Approaching the intrinsic exciton physics limit in two-dimensional semiconductor diodes.

Two-dimensional (2D) semiconductors have attracted intense interest for their unique photophysical properties, including large exciton binding energies and strong gate tunability, which arise from their reduced dimensionality1-5. Despite considerable efforts, a disconnect persists between the fundamental photophysics in pristine 2D semiconductors and the practical device performances, which are often plagued by many extrinsic factors, including chemical disorder at the semiconductor-contact interface. Here, by using van der Waals contacts with minimal interfacial disorder, we suppress contact-induced Shockley-Read-Hall recombination and realize nearly intrinsic photophysics-dictated device performance in 2D semiconductor diodes. Using an electrostatic field in a split-gate geometry to independently modulate electron and hole doping in tungsten diselenide diodes, we discover an unusual peak in the short-circuit photocurrent at low charge densities. Time-resolved photoluminescence reveals a substantial decrease of the exciton lifetime from around 800 picoseconds in the charge-neutral regime to around 50 picoseconds at high doping densities owing to increased exciton-charge Auger recombination. Taken together, we show that an exciton-diffusion-limited model well explains the charge-density-dependent short-circuit photocurrent, a result further confirmed by scanning photocurrent microscopy. We thus demonstrate the fundamental role of exciton diffusion and two-body exciton-charge Auger recombination in 2D devices and highlight that the intrinsic photophysics of 2D semiconductors can be used to create more efficient optoelectronic devices.

High-order superlattices by rolling up van der Waals heterostructures.

Two-dimensional (2D) materials1,2 and the associated van der Waals (vdW) heterostructures3-7 have provided great flexibility for integrating distinct atomic layers beyond the traditional limits of lattice-matching requirements, through layer-by-layer mechanical restacking or sequential synthesis. However, the 2D vdW heterostructures explored so far have been usually limited to relatively simple heterostructures with a small number of blocks8-18. The preparation of high-order vdW superlattices with larger number of alternating units is exponentially more difficult, owing to the limited yield and material damage associated with each sequential restacking or synthesis step8-29. Here we report a straightforward approach to realizing high-order vdW superlattices by rolling up vdW heterostructures. We show that a capillary-force-driven rolling-up process can be used to delaminate synthetic SnS2/WSe2 vdW heterostructures from the growth substrate and produce SnS2/WSe2 roll-ups with alternating monolayers of WSe2 and SnS2, thus forming high-order SnS2/WSe2 vdW superlattices. The formation of these superlattices modulates the electronic band structure and the dimensionality, resulting in a transition of the transport characteristics from semiconducting to metallic, from 2D to one-dimensional (1D), with an angle-dependent linear magnetoresistance. This strategy can be extended to create diverse 2D/2D vdW superlattices, more complex 2D/2D/2D vdW superlattices, and beyond-2D materials, including three-dimensional (3D) thin-film materials and 1D nanowires, to generate mixed-dimensional vdW superlattices, such as 3D/2D, 3D/2D/2D, 1D/2D and 1D/3D/2D vdW superlattices. This study demonstrates a general approach to producing high-order vdW superlattices with widely variable material compositions, dimensions, chirality and topology, and defines a rich material platform for both fundamental studies and technological applications.

The picture of undergraduate dental basic research education: a scoping review.

