Structures and Reactivities of N-Alkenyl-Substituted Anilides: The "Magic" Methyl Effect on Alkene.

Methyl substitution at the double bond of N-alkenyl anilides influences both the preferred conformation and the susceptibility to acidic hydrolysis. The R1-substituted amide favors the trans conformation, whereas amides substituted at R2 or R3 favor the cis conformation. Substitution at the R1 and R3 positions increases the ratio of the trans conformer. DFT study indicated that these conformational preferences can be explained in terms of substituent-induced torsion twisting of the N-alkenyl moiety relative to the amide plane. R1 substitution enhances the susceptibility to acidic hydrolysis, whereas R2 or R3 substitution increases the stability. The effect of the double bond on the conformational effect was showcased by contrasting the preferred conformation of R1-substituted anilide (trans) and hydrogenated N-isopropyl amide (cis).

Synthesis and Conformational Analysis of N-Aromatic Acetamides Bearing Thiophene: Effect of Intramolecular Chalcogen-Chalcogen Interaction on Amide Conformational Stability.

The conformations of aromatic amides bearing an N-(2-thienyl) or N-(3-thienyl) group were investigated in solution and in the crystal state. NMR spectral data indicate that the conformational preferences of these amides in solution are dependent not only on the relative π-electron densities of the N-aromatic moieties, but also on the three-dimensional relationship between carbonyl oxygen and the N-aromatic moieties. A comparison of the conformational preferences of N-(2-thienyl)amides and N-(3-thienyl)amides revealed that the Z-conformers of N-(2-thienyl)acetamides are stabilized by 1,5-type intramolecular S···O═C interactions between amide carbonyl and thiophene sulfur. The crystal structures of these compounds were similar to the solution structures. The stabilization energy due to 1,5-type intramolecular S···O═C interaction in N-aryl-N-(2-thienyl)acetamides and N-methyl-N-(2-thienyl)acetamide was estimated to be ca. 0.74 and 0.93 kcal/mol, respectively.

Structure and Additive-free Transamidation of Planar N-Cyano Amides.

Although transamidation of amides generally requires metals, additives, or harsh conditions, we present here a facile transamidation of N-cyano amides with various amines at ambient temperature without any additive. N-cyano amides preferred the trans conformation and have a reduced double bond character revealed by crystal analysis. The DFT study indicates that the transamidation reaction proceeds through the direct attack of amine on the amide carbonyl since the LUMO (or LUMO+1) is located at the carbonyl moiety.

Conformational Switch of Benzanilide Derivative Induced by Acid; Effect of Pentafluorobenzoyl Group.

Amide-based molecular switches had its limitation on structural diversities. In this work, we designed and synthesized a series of pentafluorobenzoyl-based benzanilide compounds. The conformational ratio of these compounds in solution was correlated linearly with Hammett's σp value of the substituent on the anilide ring, reflecting the repulsive interaction between the carbonyl group and the electron-rich aryl group. The addition of acid into the solution of 6, bearing pentafluorobenzoyl group, switched the stable amide conformation. In addition, the sizeable rotational barrier of 6 induced by the pentafluorobenzoyl moiety enabled us to monitor the conformational transition by means of 1H NMR spectroscopy.

Characterization of Push-Pull-Type Benzo[X]quinoline Derivatives (X = g or f): Environmentally Responsive Fluorescent Dyes with Multiple Functions.

Benzo[X]quinoline (X = g or f: BQX) derivatives bearing bis-trifluoromethyl and amine groups have been designed as push-pull-type fluorescent dyes. Through the synthesis of BQX derivatives from 2,7-diaminonaphthalene, linear-type (BQL) and angular-type (BQA) structural isomers were obtained. X-ray structures of single crystals from six given BQX derivatives revealed that the BQL and BQA series adopt planar- and bowl-shaped structures. In the fluorescence spectra, interestingly, the BQL series emitted in the near-infrared region over 700 nm in polar solvents. Based on the visible absorptions and base properties related to the amine moiety, the ammonia responsiveness was investigated using an ion-exchange reaction by the BQX-HCl salt. By exploiting the environmentally responsive fluorescence probe, cell imaging through confocal laser microscopy was conducted using HeLa and 3T3-L1 cells, emitting specific lipid droplets. The results indicate that BQX derivatives have multiple functions and may be applied in materials chemistry and biochemistry.

