RESUMEN
Directional transport of liquids is of great importance in energy saving, chemical/biomedical engineering, and microfluidics applications. Despite considerable progress in engineering different open surfaces to achieve liquid manipulation, the realization of diode-like liquid transport in enclosed spaces is still challenging. Here, a flexible diode microtube is presented for directional liquid transport within confined spaces using pulsed microfluidics. The microtubes exhibit sophisticated microstructures on the inner wall, replicated from a precisely controlled flow configuration in the microfluidic channel. Under the effect of asymmetric pinning and unbalanced Laplace pressure, such microtubes enable directional liquid transport in closed channels. More importantly, by integrating in situ flow lithography with the microfluidic system, segmented liquid diodes are fabricated as assembly units for the construction of fluidic-electronic circuits that perform logic operations. These results demonstrate the capacity of the present liquid-diode microtubes for flexible, directional, and programmable liquid transport. We believe that it can open an avenue for designing advanced fluidic circuit-based devices toward versatile practical applications.
RESUMEN
Hemorrhage remains a critical challenge in various medical settings, necessitating the development of advanced hemostatic materials. Hemostatic hydrogels have emerged as promising solutions to address uncontrolled bleeding due to their unique properties, including biocompatibility, tunable physical characteristics, and exceptional hemostatic capabilities. In this review, a comprehensive overview of the preparation and biomedical applications of hemostatic hydrogels is provided. Particularly, hemostatic hydrogels with various materials and forms are introduced. Additionally, the applications of hemostatic hydrogels in trauma management, surgical procedures, wound care, etc. are summarized. Finally, the limitations and future prospects of hemostatic hydrogels are discussed and evaluated. This review aims to highlight the biomedical applications of hydrogels in hemorrhage management and offer insights into the development of clinically relevant hemostatic materials.
Asunto(s)
Hemostáticos , Hidrogeles , Hidrogeles/química , Hemostáticos/química , Humanos , Animales , Hemostasis/efectos de los fármacos , Hemorragia , Materiales Biocompatibles/químicaRESUMEN
Liquid metals have attracted a lot of attention as self-healing materials in many fields. However, their applications in secondary batteries are challenged by electrode failure and side reactions due to the drastic volume changes during the "liquid-solid-liquid" transition. Herein, a simple encapsulated, mass-producible method is developed to prepare room-temperature liquid metal-infilled microcapsules (LMMs) with highly conductive carbon shells as anodes for lithium-ion batteries. Due to the reasonably designed voids in the microcapsule, the liquid metal particles (LMPs) can expand freely without damaging the electrode structure. The LMMs-based anodes exhibit superior capacity of rete-performance and ultra-long cycling stability remaining 413 mAh g-1 after 5000 cycles at 5.0 A g-1. Ex situ X-ray powder diffraction (XRD) patterns and electrochemical impedance spectroscopy (EIS) reveal that the LMMs anode displays a stable alloying/de-alloying mechanism. DFT calculations validate the electronic structure and stability of the room-temperature LMMs system. These findings will bring some new opportunities to develop high-performance battery systems.
RESUMEN
BACKGROUND: In contemporary times, increased prevalence of Helicobacter pylori (H. pylori) infection and elevated dyslipidemia levels present substantial public health challenges. However, the relationship between H. pylori and dyslipidemia remains inconclusive. No studies have yet conducted a population-based classification to investigate the impact of H. pylori infection on dyslipidemia in individuals with diabetes. METHODS: A retrospective cohort study was carried out on a total of 60,535 individuals who underwent health check-ups at the Health Examination Center in Taizhou Hospital from 2017 to 2022. Physical measurements, hematological markers and detection of H. pylori were gathered from all patients. The study population was further stratified into diabetic and non-diabetic groups for analysis. RESULTS: H. pylori infection was found to be an autonomous risk factor for dyslipidemia based on the results of multivariate logistic regression analysis (OR = 1.13, 95% CI: 1.03-1.24). However, no notable effect on dyslipidemia in the non-diabetic group was observed. Furthermore, at the follow-up, the group with persistent negative showed a significantly lower incidence ratio of dyslipidemia compared to the group with persistent infection (P = 0.006). The persistent negative group exhibited a significantly higher rate of improvement in dyslipidemia compared to the new infection group (P = 0.038). CONCLUSIONS: In the diabetic population, the presence of H. pylori infection heightens the propensity for developing dyslipidemia. Therefore, the implementation of efficient eradication strategies for H. pylori infection could potentially lead to a decrease in the occurrence of dyslipidemia among individuals with diabetes.
