Atomic-Dispersed Cu Catalysts for Electrochemical Nitrate Reduction: Coordination Engineering and Fundamental Insights.

The development of Cu-based atomic dispersed catalysts with tailored coordination environments represents a significant step forward in enhancing the electrocatalytic reduction of nitrate to ammonia. By precisely modulating the electronic structures of Cu active centers, the binding strength of the *NO3 intermediates is successfully tuned, thereby substantially improving the catalytic activity toward electrochemical nitrate reduction reaction (eNO3RR). This study reveals that the N4-coordinated Cu single-atom catalyst (Cu-SAC) exhibits superior performance due to its robust interaction with coordinating atoms. Notably, this optimized catalyst achieves a low limiting potential of -0.38 V, while the dual-atom system further reduces this value to -0.32 V, demonstrating exceptional activity. Detailed electronic structure analysis, including the examination of d-band centers, Bader charges, and projected density of states (PDOS), provides a comprehensive understanding of the origin of this high activity. Specifically, the high and concentrated density of states near the Fermi level plays a crucial role in facilitating the electrocatalytic nitrate reduction process. This work not only offers crucial insights into the underlying mechanisms of eNO3RR but also provides valuable guidelines for the rational design of highly efficient electrocatalysts for this important reaction.

Recycled Cathodes in Rechargeable Aqueous Batteries as Ready-Made Electrodes for Oxygen Evolution Catalysis.

The development of a low-cost and efficient oxygen evolution reaction (OER) electrode is of critical importance for water electrolysis technologies. The general approach to achieving a high-efficiency OER electrode is to regulate catalytic material structures by synthetic control. Here we reported an orthogonal approach to obtaining the OER electrode without intentional design and synthesis, namely, recycling MnO2 cathodes from failed rechargeable aqueous batteries and investigating them as ready-made catalytic electrodes. The recycled MnO2 cathode showed very little Zn2+ storage capacity but surprisingly high OER activity with a low overpotential of 307 mV at 10 mA cm-2 and a small Tafel slope of 77.9 mV dec-1, comparable to the state-of-the-art RuO2 catalyst (310 mV, 86.9 mV dec-1). In situ electrochemical and theoretical studies jointly revealed that the accelerated OER kinetics of the recycled MnO2 electrode was attributed to the enlarged active surface area of MnO2 and optimized electronic structure of Mn sites. This work suggests failed battery cathodes as successful catalysis electrodes for sustainable energy development.

Growth Modulation of High-Entropy Alloys for Electrocatalytic Methanol Oxidation Reaction.

High-entropy alloy (HEA) electrocatalysts have exhibited remarkable catalytic performance because of their synergistic interactions among multiple metals. However, the growth mechanism of HEAs remains elusive, primarily due to the constraints imposed by the current synthesis methodologies for HEAs. In this work, an innovative electrodeposition method was developed to fabricate Pt-based nanocomposites (Pt1Bi2Co1Cu1Ni1/CC), comprising HEA nanosheets and carbon cloths (CCs). The reaction system could be effectively monitored by taking samples out from the system during the reaction process, facilitating in-depth insight into the growth mechanism underlying the material formation. In particular, Pt1Bi2Co1Cu1Ni1/CC nanocomposites show superior methanol oxidation reaction (MOR) performance (mass activity up to 5.02 A mgPt-1). Upon structural analysis, the d-band center of Pt1Bi2Co1Cu1Ni1/CC is lower in comparison with that of Pt1Bi2/CC and Pt/CC, demonstrating the formation of a rich-electron structure. Both the uniformity of HEAs and the carbon-supported effect could provide additional active sites. These findings suggest that the strong electronic interaction within HEAs and additional active sites can effectively modulate the catalytic structure of Pt, which benefits the enhanced CO tolerance and MOR performance.

Precise Construction of the Triple-Phase Boundary and Its Antiphosphate Poisoning Effect in the Confined Region.

