Artificial and Biosynthetic Nanoparticles Boost Bioelectrochemical Reactions via Efficient Bidirectional Electron Transfer of Shewanella loihica.

Bioelectrochemical reactions using whole-cell biocatalysts are promising carbon-neutral approaches because of their easy operation, low cost, and sustainability. Bidirectional (outward or inward) electron transfer via exoelectrogens plays the main role in driving bioelectrochemical reactions. However, the low electron transfer efficiency seriously inhibits bioelectrochemical reaction kinetics. Here, a three dimensional and artificial nanoparticles-constituent inverse opal-indium tin oxide (IO-ITO) electrode is fabricated and employed to connect with exoelectrogens (Shewanella loihica PV-4). The above electrode collected 128-fold higher cell density and exhibited a maximum current output approaching 1.5 mA cm-2 within 24 h at anode mode. By changing the IO-ITO electrode to cathode mode, the exoelectrogens exhibited the attractive ability of extracellular electron uptake to reduce fumarate and 16 times higher reverse current than the commercial carbon electrode. Notably, Fe-containing oxide nanoparticles are biologically synthesized at both sides of the outer cell membrane and probably contributed to direct electron transfer with the transmembrane c-type cytochromes. Owing to the efficient electron exchange via artificial and biosynthetic nanoparticles, bioelectrochemical CO2 reduction is also realized at the cathode. This work not only explored the possibility of augmenting bidirectional electron transfer but also provided a new strategy to boost bioelectrochemical reactions by introducing biohybrid nanoparticles.

Overlooked Role of Fungi in Drinking Water Taste and Odor Issues.

Taste and odor (T&O) are among the most frequently encountered aesthetic issues in drinking water. While fungi have been reported to produce offensive odors, their contribution to T&O in drinking water remains understudied and often overlooked. In this study, the profiles of fungal community and odorants produced by 10 native fungal isolates were investigated in 36 samples collected from two drinking water treatment plants and a premise plumbing system. A total of 17 odorants were identified with Penicillium, Aspergillus, Paecilomyces, and Alternaria genera exhibiting the highest odorant yields. Significant concentrations of musty/earthy compounds were produced by these fungal isolates, such as 2-methylisoborneol (2-MIB) (26-256 ng/L), geosmin (10-13 ng/L), and 2-isobutyl-3-methoxy-pyrazine (IBMP) (3-13 ng/L). The high odor activity value of the odorants primarily occurred within 4 d, while toxicity continued to increase during the 8 d incubation. UV treatment in premise plumbing significantly (p < 0.05) reduced the gene read counts of Ascomycota phylum, Aspergillus spp., Fusarium spp., Rhizopus spp., and Trichoderma spp., by 2.3-4.0 times. These findings underscore the previously underestimated role of fungi in contributing to T&O issues in drinking water and corresponding risks to consumers and indicate UV as a promising strategy for fungal control in drinking water.

Insight into the formation of iodinated trihalomethanes during chlorination, monochloramination, and dichloramination of iodide-containing water.

In this study, the formation of iodinated trihalomethanes (I-THMs) was systematically evaluated and compared for three treatment processes - (i) chlorination, (ii) monochloramine, and (iii) dichloramination - under different pH conditions. The results demonstrated that I-THM formation decreased in the order of monochloramination > dichloramination > chlorination in acidic and neutral pH. However, the generation of I-THMs increased in the dichloramination < chlorination < monochloramination order in alkaline condition. Specifically, the formation of I-THMs increased as pH increased from 5 to 9 during chlorination and monochloramination processes, while the maximum I-THM formation occurred at pH 7 during dichloramination. The discrepancy could be mainly related to the stability of the three chlor (am) ine disinfectants at different pH conditions. Moreover, in order to gain a thorough insight into the mechanisms of I-THM formation during dichloramination, further investigation was conducted on the influencing factors of DOC concentration and Br-/I- molar ratio. I-THM formation exhibited an increasing and then decreasing trend as the concentration of DOC increased from 1 to 7 mg-C/L, while the yield of I-THMs increased with increasing Br-/I- molar ratio from 5:0 to 5:10. During the three processes mentioned above, similar I-THM formation results were also obtained in real water, which indicates that the excessive generation of I-THMs should be paid special attention during the disinfection of iodide-containing water.