Asunto(s)
Dislipidemias , Infecciones por Helicobacter , Helicobacter pylori , Humanos , Estudios Retrospectivos , Infecciones por Helicobacter/complicaciones , Infecciones por Helicobacter/epidemiología , Dislipidemias/epidemiología , Dislipidemias/complicaciones , Masculino , Femenino , Persona de Mediana Edad , Estudios Transversales , China/epidemiología , Factores de Riesgo , Adulto , Diabetes Mellitus/epidemiología , Anciano , Prevalencia , Incidencia , Pueblos del Este de AsiaRESUMEN
Chiral quasi-bound states in the continuum (QBIC) offer novel mechanisms to achieve intrinsic chiroptical responses. However, current studies on chiral QBIC metasurfaces are restricted to the excitation of intrinsic chirality and fail to dynamically control its circular dichroism (CD) responses. Herein, we construct a phase-change metasurface based on paired Ge2Sb2Te5 (GST) bars to demonstrate the dynamic control of the CD responses of chiral QBIC. The modified coupled mode theory (CMT) is proposed to evaluate the intrinsic chirality, and the predicted results are in good agreement with the finite-difference time-domain (FDTD) results. The maximal intrinsic chirality is associated with the spin-selected dipole mode, i.e., the coupled magnetic dipole (MD) QBIC mode for the left-handed circularly polarized (LCP) light and the decoupled electric dipole (ED) QBIC mode for the right-handed circularly polarized (RCP) light. By varying the volume fraction of GST, the location of chiral BIC can be tuned linearly, and the corresponding chiral response can be switched.
RESUMEN
Confronted with unmanned surface vessel (USV) operations where GNSS signals are unavailable due to obscuration and other factors, a LiDAR SLAM-assisted fusion positioning method for USVs is proposed to combine GNSS/INS positioning with LiDAR-SLAM. When the USV works in wide-open water, the carrier phase differential GNSS/INS loosely coupled integration strategy is applied to fuse and calibrate the positioning data, and the positioning information of the USV is obtained through the coordinate conversion process. The system uses a dynamic switching strategy to enter to LiDAR-SLAM positioning when GNSS signals are not available, compensating the LiDAR data with precise angle information to ensure accurate and stable positioning. The experiments show that compared with the traditional Kalman filter and adaptive Kalman filter fusion algorithms, the positioning error is reduced by 55.4% and 43.5%. The velocity error is also limited by 78.2% and 57.9%. The standard deviation and the root mean square error are stable within 0.1 m, indicating that our method has better data stability, while the probability of positioning anomaly is effectively controlled.
RESUMEN
Microfibers have demonstrated significant application values in a large number of areas. Current efforts focus on developing new technologies to prepare microfibers with controllable morphological and structural features to enhance their functions. Here, a piezoelectric microfluidic platform is presented for consecutive spinning of functional microfibers with programmable spindle-knots. In this platform, a jet of a pregel-solution flowing in the channel can be subjected to a programmable piezoelectric signal and vibrates synchronously. Following a rapid polymerization of the wavy jet, microfibers with corresponding morphologies can be generated, including uniform, gradient, and symmetrical knots. Such a unique knot structure contributes to a water-collection mechanism. Thus, it has been observed that microfibers with programmed knots enable even more flexible droplet handling and active water transport. In addition, by constructing higher-order knot fiber networks, practical applications including spray reaction, lab-on-a-chip vapor detection, etc., can also be demonstrated. it is believed that this platform opens a new avenue for fiber spinning, and the programmable microfibers would be highly applicable in chemical, biomedical, and environmental areas.