As a critical component for the oxygen reduction reaction (ORR), platinum (Pt) catalysts exhibit promising catalytic performance in High-temperature-proton exchange membrane fuel cells (HT-PEMFCs). Despite their success, HT-PEMFCs primarily utilize phosphoric acid-doped polybenzimidazole (PA-PBI) as the proton exchange membrane, and the phosphoric acid within the PBI matrix tends to leach onto the Pt-based layers, easily causing toxicity. Herein, we first propose UiO-66@Pt3Co1-T composites with precisely engineered interfacial structures. The UiO-66@Pt3Co1-T exhibits an octahedral porous framework with uniform structural dimensions and even distribution of surface nanoparticles, which demonstrate superior ORR performance compared to commercial Pt/C. The unique structure and morphology of the composites also exhibit a favorable half-wave potential in different concentrations of phosphoric acid electrolyte, regulated by the phosphoric acid adsorption site and intensity.This finding suggests that the incorporation of Co could effectively modulate the Pt d-band center, thereby enhancing the ORR performance. Furthermore, the selective adsorption of phosphoric acid by ZrO2 enables precise control over the phosphoric acid distribution. Notably, the retention of the octahedral framework post high-temperature treatment facilitates the establishment of dual transport pathways for gases and protons, leading to a stable and efficient triple-phase boundary.

Nanoporous Nickel Cathode with an Electrostatic Chlorine-Resistant Surface for Industrial Seawater Electrolysis Hydrogen Production.

Seawater electrolysis presents a promising avenue for green hydrogen production toward a carbon-free society. However, the electrode materials face significant challenges including severe chlorine-induced corrosion and high reaction overpotential, resulting in low energy conversion efficiency and low current density operation. Herein, we put forward a nanoporous nickel (npNi) cathode with high chlorine corrosion resistance for energy-efficient seawater electrolysis at industrial current densities (0.4-1 A cm-2). With the merits of an electrostatic chlorine-resistant surface, modulated Ni active sites, and a robust three-dimensional open structure, the npNi electrode showed a low hydrogen evolution reaction overpotential of 310 mV and a high electricity-hydrogen conversion efficiency of 59.7% at 400 mA cm-2 in real seawater and outperformed most Ni-based seawater electrolysis cathodes in recent publications and the commercial Ni foam electrode (459 mV, 46.4%) under the same test condition. In situ electrochemical impedance spectroscopy, high-frame-rate optical microscopy, and first-principles calculation revealed that the improved corrosion resistance, enhanced intrinsic activity, and mass transfer were responsible for the lowered electrocatalytic overpotential and enhanced energy efficiency.

The Role of Bismuth in Suppressing the CO Poisoning in Alkaline Methanol Electrooxidation: Switching the Reaction from the CO to Formate Pathway.

While tuning the electronic structure of Pt can thermodynamically alleviate CO poisoning in direct methanol fuel cells, the impact of interactions between intermediates on the reaction pathway is seldom studied. Herein, we contrive a PtBi model catalyst and realize a complete inhibition of the CO pathway and concurrent enhancement of the formate pathway in the alkaline methanol electrooxidation. The key role of Bi is enriching OH adsorbates (OHad) on the catalyst surface. The competitive adsorption of CO adsorbates (COad) and OHad at Pt sites, complementing the thermodynamic contribution from alloying Bi with Pt, switches the intermediate from COad to formate that circumvents CO poisoning. Hence, 8% Bi brings an approximately 6-fold increase in activity compared to pure Pt nanoparticles. This notion can be generalized to modify commercially available Pt/C catalysts by a microwave-assisted method, offering opportunities for the design and practical production of CO-tolerance electrocatalysts in an industrial setting.

Orderly Coating of Bilayer Polymer to Tailor Microenvironment for Efficient C-N Coupling Toward Highly Selective Urea Electrosynthesis.

