RESUMEN
Graphene aerogel (GA) has important application potential as piezoresistive sensors due to its low density, high conductivity, high porosity, and good mechanical properties. However, the fabrication of GA-based sensors with good mechanical properties and excellent sensing performance is still challenging. Herein, liquid- metal-modified GAs (GA/LM) are proposed for the development of an excellent GA-based sensor. GA/LM with three-dimensional interconnected layered structure exhibits excellent compressive stress of 41â KPa and fast response time (<20â ms). While generally flexible GA composites cannot be compressed beyond 80 % strain without plastic deformation, GA/LM demonstrates a high compressive strength of 60â kPa under a strain of 90 %. A real-time pressure sensor was fabricated based on GA/LM-2 to monitor swallowing, pulse beating, finger, wrist and knee bending, and even plantar pressure during walking. These excellent features enable potential applications in health detection.
RESUMEN
Nowadays, two of the biggest obstacles restricting the further development of methanol fuel cells are excessive cost and insufficient catalytic activity of platinum-based catalysts. Herein, platinum nanoparticle supported graphene aerogel (Pt/3DGA) was successfully synthesized by a one-step hydrothermal self-assembly method. The loose three-dimensional structure of the aerogel is stabilized by a simple one-step method, which not only reduces cost compared to the freeze-drying technology, but also optimizes the loading method of nanoparticles. The prepared Pt/3DGA catalyst has a three-dimensional porous structure with a highly cross-linked, large specific surface area, even dispersion of Pt NPs and good electrical conductivity. It is worth noting that its catalytic activity is 438.4 mA/mg with long-term stability, which is consistent with the projected benefits of anodic catalytic systems in methanol fuel cells.. Our study provides an applicable method for synthesizing nano metal particles/graphene-based composites.