Asunto(s)
Dispositivos Laboratorio en un Chip , Microfluídica , Agua/químicaRESUMEN
Flexible control of light absorption within the lithography-free nanostructure is crucial for many polarization-dependent optical devices. Herein, we demonstrated that the lithography-free tunable absorber (LTA) can be realized by using two one-dimensional (1D) photonic crystals (PCs) consisting of an α-MoO3 layer at visible region. The two 1D PCs have different bulk band properties, and the topological interface state-induced light absorption enhancement of α-MoO3 can be realized as the α-MoO3 thin film is inserted at the interface between the two 1D PCs. The resonant cavity model is proposed to evaluate the anisotropic absorption performances of the LTA, and the results are in good agreement with those of the transfer matrix method (TMM). The absorption efficiency of the LTA can be tailored by the number of the period of the two PCs, and the larger peak absorption is the direct consequence of the larger field enhancement factor (FEF) within the α-MoO3 layer. In addition, near-perfect absorption can be achieved as the LTA is operated at the over-coupled resonance. By varying the polarization angle, the absorption channels can be selected and the reflection response can be effectively modulated due to the excellent in-plane anisotropy of α-MoO3.
RESUMEN
OBJECTIVE: This study aimed to investigate specific protein expression of injured intestinal mucosa induced by diclofenac, and explore the protective effects of teprenone on it. METHODS: Intestinal damage of Sprague Dawley male rats was gradually induced by the intragastric administration of diclofenac. After the last drug administration, the intestinal mucosa was taken off with an interval of 24 h, subsequently, its general histological injury and ultrastructure were observed and analysed by a transmission electron microscope. The expression levels of PAR1 and PAR2 protein were detected by immunohistochemistry and real-time polymerase chain reaction (PCR). RESULTS: The Reuter and Chiu scores of small intestinal damage were 5.63 ± 1.30 and 4.25 ± 0.70 respectively in the model group, which could be protected by teprenone (100 mg/kgâ day) with the degree of 55.7% and 44%. Optical microscopy and transmission electron microscope showed that intestinal mucosa and ultrastructure were severely damaged. Distributed in the cytoplasm or aligned with the nucleus, the expression of PAR1 and PAR2 was significantly upregulated after the administration of diclofenac, while it was relieved after the treatment of teprenone. CONCLUSION: Our study presents a new view that teprenone might protect NSAIDs-induced (diclofenac) intestinal injury via suppressing the expression of PAR1 and PAR2.
Asunto(s)
Traumatismos Abdominales/tratamiento farmacológico , Diterpenos/farmacología , Intestino Delgado/efectos de los fármacos , Proteínas Serina-Treonina Quinasas/genética , Receptor PAR-2/genética , Traumatismos Abdominales/inducido químicamente , Traumatismos Abdominales/genética , Traumatismos Abdominales/patología , Animales , Antiinflamatorios no Esteroideos/efectos adversos , Diclofenaco/efectos adversos , Modelos Animales de Enfermedad , Regulación de la Expresión Génica/efectos de los fármacos , Humanos , Mucosa Intestinal/diagnóstico por imagen , Mucosa Intestinal/efectos de los fármacos , Mucosa Intestinal/patología , Intestino Delgado/diagnóstico por imagen , Intestino Delgado/lesiones , Intestino Delgado/patología , Microscopía Electrónica de Transmisión , Ratas , Ratas Sprague-DawleyRESUMEN
Self-injurious behavior (SIB) is commonly observed in patients with neuropsychiatric disorders, as well as in nonclinical populations with stress-related mental-health problems. However, the exact circuitry mechanisms underlying SIB have remained poorly understood. Here, with bilateral injection of muscimol into the entopeduncular nucleus (EP), we established a rat model of SIB. Following the muscimol injection, the male rats exhibited in a dose-dependent manner stereotypic self-biting behavior that lasted for hours and often resulted in wounds of various severities. The SIB was associated with an elevated level of serum corticosterone and could be exacerbated by enhancing the corticosterone signaling and, conversely, alleviated by inhibiting the corticosterone signaling. Activity mapping using c-fos immunostaining, combined with connectivity mapping using herpes simplex virus-based anterograde tracing from the EP and pseudorabies virus-based retrograde tracing from the masseter muscle, revealed the potential