Calcium Single Atom Confined in Nitrogen-Doped Carbon-Coupled Polyvinylidene Fluoride Membrane for High-Performance Piezocatalysis.

A piezoelectric polymer membrane based on single metal atoms was demonstrated to be effective by anchoring isolated calcium (Ca) atoms on a composite of nitrogen-doped carbon and polyvinylidene fluoride (PVDF). The addition of Ca-atom-anchored carbon nanoparticles not only promotes the formation of the ß phase (from 29.8 to 56.3%), the most piezoelectrically active phase, in PVDF, but also introduces much higher porosity and hydrophilicity. Under ultrasonic excitation, the fabricated catalyst membrane demonstrates a record-high and stable dye decomposing rate of 0.11 min-1 and antibacterial efficiencies of 99.8%. Density functional theory calculations reveal that the primary contribution to catalytic activity arises from single-atom Ca doping and that a possible synergistic effect between PVDF and Ca atoms can improve the catalytic performance. It is shown that O2 molecules can be easily hydrogenated to produce ·OH on Ca-PVDF, and the local electric field provided by the ß-phase-PVDF might enhance the production of ·O2-. The proposed polymer membrane is expected to inspire the rational design of piezocatalysts and pave the way for the application of piezocatalysis technology for practical environmental remediation.

In Situ Construction of a Hydrophobic Honeycomb-like Structured ZnMoO4 Coating Applied for Enhancing Zinc Anode Performance.

Aqueous zinc-ion batteries (AZIBs) suffer from sharp cycling deterioration due to serious interfacial side reactions and corrosion problems on the zinc anode. Herein, an efficacious approach to construct hydrophobic ZnMoO4 coatings on Zn (denoted as Zn@ZMO) is proposed to mitigate direct contact between the zinc anode and electrolyte and enhance its cycle life. The hydrophobic ZnMoO4 layer (contact angle = 128°) with a honeycomb-like structure is prepared by an in situ liquid phase deposition method. The as-prepared ZnMoO4 coating exhibits persistent corrosion protection for Zn through 30 days of immersion in a 2 M ZnSO4 electrolyte, indicating excellent stability of the ZnMoO4 layer and ensuring its available application in AZIBs. Unique microchannels in this kind of honeycomb-like structured coating favor Zn2+ ion diffusion and ease of ion transport, especially at high current cycling. Its robust surface exclusion can effectively counter other side reactions induced by water, simultaneously. As a result, the Zn@ZMO symmetrical cell shows a remarkable cycle lifespan exceeding 2700 h at 1 mA cm-2/1 mA h cm-2, surpassing that of the bare zinc cell by more than 100 folds. At a current density of 5 A g-1, the Zn@ZMO//V2O5 cell can still achieve a specific capacity of 167.0 mA h g-1 after 500 cycles with a capacity retention rate of 88%, which demonstrates its long-term cycling stability.

Ultrathin Ni-Fe MOF Nanosheets: Efficient and Durable Water Oxidation at High Current Densities.

Efficient, durable, and economical electrocatalysts are crucial for advancing energy technology by facilitating the oxygen evolution reaction (OER). Here, ultrathin Ni-Fe metal-organic skeleton (MOF) nanosheets were created in situ on nickel foam (NiFe-UMNs/NF). The catalyst exhibited excellent OER catalytical abilities, with only 269 mV overpotentials at 250 mA cm-2. Besides, when integrated with Pt/C/NF, NiFe-UMNs/NF held the potential for application in industrial alkaline water electrolysis with an initial voltage retention of approximately 86% following a continuous operation of 100 h at a current density of 250 mA cm-2. The super performance of the NiFe-UMNs/NF catalyst was attributed to ultrathin morphology, super hydrophilicity, and synergistic effects between Ni and Fe within the MOF. In situ Raman showed that NiFe-UMNs were converted to NiFeOOH as the active species in the OER process. Density functional theory revealed that iron doping accelerated the rate-determining step and reduced the OER reaction energy barrier. This work elucidated a promising electrocatalyst for OER and enriched the practical implementation of MOF materials.

