RESUMEN
Matching the thickness of the graphitic carbon nitride (CN) nanolayer with the charge diffusion length is expected to compensate for the poor intrinsic conductivity and charge recombination in CN for photoelectrochemical cells (PEC). Herein, the compact CN nanolayer with tunable thickness is in situ coated on carbon fibers. The compact packing along with good contact with the substrate improves the electron transport and alleviates the charge recombination. The PEC investigation shows CN nanolayer of 93 nm-thick yields an optimum photocurrent of 116 µA cm-2 at 1.23 V versus RHE, comparable to most micrometer-thick CN layers, with a low onset potential of 0.2 V in 1 m KOH under 1 sun illumination. This optimum performance suggests the electron diffusion length matches with the thickness of the CN nanolayer. Further deposition of NiFe-layered double hydroxide enhanced the surface water oxidation kinetics, delivering an improved photocurrent of 210 µA cm-2 with IPCE of 12.8% at 400 nm. The CN nanolayer also shows extended potential in PEC organic synthesis. This work experimentally reveals the PEC behavior of the nanometer-thick CN layer, providing new insights into CN in the application of energy and environment-related fields.
RESUMEN
There is growing focus on metal-free molecules and polymers owing to their potential applications in various energy and catalysis-related applications. Melem (2,5,8-triamino-s-heptazine, C6H6N10) has emerged as a metal-free material for solar-to-fuel conversion. However, its reactivity with metal ions or organic molecules has never been reported although it possesses multiple supramolecular interaction sites. In this work, we report on the synthesis of a novel metal-organic coordination framework (melem-Ag) by simply introducing Ag+ into the aqueous suspension of aggregated melem particles. Notably, as the reaction progresses, the melem disappears, and the morphology of the newly formed complex spontaneously evolves from nanofibers to single-crystalline blocks, which possess the same chemical structure, indicating that the morphology evolution is driven by Ostwald ripening. The structure of melem-Ag displays infinite nanocages of triangular pyramids consisting of melem molecules and Ag+, linked via Ag-N coordinate bonding and Ag-Ag argentophilic interactions. It is noteworthy that Ag+ is the only transition-metal cation that reacts with melem suspensions, even in the presence of other transition-metal cations (Co2+, Ni2+, Cu2+, and Zn2+). The coordination of Ag+ to melem results in metal-to-ligand charge transfer (MLCT), resulting in a quenched photoluminescence and enhanced light absorption. Exposing the melem-Ag crystals to UV light for varying time intervals results in the formation of colorful powders, which may be used for Ag-decorated photocatalysts.
RESUMEN
The growth of flexible semiconductor thin films and membranes is highly desirable for the fabrication of next-generation wearable devices. In this work, we have developed a one-step, surface tension-driven method for facile and scalable growth of silver sulfide (Ag2S) membranes with a nanomesh structure. The nanomesh membrane can in principle reach infinite size but only limited by the reactor size, while the thickness is self-limited to ca. 50 nm. In particular, the membrane can be continuously regenerated at the water surface after being transferred for mechanical and electronic tests. The free-standing membrane demonstrates exceptional flexibility and strength, resulting from the nanomesh structure and the intrinsic plasticity of the Ag2S ligaments, as revealed by robust manipulation, nanoindentation tests and a pseudo-in situ tensile test under scanning electron microscope. Bendable electronic resistance-switching devices are fabricated based on the nanomesh membrane.
Asunto(s)
Semiconductores , Compuestos de Plata , ElectrónicaRESUMEN
Achieving reversible molecular crystal transformation between coordinate aggregates and hydrogen bonded assemblies has been a challenging task because coordinate bonds are generally much stronger than hydrogen bonds. Recently, we have reported the incorporation of silver ions into the cyanuric acid-melamine (CAM) network, resulting in the formation of a 1D coordination polymer (crystal 1) through forming the κ1N-Ag-κ2N coordination bonds. In this work, we find crystal 1 will undergo reversible transformation to hydrogen bonded coordinate units (crystal 2) through the breaking of coordinate chains and then the addition of CAM hydrogen bonding motifs into the framework. Crystal 2 presents a pseudohexagonal arrangement comprised of the κ1N-Ag-κ2N units connected by two sets of the triple hydrogen bonds, which extends two-dimensionally and stacks into a layer-structured crystal. Light was shed on the tautomerization of CA and M ligands associated with the crystal transformations using single crystal X-ray diffraction and infrared spectroscopy by analyzing the bond lengths and vibrations. We also highlight that photoluminescence can be a useful tool to probe the tautomer conversions of conjugated molecules. Furthermore, crystal 1 demonstrates high flexibility and can be bent over 180° and recover to its original shape after stress release. Crystal 2, on the contrary, is brittle and shows distinct mechanical anisotropy along different crystal orientations, as unveiled by nanoindentation measurements. The elastic modulus is well correlated with the chemical bonding strength along each orientation, and it is noteworthy that the contribution of the triple hydrogen bonds is comparable to that of the coordination bonds.