involvement of many brain areas in SIB. In particular, the lateral habenula (LHb) and the ventral tegmental area (VTA), the two connected brain areas involved in stress response and reward processing, showed a significant increase in neuronal activation during SIB. Furthermore, suppressing the LHb activity or modulating the GABAergic transmission in the VTA could significantly reduce the occurrence of SIB. These results demonstrate the importance of stress hormone signaling and the LHb-VTA circuit in modulating SIB resulting from EP malfunction, and suggest potential targets for therapeutic intervention of SIB and related disorders.SIGNIFICANCE STATEMENT Self-injurious behavior (SIB) occurs in â¼4% of the general population, with substantially higher occurrence among adolescents and patients of neuropsychiatric disorders. Stress has been linked to the occurrence of SIB, yet the underlying mechanisms have remained unclear. Using a rat model of SIB induced by disruption of activity in the entopeduncular nucleus (EP), we found that the behavior is regulated by stress and linked to corticosterone signaling. Viral tracing and c-fos immunostaining revealed the involvement of various subcortical areas, especially the EP-lateral habenula (LHb)-ventral tegmental area (VTA) circuit, in SIB. Furthermore, regulating activity in the LHb or the VTA alleviates SIB. These results may have implications in the development of new strategies for treating SIB.
Asunto(s)
Corticosterona/metabolismo , Habénula/metabolismo , Vías Nerviosas/metabolismo , Conducta Autodestructiva/metabolismo , Área Tegmental Ventral/metabolismo , Animales , Modelos Animales de Enfermedad , Habénula/fisiopatología , Masculino , Vías Nerviosas/fisiopatología , Ratas , Ratas Sprague-Dawley , Conducta Autodestructiva/fisiopatología , Transducción de Señal/fisiología , Área Tegmental Ventral/fisiopatologíaRESUMEN
Aim: To reduce the contamination arising from abuse of commercial pesticide formulations, the coaxial electrospray (CES) method was used for one-step microencapsulation and spraying of pesticides. Methods: After optimisation of process parameters, polymeric microcapsules with different structures were fabricated as the carriers of azoxystrobin (AZS). For the resultant microcapsules, the sustained pesticide release was verified in vitro and the adhesion properties were investigated through a normalised rinsing test. Results: The maximum encapsulation efficiency of the fabricated AZS-loaded microcapsules was 99.14%. Compared to commercial AZS aqueous suspension, the microcapsules fabricated by the CES method exhibited improved sustained release performance of AZS, which could be readily controlled by adjusting the shell thicknesses. Moreover, highly enhanced adhesion performance was observed for the AZS-loaded microcapsules directly sprayed in CES process. Conclusions: The CES process is promising to be applied as a one-step microencapsulation and spraying technology for improving pesticide utilisation and reducing environmental pollution.
Asunto(s)
Preparaciones de Acción Retardada/química , Plaguicidas/química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/química , Pirimidinas/química , Estrobilurinas/química , Adhesividad , Cápsulas/química , Composición de Medicamentos/instrumentación , Diseño de Equipo , Tamaño de la PartículaRESUMEN
Apoptosis is an important process to maintain cellular homeostasis. Deregulated apoptosis has linked to a number of diseases, such as inflammatory diseases, neurodegenerative disorder, and cancers. A major signaling complex in the death receptor signaling pathway leading to apoptosis is death-induced signaling complex (DISC), which is regulated mainly by death effector domain (DED)-containing proteins. There are seven DED-containing proteins in human, including FADD, c-FLIP, caspase-8, caspase-10, DEDD, DEDD2, and PEA-15. The main players in DISC formation employ tandem DEDs for regulating signaling complex formation. The regulatory mechanism of signaling complex formation is important and yet remains unclear. Interestingly, three caspase recruitment domain (CARD)-containing members, which belong to the same DD superfamily as DED-containing proteins, also contains similar tandem CARDs. Recent structural studies have shown that tandem CARDs are essential for the formation of a helical signaling complex. This review summarizes recent structural studies on DED-containing proteins and especially discusses the studies on tandem DEDs and tandem CARDs, which suggest new mechanisms of signaling complex assembly.