N-Ethynylation of Anilides Decreases the Double-Bond Character of Amide Bond while Retaining trans-Conformation and Planarity.

Activated amide bonds have been attracting intense attention; however, most of the studied moieties have twisted amide character. To add a new strategy to activate amide bonds while maintaining its planarity, we envisioned the introduction of an alkynyl group on the amide nitrogen to disrupt amide resonance by nN→Csp conjugation. In this context, the conformations and properties of N-ethynyl-substituted aromatic amides were investigated by DFT calculations, crystallography, and NMR spectroscopic analysis. In contrast to the cis conformational preference of N-ethyl- and vinyl-substituted acetanilides, N-ethynyl-substituted acetanilide favors the trans conformation in the crystal and in solution. It also has a decreased double bond character of the C(O)-N bond, without twisting of the amide. N-Ethynyl-substituted acetanilides undergo selective C(O)-N bond or N-C(sp) bond cleavage reactions and have potential applications as activated amides for coupling reactions or easily cleavable tethers.

Spontaneous and Direct Transformation of N,O-Diaryl Carbamates into N,N'-Diarylureas.

We have discovered a spontaneous reaction of N,O-diaryl carbamates to afford symmetrical N,N'-diarylureas. Optimization of the conditions indicated that N,N-dimethylformamide (DMF) was the best solvent and triethylamine (Et3N) was the best additive for this transformation. The reaction requires the presence of aryl groups on the nitrogen and oxygen atoms of carbamates. Substrates bearing an electron-donating methoxy group on either of the aryl groups reacted slowly under these conditions.

Synthesis of [3]rotaxanes that utilize the catalytic activity of a macrocyclic phenanthroline-Cu Complex: remarkable effect of the length of the axle precursor.

[3]Rotaxanes, which consist of one macrocyclic phenanthroline compound and two axle components, were prepared by the oxidative dimerization of an alkyne compound with bulky tris[4'-cyclohexyl-(1,1'-biphenyl)-4-yl]methyl blocking group. The catalytic activity of a macrocyclic phenanthroline-Cu complex was utilized to thread the two axle components inside the ring. The alkyne compound with chain of 15 or 20 methylene groups gave [3]rotaxanes in high yields, whereas the axle with a chain of six methylene groups afforded a [3]rotaxane in very poor yield. We also examined the effect of the ring size on the synthesis of [3]rotaxanes. [3]Rotaxanes were not isolated when a macrocyclic phenanthroline compound with a smaller ring size was used.

Acid-mediated ring-expansion reaction of N-aryl-2-vinylazetidines: synthesis and unanticipated reactivity of tetrahydrobenzazocines.

The aza-Clasen rearrangement of N-aryl-2-vinylazetidines has been explored. N-Aryl-2-vinylazetidines were transformed to corresponding tetrahydrobenzazocines in good yields. Unexpectedly, the tetrahydrobenzazocine was unstable and readily isomerized to vinyltetrahydroquinoline in the presence of acid. The mechanism of this ring contraction was studied in detail.

Ni-catalyzed [4+3+2] cycloaddition of ethyl cyclopropylideneacetate and dienynes: scope and mechanistic insights.

A detailed study of the Ni-catalyzed [4+3+2] cycloaddition reaction between ethyl cyclopropylideneacetate and dienynes has been conducted, resulting in the development of a new method for the synthesis of compounds containing nine-membered rings. We studied the reactivity of various dienynes, together with their substituent and conformational effects. The mechanism of the reaction was probed by examining the stoichiometric reactions of the Ni complexes and dienynes.

Synthesis of large [2]rotaxanes. The relationship between the size of the blocking group and the stability of the rotaxane.

[2]Rotaxanes with large macrocyclic phenanthrolines were prepared by the template method, and the stability of the rotaxanes was examined. Compared to the tris(biphenyl)methyl group, the tris(4-cyclohexylbiphenyl)methyl group was a larger blocking group, and the rate of the dissociation of the components decreased significantly when the thermal stability of a rotaxane with a 41-memebered ring was examined. We also succeeded in the synthesis of larger rotaxanes by the oxidative dimerization of alkynes with these bulky blocking groups, utilizing the catalytic activity of the macrocyclic phenanthroline-Cu complex.

[5 + 2] Cycloaddition reaction of 2-vinylaziridines and sulfonyl isocyanates. Synthesis of seven-membered cyclic ureas.