RESUMEN
In this work, we report on the synthesis of a free-standing, macroscopic robust supramolecular membrane by introducing silver-nitrogen coordinate bonding into preorganized, supramolecular hydrogen-bonded cyanuric acid-melamine (CAM) crystals. With the assistance of ammonia, silver ions competitively replace two of the three hydrogen atoms from cyanuric acid resulting in the transformation from short CAM nanorods to long CAM-Ag nanofibers (length over 1000 µm), accompanied by tautomerization of cyanuric acid. The single crystal structure of the CAM-Ag nanofibers is solved in the space group P1, with the asymmetric unit containing eight silver atoms, four melamine and four cyanuric acid molecules, which generate 1D coordination polymer chains consisting of alternating melamine and dianionic cyanurate ligands linked via silver-nitrogen bonds. The presence of interchain hydrogen bonds results in the expansion of the supramolecular network into undulating 2D sheets, which then stack into a 3D network via a series of intersheet hydrogen bonds and π-π interactions. Significantly, the CAM-Ag nanofibers spontaneously assemble into a free-standing membrane, with lateral size up to square centimeters and thickness of 30 µm. The membrane shows high flexibility and mechanical strength, owing to the improved flexibility of the CAM-Ag nanofibers with bonded chain structure, and can be reversibly and repeatedly bent over 90 degrees. Remarkably, the CAM-Ag membrane demonstrates distinct optical transmittance being shortwave IR transmissive but impenetrable to UV and visible light.
RESUMEN
The construction of multi-heteroatom-doped metal-free carbon with a reversibly oxygen-involving electrocatalytic performance is highly desirable for rechargeable metal-air batteries. However, the conventional approach for doping heteroatoms into the carbon matrix remains a huge challenge owing to multistep postdoping procedures. Here, a self-templated carbonization strategy to prepare a nitrogen, phosphorus, and fluorine tri-doped carbon nanosphere (NPF-CNS) is developed, during which a heteroatom-enriched covalent triazine polymer serves as a "self-doping" precursor with C, N, P, and F elements simultaneously, avoiding the tedious and inefficient postdoping procedures. Introducing F enhances the electronic structure and surface wettability of the as-obtained catalyst, beneficial to improve the electrocatalytic performance. The optimized NPF-CNS catalyst exhibits a superb electrocatalytic oxygen reduction reaction (ORR) activity, long-term durability in pH-universal conditions as well as outstanding oxygen evolution reaction (OER) performance in an alkaline electrolyte. These superior ORR/OER bifunctional electrocatalytic activities are attributed to the predesigned heteroatom catalytic active sites and high specific surface areas of NPF-CNS. As a demonstration, a zinc-air battery using the NPF-CNS cathode displays a high peak power density of 144 mW cm-2 and great stability during 385 discharging/charging cycles, surpassing that of the commercial Pt/C catalyst.
RESUMEN
Major challenges in developing 2D transition-metal disulfides (TMDs) as anode materials for lithium/sodium ion batteries (LIBs/SIBs) lie in rational design and targeted synthesis of TMD-based nanocomposite structures with precisely controlled ion and electron transport. Herein, a general and scalable solvent-exchange strategy is presented for uniform dispersion of few-layer MoS2 (f-MoS2 ) from high-boiling-point solvents (N-methyl-2-pyrrolidone (NMP), N,N-dimethyl formaldehyde (DMF), etc.) into low-boiling-point solvents (water, ethanol, etc.). The solvent-exchange strategy dramatically simplifies high-yield production of dispersible MoS2 nanosheets as well as facilitates subsequent decoration of MoS2 for various applications. As a demonstration, MoS2 -decorated nitrogen-rich carbon spheres (MoS2 -NCS) are prepared via in situ growth of polypyrrole and subsequent pyrolysis. Benefiting from its ultrathin feature, largely exposed active surface, highly conductive framework and excellent structural integrity, the 2D core-shell architecture of MoS2 -NCS exhibits an outstanding reversible capacity and excellent cycling performance, achieving high initial discharge capacity of 1087.5 and 508.6 mA h g-1 at 0.1 A g-1 , capacity retentions of 95.6% and 94.2% after 500 and 250 charge/discharge cycles at 1 A g-1 , for lithium/sodium ion storages, respectively.