Asunto(s)
Apoptosis , Proteínas Adaptadoras de Señalización CARD/fisiología , Proteínas Adaptadoras de Señalización del Receptor del Dominio de Muerte/fisiología , Proteínas Adaptadoras de Señalización CARD/química , Proteínas Adaptadoras de Señalización del Receptor del Dominio de Muerte/química , Humanos , Modelos Moleculares , Complejos Multiproteicos/química , Complejos Multiproteicos/fisiología , Dominios y Motivos de Interacción de Proteínas , Multimerización de Proteína , Estructura Cuaternaria de Proteína , Transducción de Señal , Homología Estructural de ProteínaRESUMEN
CARD subfamily is the second largest subfamily in the DD superfamily that plays important roles in regulating various signaling pathways, including but not limited to NF-kB activation signaling, apoptosis signaling and inflammatory signaling. The CARD subfamily contains 33 human CARD-containing proteins, regulating the assembly of many signaling complexes, including apoptosome, inflammsome, nodosome, the CBM complex, PIDDosome, the TRAF2 complex, and the MAVS signalosome, by homotypic CARD-CARD interactions. The mechanism of how CARDs find the right binding partner to form a specific complex remains unclear. This review uses different classification schemes to update the classification of CARD-containing proteins. Combining the classification based on domain structures, functions, associated signaling complexes, and roles would help better understand the structural and function diversity of CARD-containing proteins. This review also summarizes recent structural studies on CARDs. Especially, the CARD-containing complexes can be divided into the homodimeric, heterodimeric, oligomeric, filamentous CARD complexes and the CARD-ubiquitin complex. This review will give an overview of the versatile roles of CARDs in regulating signaling transduction, as well as the therapeutic drugs targeting CARD-containing proteins.
Asunto(s)
Apoptosis , Proteínas Adaptadoras de Señalización CARD/fisiología , FN-kappa B/metabolismo , Humanos , Inflamación/metabolismo , Modelos Moleculares , Unión Proteica , Dominios y Motivos de Interacción de Proteínas , Multimerización de Proteína , Estructura Secundaria de Proteína , Receptores de Muerte Celular/fisiología , Transducción de SeñalRESUMEN
In this study, an existing ternary membrane system based on nonsolvent-induced phase separation (NIPS) with a phase-field model was optimized. To study and analyze the effects of different additives on the formation of the skin layer and the effects of the three solvents on membrane characterization under the same conditions, two-dimensional simulations of the relevant parameters of a poly(vinylidene fluoride) (PVDF) membrane system were performed. The specific application of quaternary substances in ternary membrane systems was elaborated by determining the cohesive energy density between the additives and solvents, followed by the interaction parameters χ under the joint effect of the two. The results showed that the PVDF microporous membrane formed a dense surface layer at the mass transfer exchange interface, and with an increase in the poly(ethylene glycol) (PEG) concentration, the phase separation of the skin layer was predominantly transformed from liquid-solid partitioning to liquid-liquid partitioning; the number of membrane pores increased with increasing poly(vinylpyrrolidone) (PVP) concentration. The N,N-dimethylacetamide (DMAc) solvent system had the most stable thermodynamic properties; the dimethyl sulfoxide (DMSO) solvent system had mostly large pores running through the membrane and exhibited a porous structure. Related experiments also validated the model. Therefore, this model can be applied to other PVDF ternary membrane systems to better understand the structural development of microporous PVDF membranes under different conditions.
RESUMEN
Fas-associated protein with death domain (FADD), procaspase-8, and cellular FLICE-inhibitory proteins (cFLIP) assemble through death-effector domains (DEDs), directing death receptor signaling towards cell survival or apoptosis. Understanding their three-dimensional regulatory mechanism has been limited by the absence of atomic coordinates for their ternary DED complex. By employing X-ray crystallography and cryogenic electron microscopy (cryo-EM), we present the atomic coordinates of human FADD-procaspase-8-cFLIP complexes, revealing structural insights into these critical interactions. These structures illustrate how FADD and cFLIP orchestrate the assembly of caspase-8-containing complexes and offer mechanistic explanations for their role in promoting or inhibiting apoptotic and necroptotic signaling. A helical procaspase-8-cFLIP hetero-double layer in the complex appears to promote limited caspase-8 activation for cell survival. Our structure-guided mutagenesis supports the role of the triple-FADD complex in caspase-8 activation and in regulating receptor-interacting protein kinase 1 (RIPK1). These results propose a unified mechanism for DED assembly and procaspase-8 activation in the regulation of apoptotic and necroptotic signaling across various cellular pathways involved in development, innate immunity, and disease.