Electrosynthesis of urea from co-reduction of carbon dioxide and nitrate is a promising alternative to the industrial process. However, the overwhelming existence of proton and nitrate as well as the insufficient supply of CO2 at the reaction interface usually result in complex product distributions from individual nitrate reduction or hydrogen evolution, instead of C-N coupling. In this work, we systematically optimize this microenvironment through orderly coating of bilayer polymer to specifically tackle the above challenges. Polymer of intrinsic microporosity is chosen as the upper polymer to achieve physical sieving, realizing low water diffusivity for suppressing hydrogen evolution and high gas permeability for smooth mass transfer of CO2 at the same time. Polyaniline with abundant basic amino groups is capable of triggering chemical interaction with acidic CO2 molecules, so that is used as the underlying polymer to serve as CO2 concentrator and facilitate the carbon source supply for C-N coupling. Within this tailored microenvironment, a maximum urea generation yield rate of 1671.6 µg h-1 mg-1 and a high Faradaic efficiency of 75.3% are delivered once coupled with efficient electrocatalyst with neighboring active sites, which is among the most efficient system of urea electrosynthesis.

Confinement Effects in Carbonized ZIF-Confined Hollow PtCo Nanospheres Enable the Methanol Oxidation Reaction.

Confinement effects in highly porous nanostructures can effectively adjust the selectivity and kinetics of electrochemical reactions, which can boost the methanol oxidation reaction (MOR). In this work, carbonized ZIF-8-confined hollow PtCo nanospheres (PtCo@carbonized ZIF-8) were fabricated using a facile strategy. A monodisperse confined region was successfully prepared, and the dispersion of the PtCo nanoparticles (NPs) could be precisely regulated, allowing for the effective tuning of the confined region. Thus, the precise regulation of the catalytic reaction was achieved. Importantly, hollow PtCo NPs were prepared using a method based on the Kirkendall effect, and their forming mechanism was systematically investigated. Because of the confinement effects of carbonized zeolitic imidazolate framework-8 (ZIF-8), the crystal and electronic structures of the PtCo NPs were able to be effectively tuned. Our electrochemical results show that PtCo@carbonized ZIF-8 composites manifest a higher mass activity (1.4 A mgPt-1) and better stability compared to commercial Pt/C.

Electrodeposition-Assisted Crystal Growth Regulation of PdBi Clusters on Carbon Cloths for Ethanol Oxidation.

Carbon-supported Pd-based clusters are one of the most promising anodic catalysts for ethanol oxidation reaction (EOR) due to their encouraging activity and practical applications. However, unclear growth mechanism of Pd-based clusters on the carbon-based materials has hindered their extensive applications. Herein, we first introduce multi-void spherical PdBi cluster/carbon cloth (PdBi/CC) composites by an electrodeposition routine. The growth mechanism of PdBi clusters on the CC supports has been systemically investigated by evaluating the selected samples and tuning their compositions, which involve the big difference in standard redox potential between Pd2+/Pd and Bi3+/Bi and easy adsorption of Bi3+ on the surface of Pd-rich seeds. Benefitting from the ensembles of many nanocrystal subunits, multi-void spherical PdBi clusters can present collective properties and novel functionalities. In addition, the outstanding characteristics of CC supports enable PdBi clusters with stable nanostructures. Thanks to the unique structure, Pd20Bi/CC catalysts manifest higher EOR activity and better stability compared to Pd/CC. Systematic characterizations and a series of CO poisoning tests further confirm that the dramatically enhanced EOR activity and stability can be attributed to the incorporation of Bi species and the strong coupling of the structure between PdBi clusters and CC supports.

One Stone Two Birds: Unlocking the Synergy between Amorphous Ni(OH)2 and Pd Nanocrystals toward Ethanol and Formic Acid Oxidation.