A Novel Mixture Model to Estimate the Time to Drug Effect Onset and Its Association with Covariates.

OBJECTIVE: Drugs take effect at different times in different individuals. Consequently, researchers seek to examine how the timing of the biological response to drugs may be affected by factors such as gender, genotypes, age, or baseline symptom scores. METHODS: Typically, studies measure symptoms immediately after the initiation of drug treatment and then at a sequence of later time points. In this study, we develop a statistical mixture model for analyzing such longitudinal data. Our method estimates the onset of drug effect and assesses the association between the probability distribution of the onset times and possible contributing factors. Our mixture model treats the timing of onset as missing for each individual but restricts it, for simplicity, to two possible onset points, early or late. To estimate the model, we use an expectation-maximization-based approach and provide the general formulas of the variance and covariance matrix for the estimated parameters. RESULTS: We evaluate the model's overall utility and performance via simulation studies. In addition, we illustrate its use by application to longitudinal data from the Sequenced Treatment Alternatives to Relieve Depression (STAR*D) study. The algorithm identified age and anxiety status as significant factors in affecting the onset distribution of citalopram (Celexa).

A biocompatible electrode/exoelectrogens interface augments bidirectional electron transfer and bioelectrochemical reactions.

Bidirectional electron transfer is about that exoelectrogens produce bioelectricity via extracellular electron transfer at anode and drive cytoplasmic biochemical reactions via extracellular electron uptake at cathode. The key factor to determine above bioelectrochemical performances is the electron transfer efficiency under biocompatible abiotic/biotic interface. Here, a graphene/polyaniline (GO/PANI) nanocomposite electrode specially interfacing exoelectrogens (Shewanella loihica) and augmenting bidirectional electron transfer was conducted by in-situ electrochemical modification on carbon paper (CP). Impressively, the GO/PANI@CP electrode tremendously improved the performance of exoelectrogens at anode for wastewater treatment and bioelectricity generation (about 54 folds increase of power density compared to blank CP electrode). The bacteria on electrode surface not only showed fast electron release but also exhibited high electricity density of extracellular electron uptake through the proposed direct electron transfer pathway. Thus, the cathode applications of microbial electrosynthesis and bio-denitrification were developed via GO/PANI@CP electrode, which assisted the close contact between microbial outer-membrane cytochromes and nanocomposite electrode for efficient nitrate removal (0.333 mM/h). Overall, nanocomposite modified electrode with biocompatible interfaces has great potential to enhance bioelectrochemical reactions with exoelectrogens.

Enhanced 2-MIB degradation by UV-LED/chlorine process: reaction kinetics, wavelength dependence, influencing factors and degradation pathways.

The efficient removal of 2-Methylisoborneol (2-MIB), a typical odour component, in water treatment plants (WTPs), poses a great challenge to conventional water treatment technology due to its chemical stability. In this study, the combination of ultraviolet light-emitting diode (UV-LED) and chlorine (UV-LED/chlorine) was exploited for 2-MIB removal, and the role of ultraviolet (UV) wavelength was investigated systematically. The results showed that UV or chlorination alone did not degrade 2-MIB effectively, and the UV/chlorine process could degrade 2-MIB efficiently, following the pseudo-first-order kinetic model. The 275 nm UV exhibited higher 2-MIB degradation efficiency in this UV-LED/chlorine system than 254 nm UV, 265 nm UV and 285 nm UV due to the highest mole adsorption coefficient and quantum yield of chlorine in 275 nm UV. ·OH and ·Cl produced in the 275 nm UV/chlorine system played major roles in 2-MIB degradation. HCO3- and Natural organic matter (NOM), prevalent in water, consumed ·OH and ·Cl, thus inhibiting the 2-MIB degradation by UV-LED/chlorine. In addition, NOM and 2-MIB could form a photonic competition effect. The degradation of 2-MIB by UV-LED/chlorine was done mainly through dehydration and demethylation, and odorous intermediates, such as camphor, were produced. 2-MIB was degraded through the α bond fracture and six-membered ring opening to form saturated or unsaturated hydrocarbons and aldehydes. Four DBPs, chloroform (CF), trichloroacetaldehyde (TCE), trichloroacetone (TCP) and dichloroacetone (DCP), were mainly generated, and CF was the most significant by-product.

