RESUMEN
The LiCoO2 (LCO) cathode is foreseen for extensive commercial applications owing to its high specific capacity and stability. Therefore, there is considerable interest in further enhancing its specific capacity by increasing the charging voltage. However, single-crystal LCO suffers from a significant capacity degradation when charged to 4.5 V due to the irreversible phase transition and unstable structure. Herein, an ultra-small amount (0.5% wt. in the electrode) of multi-functional PIM-1 (a polymer with intrinsic microporosity) additive is utilized to prepare a kind of binder-free electrode. PIM-1 modulates the solvation structure of LiPF6 due to its unique structure, which helps to form a stable, robust, and inorganic-rich cathod-eelectrolyte interphase (CEI) film on the surface of LCO at a high voltage of 4.5 V. This reduces the irreversible phase transition of LCO, thereby enhancing the cyclic stability and improving the rate performance, providing new perspectives for the electrodes fabrication and improving LCO-based high-energy-density cathodes.
RESUMEN
To mitigate the environmental impact of the improper disposal of spent LiFePO4 batteries and reduce resource waste, the development of LiFePO4 recycling technologies is of paramount importance. Meanwhile, olivine-structured NaFePO4 in sodium-ion batteries has received great attention, due to its high theoretical specific capacity of 154 mAh g-1 and excellent stability. However, olivine NaFePO4 only can be synthesized from olivine LiFePO4. Accordingly, in this proposal, developing the continuous flow electrochemical solid-liquid reactor-based metal ion insertion technology is to utilize the olivine FePO4, recycled from LiFePO4, and to synthesize NaFePO4. Additionally, by employing I- as the reducing agent, NaFePO4 is successfully synthesized with a discharge-specific capacity of 134 mAh g-1 at 0.1C and a remarkable capacity retention rate of 86.5% after 100 cycles at 0.2C. And the reasons for sodium deficiency in the synthesized NFP are elucidated through first-principles calculations. Furthermore, the kinetics of the solid-solution reaction 2 (Na2/3+ßPO4â Na1-αFePO4) mechanism improve with cycling and are sensitive to temperature. Utilizing a minimal amount of reducing agent in the electrochemical reactor, NaFePO4 synthesis is successfully achieved. This innovative approach offers a new, cost-effective, and environmentally friendly strategy for preparing NaFePO4 from recycling LiFePO4.
RESUMEN
Na-based layered transition metal oxides with an O3-type structure are considered promising cathodes for sodium-ion batteries. However, rapid capacity fading, and poor rate performance caused by serious structural changes and interfacial degradation hamper their use. In this study, a NaPO3 surface modified O3-type layered NaNi1/3 Fe1/3 Mn1/3 O2 cathode is synthesized, with improved high-voltage stability through protecting layer against acid attack, which is achieved by a solid-gas reaction between the cathode particles and gaseous P2 O5 . The NaPO3 nanolayer on the surface effectively stabilizes the crystal structure by inhibiting surface parasitic reactions and increasing the observed average voltage. Superior cyclic stability is exhibited by the surface-modified cathode (80.1% vs 63.6%) after 150 cycles at 1 C in the wide voltage range of 2.0 V-4.2 V (vs Na+ /Na). Moreover, benefiting from the inherent ionic conduction of NaPO3 , the surface-modified cathode presents excellent rate capability (103 mAh g-1 vs 60 mAh g-1 ) at 10 C. The outcome of this study demonstrates a practically relevant approach to develop high rate and durable sodium-ion battery technology.
RESUMEN
Nickel-rich layered oxide cathodes, such as LiNi0.5Co0.2Mn0.3O2 (NCM523), are prevalent in high-power batteries owing to their high energy density. However, these cathodes suffer from undesirable side reactions occurring at the cathode/liquid electrolyte interface, leading to inferior interface stability and poor cycle life. To address these issues, herein, an amphiphilic diblock copolymer poly(dimethylsiloxane)-block-poly(acrylic acid) (PDMS-b-PAA) along with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) is utilized for modifying the electrode surface. This modification causes a thin and stable cathode-electrolyte interface (CEI) on the surface of NCM523 particles, as evidenced by XPS, TEM, and EIS analysis. The introduction of this modified interface successfully suppresses the capacity fading of NCM523. After 200 cycles at a rate of 1.0 C, the capacity of the modified NCM523 cathode is 108.7 mAh g-1, with a capacity retention of 82.8%, while the control samples without the polymer modification display a capacity retention of 72.7%. These results outline the distinct advantage of electrode surface modification with diblock copolymers/LiTFSI for the stabilization of Ni-rich layered oxide cathodes.