RESUMEN
g-C3 N4 has been found to be highly functional in many fields, such as photocatalysis, electrocatalysis, and chemical analysis. Pickering emulsion polymerization is a fascinating strategy to fabricate a range of nanomaterials, in which the emulsion is stabilized by solid particles, rather than molecular surfactants. Herein, we demonstrate that g-C3 N4 can act as a remarkable stabilizer for Pickering emulsion polymerization. Contrary to normal Pickering systems, monodisperse polystyrene microspheres with tunable size, surface charge, and morphology were achieved using this approach. Importantly, the g-C3 N4 hybridized latex is highly processable and has exhibited multiple functions: manufacture of photonic crystals via self-organization, stabilizing Pickering emulsion owing to proper wettability, and acting as bioimaging agents with enriched fluorescent colors. Considering the easy synthesis and low cost of g-C3 N4 , our approach has a high potential for scale-up synthesis and practical translation.
RESUMEN
A new and simple synthetic route is introduced to covalently functionalize the carbon nitride (CN) framework by the implementation of halogenated phenyl groups (Cl, Br and I), which serve as a chemically reactive center, within the CN framework. The covalent modification is demonstrated here by substituting phenyl and tert-butyl propionate onto the modified-CN framework through Suzuki and reductive-Heck cross-coupling reactions, respectively. The effective functionalization leads to a facile exfoliation of the CN framework into thinner layers and greatly enhances the dispersibility in many solvents as well as the photocatalytic activity compared to the unmodified CN. The general covalent modification opens the possibility for tailor-made design of dispersible CN materials, including their photophysical and chemical properties, toward their exploitation in many fields, such as photocatalysis, bio-imaging, sensing, and heterogeneous catalysis.
RESUMEN
Pickering emulsions are emulsions stabilized by solid particles located at surfaces/interfaces of liquid droplets that have promising applications for drug delivery and in nanomaterials synthesis. Direct observation of Pickering emulsions can be challenging. Normally, cryoelectron microscopy needs to be used to better understand these types of emulsion systems, but cryofreezing these emulsions may cause them to lose their original morphologies. In this work, we demonstrate that graphitic carbon nitride (g-C3N4) can stabilize oil-in-water (o/w) emulsions, with hexane illustrated as a typical oil phase. The g-C3N4-stabilized emulsions can act as an excellent platform for in situ study of emulsifying behavior from the mechanical point of view. Owing to its large lateral size and blue, stable fluorescence, the locations and motions of the g-C3N4 stabilizer can be finely in situ monitored by light microscopy, fluorescence microscopy, and confocal microscopy. Accordingly, we illustrate two stabilizing configurations of the g-C3N4 particles with respect to the emulsion droplets under static conditions. Further, we demonstrate the capability to manipulate emulsion droplets and investigate their response to external forces. We perform real-time observations of the g-C3N4 particles and the emulsion droplets that move in the continuous phase and study their adsorption kinetics toward each other. Finally, the π-π interaction between the stabilizer and aromatic liquid phase (e.g., toluene) is considered and studied as an influencing factor on emulsifying behavior.
RESUMEN
Direct hydrogenation of C=C double bonds is a basic transformation in organic chemistry which is vanishing from simple practice because of the need for pressurized hydrogen. Ammonia borane (AB) has emerged as a hydrogen source through its safety and high hydrogen content. However, in conventional systems the hydrogen liberated from the high-cost AB cannot be fully utilized. Herein, we develop a novel Pd/g-C3 N4 stabilized Pickering emulsion microreactor, in which alkenes are hydrogenated in the oil phase with hydrogen originating from AB in the water phase, catalysed by the Pd nanoparticles at the interfaces. This approach is advantageous for more economical hydrogen utilization over conventional systems. The emulsion microreactor can be applied to a range of alkene substrates, with the conversion rates achieving >95 % by a simple modification.
