RESUMEN
A photo- and electro-thermal film can convert sunlight and electricity into heat to solve icing problems. Combination of them provides an efficient strategy for all-day anti-/de-icing. However, only opaque surfaces have been reported, due to the mutual exclusiveness between photon absorption and transmission. Herein, a highly transparent and scalable solution-processed photo-electro-thermal film is reported, which exhibits an ultra-broadband selective spectrum to separate the visible light from sunlight and a countertrend suppress of emission in longer wavelength. It absorbs ≈ 85% of invisible sunlight (ultraviolet and near-infrared) for light-heat conversion, meanwhile maintains luminous transmittance > 70%. The reflection of mid-infrared leads to low emissivity (0.41), which further preserves heat on the surface for anti-/de-icing purpose. This ultra-broadband selectivity enables temperature elevation > 40 °C under 1-sun illumination and the mutual support between photo-thermal and electro-thermal effects contributes to > 50% saving of electrical consumption under weak solar exposure (0.4-sun) for maintaining unfrozen surfaces at -35 °C environment. The reverberation from photo-electro-thermal and super-hydrophobic effects illustrates a lubricating removal of grown ice in short time (< 120 s). The self-cleaning ability and the durability under mechanical, electrical, optical, and thermal stresses render the film stable for long-term usage in all-day anti-/de-icing applications.
RESUMEN
α-Triaryl amines have been used as pharmaceuticals and pharmaceutical intermediates for antifungal and anticancer applications. Current methods to synthesize such compounds require at least two steps, and no direct amination of tertiary alcohols has been reported. Herein, we disclose efficient catalytic conditions for the direct amination of α-triaryl alcohols to access α-triaryl amines. VO(OiPr)3, a commercially available reagent, has been identified as an effective catalyst for the direct amination of several α-triaryl alcohols. This process is scalable, as demonstrated by a gram-scale synthesis, and the reaction still works at as low as a 0.01 mol % catalyst loading with the turnover number reaching 3900. Moreover, commercial pharmaceuticals including clotrimazole and flutrimazole have been successfully prepared rapidly and efficiently using this newly developed method.
RESUMEN
A structural mechanics and energy storage difunctional supercapacitor based on a geopolymer membrane injected with a 0.5 M Na2SO4 electrolyte and a pseudocapacitive electrode Mn7O13 is designed and assembled. The geopolymer membrane is prepared as a structural electrolyte with metakaolin and alkaline activator solution. The wide channels in the geopolymer matrix provide paths for ion movement. The Mn7O13 electrode is prepared by different hydrothermal treatments at different temperatures and times, and assembled with activated carbon and a geopolymer with different moduli to form a difunctional supercapacitor. The results show that the electrode sample annealed at 300 °C for 45 min after hydrothermal treatment at 160 °C for 24 h exhibits the best comprehensive performance. The specific capacitance of the electrode is 175.5 F g-1 (2392.6 F m-2) at 1 A g-1, and the specific capacitance of the difunctional structure supercapacitor assembled with a geopolymer with a modulus of 1.2 and cured for 28 days is 144.12 F g-1 (1960.0F m-2) at 1 A g-1 under 15 MPa.
RESUMEN
Oceans contain many freshwater resources and metal elements that people need, so the rational development of marine resources can solve the two major problems of shortage of freshwater resources and metal elements for people. To solve these two challenges, a system was designed to obtain freshwater resources and metallic elements simultaneously. An ion enrichment module was added to the conventional flow capacitor deionization system to collect metal elements while the seawater was deionized. A flowing electrode allows the metal elements to enter the flowing electrode through the desalination ability. It transports the metal elements to the enrichment module through the fluidity of the fluid while reducing the ion concentration at the flowing electrode, thus reducing the effect caused by the rejection of the same ion and collecting and enriching the metal elements. We purchased activated carbon to test the feasibility of the system with different mass fractions of activated carbon suspensions. The results showed that the elemental enrichment capacity of the system increased from 12.291 to 14.795 mg, and the enrichment rate increased from 13.536 to 16.294 mg cm-2 h-1 as the mass fraction of activated carbon increased. Thus, the system accomplished the goals of desalination and metal collection simultaneously.