RESUMEN
Ultrafine SnO2/Sn nanoparticles encapsulated into an adjustable meso-/macroporous carbon matrix have been successfully fabricated by the in situ SiOx sacrificial strategy. The control over the void space in the carbon matrix effectively improves the accessibility of the SnO2/Sn toward an electrolyte solution. More importantly, the void space also provides an efficient means to accommodate the mechanical stress caused by the volume change of the SnO2/Sn over cycles. As a result, the enhanced electrolyte accessibility and suppressed mechanical stress improve the electrochemical performance regarding reversible capacity, cyclic stability, and rate capability. A reversible capacity of 1105 mAh g-1 is still retained after 290 cycles at 200 mAg-1, and the capacity still can keep at 107 mAh g-1 at a high current density of 10 A g-1.
RESUMEN
Porous silicon-based anode materials have gained much interest because the porous structure can effectively accommodate volume changes and release mechanical stress, leading to improved cycling performance. Magnesiothermic reduction has emerged as an effective way to convert silica into porous silicon with a good electrochemical performance. However, corrosive HF etching is normally a mandatory step to improve the electrochemical performance of the as-synthesized silicon, which significantly increases the safety risk. This has become one of the major issues that impedes practical application of the magnesiothermic reduction synthesis of the porous silicon anode. Here, a facile HF-free method is reported to synthesize macro-/mesoporous silicon with good cyclic and rate performance by simply increasing the reduction temperature from 700 °C to 800 °C and 900 °C. The mechanism for the structure change resulting from the increased temperature is elaborated. A finite element simulation indicated that the 3D continuous structure formed by the magnesiothermic reduction at 800 °C and 900 °C could undertake the mechanical stress effectively and was responsible for an improved cyclic stability compared to the silicon synthesized at 700 °C.
RESUMEN
Silicon anodes have attracted much attention owing to their high theoretical capacity. Nonetheless, an inevitable and enormous volumetric expansion of silicon in the lithiated state restrained the development of the silicon anode for lithium-ion batteries. Fortunately, the utilization of the high-performance binder is a promising and effective way to overcome such obstacles. Herein, a polymer of intrinsic microporosity (PIM) is applied as the binder for the silicon anode, which is composed of a rigid polymer backbone, an intrinsic porous structure, and active carboxyl groups (PIM-COOH). Compared to the traditional binder, both the long-term stability and rate performance of the electrode using PIM-COOH as the binder are significantly improved. The mechanism responsible for the enhanced performance is investigated. The PIM-COOH binder provides stronger adhesion toward the current collector than the conventional binders. The unique rigid polymer backbone and porous structure of the PIM-COOH binder enable a good capability to withstand the volume change and external stress generated by the Si anode. The porous structure of the PIM-COOH binder enhances lithium-ion transportation compared to the SA binder, which improves rate performance of the silicon anode. This work provides a unique insight into design, synthesis, and utilization of the binders for lithium-ion batteries.
RESUMEN
A lithium-rich cathode material Li1.14 Mn0.54 Ni0.14 Co0.14 O2 (LNMCO) is prepared by a co-precipitation method. The issue of voltage decay in long-term cycling is largely eliminated by control of the charge-discharge voltage range. The LNMCO material exhibits 9.8 % decay in discharge voltage over 200â cycles between 2.0-4.6â V, during which the working voltage decays significantly, from 3.57 V to 3.22 V. The decay was decelerated by a factor of six by using a voltage window of 2.0-4.4â V, from 3.53â V to 3.47â V. IR and Raman spectra reveal that the transformation of layered structure to spinel is significantly retarded under 2.0-4.4 V cycling conditions. Transmission electron microscopy (TEM) was also applied for examining phase change in an individual particle during cycling, showing that the spinel phase occurs both at 2.0-4.6â V and at 2.0-4.4â V, but is not dominant in the latter. Normalization of Li can remove the additional impact on the voltage decay which is brought by different amounts of Li intercalation. The mechanism of no voltage decay at 2.0-4.4â V cycling is raised and electrochemical impedance spectrum data also support the hypothesis.
