RESUMEN
The experimental demonstrations of light-emitting diode (LED) fabrication with surface plasmon (SP) coupling with the radiating dipoles in its quantum wells are first reviewed. The SP coupling with a radiating dipole can create an alternative emission channel through SP radiation for enhancing the effective internal quantum efficiency when the intrinsic non-radiative recombination rate is high, reducing the external quantum efficiency droop effect at high current injection levels, and producing partially polarized LED output by inducing polarization-sensitive SP for coupling. Then, we report the theoretical and numerical study results of SP-dipole coupling based on a simple coupling model between a radiating dipole and the SP induced on a nearby Ag nanoparticle (NP). To include the dipole strength variation effect caused by the field distribution built in the coupling system (the feedback effect), the radiating dipole is represented by a saturable two-level system. The spectral and dipole-NP distance dependencies of dipole strength variation and total radiated power enhancement of the coupling system are demonstrated and interpreted. The results show that the dipole-SP coupling can enhance the total radiated power. The enhancement is particularly effective when the feedback effect is included and hence the dipole strength is increased.
RESUMEN
The implementation of a series of optically pumped GaN photonic crystal (PhC) membrane lasers is demonstrated at room temperature. The photonic crystal is composed of a scalene-triangular arrangement of circular holes in GaN. Three defect structures are fabricated for comparing their lasing characteristics with those of perfect PhC. It is observed that all the lasing defect modes have lasing wavelengths very close to the band-edge modes in the perfect PhC structure. Although those lasing modes, including band-edge and defect modes, have different optical pump thresholds, different lasing spectral widths, different quality factors (Q factors), and different polarization ratios, all their polarization distributions show maxima in the directions around one of the hole arrangement axes. The similar lasing characteristics between the band-edge and defect modes are attributed to the existence of extremely narrow partial band gaps for forming the defect modes. Also, the oriented polarization properties are due to the scalene-triangle PhC structure. In one of the defect lasing modes, the lasing threshold is as low as 0.82 mJ cm(-2), the cavity Q factor is as large as 1743, and the polarization ratio is as large as 25.4. Such output parameters represent generally superior lasing behaviors when compared with previously reported implementations of similar laser structures.
RESUMEN
The output enhancement of a green InGaN/GaN quantum-well (QW) light-emitting diode (LED) through the coupling of a QW with localized surface plasmons (LSPs), which are generated on Ag nanostructures on the top of the device, is demonstrated. The suitable Ag nanostructures for generating LSPs of resonance energies around the LED wavelength are formed by controlling the Ag deposition thickness and the post-thermal-annealing condition. With a 20 mA current injected onto the LED, enhancements of up to 150% in electroluminescence peak intensity and of 120% in integrated intensity are observed. By comparing this with a similar result for a blue LED previously published, it is confirmed that surface plasmon coupling for emission enhancement can be more effective for an InGaN/GaN QW of lower crystal quality, which normally corresponds to the emission of a longer wavelength.
RESUMEN
We demonstrate the variations of the photoluminescence (PL) spectral peak position and intensity through the surface plasmon (SP) coupling with an InGaN/GaN quantum well (QW) by forming Ag nanostructures of different scale sizes on the QW structure with thermal annealing. By transferring an Ag thin film into a nanoisland structure, we can not only enhance the PL intensity, but also adjust the SP dispersion relation and hence red-shift the effective QW emission wavelength. Such an emission spectrum control can be realized by initially coating Ag films of different thicknesses. Although the screening process of the quantum-confined Stark effect, which can result in PL spectrum blue-shift and intensity enhancement, also contributes to the variations of the emission behaviour, it is found that the SP-QW coupling process dominates in the observed phenomena.