Sulfonyl Molecules Induced Oriented Lithium Deposition for Long-Term Lithium Metal Batteries.

Dendrites growth and unstable interfacial Li+ transport hinder the practical application of lithium metal batteries (LMBs). Herein, we report an active layer of 2,4,6-trihydroxy benzene sulfonyl fluorine on copper substrate that induces oriented Li+ deposition and generates highly crystalline solid-electrolyte interphase (SEI) to achieve high-performance LMBs. The lithiophilic -SO2 - groups of highly crystalline SEI accept the rapidly transported Li+ ions and form a dense inner layer of LiF and Li3 N, which regulate Li+ plating morphology along the (110) crystal surface toward dendrite-free Li anode. Thus, Li||Cu cells with lithiophilic SEI achieve an average deposition efficiency of 99.8 % after 700 cycles, and Li||Li cells operate well for 1100 h. Besides, Li||LiNi0.8 Co0.1 Mn0.1 O2 cells with modified SEI exhibit a capacity retention that is 14 times than that of conventional SEI. Even at -60 °C, Li||Cu cells reach stable deposition efficiency of 83.2 % after 100 cycles.

Electrodeposition-Assisted Crystal Growth Regulation of PdBi Clusters on Carbon Cloths for Ethanol Oxidation.

Carbon-supported Pd-based clusters are one of the most promising anodic catalysts for ethanol oxidation reaction (EOR) due to their encouraging activity and practical applications. However, unclear growth mechanism of Pd-based clusters on the carbon-based materials has hindered their extensive applications. Herein, we first introduce multi-void spherical PdBi cluster/carbon cloth (PdBi/CC) composites by an electrodeposition routine. The growth mechanism of PdBi clusters on the CC supports has been systemically investigated by evaluating the selected samples and tuning their compositions, which involve the big difference in standard redox potential between Pd2+/Pd and Bi3+/Bi and easy adsorption of Bi3+ on the surface of Pd-rich seeds. Benefitting from the ensembles of many nanocrystal subunits, multi-void spherical PdBi clusters can present collective properties and novel functionalities. In addition, the outstanding characteristics of CC supports enable PdBi clusters with stable nanostructures. Thanks to the unique structure, Pd20Bi/CC catalysts manifest higher EOR activity and better stability compared to Pd/CC. Systematic characterizations and a series of CO poisoning tests further confirm that the dramatically enhanced EOR activity and stability can be attributed to the incorporation of Bi species and the strong coupling of the structure between PdBi clusters and CC supports.

In Situ Construction of Aramid Nanofiber Membrane on Li Anode as Artificial SEI Layer Achieving Ultra-High Stability.

Achieving uniform Li deposition is vital for the construction of a safe but also efficient Li-metal anode for Li-metal batteries (LMBs). Herein, a facile coating strategy is used for forming an ultra-thin aramid nanofiber (ANF) membrane, with a network structure, on a Li anode (ANF-Li) as an artificial layer inhibiting Li dendrite's growth. The results show that under an ultra-high current density of 50 mA cm-2 , the ANF-Li|ANF-Li symmetric cells can be kept stably cycled for a period exceeding 300 h. The ANF-Li|LiFePO4 full cells exhibit a high-capacity retention of 80.1% after 1200 cycles at 1 C, showing a promising potential for LMBs application. Combined experimental results with theoretical calculations, the excellent performance of the ANF-Li anode is explored. Lithiophilic polar functional groups (CO, NH) appear in the surface and structure of ANF membrane, which offer high-concentration functional sites for the Li ions to realize an effective adhesion at the molecular level. This work also finds fiber-shaped lithium deposition for the first time. Furthermore, the nanoscale porosity of the ANF membrane not only provides fast pathways and channels for the diffusion of the electrolyte and Li transportation, but also eliminates the "weak links" of micron-scale Li dendrites penetrating the membrane.