RESUMEN
Lithium-ion batteries (LIBs) are known for their high energy density but exhibit poor cyclic stability and safety risks due to side reactions between the electrode and electrolyte. To address these issues, a novel approach involving construction of a polymer coating layer (PCL) via in situ self-polymerization using 2,2,3,4,4,4-hexafluorobutyl methacrylate (HFBM) as an electrolyte additive on the cathode is proposed. The PCL endows the electrolyte with a high onset oxidation potential (4.78 V) and lithium-ion transference number (0.52). The uniform and robust in situ constructed PCL can effectively inhibit the severe irreversible side reactions and suppress harmful reactions, thus providing a protective barrier against degradation. The resulting Li||LiNi0.8Co0.1Mn0.1O2 batteries exhibit an improved discharge capacity retention of 80% at 1C over 100 cycles. These results demonstrate that the in situ self-polymerization strategy holds promising potential for enhancing LIB performance and long-term stability, especially when high-voltage cathode materials are used.
RESUMEN
Ni-rich cathode materials exhibit superior energy densities and have attracted interest among both research and industrial fields; whereas, their practical application is hindered by the intrinsic drawbacks brought by the high nickel content such as structural instability and rapid capacity fading. Herein, in situ formation of a LiBO2 coating layer and spinel phase layer is achieved on the surface of a Ni-rich cathode material via a boric acid etching method at the precursor state. The spinel phase is considered to have a 3D lithium diffusion tunnel and hence faster diffusion kinetics. Moreover, the LiBO2 layer possesses excellent (electro)chemical inertness and can suppress electrolyte decomposition, resulting in a more inorganic and stable cathode-electrolyte interface. The surface reconstructed sample exhibits better cyclic stability (93.3% capacity retention vs 85.3% for the pristine sample at 1 C for 100 cycles) and rate performance. The superiority of this surface reconstruction is demonstrated by a series of electrochemical techniques and characterization methods including high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), post-mortem X-ray photoelectron spectroscopy (XPS) analysis, and density functional theory (DFT) calculations.
RESUMEN
Niobium pentoxides (Nb2O5) present great potential as next-generation anode candidates due to exceptional lithium-ion intercalation kinetics, considerably high capacity, and reasonable redox potential. Although four phases of Nb2O5 including hexagonal, orthorhombic, tetragonal, and monoclinic polymorphs show diverse characteristics in electrochemical performance, stable lifetime, high specific capacity, and fast intercalation properties cannot be delivered simultaneously with a single phase. Herein, this issue is addressed by generating a homogeneous mixture of orthorhombic and monoclinic crystals at the nanoscale. Reversible lithium-ion intercalation/deintercalation of the monoclinic phase is achieved, and exceptional lithium storage sites are created at the interface of the two phases. As a result, electrochemical features of stable lifetime from the orthorhombic phase and high specific performance from the monoclinic phase are harmoniously combined. This dual-phase Nb2O5/C nanohybrids deliver as high as 380 mA h g-1 (0.01-3.0 V) and 184 mA h g-1 (1.0-3.0 V) after 200 cycles. The essential principle of property enhancement is further confirmed through in situ XRD measurements and DFT calculations. The dual-phase concept can be further applied on electrodes with multiphases to achieve high electrochemical performance.