BACKGROUND: Undergraduate dental basic research education (UDBRE) is broadly regarded as an important approach for cultivating scientific research talent. This scoping review aims to summarize the current status of UDBRE in terms of educational goals, teaching program and content, assessment system, training outcomes, barriers, and reflections. METHODS: The authors performed a systematic literature search in PubMed, Web of Science, and Education Resources Information Center (ERIC) to identify peer-reviewed articles written in English from their inception to January 29, 2021. Articles were reviewed and screened according to the inclusion and exclusion criteria. Related data from the included publications were then collected and summarized. RESULTS: The authors searched 646 publications and selected 16 articles to include in the study. The education goals included cultivating five major dental basic research capabilities (n=10, 62.5%) and developing interest in basic research (n=2, 12.5%). As for the teaching program, the mentor-guided student research project was the most popular (n=11, 68.8%), followed by didactic courses (n=5, 31.3%), experimental skills training (n=1, 6.3%), and the combination of the above forms (n=3, 18.8%). However, the assessment system and training outcome diverged. Existing evidence showed that UDBRE reached satisfying education outcomes. Barriers included excessive curriculum burden (n=2, 12.5%), tutor shortage (n=3, 18.8%), lack of financial support (n=5, 31.3%), and inadequate research skills and knowledge (n=5, 31.3%). CONCLUSIONS: Although efforts were made, the variation between studies revealed the immature status of UDBRE. A practical UDBRE education system paradigm was put forward. Meanwhile, more research is required to optimize a robust UDBRE system with clear education goals, well-designed teaching forms, and convincing assessment systems.

Giant Spin Lifetime Anisotropy and Spin-Valley Locking in Silicene and Germanene from First-Principles Density-Matrix Dynamics.

Through first-principles real-time density-matrix (FPDM) dynamics simulations, we investigated spin relaxation due to electron-phonon and electron-impurity scatterings with spin-orbit coupling (SOC) in two-dimensional Dirac materials silicene and germanene at finite temperatures. We discussed the applicability of conventional descriptions of spin relaxation mechanisms by Elliott-Yafet (EY) and D'yakonov-Perel' (DP) compared to the FPDM method, which is determined by a complex interplay of intrinsic SOC, external fields, and scattering strength. For example, the electric field dependence of the spin lifetime by FPDM is close to the DP mechanism for silicene at room temperature but similar to the EY mechanism for germanene. Because of its stronger SOC strength and buckled structure in contrast to graphene, germanene has a giant spin lifetime anisotropy and spin-valley locking effect under nonzero Ez and low temperatures. More importantly, germanene has a long spin lifetime (∼100 ns at 50 K) and an ultrahigh carrier mobility, making it advantageous for spin-valleytronic applications.

Rationally designed NiMn LDH@NiCo2O4core-shell structures for high energy density supercapacitor and enzyme-free glucose sensor.

Exploring high-efficiency and low-cost bifunctional electrodes for supercapacitors and sensors is significant but challenging. Most of the existing electrodes are mostly single-functional materials with simple structure. Herein, NiCo2O4nanowires as the core and NiMn layered double hydroxide (LDH) as the shell is directly grownin situon carbon cloth (CC) to form a heterostructure (NiMn LDH@NiCo2O4/CC). The performance in supercapacitors and enzyme-free glucose sensing has been systematically studied. Compared with a single NiCo2O4nanowire or NiMn LDH nanosheet, the heterogeneous interface produced by the unique core-shell structure has stronger electronic interaction and abundant active surface area, which shows excellent electrochemical performance. Electrochemical tests demonstrate that the NiMn LDH@NiCo2O4/CC core-shell electrode possesses an area specific capacitance of 2.40 F cm-2and a rate capability of 76.22% at 20 mA cm-2. Simultaneously, asymmetric supercapacitor is assembled with it as the positive electrode and NiFe LDH@NiCo2O4/CC as the negative electrode. The supercapacitor possesses an energy density of 47.74 Wh kg-1when the power density is 175 W kg-1, revealing excellent performance and maintains cycle stability of 93.48% after 6000 cycles at 10 mA cm-2. Additionally, the electrode applied as enzyme-free glucose sensor electrode also displays outstanding sensitivity of 2139µA mM-1cm-2, wide detection range (2µM-3mM and 4-8 mM) and low detection limit of 210 nM, representing good anti-interference performance. This work reveals the multi-metal synergy and rationally designed core-shell structure is critical to the electrochemical performance of bifunctional electrodes.

Wet compounding with pyrolytic carbon black from waste tyre for manufacture of new tyre - A mini review.