RESUMEN
PURPOSE: To determine whether internal limiting membrane peeling damages retinal function in patients with an idiopathic macular hole. METHODS: Retrospective case series. Forty-five eyes of 45 idiopathic macular hole patients who underwent vitrectomy with internal limiting membrane peeling with a minimum follow-up of 6 months. Each patient received a complete ophthalmological examination. The eyes were examined by microperimetry MP-3 in the central 20° visual field and optical coherence tomography angiography in the central 6 × 6 mm area. RESULTS: Six months after the surgery, macular hole closed in each patient. Retinal sensitivity decreased significantly in the perifoveal temporal ETDRS sector (from 24.97 ± 2.67-19.98 ± 5.68 dB, P = 0.001) but not in the other sectors. Six patients (13%) developed 24 scotomas, 62.5% presented in the perifoveal temporal sector. Anatomically, bumps in the outer nuclear layer were discovered concurrent with inner retinal dimples on B-scan images, predominantly (76.8%) in the perifoveal temporal sector, which have not been previously reported. The incidence of outer nuclear layer bumps was significantly higher in patients with scotomas than in those without (83% vs. 18%, P = 0.014). CONCLUSION: Internal limiting membrane peeling induced functional changes specifically in the perifoveal temporal macula. Distortion in the retinal layers is proposed to underly scotomas pathogenesis.
Asunto(s)
Membrana Epirretinal , Perforaciones de la Retina , Humanos , Perforaciones de la Retina/diagnóstico , Perforaciones de la Retina/etiología , Perforaciones de la Retina/cirugía , Escotoma/diagnóstico , Escotoma/etiología , Escotoma/patología , Estudios Retrospectivos , Retina/patología , Vitrectomía/efectos adversos , Vitrectomía/métodos , Tomografía de Coherencia Óptica/métodos , Membrana Basal/patología , Membrana Epirretinal/diagnóstico , Membrana Epirretinal/cirugía , Membrana Epirretinal/patologíaRESUMEN
Memory is an essential element for a computer to process information, which is integrated by logical circuits. Like electronic computing, thermal information can also be stored and read out by a thermal memory. Here, we show that a phase-changing polymer with hysteretic thermal transport properties can be experimentally processed into thermal memories at room temperature. We used a temperature-responsive and reversible polymer synthesized with melamine (M) and 6,7-dimethoxy-2,4[1H,3H]-quinazolinedione (Q) as a model system to demonstrate the manipulation of thermal transport at a molecular level. Fourier transform infrared spectroscopy and differential scanning calorimetry measurements indicate that this hysteretic behavior is based on the interaction of hydrogen bonds at high (317 K) and low (297 K) temperatures. This work demonstrates a controllable phonon transport process through the manipulation of hydrogen bonds, and thus it has potential applications in thermal memories.
RESUMEN
Retinal dopamine is believed to be involved in the development of myopia, which is projected to affect almost half of the world population's visual health by 2050. Direct visualization of dopamine in the retina with high spatial precision is essential for understanding the biochemical mechanism during the development of myopia. However, there are very few approaches for the direct detection of dopamine in the visual system, particularly in the retina. Here, we report surface-enhanced Raman scattering (SERS)-based dopamine imaging in cells and retinal tissues with high spatial precision. The surface of gold nanoparticles is modified with N-butylboronic acid-2-mercaptoethylamine and 3,3'-dithiodipropionic acid di(N-hydroxysuccinimide ester), which shows excellent specific reaction with dopamine. The existence of dopamine triggers the aggregation of gold nanoparticles that subsequently form plasmonic hot spots to dramatically increase the Raman signal of dopamine. The as-synthesized SERS nanoprobes have been evaluated and applied for dopamine imaging in living cells and retinal tissues in form-deprivation (FD) myopia guinea pigs, followed by further investigation on localized dopamine levels in the FD-treated mice. The results suggest a declined dopamine level in mice retina after 2-week FD treatment, which is associated with the development of myopia. Our approach will greatly contribute to better understanding the localized dopamine level associated with myopia and its possible treatments. Furthermore, the imaging platform can be utilized to sensing other important small molecules within the biological samples.