Superhydrophobic Films with Enhanced Corrosion Resistance and Self-Cleaning Performance on an Al Alloy.

In this article, a novel and facile method is used to construct superhydrophobic surfaces on aluminum alloys. A solution of aluminum chloride hexahydrate and N-dodecyltrimethoxysilane (DTMS) in ethanol was used as the electrolyte solution. The hydrolysis of DTMS was accelerated during the electrodeposition process, and the hydrolysate was bonded to a pretreated aluminum surface. The prepared aluminum alloy sample exhibits both superhydrophobicity (the surface water contact angle reached 155°) and excellent corrosion resistance. The inhibition efficiency of this sample is as high as 99.9% in 3.5 wt % NaCl solution, which remains at 98% even after 30 days of immersion. Thus, our fabrication can be well applied to the field of marine corrosion protection. Therefore, the working mechanism was discussed by confocal Raman microspectroscopy (CRM). In addition, the investigation by CRM and electrochemical impedance spectroscopy (EIS) also indicates that superhydrophobic samples show good stability in NaCl solution. The fabrication method can inspire new ideas for the construction of superhydrophobic aluminum alloys in the marine environment.

Nickel Nitride Particles Supported on 2D Activated Graphene-Black Phosphorus Heterostructure: An Efficient Electrocatalyst for the Oxygen Evolution Reaction.

Hydrogen is regarded as the most promising green clean energy in the 21st century. Developing the highly efficient and low-cost electrocatalysts for oxygen evolution reaction (OER) is of great concern for the hydrogen industry. In the water electrolyzed reaction, the overpotential and the kinetics are the main hurdles for OER. Therefore, an efficient and durable oxygen evolution reaction electrocatalyst is required. In this study, an activated graphene (AG)-black phosphorus (BP) nanosheets hybrid is fabricated for supporting Ni3 N particles (Ni3 N/BP-AG) in the application of OER. The Ni3 N particles are combined with the BP-AG heterostructure via facile mechanical ball milling under argon protection. The synthesized Ni3 N/BP-AG shows excellent catalytic performance toward the OER, demanding the overpotential of 233 mV for a current density of 10 mA cm-2 with a Tafel slope of 42 mV dec-1 . The Ni3 N/BP-AG catalysts also show remarkable stability with a retention rate of the current density of about 86.4% after measuring for 10 000 s in potentiostatic mode.

Extremely Efficient Decomposition of Ammonia N to N2 Using ClO• from Reactions of HO• and HOCl Generated in Situ on a Novel Bifacial Photoelectroanode.

The conversion of excess ammonia N into harmless N2 is a primary challenge for wastewater treatment. We present here a method to generate ClO• directionally for quick and efficient decomposition of NH4+ N to N2. ClO• was produced and enhanced by a bifacial anode, a front WO3 photoanode and a rear Sb-SnO2 anode, in which HO• generated on WO3 reacts with HClO generated on Sb-SnO2 to form ClO•. Results show that the ammonia decomposition rate of Sb-SnO2/WO3 is 4.4 times than that of WO3 and 3.3 times than that of Sb-SnO2, with achievement of the removal of NH4+ N on Sb-SnO2/WO3 and WO3 being 99.2 and 58.3% in 90 min, respectively. This enhancement is attributed to the high rate constant of ClO• with NH4+ N, which is 2.8 and 34.8 times than those of Cl• and HO•, respectively. The steady-state concentration of ClO• (2.5 × 10-13 M) is 102 times those of HO• and Cl•, and this is further confirmed by kinetic simulations. In combination with the Pd-Cu/NF cathode to form a denitrification exhaustion system, Sb-SnO2/WO3 shows excellent total nitrogen removal (98.4%), which is more effective than WO3 (47.1%) in 90 min. This study provides new insight on the directed ClO• generation and its application on ammonia wastewater treatment.

Research Progress on the Composite Methods of Composite Electrolytes for Solid-State Lithium Batteries.