Pyrolysis offers a more focused alternative to waste tyres treatment. Pyrolytic carbon black (CBp), the main product of waste tyre pyrolysis, and its modified species can be applied to tyre manufacturing realizing its high-value utilization. Modified pyrolytic carbon black/natural rubber composites prepared by a wet compounding (WC) and latex mixing process have become an innovative technology route for waste tyre remanufacturing. The main properties and applications of CBp reported in recent years are reviewed, and the main difficulties affecting its participation in tyre recycling are pointed out. The research progress of using WC technology to replace dry mixing manufacturing of new tyres is summarized. Through literature data and comparative studies, this paper points out that the characteristic of high ash content can be well utilized if CBp is applied to tyre manufacturing. This mini-review proposes a new method for high-value utilization of CBp. The composite mixing of CBp and carbon nano-materials under wet conditions is conducive to the realization of their good dispersion in the rubber matrix. This provides a new idea for customer resource integration and connection of industry development between the tyre production industry and waste tyre disposal management.

Computed Tomographic Imaging of 3 Patients With Coronavirus Disease 2019 Pneumonia With Negative Virus Real-time Reverse-Transcription Polymerase Chain Reaction Test.

We reported computed tomographic (CT) imaging findings of 3 patients with coronavirus disease 2019 (COVID-19) pneumonia with initially negative results before CT examination and finally confirmed positive for the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) by real-time reverse-transcription polymerase chain reaction assay.

LINC02418 promotes malignant behaviors in lung adenocarcinoma cells by sponging miR-4677-3p to upregulate KNL1 expression.

BACKGROUND: Lung adenocarcinoma (LAD) is a prevalent type of bronchogenic malignant tumor and one of the most critical factors related to human death. Long noncoding RNAs (lncRNAs) are involved in many complex biological processes and have been emerged as extremely important regulators of various cancers. LINC02418, a novel lncRNA, hasn't been mentioned in previous studies on cancer development. Therefore, it's important to define the potential function of LINC02418 in LAD. METHODS: Gene expression was examined by RT-qPCR or western blot. CCK-8, colony formation, TUNEL, and transwell assays were utilized to study the role of LINC02418 in LAD. The interaction of miR-4677-3p with LINC02418 (or KNL1) was verified through luciferase reporter, RIP and RNA pull-down assays. RESULTS: High expression of LINC02418 was observed in LAD specimens and cells. Downregulation of LINC02418 obstructed the proliferation and motility of LAD cells. Moreover, LINC02418 negatively modulated miR-4677-3p expression and miR-4677-3p overexpression could repress cell proliferation and migration. Moreover, kinetochore scaffold 1 (KNL1) expression was negatively modulated by miR-4677-3p but positively regulated by LINC02418. Furthermore, miR-4677-3p could bind with LINC02418 (or KNL1). Finally, KNL1 overexpression reversed the inhibitory function of LINC02418 deficiency in the malignant behaviors of LAD cells. CONCLUSIONS: LINC02418 contributes to the malignancy in LAD via miR-4677-3p/KNL1 signaling, providing a probable therapeutic direction for LAD.

Sesquiterpenoids from the roots of Inula helenium inhibit acute myelogenous leukemia progenitor cells.

One new eudesmane sesquiterpenoid, 11ß-hydroxy-13-chloro-eudesm-5-en-12, 8-olide (1), was isolated from the roots of Inula helenium together with nine eudesmanolides (2-10) and one germacranolide (11). Their structures were elucidated on the basis of detailed spectroscopic analyses. All isolates were evaluated for their antiproliferative activities against human leukemia stem-like cell line KG1a. Compound 10 exhibited the most potent effect with the IC50 value of 3.36 ±â€¯0.18 µM. A further investigation revealed that compound 10 could significantly induce apoptosis of KG1a cells. Additionally, compound 10 had an obvious effect on the levels of apoptosis-related proteins (Bcl-2, Bax, cytochrome c, caspase 9 and caspase 3), indicating that the antiproliferative effect of compound 10 on KG1a cells might be mediated through a mitochondria-dependent apoptotic pathway.