RESUMEN
Graphitic carbon nitride (g-C3N4), a polymeric semiconductor that finds potential applications in multiple areas, is shown to feature amphiphilic behavior. Since the feasibility of g-C3N4 aqueous colloids is well-established, g-C3N4 can be viewed as an effective and well-accessible colloidal amphiphile. Its activity at different interfaces (liquid-liquid, liquid-solid, and liquid-air) is illustrated: g-C3N4 is able to stabilize Pickering emulsions formed by water and organic solvents, and also, gas-filled g-C3N4 frameworks based on those emulsions are obtained by natural drying. Hydrophobic solid substances like graphite and carbon nanotubes are smoothly dispersed in water assisted by g-C3N4. Besides, networklike g-C3N4 membranes floating on a water surface are created and can be readily transferred to substrates. These findings provide many opportunities for the processing of g-C3N4-containing functional materials and devices.
RESUMEN
Shape and nanostructure control has great potential to enable graphitic carbon nitride (C3 N4 ) structures with new properties and functionalities. In this work, a new type of hierarchically structured nanoporous C3 N4 is introduced. The C3 N4 exhibits unique, edelweiss-like morphology, with components ranging from millimeter-sized bunches to subnanometer-thick layers. A one-step vapor-solid deposition approach using supramolecular aggregates as the precursor is carried out to accomplish the growth. Supramolecular pre-association plays a crucial role in achieving this nanostructure by directing the vaporization and deposition processes. Furthermore, very small C3 N4 quantum dots can be readily acquired by bath sonication of the thin layers in water. The supramolecular preorganization growth strategy developed herein may provide a general methodology in the design of advanced photoelectric materials with broad applications in energy conversion and storage.
RESUMEN
A novel type of quantum dot (Ph-CN) is manufactured from graphitic carbon nitride by "lining" the carbon nitride structure with phenyl groups through supramolecular preorganization. This approach requires no chemical etching or hydrothermal treatments like other competing nanoparticle syntheses and is easy and safe to use. The Ph-CN nanoparticles exhibit bright, tunable fluorescence, with a high quantum yield of 48.4 % in aqueous colloidal suspensions. Interestingly, the observed Stokes shift of approximately 200â nm is higher than the maximum values reported for carbon nitride based fluorophores. The high quantum yield and the large Stokes shift are related to the structural surface organization of the phenyl groups, which affects the π-electron delocalization in the conjugated carbon nitride networks and induces colloidal stability. The remarkable performance of the Ph-CN nanoparticles in imaging is demonstrated by a simple incubation study with HeLa cells.
RESUMEN
Herein we report a general liquid-mediated pathway for the growth of continuous polymeric carbon nitride (C3N4) thin films. The deposition method consists of the use of supramolecular complexes that transform to the liquid state before direct thermal condensation into C3N4 solid films. The resulting films exhibit continuous porous C3N4 networks on various substrates. Moreover, the optical absorption can be easily tuned to cover the solar spectrum by the insertion of an additional molecule into the starting complex. The strength of the deposition method is demonstrated by the use of the C3N4 layer as the electron acceptor in a polymer solar cell that exhibits a remarkable open-circuit voltage exceeding 1 V. The easy, safe, and direct synthesis of carbon nitride in a continuous layered architecture on different functional substrates opens new possibilities for the fabrication of many energy-related devices.
RESUMEN
The rapid charge recombination, low selectivity for two-electron oxygen reduction reaction (ORR), and limited O2 diffusion rate hinder the practical applications of photocatalytic H2 O2 generation. Herein, a triphase photocatalytic system in which the H2 O2 generation occurs at the air-liquid-solid joint interfaces is developed, using polymeric carbon nitride (PCN). The introduction of pyrrole units and cyano group into PCN can promote the activation of oxygen molecules and facilitate the spatial separation of HOMO and LUMO orbits, hence improving the charge carrier separation efficiency and enhancing the formation of H2 O2 . Importantly, the gas-liquid-solid triphase interface system allows for the rapid transport of oxygen from the air to the reaction interface, overcoming the low solubility and slow diffusion of oxygen in the water in conventional liquid reaction systems. The triphase system shows a benchmark H2 O2 generation rate over PCN-based materials in pure water (2063.21 µmol g-1 h-1 ), which is an approximate tenfold enhancement as compared to powder photocatalyst (215.44 µmol g-1 h-1 ). Simulation and electrochemical tests reveal that the rapid oxygen diffusion rate of triphase interface can promote charge separation and provide more O2 to generate H2 O2 . This work provides a promising strategy for constructing an efficient and sustainable H2 O2 production system.