In the current challenging energy storage and conversion landscape, solid-state lithium metal batteries with high energy conversion efficiency, high energy density, and high safety stand out. Due to the limitations of material properties, it is difficult to achieve the ideal requirements of solid electrolytes with a single-phase electrolyte. A composite solid electrolyte is composed of two or more different materials. Composite electrolytes can simultaneously offer the advantages of multiple materials. Through different composite methods, the merits of various materials can be incorporated into the most essential part of the battery in a specific form. Currently, more and more researchers are focusing on composite methods for combining components in composite electrolytes. The ion transport capacity, interface stability, machinability, and safety of electrolytes can be significantly improved by selecting appropriate composite methods. This review summarizes the composite methods used for the components of composite electrolytes, such as filler blending, embedded framework, and multilayer bonding. It also discusses the future development trends of all-solid-state lithium batteries (ASSLBs).

Oxygen Vacancy-Enhanced Ni3N-CeO2/NF Nanoparticle Catalysts for Efficient and Stable Electrolytic Water Splitting.

Highly efficient and cost-effective electrocatalysts are of critical significance in the domain of water electrolysis. In this study, a Ni3N-CeO2/NF heterostructure is synthesized through a facile hydrothermal technique followed by a subsequent nitridation process. This catalyst is endowed with an abundance of oxygen vacancies, thereby conferring a richer array of active sites. Therefore, the catalyst demonstrates a markedly low overpotential of 350 mV for the Oxygen Evolution Reaction (OER) at 50 mA cm-2 and a low overpotential of 42 mV for the Hydrogen Evolution Reaction (HER) at 10 mA cm-2. Serving as a dual-function electrode, this electrocatalyst is employed in overall water splitting in alkaline environments, demonstrating impressive efficiency at a cell voltage of 1.52 V of 10 mA cm-2. The in situ Raman spectroscopic analysis demonstrates that cerium dioxide (CeO2) facilitates the rapid reconfiguration of oxygen vacancy-enriched nickel oxyhydroxide (NiOOH), thereby enhancing the OER performance. This investigation elucidates the catalytic role of CeO2 in augmenting the OER efficiency of nickel nitride (Ni3N) for water electrolysis, offering valuable insights for the design of high-performance bifunctional catalysts tailored for water splitting applications.

Porous layered ZnV2O4@C synthesized based on a bimetallic MOF as a stable cathode material for aqueous zinc ion batteries.

Vanadium-based oxides are considered potential cathode materials for aqueous zinc ion batteries (AZIBs) due to their distinctive layered (or tunnel) structure suitable for zinc ion storage. However, the structural instability and sluggish kinetics of vanadium-based oxides have limited their capacity and cycling stability for large-scale applications. To overcome these shortcomings, here a porous vanadium-based oxide doped with zinc ions and carbon with the molecular formula ZnV2O4@C (ZVO@C) as the cathode material is synthesized by the pyrolysis of a bimetallic MOF precursor containing Zn/V. This electrode demonstrates a remarkable specific capacity of 425 mA h g-1 at 0.5 A g-1 and excellent cycling stability with about 97% capacity retention after 1000 cycles at 10 A g-1. The excellent electrochemical performance of ZVO@C can be attributed to more reaction active sites and the faster reaction kinetics for zinc ion diffusion and storage brought about by the porous layered spinel-type tunnel structure with high surface area and massive mesoporosity, as well as the enhanced electron transport efficiency and more stable channel structure achieved from the doped conductive carbon. The reaction mechanism and structural evolution of the ZVO@C electrode are analyzed using X-ray diffraction and X-ray photoelectron spectroscopy, revealing the formation of a new phase of ZnxV2O5·nH2O during the first charge, which participates in reversible cycling together with ZVO@C during the charging and discharging processes. Moreover, the energy storage mechanism is revealed, in which zinc ions and hydrogen ions jointly participate in intercalation and extraction. The present study demonstrates that constructing composite vanadium-based oxides based on bimetallic organic frameworks as precursor templates is an effective strategy for the development of high-performance cathode materials for AZIBs.