Thermal Conductivity and Electrical Resistivity of Solid Iron at Earth's Core Conditions from First Principles.

We compute the thermal conductivity and electrical resistivity of solid hcp Fe to pressures and temperatures of Earth's core. We find significant contributions from electron-electron scattering, usually neglected at high temperatures in transition metals. Our calculations show a quasilinear relation between the electrical resistivity and temperature for hcp Fe at extreme high pressures. We obtain thermal and electrical conductivities that are consistent with experiments considering reasonable error. The predicted thermal conductivity is reduced from previous estimates that neglect electron-electron scattering. Our estimated thermal conductivity for the outer core is 77±10 W m^{-1} K^{-1} and is consistent with a geodynamo driven by thermal convection.

Synthesis and biological evaluation of dithiocarbamate esters of parthenolide as potential anti-acute myelogenous leukaemia agents.

A series of dithiocarbamate esters of parthenolide (PTL) was designed, synthesised, and evaluated for their anti- acute myelogenous leukaemia (AML) activities. The most promising compound 7l showed greatly improved potency against AML progenitor cell line KG1a with IC50 value of 0.7 µM, and the efficacy was 8.7-folds comparing to that of PTL (IC50 = 6.1 µM). Compound 7l induced apoptosis of total primary human AML cells and leukaemia stem cell (LSCs) of primary AML cells while sparing normal cells. Furthermore, 7l suppressed the colony formation of primary human leukaemia cells. Moreover, compound 12, the salt form of 7l, prolonged the lifespan of mice in two patient-derived xenograft models and had no observable toxicity. The preliminary molecular mechanism study revealed that 7l-mediated apoptosis is associated with mitogen-activated protein kinase signal pathway. On the basis of these investigations, we propose that 12 might be a promising drug candidate for ultimate discovery of anti-LSCs drug.

Addition of T2-guided optical tomography improves noncontrast breast magnetic resonance imaging diagnosis.

BACKGROUND: While dynamic contrast-enhanced magnetic resonance imaging (DCE MRI) is recognized as the most sensitive examination for breast cancer detection, it has a substantial false positive rate and gadolinium (Gd) contrast agents are not universally well tolerated. As a result, alternatives to diagnosing breast cancer based on endogenous contrast are of growing interest. In this study, endogenous near-infrared spectral tomography (NIRST) guided by T2 MRI was evaluated to explore whether the combined imaging modality, which does not require contrast injection or involve ionizing radiation, can achieve acceptable diagnostic performance. METHODS: Twenty-four subjects-16 with pathologically confirmed malignancy and 8 with benign abnormalities-were simultaneously imaged with MRI and NIRST prior to definitive pathological diagnosis. MRIs were evaluated independently by three breast radiologists blinded to the pathological results. Optical image reconstructions were constrained by grayscale values in the T2 MRI. MRI and NIRST images were used, alone and in combination, to estimate the diagnostic performance of the data. Outcomes were compared to DCE results. RESULTS: Sensitivity, specificity, accuracy, and area under the curve (AUC) of noncontrast MRI when combined with T2-guided NIRST were 94%, 100%, 96%, and 0.95, respectively, whereas these values were 94%, 63%, 88%, and 0.81 for DCE MRI alone, and 88%, 88%, 88%, and 0.94 when DCE-guided NIRST was added. CONCLUSION: In this study, the overall accuracy of imaging diagnosis improved to 96% when T2-guided NIRST was added to noncontrast MRI alone, relative to 88% for DCE MRI, suggesting that similar or better diagnostic accuracy can be achieved without requiring a contrast agent.

Associations between gender, disease features and symptom burden in patients with myeloproliferative neoplasms: an analysis by the MPN QOL International Working Group.