Asunto(s)
Apoptosis , Proteína Reguladora de Apoptosis Similar a CASP8 y FADD , Caspasa 8 , Proteína de Dominio de Muerte Asociada a Fas , Humanos , Proteína Reguladora de Apoptosis Similar a CASP8 y FADD/metabolismo , Proteína Reguladora de Apoptosis Similar a CASP8 y FADD/genética , Proteína Reguladora de Apoptosis Similar a CASP8 y FADD/química , Caspasa 8/metabolismo , Microscopía por Crioelectrón , Cristalografía por Rayos X , Proteína de Dominio de Muerte Asociada a Fas/metabolismo , Proteína de Dominio de Muerte Asociada a Fas/genética , Células HEK293 , Modelos Moleculares , Unión Proteica , Dominios Proteicos , Proteína Serina-Treonina Quinasas de Interacción con Receptores/metabolismo , Proteína Serina-Treonina Quinasas de Interacción con Receptores/genética , Transducción de SeñalRESUMEN
Background: Helicobacter pylori (H. pylori) has increasingly been shown to be related to extragastric diseases. Glycated hemoglobin A1c (HbA1c), an indicator of glycemic control, is closely linked to the event of diabetes. The purpose of this research was to analyze the association between H. pylori and HbA1c through a cohort study. Methods: The population who underwent multiple physical checkups in the physical examination center of Taizhou Hospital was included. All of them underwent urea breath test, serological examination and physical parameter measurement. Multiple regression was used for analyzing the influencing factors of HbA1c. In addition, the result of HbA1c on H. pylori infection was studied by restricted cubic spline (RCS) analysis. The triglyceride glucose (TyG) index represents the level of insulin resistance (IR) in the population. The population was classified on the basis of primary and last H. pylori infection, therefore, the variations of HbA1c and TyG index among totally different teams were investigated. Results: Multiple regression demonstrated that H. pylori was an influential factor in HbA1c. RCS analysis showed a nonlinear relationship between HbA1c and H. pylori infection. When HbA1c>5.7%, the chance of H. pylori infection was considerably enlarged. Additionally, long-term H. pylori infection increased HbA1c levels, while HbA1c levels decreased after H. pylori eradication. Similarly, long-term H. pylori infection also increased the TyG index. Conclusion: Prediabetes increases the danger of H. pylori infection, long-term H. pylori infection increases HbA1c and IR levels, and wipeout of H. pylori could have a positive impact for glycemic control in the population.
Asunto(s)
Diabetes Mellitus , Infecciones por Helicobacter , Helicobacter pylori , Resistencia a la Insulina , Humanos , Hemoglobina Glucada , Estudios de Cohortes , Glucemia , Infecciones por Helicobacter/diagnóstico , TriglicéridosRESUMEN
Objective: Infection with Helicobacter pylori (H. pylori) may increase atherosclerosis, which can lead to carotid plaque formation. Our study examined the relationship between H. pylori infection and carotid plaque formation, and its underlying mechanisms. Methods: A total of 36,470 people who underwent physical examination in Taizhou Hospital Health Examination Center from June 2017 to June 2022 were included in this study. All people participated in the urease test, neck ultrasound, blood pressure detection, anthropometric measurement and biochemical laboratory examination. In addition, the GSE27411 and GSE28829 datasets in the Gene Expression Omnibus (GEO) database were used to analyze the mechanism of H. pylori infection and atherosclerosis progression. Results: H. pylori infection, sex, age, blood lipids, blood pressure, fasting blood glucose, glycated hemoglobin and body mass index were risk factors for carotid plaque formation. An independent risk factor was still evident in the multivariate logistic regression analysis, indicating H. pylori infection. Furthermore, after weighted gene coexpression network analysis (WGCNA), we discovered 555 genes linked to both H. pylori infection and the advancement of atherosclerosis. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analyses revealed a strong correlation between these genes and immunity, infection, and immune disorders. SsGSEA analysis showed that H. pylori infection and atherosclerosis included changes in the immune microenvironment. Finally, three genes MS4A6A, ADAMDEC1 and AQP9 were identified to be involved in the formation of atherosclerosis after H. pylori infection. Conclusion: Our research affirms that H. pylori is a unique contributor to the formation of carotid plaque, examines the immune microenvironment associated with H. pylori infection and advanced carotid atherosclerosis, and offers fresh perspectives on how H. pylori infection leads to atherosclerosis.