RESUMEN
Biomass with abundant reproducible carbon resource holds great promise as an intriguing substitute for fossil fuels in the manufacture of high-value-added chemicals and fuels. Photocatalytic biomass valorization using inexhaustible solar energy enables to accurately break desired chemical bonds or selectively functionalize particular groups, thus emerging as an extremely creative and low carbon cost strategy for relieving the dilemma of the global energy. Quantum dots (QDs) are an outstandingly dynamic class of semiconductor photocatalysts because of their unique properties, which have achieved significant successes in various photocatalytic applications including biomass valorization. In this review, the current development rational design for QDs photocatalytic biomass valorization effectively is highlighted, focusing on the principles of tuning their particle size, structure, and surface properties, with special emphasis on the effect of the ligands for selectively broken chemical bonds (CâO, CâC) of biomass. Finally, the present issues and possibilities within that exciting field are described.
RESUMEN
Claisen-Schmidt (CS) condensation between acetone and benzaldehyde with NaOH as the catalyst is a well-recognized pathway for the synthesis of benzalacetone (BA). However, this process is compromised by a side reaction, i.e., a second CS reaction between benzaldehyde and the BA product. In this work, we designed a stirring-induced emulsion synthesis technique for the cyclic and scaling-up production of BA with 99 ± 1% selectivity, without the use of surfactants. In this approach, the water-soluble acetone and NaOH were separated from the oil-soluble benzaldehyde by the organic-aqueous phase interface, such that the CS condensation could only be executed at the liquid interface. The just-formed BA molecules diffuse to the interior of the oil solvent, where any subsequent CS post-reaction is rendered negligible, owing to the absence of NaOH. The oil phase containing the BA molecules can be easily separated from the aqueous solution by stopping stirring and undisturbed standing, allowing for a large-scale production protocol. As a proof of concept, over 1 kg of BA was produced in the laboratory with high yield and purity.
RESUMEN
The construction of hollow mesoporous carbon nanospheres (HMCS) avoiding the use of traditional soft/hard templates is highly desired for nanoscience yet challenging. Herein, we report a simple and straightforward template-free strategy for preparing nitrogen, sulfur dual-doped HMCSs (N/S-HMCSs) as oxygen reduction reaction (ORR) electrocatalysts. The unique hollow spherical and mesoporous structure was in-situ formed via a thermally initiated hollowing pathway from an elaborately engineered covalent triazine framework. Regulation of pyrolysis temperatures contributed to precisely tailoring of the shell thickness of HMCSs. The resulting N/S-HMCS900 (pyrolyzed at 900 °C) possessed high N and S contents, large specific surface areas, rich and uniform mesopores distribution. Consequently, as a metal-free ORR electrocatalyst, N/S-HMCS900 exhibits a high half-wave potential, excellent methanol tolerance and great long-term durability. Additionally, density functional theory calculations demonstrate that N, S-dual dopant can create extra active sites with higher catalytic activity than the isolated N-dopant. This strategy provides new insights into the construction of hollow and mesoporous multi-heteroatom-doped carbon materials with tunable nanoarchitecture for various electrochemical applications.
RESUMEN
The construction of ionic conductive hydrogels with high transparency, excellent mechanical robustness, high toughness, and rapid self-recovery is highly desired yet challenging. Herein, a hydrogen-bonding network densification strategy is presented for preparing a highly stretchable and transparent poly(ionic liquid) hydrogel (PAM-r-MVIC) from the perspective of random copolymerization of 1-methyl-3-(4-vinylbenzyl) imidazolium chloride and acrylamide in water. Ascribing to the formation of a dense hydrogen-bonding network, the resultant PAM-r-MVIC exhibited an intrinsically high stretchability (>1000%) and compressibility (90%), fast self-recovery with high toughness (2950 kJ m-3), and excellent fatigue resistance with no deviation for 100 cycles. Dissipative particle dynamics simulations revealed that the orientation of hydrogen bonds along the stretching direction boosted mechanical strength and toughness, which were further proved by the restriction of molecular chain movements ascribing to the formation of a dense hydrogen-bonding network from mean square displacement calculations. Combining with high ionic conductivity over a wide temperature range and autonomous adhesion on various surfaces with tailored adhesive strength, the PAM-r-MVIC can readily work as a highly stretchable and healable ionic conductor for a capacitive/resistive bimodal sensor with self-adhesion, high sensitivity, excellent linearity, and great durability. This study might provide a new path of designing and fabricating ionic conductive hydrogels with high mechanical elasticity, high toughness, and excellent fatigue resilience for skin-inspired ionic sensors in detecting complex human motions.