The myeloproliferative neoplasms, including polycythemia vera, essential thrombocythemia and myelofibrosis, are distinguished by their debilitating symptom profiles, life-threatening complications and profound impact on quality of life. The role gender plays in the symptomatology of myeloproliferative neoplasms remains under-investigated. In this study we evaluated how gender relates to patients' characteristics, disease complications and overall symptom expression. A total of 2,006 patients (polycythemia vera=711, essential thrombocythemia=830, myelofibrosis=460, unknown=5) were prospectively evaluated, with patients completing the Myeloproliferative Neoplasm-Symptom Assessment Form and Brief Fatigue Inventory Patient Reported Outcome tools. Information on the individual patients' characteristics, disease complications and laboratory data was collected. Consistent with known literature, most female patients were more likely to have essential thrombocythemia (48.6% versus 33.0%; P<0.001) and most male patients were more likely to have polycythemia vera (41.8% versus 30.3%; P<0.001). The rate of thrombocytopenia was higher among males than females (13.9% versus 8.2%; P<0.001) and males also had greater red-blood cell transfusion requirements (7.3% versus 4.9%; P=0.02) with shorter mean disease duration (6.4 versus 7.2 years, P=0.03). Despite there being no statistical differences in risk scores, receipt of most therapies or prior complications (hemorrhage, thrombosis), females had more severe and more frequent symptoms for most individual symptoms, along with overall total symptom score (22.8 versus 20.3; P<0.001). Females had particularly high scores for abdominal-related symptoms (abdominal pain/discomfort) and microvascular symptoms (headache, fatigue, insomnia, concentration difficulties, dizziness; all P<0.01). Despite complaining of more severe symptom burden, females had similar quality of life scores to those of males. The results of this study suggest that gender contributes to the heterogeneity of myeloproliferative neoplasms by influencing phenotypic profiles and symptom expression.

Calreticulin mutations in Chinese with primary myelofibrosis.

We tested 357 Chinese with primary myelofibrosis for mutations in CALR, JAK2 and MPL. CALR mutations were detected in 76 subjects (21%). There were 24 (32%) type-1 (L367fs*46) and 49 (64%) type-2 (K385fs*47) mutations. Seventy-two of 168 subjects (43%) without a JAK2 or MPL mutation had a CALR mutation. Subjects with a type-2 CALR mutation had lower hemoglobin concentrations (P=0.001), lower WBC counts (P<0.001), a higher percentage of blood blasts (P=0.009), and higher conventional (P<0.001) and Chinese-adjusted Dynamic International Prognostic Scoring System (P<0.001) scores compared with subjects with JAK2 mutations. Subjects with a type-2 CALR mutation were also likely to have abnormal platelet levels (<100 × 10(9)/L, P=0.01 or >450 × 10(9)/L, P=0.042) and no splenomegaly (P=0.004). Type-2 CALR mutation or no detectable mutation was an independent high-risk factor for survival in multivariate analyses. These data suggest the ratio between type-1 and type-2 mutations is reversed in Chinese with primary myelofibrosis compared with populations of subjects with primary myelofibrosis of predominately European descent. The unfavorable prognostic impact of CALR mutations in Chinese with primary myelofibrosis is only seen in those with type-2 mutations. These data underscore the need to evaluate the prognostic impact of genetic mutations in different populations.

Cytogenetic studies and their prognostic contribution in 565 Chinese patients with primary myelofibrosis.

To study the feature and prognostic contribution of cytogenetic information in Chinese patients with primary myelofibrosis (PMF), we analyzed cytogenetic data from 565 patients with PMF. One hundred and sixty-two subjects (29%) had abnormal karyotypes, including trisomy 8 (45; 28%), deletion of 20q (25; 15%), deletion of 13q (13; 8%), deletion of 11q (12; 7%), and abnormal chromosome 1 (21; 13%); balanced translocations (14; 9%); a complex karyotype (CK; 30; 19%), and a monosomal karyotype (MK; 19; 12%). Using these data, we showed that the Dynamic International Prognostic Scoring System (DIPSS)-plus, which includes cytogenetic information, is a better survival predictor than the DIPSS. We next used our data to construct the following two cytogenetic-based cohorts: (1) favorable karyotype-subjects with a normal karyotype, a CK that is not a MK, +8 only or a balanced translocation only and (2) unfavorable karyotype-all others. The median survival times were not reached and were 52 month (95% CI, 32-72 months; P = 0.01) in patients with favorable and unfavorable karyotypes, respectively. These data provided the detailed cytogenetic information in Chinese patients with PMF and confirmed the impact of cytogenetic abnormalities on survival in Chinese patients.