Asunto(s)
Oro , Nanopartículas del Metal , Animales , Dopamina , Cobayas , Ratones , Retina/diagnóstico por imagen , Espectrometría RamanRESUMEN
Microencapsulated phase-change material (ME-PCM) employing octadecane as a core material has been practiced for thermal-energy-storage (TES) applications in buildings. However, octadecane as a hydrocarbon-based PCM is flammable. Herein, silica-shelled microcapsules (SiO2-MCs) and poly(urea-formaldehyde)-shelled microcapsules (PUF-MCs) were successfully prepared, loaded with octadecane/tributyl phosphate (TBP) as hybrid core materials, which not only exhibited good TES properties but also high-effective flame retardancy. SiO2-MC (ΔHm = 124.6 J g-1 and ΔHc = 124.1 J g-1) showed weaker TES capacity than PUF-MC (ΔHm = 186.8 J g-1, ΔHc = 188.5 J g-1) but better flame retardancy with a lower peak heat-release rate (HRRpeak) of 460.9 W g-1 (556.9 W g-1 for PUF-MCs). As compared with octadecane (38.7 kJ g-1), the reduction in total heat release (THR) for SiO2-MC was up to 22% (30.1 kJ g-1) with combustion time shortened by 1/6. SiO2-MC had a typical diameter of 150-210 µm, shell thickness of â¼6.5 µm, and a core fraction of 84 wt %. SiO2-MC showed better thermal stability with a higher initial evaporation/pyrolysis temperature than PUF-MC. The thermal decomposition of MCs with its mechanism of flame retardancy was significantly studied using thermogravimetric analysis/infrared spectrometry (TG-IR). The strategy presented in this study should inspire the development of microcapsules with PCMs/flame retardants as hybrid core materials for structural applications.
RESUMEN
Polymeric materials are susceptible to the chain re-conformation, reorientation, slippage, and bond cleavage upon mechanical stimuli, which are likely to further grow into macro-damages and eventually lead to the compromise or loss of materials performance. Therefore, it is of great academic importance and practical significance to sensitively detect the local mechanical states in polymers and monitor the dynamic variations in polymer structures and properties under external forces. Mechanochromic fluorescent polymers (MFP) are a class of smart materials by utilizing sensitive fluorescent motifs to detect polymer chain events upon mechanical stimuli. Taking advantage of the unique aggregation-induced emission (AIE) effect, a variety of MFP systems that can self-report their mechanical states and mechano-induced structural and property changes through fluorescence signals have been developed. In this feature article, an overview of the recent progress on MFP systems enabled by AIE process is presented. The main design principles, including physically doping dispersed or microencapsulated AIE luminogens (AIEgens) into polymer matrix, chemically linking AIEgens in polymer backbones, and utilizing the clusterization-triggered emission of polymers containing nonconventional luminogens, are discussed with representative examples. Perspectives on the existing challenges and problems in this field are also discussed to guide future development.
Asunto(s)
Colorantes Fluorescentes , Polímeros , Fluorescencia , HumanosRESUMEN
Myopia is a serious sight-compromising condition in which decreases in scleral biomechanical strength are associated with protease up-regulation resulting in thinning of its collagenous framework and changes in the extracellular matrix composition. Matrix metallopeptidase (MMP)-2 is one of the known proteases mediating these alterations. To determine whether MMP-2 up-regulation precedes myopia development, the direct effects of gain and loss in Mmp2 gene function were evaluated on refractive development and form deprivation myopia in mice. Four weeks after injecting an adeno-associated virus serotype 8 packaged Mmp2 overexpression vector (AAV8-Mmp2), scleral MMP-2 up-regulation was accompanied by significant myopia in a normal visual environment. In contrast, AAV8 packaging with shRNA targeting Mmp2 inhibited rises in MMP-2 expression induced by form deprivation by 54% and reduced myopia development by 23% compared with eyes injected with an irrelevant scrambled sequence. Because opposing changes in MMP-2 protein expression levels had corresponding effects on myopia progression, up-regulation of this protease contributes to inducing this condition. This notion of a cause-and-effect relationship between MMP-2 up-regulation and myopia development is supported by showing that form-deprived myopia development was attenuated by 27% in fibroblast-specific Mmp2 deletion (S100a4creMmp2fl/fl) mice relative to Cre-negative littermates (Mmp2fl/fl). Therefore, MMP-2 is a potential drug target for inhibiting myopia progression.
