressed. The characteristic time constants and effective interaction parameters extracted from the kinetic NR data show that additive and post-treatment reduce the sensitivity of the PEDOT:PSS electrodes to humidity.