Ab Initio Predictions of Spin Relaxation, Dephasing, and Diffusion in Solids.

Spin relaxation, dephasing, and diffusion are at the heart of spin-based information technology. Accurate theoretical approaches to simulate spin lifetimes (τs), determining how fast the spin polarization and phase information will be lost, are important to the understanding of the underlying mechanism of these spin processes, and invaluable in searching for promising candidates of spintronic materials. Recently, we develop a first-principles real-time density-matrix (FPDM) approach to simulate spin dynamics for general solid-state systems. Through the complete first-principles descriptions of light-matter interaction and scattering processes including electron-phonon, electron-impurity, and electron-electron scatterings with self-consistent spin-orbit coupling, as well as ab initio Landé g-factor, our method can predict τs at various conditions as a function of carrier density and temperature, under electric and magnetic fields. By employing this method, we successfully reproduce experimental results of disparate materials and identify the key factors affecting spin relaxation, dephasing, and diffusion in different materials. Specifically, we predict that germanene has long τs (∼100 ns at 50 K), a giant spin lifetime anisotropy, and spin-valley locking effect under electric fields, making it advantageous for spin-valleytronic applications. Based on our theoretical derivations and ab initio simulations, we propose a new useful electronic quantity, named spin-flip angle θ↑↓, for the understanding of spin relaxation through intervalley spin-flip scattering processes. Our method can be further applied to other emerging materials and extended to simulate exciton spin dynamics and steady-state photocurrents due to photogalvanic effect.

Unveiling the Diagnostic Value of Strain Parameters Across All 4 Cardiac Chambers in Patients With Acute Myocarditis With Varied Ejection Fraction: A Cardiovascular Magnetic Resonance Feature-Tracking Approach.

BACKGROUND: This study assesses the diagnostic utility of strain parameters from cardiovascular magnetic resonance feature tracking across all cardiac chambers in patients with acute myocarditis, stratified by ejection fraction. METHODS AND RESULTS: Our cohort included 65 patients with acute myocarditis and 25 healthy controls; all underwent cardiac magnetic resonance imaging. Patients were divided into 2 groups based on left ventricular ejection fraction (EF)with a 55% cutoff: acute myocarditis with preserved EF, EF ≥55%, n=48; and acute myocarditis with reduced EF, EF <55%, n=17. The control group matched for age and sex. Cardiovascular magnetic resonance feature tracking evaluated strain parameters across all cardiac chambers. Both acute myocarditis with preserved EF and acute myocarditis with reduced EF groups showed significant decreases in left atrial peak early negative strain rate compared with controls. The acute myocarditis with reduced EF group had significantly reduced left ventricular circumferential strain relative to acute myocarditis with preserved EF and controls. Receiver operating characteristic curve analysis confirmed the diagnostic accuracy in distinguishing patients with acute myocarditis with preserved EF from controls, with left atrial peak early negative strain rate achieving 92.9% specificity, left ventricular circumferential strain demonstrating an area under the curve of 0.832, and similarly effective results for left ventricular longitudinal strain and right ventricular longitudinal strain. Additionally, left atrial peak early negative strain rate and left ventricular circumferential strain showed significant correlations with troponin I levels, indicating myocardial injury. CONCLUSIONS: Cardiovascular magnetic resonance feature-tracking-derived strain parameters, particularly left atrial peak early negative strain rate and left ventricular circumferential strain, effectively diagnose acute myocarditis across different EFs, enhancing diagnostic accuracy and facilitating early detection, notably in patients with preserved EF.