Comparison of four pre-oxidants coupled powdered activated carbon adsorption for odor compounds and algae removal: Kinetics, process optimization, and formation of disinfection byproducts.

Pre-oxidation and powdered activate carbon (PAC) are usually used to remove algae and odorants in drinking waterworks. However, the influence of interaction between oxidants and PAC on the treatment performance are scarcely known. This study systematically investigated the combination schemes of four oxidants (KMnO4, NaClO, ClO2, and O3) and PAC on the inactivation of Microcystis aeruginosa cells and removal of four frequently detected odorants in raw water (diethyl disulfide (DEDS), 2,2'-oxybis(1chloropropane) (DCIP), 2-methylisoborneol (2-MIB) and geosmin (GSM)). O3 showed highest pseudo-first-order removal rate for all four compounds and NaClO exhibited highest inactivation rates for the cell viability and Chlorophyll a (Chl-a). The Freundlich model fitted well for the adsorption of DEDS and DCIP by PAC. When treated by combined oxidation/PAC, the removal ratio of algae cells and odorants were lower (at least 1.6 times) than the sum of removal ratios obtained in oxidation or PAC adsorption alone. Among these four oxidants, the highest synchronous control efficiency of odorants (52 %) and algae (66 %) was achieved by NaClO/PAC. Prolonging the dosage time interval promoted the removal rates. The pre-PAC/post-oxidation processes possessed comparable efficiency for the removal of odorants and algae cells comparing with pre-oxidation/post-PAC process, but significantly inhibited formation of disinfection byproducts (DBPs), especially for the formation of C-DBPs (for NaClO and ClO2), bromate (for O3) and chlorate/chlorite (for ClO2). This study could provide a better understanding of improving in-situ operation of the combined pre-treatments of oxidation and PAC for source water.

[Pollution Characteristics, Source Apportionment, and Meteorological Response of Water-soluble Ions in PM2.5 in Xinxiang, North China].

Pollution variation, source characteristics, and meteorological effects of water-soluble inorganic ions (WSIIs) in PM2.5 were analyzed in Xinxiang city, Henan Province. PM2.5 samples and their chemical components were monitored online by using URG-9000 in four seasons:winter (January, 2022), spring (April, 2022), summer (July, 2022), and fall (October, 2022). The results showed that the TWSIIs had the same seasonal fluctuations as PM2.5. The average seasonal concentrations of WSIIs ranged from 19.62-72.15 µg·m-3, accounting for more than 60% of PM2.5, demonstrating that WSIIs were the major components of PM2.5. The annual concentration value of NO3-/SO42- was 2.11, which showed an increasing trend, suggesting predominantly mobile sources for secondary inorganic aerosols (SNA). Further, the molar concentration value [NH4+]/[NO3-] was 1.95, demonstrating that agriculture emissions were the dominant contributors to atmospheric nitrogen. Furthermore, the backward trajectory analysis showed that the concentrations of Ca2+ and Mg2+ were higher when the northeasterly wind prevailed and the wind speed was high. High values of SOR and NOR were correlated with low temperatures and high relative humidity (T < 8℃, RH > 60%), demonstrating that more gaseous precursors were converted into sulfate and nitrate. At high temperatures (T > 24℃), there was no apparent high NOR value like that for SOR, mainly due to the decomposition of NH4NO3 at high temperatures. Finally, backward trajectories associated with the PMF-resolved results were used to explore the regional transport characteristics. The results illustrated that dust sources in the study areas were mainly influenced by air trajectories originating from the northwest regions, whereas secondary sulfate, secondary nitrate, and biomass sources contributed more to WSIIs when wind speed and altitude air masses were low in the area surrounding the observation site.

Wavelength dependency and photosensitizer effects in UV-LED photodegradation of iohexol.