Asunto(s)
Modelos Animales de Enfermedad , Fibroblastos/patología , Metaloproteinasa 2 de la Matriz/metabolismo , Miopía/patología , Esclerótica/enzimología , Animales , Progresión de la Enfermedad , Fibroblastos/enzimología , Masculino , Metaloproteinasa 2 de la Matriz/genética , Ratones , Ratones Endogámicos C57BL , Miopía/enzimología , Miopía/genética , Regulación hacia ArribaRESUMEN
Graphene/Co(OH)2 nanowire composite films were successfully synthesized using a simple three-step treatment, and the effect of the Co(OH)2 nanowire content on the electrochemical properties of the composite films was studied in this study. One-dimensional Co(OH)2 nanowires were homogeneously embedded and dispersed between the prepared graphene papers, forming a layered graphene/Co(OH)2 nanowire hybrid structure. These composite films exhibited better electrochemical properties than the previously reported graphene composites with carbon spheres such as graphene/CNT composites. These graphene composites were fabricated using the same method we used in this study but without the addition of Co(OH)2 nanowires. The addition of a small amount of Co(OH)2 to reduced graphene oxide (rGO) (RGO:Co(OH)2=5:1) yielded thick paper-like rGO/Co(OH)2 sandwiches, which showed an excellent specific capacitance of 1032.57 Fg-1 at a scan rate of 5 mVs-1. These results indicate the potential of these composites for the development of highly capacitive energy storage devices for practical applications.
RESUMEN
Thermally conductive composite materials were fabricated using Al2O3 and surface-modified MWCNTs on an ETDS matrix. The MWCNT surfaces were modified using a solution containing H2O2 and H2SO4/HNO3 and examined at various reaction times. After surface modification, the ratios of the functional groups introduced were compared. The changes in MWCNT morphology and thermal conductivity were also investigated for various reaction times. It was observed from the results that the MWCNTs exposed to 1 h acid treatment had the highest thermal conductivity without any decrease in their length. Based on the optimum oxidization of MWCNTs, further surface modification was performed using APTES, a silane coupling agent, using two different reactions. After the reaction, large particle aggregations were observed on the amine-terminated MWCNTs, which reacted with a mixture of EtOH and DI water. These agglomerates did not re-disperse after long-time sonication. However, the silanol-terminated MWCNTs were easily dispersed in EtOH via sonication, and their composite materials had outstanding thermal conductivities. Moreover, more amount of MWCNTs were processable using the same Al2O3 and ETDS concentrations, which also led to enhanced thermal conductivities compared to the other surface modification methods.
RESUMEN
Polyethylene glycol (PEG) based water-soluble polymer composites were fabricated for mineral admixture encapsulants to be used in underground sinkhole restoration. Linear low-density polyethylene (LLDPE) and talc were added to the composites to increase their mechanical strengths and heat resistances. PEG/LLDPE/Talc composites were manufactured via melt mixing using a twin extruder. Blending PEG and LLDPE increased the mechanical properties and heat resistances of the composite, but decreased the water solubility. Talc was added to the composite to increase mechanical properties and heat resistance. The addition of talc increased the water solubilities of PEG-based composites. The highest tensile strength and impact strength were 2.89 MPa and 2.86, respectively, the increase rate being 9.63-fold relative to that of pristine PEG.
RESUMEN
Hollow glass bubbles (HGBs) with through-holes at micron level were fabricated by etching them using diluted 1% hydrofluoric acid (HF) solution in a specially designed reaction system. In this study, the function of each component in the system was carefully investigated and improved to realise the controllable etching process. Various parameters were investigated to explore the optimal etching condition. Highest gross yield of about 85% and effective yield of about 50% were obtained at the optimised etching condition. A separating method was proposed to separate the etched HGBs with different hole sizes with the help of reduced pressure. After separation, HGBs with hole size at sub-micron level, less than 10 µm, and bigger than 10 µm, were achieved. The well-etched HGBs can be used as universal containers to store both reactive and inactive chemicals for applications in self-healing materials, biochemical engineering, and energy industry.