Epidemiology of Schmorl's Node in the Thoracic Spine: A Subtype Analysis.

STUDY DESIGN: Retrospective observational study. OBJECTIVE: To describe the epidemiology of Schmorl's nodes (SN) of primarily developmental cause (SNd) and SN of primarily acquired cause (SNa) separately in the thoracic spine in subjects aged 35 to 90 years old. SUMMARY OF BACKGROUND DATA: The epidemiology of SN and its relationship with age and gender remain controversial. On the basis of a pathophysiological hypothesis and the different morphologic characteristics, two subtypes of SN may exist and should be considered separately. PATIENTS AND METHODS: Chest CT scans of subjects who came to our institution for health checks aged 35 to 90 years old were retrospectively reviewed. The presence or absence of SN was recorded for each thoracic vertebra. The SNs were further classified into SNd and SNa. The prevalence, location, and relationship with age, gender, and bone mineral density (BMD) were evaluated separately for the two subtypes. RESULTS: Of the 848 subjects (407 female, mean age: 53±12.2 yr) included, 15.7% had SNs. Of the 303 SNs, 49.2% were SNd, and 48.5% were SNa. Aging increased the prevalence of SNa, while it was not related to the prevalence of SNd. Males had significantly more SNd than females (11.3% vs. 4.7%, P <0.001), while the prevalence of SNa was not different between the two genders (10.2% vs. 9.1%, P =0.666). A similar distribution of SNd and SNa among thoracic vertebral levels was appreciated, with T9 most frequently involved. Subjects with SNa had lower lumbar BMD than controls ( P =0.006), while no significant difference in BMD was found between subjects with SNd and controls ( P =0.166). CONCLUSIONS: The clinical characteristics of SN differ based on the developmental and acquired subtypes, including the relationship with age, gender, and BMD. The subtypes may be considered distinct clinical entities as a result.

How spin relaxes and dephases in bulk halide perovskites.

Spintronics in halide perovskites has drawn significant attention in recent years, due to their highly tunable spin-orbit fields and intriguing interplay with lattice symmetry. Here, we perform first-principles calculations to determine the spin relaxation time (T1) and ensemble spin dephasing time ([Formula: see text]) in a prototype halide perovskite, CsPbBr3. To accurately capture spin dephasing in external magnetic fields we determine the Landé g-factor from first principles and take it into account in our calculations. These allow us to predict intrinsic spin lifetimes as an upper bound for experiments, identify the dominant spin relaxation pathways, and evaluate the dependence on temperature, external fields, carrier density, and impurities. We find that the Fröhlich interaction that dominates carrier relaxation contributes negligibly to spin relaxation, consistent with the spin-conserving nature of this interaction. Our theoretical approach may lead to new strategies to optimize spin and carrier transport properties.

Removal of toxic metals using iron sulfide particles: A brief overview of modifications and mechanisms.

Growing mechanization has released higher concentrations of toxic metals in water and sediment, which is a critical concern for the environment and human health. Recent studies show that naturally occurring and synthetic iron sulfide particles are efficient at removing these hazardous pollutants. This review seeks to provide a concise summary of the evolution in the production of iron sulfide particles, specifically nanoparticles, through the years. This review presents an outline of the synthesis process for the most dominant forms of iron sulfide: mackinawite (FeS), pyrite (FeS2), pyrrhotite (Fe1-x S), and greigite (Fe3S4). The review confirms that both natural forms of iron sulfide and modified forms of iron sulfide are highly effective at removing different heavy metals and metalloids from water. Concurrently, this review reveals the interaction mechanism between toxic metals and iron sulfide, along with the impact of conditions for remedy and rectification. None the less, modifications and future investigations into the synthesis of novel iron sulfides, their use to adsorb diverse environmental pollutants, and their fate after injection into polluted aquifers, remain crucial to maximizing pollution control.