Iodinated X-ray contrast media (ICM) are ubiquitously present in water sources and challenging to eliminate using conventional processes, posing a significant risk to aquatic ecosystems. Ultraviolet light-emitting diodes (UV-LED) emerge as a promising technology for transforming micropollutants in water, boasting advantages such as diverse wavelengths, elimination of chemical additives, and no induction of microorganisms' resistance to disinfectants. The research reveals that iohexol (IOX) degradation escalates as UV wavelength decreases, attributed to enhanced photon utilization efficiency. Pseudo-first-order rate constants (kobs) were determined as 3.70, 2.60, 1.31 and 0.65 cm2 J-1 at UV-LED wavelengths of 255, 265, 275 and 285 nm, respectively. The optical properties of dissolved organic matter (DOM) and anions undeniably influence the UV-LED photolysis process through photon competition and the generation of reactive substances. The influence of Cl- on IOX degradation was insignificant at UV-LED 255, but it promoted IOX degradation at 265, 275 and 285 nm. IOX degradation was accelerated by ClO2-, NO3-and HA due to the formation of various reactive species. In the presence of NO3-, the kobs of IOX followed the order: 265 > 255 > 275 > 285 nm. Photosensitizers altered the spectral dependence of IOX, and the intermediate photoactivity products were detected using electron spin resonance. The transformation pathways of IOX were determined through density functional theory calculations and experiments. Disinfection by-products (DBPs) yields of IOX during UV-LED irradiation decreased as the wavelength increased: 255 > 265 > 275 > 285 nm. The cytotoxicity index value decreased as the UV-LED wavelength increased from 255 to 285 nm. These findings are crucial for selecting the most efficient wavelength for UV-LED degradation of ICM and will benefit future water purification design.

Cannabinoid receptor 2 alleviates sepsis-associated acute lung injury by modulating maturation of dendritic cells.

BACKGROUND: Dendritic cells (DCs) play a key role in a variety of inflammatory lung diseases, but their role in sepsis-associated acute lung injury (SA-ALI) is currently not been illuminated. Cannabinoid receptor 2 (CNR2) has been reported to regulate the DCs maturation. However, whether the CNR2 in DCs contributes to therapeutic therapy for SA-ALI remain unclear. In current study, the role of CNR2 on DCs maturation and inflammatory during SA-ALI is to explored. METHODS: First, the CNR2 level was analyzed in isolated Peripheral Blood Mononuclear Cells (PBMCs) and Bronchoalveolar Lavage Fluid (BALF) from patient with SA-ALI by qRT-PCR and flow cytometry. Subsequently, HU308, a specific agonist of CNR2, and SR144528, a specific antagonist of CNR2, were introduced to explore the function of CNR2 on DCs maturation and inflammatory during SA-ALI. Finally, CNR2 conditional knockout mice were generated to further confirm the function of DCs maturation and Inflammation during SA-ALI. RESULTS: First, we found that the expression of CNR2 on DCs was decreased in patient with SA-ALI. Besides, the result showed HU308 could decrease the maturation of DCs and the level of inflammatory cytokines, simultaneously reduce pulmonary pathological injury after LPS-induced sepsis in mice. In contrast of HU308, SR144528 exhibits opposite function of DCs maturate, inflammatory cytokines and lung pathological injury. Furthermore, comparing with SR144528 treatment, similar results were obtained in DCs specific CNR2 knockout mice after LPS treatment. CONCLUSION: CNR2 could alleviate SA-ALI by modulating maturation of DCs and inflammatory factors levels. Targeting CNR2 signaling specifically in DCs has therapeutic potential for the treatment of SA-ALI.

Degradation of odorous 2,4,6-trichloroanisole in chlorinated water by UV-LED/chlorination: kinetics and influence factors.