Asunto(s)
Vidrio/química , Ácido Fluorhídrico/química , Ensayo de Materiales , Porosidad , Propiedades de SuperficieRESUMEN
The present study was performed to investigate the effect of resveratrol (trans-3,4',5-trihydroxystilbene) present as a natural phytoalexin in grapes, peanuts, and red wine on oral squamous cancer cell lines, SCC-VII, SCC-25, and YD-38. MTS assay and flow cytometry, respectively, were used for the analysis of inhibition of cell proliferation and apoptosis. Western blot analysis was performed to examine the effect of resveratrol on the expression of proteins associated with cell cycle regulation. The results revealed a concentration- and time-dependent inhibition of proliferation in all the three tested cell lines on treatment with resveratrol. The IC50 of resveratrol for SCC-VII, SCC-25, and YD-38 cell lines was found to be 0.5, 0.7, and 1.0 µg/ml, respectively, after 48-h treatment. Examination of the cell cycle analysis showed that resveratrol treatment induced cell cycle arrest in the G2/M phase and enhanced the expression of phospho-cdc2 (Tyr 15), cyclin A2, and cyclin B1 in the oral squamous cell carcinoma (OSCC) cells. It also caused a marked increase in the percentage of apoptotic cells as revealed by the fluorescence-activated cell sorting analysis. Thus, resveratrol exhibits inhibitory effect on the proliferation of OSCC oral cancer cells through the induction of apoptosis and G2/M phase cell cycle arrest.
Asunto(s)
Apoptosis/efectos de los fármacos , Carcinoma de Células Escamosas/tratamiento farmacológico , Puntos de Control de la Fase G2 del Ciclo Celular/efectos de los fármacos , Puntos de Control de la Fase M del Ciclo Celular/efectos de los fármacos , Neoplasias de la Boca/tratamiento farmacológico , Estilbenos/farmacología , Carcinoma de Células Escamosas/patología , Línea Celular Tumoral , Proliferación Celular/efectos de los fármacos , Humanos , Neoplasias de la Boca/patología , ResveratrolRESUMEN
Mechanochemical transduction enables an extraordinary range of physiological processes such as the sense of touch, hearing, balance, muscle contraction, and the growth and remodelling of tissue and bone. Although biology is replete with materials systems that actively and functionally respond to mechanical stimuli, the default mechanochemical reaction of bulk polymers to large external stress is the unselective scission of covalent bonds, resulting in damage or failure. An alternative to this degradation process is the rational molecular design of synthetic materials such that mechanical stress favourably alters material properties. A few mechanosensitive polymers with this property have been developed; but their active response is mediated through non-covalent processes, which may limit the extent to which properties can be modified and the long-term stability in structural materials. Previously, we have shown with dissolved polymer strands incorporating mechanically sensitive chemical groups-so-called mechanophores-that the directional nature of mechanical forces can selectively break and re-form covalent bonds. We now demonstrate that such force-induced covalent-bond activation can also be realized with mechanophore-linked elastomeric and glassy polymers, by using a mechanophore that changes colour as it undergoes a reversible electrocyclic ring-opening reaction under tensile stress and thus allows us to directly and locally visualize the mechanochemical reaction. We find that pronounced changes in colour and fluorescence emerge with the accumulation of plastic deformation, indicating that in these polymeric materials the transduction of mechanical force into the ring-opening reaction is an activated process. We anticipate that force activation of covalent bonds can serve as a general strategy for the development of new mechanophore building blocks that impart polymeric materials with desirable functionalities ranging from damage sensing to fully regenerative self-healing.
RESUMEN
Structural health monitoring (SHM) requires efficient online crack detection and characterization to prevent structural failures, which mainly arise from fatigue cracks. Existing solutions for crack characterization involve analyzing sensed wave signals directly, but these approaches usually require onerous steps or many sensors to obtain sufficient and clear wave packets. An alternative strategy is a model-based inversion, which takes the full waveform into consideration and does not require analysis on a single wave packet. This approach can achieve accurate characterization with fewer sensors and simpler implementation. We propose an efficient model based on the Huygens' principle and the no-mode-conversion property of the A0 mode Lamb waves to meet the requirements of online monitoring. We then verify the proposed model-based crack imaging method through simulation and experiments on smooth and rough cracks. The proposed method is easy, cheap, and efficient, making it a desirable option for SHM tasks.