Oxygen Vacancy and Heterostructure Modulation of Co2P/Fe2P Electrocatalysts for Improving Total Water Splitting.

Designing a stable and highly active catalyst for hydrogen evolution and oxygen evolution reactions (HER/OER) is essential for the industrialization of hydrogen energy but remains a major challenge. This work reports a simple approach to fabricating coupled Co2P/Fe2P nanorod array catalyst for overall water decomposition, demonstrating the source of excellent activity in the catalytic process. Under alkaline conditions, Co2P/Fe2P heterostructures exhibit an overpotential of 96 and 220 mV for HER and OER, respectively, at 10 mA cm-2. For total water splitting, a low voltage of 1.56 V is required to provide a current density of 10 mA cm-2. And the catalyst exhibits long-term durability for 30 h at a high current density of 250 mA cm-2. The analysis of the results revealed that the presence of interfacial oxygen vacancies and the strong interaction between Co2P/Fe2P provided the catalyst with more electrochemically active sites and a faster charge transfer capability, which improved the hydrolysis dissociation process. Electrochemically active metal (oxygen) hydroxide phases were produced after OER stability testing. The results of this study prove its great potential in practical industrial electrolysis and provide a reasonable and feasible strategy for the design of nonprecious metal phosphide electrocatalysts.

High-performance bismuth vanadate photoanodes cocatalyzed with nitrogen, sulphur co-doped ferrocobalt-metal organic frameworks thin layer for photoelectrochemical water splitting.

In this study, we prepare a highly efficient BiVO4 photoanode co-catalyzed with an ultrathin layer of N, S co-doped FeCo-Metal Organic Frameworks (MOFs) for photoelectrochemical water splitting. The introduction of N and S into FeCo-MOFs enhances electron and mass transfer, exposing more catalytic active sites and significantly improving the catalytic performance of N, S co-doped FeCo-based MOFs in water oxidation. The optimized BiVO4/NS-FeCo-MOFs photoanode exhibits impressive results, with a photocurrent density of 5.23 mA cm-2 at 1.23 V vs. Reversible Hydrogen Electrode (RHE) and an incident photon-to-charge conversion efficiency (IPCE) of 74.4 % at 450 nm in a 0.1 M phosphate buffered solution (pH = 7). These values are 4.84 times and 6.2 times higher than those of the original BiVO4 photoanode, respectively. Furthermore, the optimized BiVO4/NS-FeCo-MOFs photoanode demonstrates exceptional long-term stability, maintaining 96 % of the initial current after five hours.

In Situ Encapsulation of SnS2/MoS2 Heterojunctions by Amphiphilic Graphene for High-Energy and Ultrastable Lithium-Ion Anodes.

Lithium-ion batteries with transition metal sulfides (TMSs) anodes promise a high capacity, abundant resources, and environmental friendliness, yet they suffer from fast degradation and low Coulombic efficiency. Here, a heterostructured bimetallic TMS anode is fabricated by in situ encapsulating SnS2/MoS2 nanoparticles within an amphiphilic hollow double-graphene sheet (DGS). The hierarchically porous DGS consists of inner hydrophilic graphene and outer hydrophobic graphene, which can accelerate electron/ion migration and strongly hold the integrity of alloy microparticles during expansion and/or shrinkage. Moreover, catalytic Mo converted from lithiated MoS2 can promote the reaction kinetics and suppress heterointerface passivation by forming a building-in-electric field, thereby enhancing the reversible conversion of Sn to SnS2. Consequently, the SnS2/MoS2/DGS anode with high gravimetric and high volumetric capacities achieves 200 cycles with a high initial Coulombic efficiency of >90%, as well as excellent low-temperature performance. When the commercial Li(Ni0.8Co0.1Mn0.1)O2 (NCM811) cathode is paired with the prelithiated SnS2/MoS2/DGS anode, the full cells deliver high gravimetric and volumetric energy densities of 577 Wh kg-1 and 853 Wh L-1, respectively. This work highlights the significance of integrating spatial confinement and atomic heterointerface engineering to solve the shortcomings of conversion-/alloying typed TMS-based anodes to construct outstanding high-energy LIBs.