2,4,6-Trichloroanisole (2,4,6-TCA) has aroused a special concern for their odor problem and potential threats. In this study, the degradation of 2,4,6-TCA by UV/chlorination with different UV sources was compared, including low-pressure mercury lamp (LPUV, 254 nm) and ultraviolet light-emitting diode (UV-LED, 275 and 285 nm). The maximum removal of 2,4,6-TCA can be achieved by 275-nm UV-LED/chlorination in neutral and alkaline conditions which was 80.0%. The reaction, kinetics, and water matrix parameters on 2,4,6-TCA degradation were also evaluated. During UV-LED (275 nm)/chlorination, 2,4,6-TCA degradation was mainly caused by direct UV photolysis and indirect hydroxyl radical (HO·) oxidation, while reactive chlorine radicals (RCSs) had a negligible contribution. The second-order rate constant between HO· and 2,4,6-TCA was determined as 3.1 × 109 M-1 s-1. Increasing initial chlorine dosage and decreasing 2,4,6-TCA concentration or pH value significantly promoted 2,4,6-TCA degradation during UV/chlorination process. The presence of natural organic matter (NOM) and bicarbonate (HCO3-) can inhibit 2,4,6-TCA degradation, while chloride ion (Cl-) had a negligible effect. The kinetic model for 2,4,6-TCA degradation was established and validated, and the degradation pathways were proposed based on the identified intermediates. Furthermore, UV-LED (275 nm)/chlorination also exhibited a promising effect on 2,4,6-TCA removal in real water, which can be used to control 2,4,6-TCA pollution and odor problems.

Mixed chlorine/chloramines in disinfected water and drinking water distribution systems (DWDSs): A critical review.

Mixed chlorine/chloramines are commonly occurring in real drinking water distribution systems (DWDSs) but often overlooked. This review provides a comprehensive overview of the occurrences, characteristics, analysis methods, and control strategies of mixed chlorine/chloramines in DWDSs. The characteristics of mixed chlorine/chloramine species are summarized for treated water in drinking water treatment plants (DWTPs), secondary disinfection facilities, and DWDSs where different disinfectants could be blended. The key to differentiating and quantifying mixed chlorine/chloramine species is to separate organic chloramines (OCs) from di/tri-chloramines and overcome certain interferences. The complex interactions between water matrixes and chlorine/chloramine species could accelerate pipeline corrosions, enhance emerging disinfection by-products risks, lead to off-flavors in drinking water, and induce bio-instability issues (such as nitrification, microorganism regrowth, and promotion of horizontal gene-transfers). Three promising strategies for alleviating mixed chlorine/chloramine species are recommended, which include (i) removing precursors intensively and reconditioning the treated water, (ii) combining UV irradiation to eliminate undesired chlorine/chloramines species, and (iii) strengthening monitoring, operation, and maintenance management of DWDSs. Finally, the challenges for gaining insights into the mechanisms of mixed chlorine/chloramine species conversion are discussed and promising research directions are proposed.

Chlorine dioxide-based oxidation processes for water purification：A review.

Chlorine dioxide (ClO2) has emerged as a broad-spectrum, safe, and effective disinfectant due to its high oxidation efficiency and reduced formation of organochlorinated by-products during application. This article provides an updated overview of ClO2-based oxidation processes used in water treatment. A systematic review of scientific information and experimental data on ClO2-based water purification procedures is presented. Concerning ClO2-based oxidation derivative problems, the pros and cons of ClO2-based combined processes are assessed and disinfection by-product (DBP) control approaches are proposed. The kinetic and mechanistic data on ClO2 reactivity towards micropollutants are discussed. ClO2 selectively reacts with electron-rich moieties (anilines, phenols, olefins, and amines) and eliminates certain inorganic ions and microorganisms with high efficiency. The formation of chlorite and chlorate during the oxidation process is a crucial concern when utilizing ClO2. Future applications include the combination of ClO2 with ferrous ions, activated carbon, ozone, UV, visible light, or persulfate processes. The combined process can reduce by-product generation while still ensuring ClO2 sterilization and disinfection. Overall, this research could provide useful information and new insights into the application of ClO2-based technologies.

Organic chloramines attenuation and disinfection by-product formation during UV, chlorination and UV/chlorine processes.