RESUMEN
The irreversible capacity loss of lithium-ion batteries during initial cycling directly leads to a decrease in energy density, and promising lithium cathode replenishment can significantly alleviate this problem. In response to the problems of complex preparation, instability in air, and unfavorable residue of the conventional cathode lithium replenishment materials, a Li2CO3/carbon nanocomposite is prepared and utilized as the lithium replenishment material. With high-speed ball-milling, a nanocomposite with a tight embedment structured Li2CO3/Ketjen Black (KB) composite composed of nanosized Li2CO3 and KB is synthesized. The decomposition potential of Li2CO3 is effectively decreased to 3.8 V, and the amount of the active lithium ion being released is significantly increased, corresponding to a specific capacity of 645.2 mAh·g-1 during the initial charging cycle. It has been introduced into the full-cells composed of the NCM523 cathode and graphite anode, resulting in a capacity increase of 44 mAh·g-1 in the initial cycle and a 26.4% improvement in capacity retention over 100 cycles. The working mechanism of the Li2CO3/KB nanocomposite as the lithium replenishment agent has been discussed. The outcome of the work provides a practically feasible route to realize lithium-ion battery technology with improved energy density and cycling life.
RESUMEN
A layered Li[NixCoyMn1-x-y]O2 (NCM)-based cathode is preferred for its high theoretical specific capacity. However, the two main issues that limit its practical application are severe safety issues and excessive capacity decay. A new electrode processing approach is proposed to synergistically enhance the electrochemical and safety performance. The polyimide's (PI) precursor is spin-coated on the LiNi0.5Co0.2Mn0.3O2 (NCM523) electrode sheet, and the homogeneous sulfonated PI layer is in situ produced by thermal imidization reaction. The PI-spin coated (PSC) layer provides improvements in capacity retention (86.47% vs 53.77% after 150 cycles at 1 C) and rate performance (99.21% enhancement at 5 C) as demonstrated by the NCM523-PSC||Li half-cell. The NCM523-PSC||graphite pouch full cell proves enhanced capacity retention (76.62% vs 58.58% after 500 cycles at 0.5 C) as well. The thermal safety of the NCM523-PSC cathode-based pouch cell is also significantly improved, with the critical temperature of thermal safety T1 (the beginning temperature of obvious self-heating temperature) and thermal runaway temperature T2 increased by 60.18 and 44.59 °C, respectively. Mechanistic studies show that the PSC layer has multiple effects as a passivation layer such as isolation of electrode-electrolyte contact, oxygen release suppression, solvation structure tuning, and the decomposition of carbonate solvents as well as LiPF6 inhibition. This work provides a new path for a cost-effective and scalable design of electrode decoration with synergistic safety-electrochemical kinetics enhancement.
RESUMEN
The conventional lithium-ion battery technology relies on the liquid carbonate-based electrolyte solution, which causes excessive side reactions, serious risk of electrolyte leakage, high flammability, and significant safety hazards. In this work, phosphonate-functionalized imidazolium ionic liquid (PFIL) is synthesized and used as a gel polymer electrolyte (GPE) to replace the organic carbonate-based electrolyte solution. The as-prepared ionic liquid-based gel polymer electrolyte (IL-GPE) shows low crystallinity, flame retardance, and excellent electrochemical performance. Thanks to the fast double channel transport of lithium ions in the IL-GPE electrolyte, a high ionic conductivity of 0.48 mS cm-1 and a lithium-ion transference number of 0.37 are exhibited. Symmetrical lithium cells with IL-GPE retain stable cycling even after 3000 h under 0.1 mA cm-2. IL-GPE exhibits good compatibility toward lithium metal, yielding excellent long-term electrochemical kinetic stability. IL-GPE induces the formation of a uniform and robust SEI layer, inhibiting the growth of lithium dendrites and improving the rate performance and cycle stability. Furthermore, Li/LiFePO4 cells exhibit a specific capacity of 63 mA h g-1 after 150 cycles at 5.0 C, with a capacity retention of 90.2%. It is foreseen that this GPE is a promising candidate to enhance the safety of high-performance lithium metal batteries.