Bio-inspired Ti3C2Tx MXene composite coating for enhancing corrosion resistance of aluminum alloy in acidic environments.

Aluminum alloy (Al alloy) suffers from severe corrosion in acidic solution. Two-dimensional (2D) MXene-based composite coatings show great prospects for corrosion protection on metals used in special conditions. The composite coatings still face challenges in complex functionalization and orientation control. In harsh conditions, the long-term ability and roles of MXene in corrosion protection are still not clear. Here, a bio-inspired myristic-calcium chloride-Ti3C2Tx MXene (MA + CaCl2 + MXene) composite coating is successfully prepared on aluminum alloy (Al alloy) by electrodeposition process. Electrochemical tests, surface morphology, and chemical composition are analyzed to investigate the corrosion resistance and protection mechanism of the MXene coating in acidic solution (0.5 M H2SO4 + 2 ppm HF). As a result, the incorporation of MXene can significantly reduce corrosion current density (7.498 × 10-8 A/cm2) by âˆ¼ 5 orders of magnitude and impedance modulus at 0.01 Hz (|Z|0.01 Hz) value of the composite coating is 196.8 Ω·cm2, which is over 4 times higher than that of bare Al alloy (40.74 Ω·cm2) after immersion test for 72 h. Furthermore, the in-situ corrosion test confirms the enhanced corrosion resistance of the MA + CaCl2 + MXene composite coating. The MXene can increase coating thickness to 23.6 ± 0.4 µm, reduce porosity to (5.845 ± 1) × 10-5, decrease the diffusion coefficients of H+ to (1.587 ± 0.3) × 10-9 cm2/s, and enhance the adhesion of the coating to the substrate (the delamination time exceeds 5 h), thus providing improved anti-corrosion ability. This strategy opens up new prospects for construction of 2D MXene-based anti-corrosion coatings.

Layered porous Mn0.18V2O5@C with manganese and carbon provided by a metal-organic framework precursor as a cathode material for aqueous zinc-ion batteries.

At present, vanadium-based cathodes for aqueous zinc-ion batteries (AZIBs) are limited by their slow reaction kinetics, poor electrical conductivity, and low capacity retention. To overcome these problems, here, we design a layered porous Mn0.18V2O5@C as the cathode material for AZIBs using a manganese-containing metal-organic framework as a template through a simple solvothermal method. Such an electrode delivers an excellent specific capacity (380 mA h g-1 at 0.1 A g-1) accompanied by superior cycling stability (about 85% capacity retention for 2000 cycles at 6 A g-1). The excellent electrochemical performance of Mn0.18V2O5@C is ascribed to the improved interface activity including smooth zinc ion transport, abundant ion reaction active sites and accelerated charge transfer resulting from the coordination of the porous structure, doped conductive carbon, and the stable channel structure derived from the pillar effect of doping manganese ions, preventing a premature collapse of the electrode structure. It is also revealed by structural evolution analysis that the residual zinc ions also combine with the original Mn0.18V2O5 to form a ZnxMnyV2O5 phase, which serves as an additional structural pillar and in the meantime, also participates in the following cycles. These favorable electrochemical results suggest that Mn0.18V2O5@C is a suitable cathode material for AZIBs.

Curved Porous PdCu Metallene as a High-Efficiency Bifunctional Electrocatalyst for Oxygen Reduction and Formic Acid Oxidation.