The [5 + 2] cycloaddition reaction of 2-vinylaziridines with sulfonyl isocyanates proceeded smoothly under mild conditions, and various cyclic ureas were isolated in high yields. The remarkable solvent effect on the reaction was observed, and the preferential formation of the seven-membered ring occurred when the reaction was carried out in CH(2)Cl(2). The scope and limitation were studied, and the mechanism of this reaction was discussed. This study provides a new and simple method for the synthesis of seven-membered cyclic ureas.

Preparation of shape-persistent macrocycles with a single pyridine unit by double cross-coupling reactions of aryl bromides and alkynes.

A double Sonogashira-type coupling reaction between aryl bromides and alkynes using a catalytic Pd/XPhos (2-dicyclohexylphosphino-2',4',6'-triisopropylbiphenyl) system was introduced as an efficient method for the synthesis of shape-persistent macrocycles (SPMs). This approach is advantageous in the synthesis of SPMs with a single pyridine unit.

Nickel-catalyzed [3 + 2 + 2] cycloaddition of ethyl cyclopropylideneacetate and heteroatom-substituted alkynes: application to selective three-component reaction with 1,3-diynes.

Heteroatom-substituted alkynes such as ynol ethers and ynamines turned out to be decent substrates for the Ni-catalyzed [3 + 2 + 2] cocyclization of ethyl cyclopropylideneacetate (1). The three-component cocyclization of 1, 1,3-diynes, and heteroatom-substituted alkynes also proceeded selectively. The study provided an efficient method for the synthesis of heteroatom-substituted cycloheptadiene and related compounds.

Synthesis of vinylcycloheptadienes by the nickel-catalyzed three-component [3 + 2 + 2] cocyclization. Application to the synthesis of polycyclic compounds.

The nickel-catalyzed [3 + 2 + 2] cycloaddition of ethyl cyclopropylideneacetate and conjugated enynes proceeded smoothly and divinylcycloheptadienes were isolated in high yields. The three-component cocyclization of ethyl cyclopropylideneacetate, conjugated enynes, and (trimethylsilyl)acetylene also proceeded in a highly selective manner to afford vinylcycloheptadienes, which were reacted with various dienophiles. This study provided a new, short-step synthesis of polycyclic compounds with cycloheptane skeleton.

Copper-catalyzed synthesis of esters from ketones. Alkyl group as a leaving group.

The conversion of ketones to esters has been achieved through the use of Cu catalyst and tetrabutylammonium nitrite. This reaction involves the activation of the less activated C-C bond, and the alkyl group is removed as a leaving group. Various isopropyl ketones are found to be good substrates for this reaction.

Redox-induced conformational alteration of n,n-diarylamides.

We constructed a novel molecular conformational alteration system with an N-aryl-N-phenylacetamide structure, in which the N-aryl group consists of a hydroquinone-p-quinone system as a redox-dependent aromatic trigger. The amide conformation depended on the oxidation state of the aryl group, and the two states (compounds 2 and 3) were reversibly converted to each other by redox reactions. Such compounds would be applied as useful structural units for external stimulus-responsive control on the shape and function of large molecules or supramolecules.

Absolute helical arrangement of sulfonamide in the crystal.

[reaction: see text] 1,2-Bis(N-benzenesulfonyl-N-methylamino)benzene (2), which has no fixed asymmetric element, was crystallized from ethyl acetate as chiral crystals belonging to space group P4(1)2(1)2 (No. 92) or P4(3)2(1)2 (No. 96). The array of molecules built by the CH-pi interaction along the c-axis forms an enantiomeric helical superstructure in each individual crystal. The absolute configurations of the chiral crystals of 2 were determined by X-ray crystal structure analysis using the Flack parameter method. The solid-state CD spectra of the chiral crystals in KBr were mirror images. The equilibrium between the two enantiomers in solution is fast during crystallization at ambient temperature, and the energy barrier (DeltaG()) is estimated to be 11.7 +/- 0.3 kcal/mol (233 K).

Amide conformational switching induced by protonation of aromatic substituent.

[reaction: see text] Introduction of an electron-withdrawing group on the aromatic ring of N-methylacetanilide decreased the ratio of the cis conformer, and the ratio correlates well with the Hammett sigma values of the substituents. These steric properties can be applied to achieve amide conformational switching by protonation at the aromatic substituent of 4-[bis(dimethylamino)]-N-methylacetanilide or N-[p-(dimethylamino)phenyl]-N-phenylacetamide.