RESUMEN
Nonspherical particles have attracted increasing interest because of their shape anisotropy. However, the current methods to prepare anisotropic particles suffer from complex generation processes and limited shape diversity. Here, we develop a piezoelectric microfluidic system to generate complex flow configurations and fabricate jellyfish-like microparticles. In this delicate system, the piezoelectric vibration could evolve a jellyfish-like flow configuration in the microchannel and the in situ photopolymerization could instantly capture the flow architecture. The sizes and morphologies of the particles are precisely controlled by tuning the piezoelectric and microfluidic parameters. Furthermore, multi-compartmental microparticles with a dual-layer structure are achieved by modifying the injecting channel geometry. Moreover, such unique a shape endows the particles with flexible motion ability especially when stimuli-responsive materials are incorporated. On the basis of that, we demonstrate the capability of the jellyfish-like microparticles in highly efficient adsorption of organic pollutants under external control. Thus, it is believed that such jellyfish-like microparticles are highly versatile in potential applications and the piezoelectric-integrated microfluidic strategy could open an avenue for the creation of such anisotropic particles.
RESUMEN
We used the phase-field model of the existing Nonsolvent Induced Phase Separation (NIPS) method to add the variable of temperature in simulating the changes in the process of membrane formation. The polyvinylidene fluoride (PVDF) membrane system was applied to examine the influence of coagulation bath temperature change on the skin-sublayer of the membrane structure, thereby elucidating the development process of membrane structure under different conditions and shedding light on the most suitable coagulation bath temperature ranges. It was found that as coagulation bath temperature increased, the number of interface pores in the outer skin layer decreased, but the size increased. As a result, it changed from the crack shape to round-hole shape, thus making the pore structure looser. In the sublayer, the mesh support structure was increased, which enhanced the mechanical strength of the membrane. Relevant experiments also verify the effectiveness of the model.
RESUMEN
Optical anisotropy of α-MoO3 in its reststrahlen (RS) bands provides exciting opportunities for constructing the polarization-dependent devices. However, achieving broadband anisotropic absorptions through the same α-MoO3 arrays is still challenging. In this study, we demonstrate that selective broadband absorption can be achieved by using the same α-MoO3 square pyramid arrays (SPAs). For both the x and y polarizations, the absorption responses of the α-MoO3 SPAs calculated by using the effective medium theory (EMT) agreed well with those of the FDTD, indicating the excellent selective broadband absorption of the α-MoO3 SPAs are associated with the resonant hyperbolic phonon polaritons (HPhPs) modes assisted by the anisotropic gradient antireflection (AR) effect of the structure. The near-field distribution of the absorption wavelengths of the α-MoO3 SPAs shows that the magnetic-field enhancement of the lager absorption wavelength tends to shift to the bottom of the α-MoO3 SPAs due to the lateral Fabry-Pérot (F-P) resonance, and the electric-field distribution exhibits the ray-like light propagation trails due to the resonance nature of the HPhPs modes. In addition, broadband absorption of the α-MoO3 SPAs can be maintained if the width of the bottom edge of the α-MoO3 pyramid is large than 0.8 µm, and excellent anisotropic absorption performances are almost immune to the variations of the thickness of the spacer and the height of the α-MoO3 pyramid.