RESUMEN
Nanosized silicon has attracted considerable attentions as a new-generation anode material for lithium-ion batteries (LIBs) due to its exceptional theoretical capacity and reasonable cyclic stability. However, serious side reactions often take place at the nanosized silicon/electrolyte interface in LIBs, where critical electrochemical properties such as initial Coulombic efficiency (ICE) are compromised. On the basis of this feature, a new method is developed to synthesize nanosilicon-based particles in a facile, scalable way, which are endowed with the function of prelithiation and storage stability in air. A semisolid lithium rechargeable flow battery (SSFB) technology is used for the first time to convert the micrometer-sized silicon raw material into an amorphous-nanosilicon-based material (ANSBM), as a result of the pulverization process induced by the repeated lithiation/delithiation cycles. The particle size is successfully reduced from 1-4 µm to around 30 nm after cycles in the flow battery. Bulk functionalization of the nano silicon is introduced by the unbalanced lithiation/delithiation cyclic process, which endows ANSBM with a unique prelithiation capability universally applicable to different anode systems such as nanosized Si, SiOx, and graphite, as evidenced by the significantly improved ICEs. Superior air stability (10% relative humidity) is exhibited by ANSBM due to surface functionalization by the stable interfacial layer encapsulated by electron-conductive carbon. The outcome of this work provides a promising way to synthesize dual-functionalized nano silicon with good electrochemical performance in terms of improved capacity and increased initial Coulombic efficiency when it is composited with other typical anode materials.
RESUMEN
The Ni-rich cathode holds great promise for high energy density lithium-ion batteries because of its high capacity and operating voltage. However, crucial problems such as cation disorder, structural degradation, side reactions, and microcracks become serious with increasing nickel content. Herein, a novel and facile sol/antisolvent coating modification of Ni-rich layered oxide LiNi0.85Co0.1Mn0.05O2 (NCM) is developed where we use ethanol to disperse the nanosized LiBO2 to form the sol and adopt tetrahydrofuran (THF) as antisolvent to prepare the cluster of nanoparticles to be coated on the surface of NCM. The coating thickness can be tuned through the THF addition amount. The LiBO2 nanorod deposition is formed as well over the crack of the NCM cathode, likely acting as a patch to repair the original defect of the intrinsic crack. The uniform LiBO2 nanospherical particle coating together with LiBO2 nanorod wrapping provides a double protection against electrolytes. Compared with the raw material, LiBO2-coated LiNi0.85Co0.1Mn0.05O2 (LiBO2-coated NCM) exhibits a high initial Coulombic efficiency of 90.3% at 0.2 C between 2.8 and 4.3 V vs Li+/Li, a superior rate capability, enhanced fast charge property at 3 C, and restricted microcrack formation. This simple in-site modification and repairing technology guarantees a good mechanical integrity of the polycrystalline Ni-rich cathode.
RESUMEN
Increasing working voltage is a promising way to increase the energy density of lithium-ion batteries. Cycling and rate performance deteriorated due to excessive electrolyte decomposition and uncontrolled formation of a cathode-electrolyte interface (CEI) layer at a high voltage. A new concept is proposed to construct a high-voltage-stable electrode-electrolyte interface. An elastomeric poly(dimethyl siloxane) (PDMS) binder is incorporated into the electrode to modify the LiNi0.5Co0.2Mn0.3O2 (NCM 523) particle surface via an in situ cross-linking reaction between hydroxy-terminated PDMS and methyl trimethoxy silane promoted by moisture at ambient conditions (MPDMS). Improved electrochemical performance is achieved with the MPDMS binder in terms of reversible capacity (201 vs 185 mAh·g-1 at 0.2C), capacity retention (80 vs 68%, after 300 cycles at 1C), and rate performance (55.6% increase at 5C), as demonstrated by the NCM 523||Li half-cell. The NCM 523||graphite full-cell also shows improved performance at 4.6 V (147 vs 128 mAh·g-1, 82 vs 76%, after 200 cycles at 1C). The mechanism studies indicate that MPDMS exerts multiple effects, including cathode surface passivation, solvation structure tuning, electrolyte uptake enhancement, and mechanical stress relief. This work provides an inspiring route to realize high-voltage application of lithium-ion battery technology.