Designing high-efficiency and newly developed Pd-based bifunctional catalytic materials still faces tremendous challenges for oxygen reduction reaction (ORR) and formic acid oxidation reaction (FAO). Metallene materials with unique structural features are considered strong candidates for enhancing the catalytic performance. In this work, we synthesized copper-doped two-dimensional curved porous Pd metallene nanomaterials via a simplistic one-pot solvothermal method. The updated catalysts served as sturdy bifunctional electrocatalysts for cathodal ORR and anodic FAO. In particular, the developed PdCu metallene exhibits excellent half-wave potential (0.943 V vs RHE) and mass activity (MA) (1.227 A mgPt-1) in alkaline solutions, which are 1.09 and 6.26 times higher than those of commercial Pt/C, respectively, indicating that the nanomaterials have abundant active sites, displaying surpassing catalytic performance for oxygen reduction. Furthermore, in an acidic formic acid electrolyte, PdCu metallene exhibits prominent MA with a value of 0.905 A mgPd-1, which is 2.76 times that of commercial Pd/C. The remarkable bifunctional catalytic performance of metallene materials can be attributed to the special structure and electronic effects. This work shows that metallene materials with curved and porous properties provide a scientific idea for the development and design of efficient and steady electrocatalysts.

Repurposing of spent lithium-ion battery separator as a green reductant for efficiently refining the cathode metals.

Developing green and high-efficient pyrometallurgy processes to recycle precious metals from spent lithium-ion batteries (LIBs) is of great importance for resource sustainability and environmental protection. Herein, a novel reduction roasting approach relying on spent LIB separator to refine the spent cathode is proposed. The efficiency of repurposing separator as a reductant for roasting the spent LiCoO2 cathode and the underlying mechanisms were investigated. After the separator-mediated roasting at 500 °C for 2 h, Li+ leaching efficiency of the cathode reached 93.2 %, >2.6 times higher than those after roasting without reductant (25.2 %) or with benchmark reductant graphite (26.1 %). Under the separator-added roasting condition, the cathode was converted to the desired products, CoO and Li2CO3. Based on the analysis of in-situ reaction using thermogravimetric/differential scanning calorimetry and pyrolysis gas species identification, the separator-mediated reduction roasting of cathode was composed of two stages, i.e., reducing gas generation due to separator pyrolysis, followed by the reducing gas mediated LiCoO2 reduction. During the process, the generated C2H4 and CO dominated the reduction. The use of co-existing separator to recover precious metals from spent LIBs is an effective and sustainable strategy to maximize the utilization of spent LIBs.

Li3Bi/Li2O layer with uniform built-in electric field distribution for dendrite free lithium metal batteries.

Lithium metal batteries have garnered significant attention as a promising energy storage technology, offering high energy density and potential applications across various industries. However, the formation of lithium dendrites during battery cycling poses a considerable challenge, leading to performance degradation and safety hazards. This study aims to address this issue by investigating the effectiveness of a protective layer on the lithium metal surface in inhibiting dendrite growth. The hypothesis is that continuous lithium consumption during battery cycling is a primary contributor to dendrite formation. To test this hypothesis, a protective layer of Li3Bi/Li2O was applied to the lithium foil through immersion in a BiN3O9 solution. Experimental techniques including kelvin probe force microscopy (KPFM) and density functional theory (DFT) calculations were employed to analyze the structural and electronic properties of the Li3Bi/Li2O layer. The findings demonstrate successful doping of Bi into the Li coating, forming Bi-Bi and Bi-O bonds. KPFM measurements reveal a higher work function of Li3Bi/Li2O, indicating its potential as an effective protective layer. DFT calculations further support this observation by revealing a greater adsorption energy of lithium on the Li3Bi/Li2O layer compared to the bulk material. Charge density analysis suggests that the adsorption of Li atoms onto the Li3Bi/Li2O layer induces a redistribution of charge, resulting in increased electron availability on the surface and preventing electrode-electrolyte contact. This study provides insights into the role of the Li3Bi/Li2O protective layer in inhibiting dendrite growth in lithium metal batteries. By mitigating dendrite formation, the protective layer holds promise for enhancing battery performance and longevity. These findings contribute to the development of strategies for improving the stability and reliability of lithium metal batteries, facilitating their wider adoption in energy storage applications.