RESUMEN
Photosensitizers (PSs) with aggregation-induced emission (AIE) characteristics are competitive candidates for bioimaging and therapeutic applications. However, their short emission wavelength and nonspecific organelle targeting hinder their therapeutic effectiveness. Herein, a donor-acceptor modulation approach is reported to construct a series of ionic AIE photosensitizers with enhanced photodynamic therapy (PDT) outcomes and fluorescent emission in the second near-infrared (NIR-II) window. By employing dithieno[3,2-b:2',3'-d]pyrrole (DTP) and indolium (In) as the strong donor and acceptor, respectively, the compound DTP-In exhibits a substantial redshift in absorption and fluorescent emission reach to NIR-II region. The reduced energy gap between singlet and triplet states in DTP-In also increases the reactive oxygen species (ROS) generation rate. Further, DTP-In can self-assemble in aqueous solutions, forming positively charged nanoaggregates, which are superior to conventional encapsulated nanoparticles in cellular uptake and mitochondrial targeting. Consequently, DTP-In aggregates show efficient photodynamic ablation of 4T1 cancer cells and outstanding tumor theranostic in vivo under 660 nm laser irradiation. This work highlights the potential of molecular engineering of donor-acceptor AIE PSs with multiple functionalities, thereby facilitating the development of more effective strategies for cancer therapy.
Asunto(s)
Rayos Infrarrojos , Fotoquimioterapia , Fármacos Fotosensibilizantes , Especies Reactivas de Oxígeno , Fármacos Fotosensibilizantes/química , Fármacos Fotosensibilizantes/farmacología , Especies Reactivas de Oxígeno/metabolismo , Fotoquimioterapia/métodos , Animales , Ratones , Línea Celular Tumoral , Humanos , Indoles/química , Indoles/farmacología , Nanopartículas/química , Pirroles/química , Pirroles/farmacologíaRESUMEN
Background: Restoration of blood supply is a desired goal for the treatment of acute ischemic stroke. However, the restoration often leads to cerebral ischemia-reperfusion injury (CIR/I), which greatly increases the risk of non-neural organ damage. In particular, the acute kidney injury might be one of the most common complications. Aims: The study aimed to understand the damage occurred and the potential molecular mechanisms. Methods: The study was explored on the CIR/I rats generated by performing middle cerebral artery occlusion/reperfusion (MCAO/Reperfusion). The rats were evaluated with injury on the brains, followed by the non-neural organs including kidneys, livers, colons and stomachs. They were examined further with histopathological changes, and gene expression alterations by using RT-qPCR of ten aquaporins (Aqps) subtypes including Aqp1ï½Aqp9 and Aqp11. Furthermore, the Aqps expression profiles were constructed for each organ and analyzed by performing Principle Component Analysis. In addition, immunohistochemistry was explored to look at the protein expression of Aqp1, Aqp2, Aqp3 and Aqp4 in the rat kidneys. Results: There was a prominent down-regulation profile in the MCAO/Reperfusion rat kidneys. The protein expression of Aqp1, Aqp2, Aqp3 and Aqp4 was decreased in the kidneys of the MCAO/Reperfusion rats. We suggested that the kidney was in the highest risk to be damaged following the CIR/I. Down-regulation of Aqp2, Aqp3 and Aqp4 was involved in the acute kidney injury induced by the CIR/I.
RESUMEN
The application of solar-thermal surfaces for antifrosting and defrosting has emerged as a passive and environmentally friendly approach to mitigate the negative consequences of frost formation, such as structural damage and reduced heat transfer efficiency. However, achieving robust all-day frostphobicity solely through interfacial modification and solar-thermal effects is challenging in practical applications: The thick frost that accumulates at night strongly scatters solar radiation, rendering the solar-thermal coatings ineffective during the daytime. Additionally, these nanostructured coatings are susceptible to wear and tear when exposed to the outdoors for extended periods of time. To address these challenges, we present an innovative frostphobic surface that incorporates V-grooved structures with superhydrophobic solar-thermal layers (VSSs). The out-of-plane gradient structures facilitate spatially regulated vapor diffusion, an enhanced photothermal effect, and robust water repellency. These features not only prevent frost from covering the entire surface overnight, enabling effective solar-thermal defrosting during the daytime, but also protect the surface from deterioration. The combined merits ensure robust all-day frostphobicity and exceptional durability, making the VSS surface promising for practical applications and extending the lifespan in extreme environments.