RESUMEN
As a promising alternative as lithium-ion anode, niobium dioxide appeals to researchers due to high theoretical capacity and good electron conductivity. However, rarely work about NbO2 based high performance anode is reported. Here, NbO2 nanoparticles emcoated in continuous carbon matrix is constructed through CO2 /H2 coupling treatment. CO2 activation introduces unique carbon emcoating structure, which builds interconnected electron conductive network with low carbon content. Furthermore, crystallographic phase of NbO2 is enhanced during H2 treatment, which increases the lithium storage ability. Electrochemical performance of NbO2 anodes is significantly improved based on the carbon emcoating structure. A high reversible capacity of 391â mAh g-1 is retained after 350â cycles at 0.2â C. Additionally, at a current density of 1â A g-1 , the reversible capacity reaches 139â mAh g-1 . Compared with conventional NbO2 /C nanohybrids, the lithium diffusion coefficient of carbon-emcoated sample shows improvement of three orders of magnitude. Moreover, the inâ situ XRD investigation shows a reversible lithium insertion behaviour with a limited volume change.
RESUMEN
Increasing working voltage of cathode has been identified as one of the most promising strategies to increase energy density of the lithium-ion batteries. It is of crucial importance to suppress side reactions and control the formation of a cathode electrolyte interface (CEI) on the cathode surface in a high voltage range. In this work, sulfur is utilized to increase the working voltage of LiNi0.5Co0.2Mn0.3O2(NCM 523) to 4.5 V as demonstrated by both the NCM523/Li half-cell and NCM 523/graphite full cell. When a tiny amount of sulfur (0.1 mg mL-1) is added to the blank electrolyte of ethylene carbonate (EC) and dimethyl carbonate (DMC) (3:7 by volume), the cycling stability and rate performance are greatly improved in the NCM523/Li half-cell. The capacity retention over 200 cycles at 170 mA g-1 (1.0 C) is increased from 61.2 to 82.0%. The capacity at a high current density of 850 mA g-1 (5.0 C) is increased from 92 mAh g-1 to 120 mAh g-1. Because the addition of sulfur also enhances the performance of the Li/graphite half-cell, improved performance is demonstrated by the NCM 523/graphite full cell as well. The mechanism is interpreted based on various characterizations. It is revealed that the preferential oxidation of sulfur at the cathode surface suppress decomposition of electrolyte solvent. Because only a tiny amount of sulfur is added into the electrolyte solution, excessive decomposition of sulfur is avoided, leading to improved electrochemical performance.
RESUMEN
Increasing the working voltage of lithium-ion batteries (LIBs) is an efficient way to increase energy density. However, high voltage triggers excessive electrolyte decomposition at the electrode-electrolyte interfaces, where the electrochemical performance such as cyclic stability and rate capability is seriously deteriorated. A new synergistic positive and passive approach is proposed in this work to construct a stable electrode-electrolyte interface at high voltage. As a positive approach, inorganic lithium sulfide salt (Li2S) is used as an electrolyte additive to build a stable cathode electrolyte interface (CEI) at the LiNi0.5Co0.2Mn0.3O2 (NCM523) cathode surface. In a passive way, acetonitrile (AN) is applied as a solvent additive to suppress oxidative decomposition of a carbonate electrolyte via preferential solvation with a lithium ion. Because of the synergistic interaction between the positive and passive approaches, the cyclic stabilities of NCM523/Li cells improved with a tiny amount of Li2S (0.01 mg mL-1) and AN (0.5 vol %). The capacity retention increased to 80.74% after 200 cycles compared to the cells with the blank electrolyte (67.98%) and AN-containing electrolyte (75.8%). What is more, the capacity retention of the NCM523/graphite full cell is increased from 65 to 81% with the addition of the same amount of Li2S and AN after 180 cycles. The mechanism is revealed on the basis of the theoretical calculations and various characterizations. The products derived from the preferential adsorption and oxidation of Li2S on the surface of NCM523 effectively increase the content of inorganic ingredients. However, the presence of AN prevents oxidation of the solvent. This study provides new principle guiding studies on a high-voltage lithium-ion battery with excellent electrochemical performance.