Organic chloramines (OCs) have become one of the research focuses in the field of drinking water treatment due to its limited oxidation and sterilization ability as well as potential cytotoxicity and genetic toxicity to the public. Among widespread OCs, produced by chlorinating cytosine are a typical one exists during chlorine disinfection. OCs degradation during UV, chlorination and UV/chlorine processes were systematically investigated. UV irradiation at 254 nm could effectively degrade OCs by 96.6% after 60 min, mainly because N-Cl bond had significant UV absorption at 250-280 nm leading to the generation of Cl• and HO•. Direct chlorination had poor removal of OCs with the OCs concentration increased first and then decreased as time went by. On the other hand, the removal of OCs during UV/chlorination was much higher than that during chlorination, but was worse than that during UV alone. pH had a minor effect on OCs decomposition via UV irradiation, whereas the effect was pronounced in the chlorination and UV chlorine processes. UV wavelength can affect the degradation of OCs with efficiency decreased in the order of UV 254 > UV 265 > UV 275. The total yields of disinfection by-products (DBPs) during the degradation of OCs followed UV/chlorine > UV > chlorination. CH and DCAA were the two dominant types of DBPs among detected 7 DBPs. DBPs yield followed the order of UV254 > UV265 > UV275 at pH 6.0 and 7.0. After UV 265 irradiation, DBPs yield slightly decreased by 2.4%, 3.0% and 6.6% with the pH increased from 6.0 to 9.0. The results can provide theoretical basis for effective control of OCs in drinking water.

[Nanoscale Zero-valent Copper-Activated Molecular Oxygen for the Degradation of Enrofloxacin in Water].

Systematically studied the oxidation of enrofloxacin (ENR) in a nanoscale zero-valent copper (nZVC)-activated molecular oxygen system. The results show that nanoscale copper powder has a higher surface area than microscale copper powder, non-porous structure, and rough surface and exists in form of agglomerates. Nanoscale ZVC shows a superior activated performance toward molecular oxygen compared with microscale ZVC, which is due to its larger specific area and the fact that it corrodes easier. The H2O2 generated from the activation of molecular oxygen and the Cu+ released from surface corrosion form a novel Fenton-like system in which hydroxyl radicals are continuously produced, resulting in high-efficiency removal of ENR from water. The superoxide radicals produced during the reaction promote the reduction of Cu2+ to Cu+, thus speeding up the removal of ENR. The reaction conditions have a certain effect on the ENR degradation in nZVC-activated molecular oxygen systems. A higher nZVC dosage, lower ENR concentration, higher reaction temperature, and strong acidic conditions are favorable for the ENR removal.

A study on the preparation and application of a core-shell surface imprinted uranyl magnetic chelating adsorbent.

A core-shell surface imprinted uranyl magnetic chelating adsorbent (UMCA) was synthesized by combining the sol-gel process with the surface molecular imprinting technique (SMIT). A specific salophen and uranyl-salophen were designed and synthesized. Then, the synthesized uranyl-salophen complex was used as a template (in which uranyl is the target analyte), 3-aminopropyltriethoxysilane as a functional monomer and tetraethylorthosilicate as a cross-linker. The obtained UMCA was characterized by a variety of modern analytical and detection techniques. The adsorbent can be used for the solid-phase extraction of uranyl with good selectivity, high adsorption capacity, magnetic separation characteristics and good reusability. The chelating sorbent was successfully applied for the separation of uranyl, followed by multiphase photocatalytic resonance fluorescence method determination in several environmental water samples with a relative standard deviation of <5.48% and spiked recoveries of 92.5% to 103.0%. The adsorption mechanism was preliminarily discussed.

[Base Activation of Peroxymonosulfate for the Degradation of Ciprofloxacin in Water].

The degradation of ciprofloxacin (CIP) in a base activated peroxymonosulfate (PMS) system was investigated. Results showed that a base activated PMS system can efficiently remove CIP. Singlet oxygen (1 O2) and superoxide anion radical (O2-·) were confirmed to be the major reactive oxygen species through radical quenching experiments. The NaOH concentration, PMS concentration, reactive temperature, and coexisting anions also affected CIP removal. Both NaOH and PMS concentration presented a dual effect, which was highly concentration dependent. An improvement in reactive temperature accelerated CIP degradation, and the calculated activation energy (Ea) was determined to be 5.09 kJ·mol-1 through the fitting of the Arrhenius equation. Different anions had different effects on CIP degradation. No obvious change in CIP concentration was observed when Cl-, SO42-, and NO3- were introduced. H2PO42- inhibited the degradation, but CO32- significantly promoted it. Ten oxidation products were identified through UPLC-MS/MS analysis, and the piperazine ring in the molecular structure of CIP was preferentially attacked by reactive oxygen species in the base activated PMS system.