Even though extensive efforts have been devoted to mixing Pd nanocrystals with Ni(OH)2 for the enhanced synergy, it remains a great challenge to incorporate nanosized Ni(OH)2 species on the Pd electrode and reveal their synergy. Herein, we present spongelike Pd nanocrystals with the modification of amorphous Ni(OH)2 species. The catalyst configuration is first considered by compositing Pd with Ni(OH)2 species to optimize the Pd-Pd interatomic distance and then constructing a strongly coupled interface between Pd nanostructures and Ni(OH)2 species. For the ethanol oxidation reaction (EOR) and the formic acid oxidation reaction (FAOR), Pd-Ni(OH)2 composites exhibit an impressive mass activity of 4.98 and 2.65 A mgPd-1, respectively. Most impressively, there is no significant decrease in the EOR activity during five consecutive cycles (50 000 s). A series of CO-poisoning tests have proved that the enhanced EOR and FAOR performances involve synergy between Pd nanostructures and Ni(OH)2 species.

Mechanism of enhanced production of triterpenoids in algal-fungal consortium.

Chlorella pyrenoidosa-Ganoderma lucidum symbiotic systems were constructed. The mechanism of enhanced production of triterpenoids in algal-fungal consortium by comparing the contents of triterpenoids in individual fungal systems and algal-fungal consortium systems was investigated. The production of triterpenoids in C. pyrenoidosa-G. lucidum consortium increased significantly (P < 0.05). The categories and relative abundances of metabolites in the individual systems and algal-fungal systems were measured and analyzed by metabonomic tests. There were 57 significant different metabolites (VIP > 1 and P < 0.05) including 12 downregulated metabolites and 45 upregulated metabolites were obtained. The significant enriched metabolic pathways (VIP > 1 and P < 0.05) of citrate cycle (TCA cycle), tyrosine metabolism, glycolysis, and terpenoid backbone biosynthesis in algal-fungal consortium were obtained. The relative abundances of important precursors of triterpenoids including mevalonic acid, lanosterol, and hydroquinone were 1.4 times, 1.7 times, and 2 times, respectively, in algal-fungal consortium than that in the individual fungal systems. The presence of C. pyrenoidosa in algal-fungal consortium promoted the biosynthesis of triterpenoids in G. lucidum.

Pillar[5]arene-Based [2]Rotaxane: Synthesis, Characterization, and Application in a Coupling Reaction.

Mechanically interlocked molecules are a class of smart supramolecular species because of their interesting topological structure and application in various areas, such as biology and nanoscience. In this work, we used "multicomponent reaction" to fabricate a new [2]rotaxane based on pillar[5]arene from different small-sized molecules. The molecular structure of the obtained [2]rotaxane R was confirmed by 1H and 13C NMR, high-resolution electrospray ionization mass spectrometry, two-dimensional nuclear Overhauser effect spectroscopy, and density functional theory studies. Interestingly, the [2]rotaxane-based organometallic cross-linked catalyst (Pd@R) was easily constructed via the coordination between triazole groups and Pd(NO3)2. Pd@R proved to be a good catalyst for the Suzuki-Miyaura coupling reaction with excellent stability and repeatability.

Bi(OH)3/PdBi Composite Nanochains as Highly Active and Durable Electrocatalysts for Ethanol Oxidation.

Developing high-performance electrocatalysts for the ethanol oxidation reaction (EOR) is critical to the commercialization of direct ethanol fuel cells. However, current EOR catalysts suffer from high cost, low activity, and poor durability. Here we report the preparation of PdBi-Bi(OH)3 composite nanochains with outstanding EOR activity and durability. The incorporation of Bi can tune the electronic structure and downshift the d-band center of Pd while the surface decoration of Bi(OH)3 can facilitate the oxidative removal of CO and other carbonaceous intermediates. As a result, the nanochains manifest an exceptional mass activity (5.30 A mgPd-1, 4.6-fold higher than that of commercial Pd/C) and outstanding durability (with a retained current density of ∼1.00 A mgPd-1 after operating for 20 000 s). More importantly, the nanochain catalyst can be reactivated, and negligible activity loss has been observed after operating for 200 000 s with periodic reactivation, making it one of the best EOR catalysts.

An Integrated CO2 Electrolyzer and Formate Fuel Cell Enabled by a Reversibly Restructuring Pb-Pd Bimetallic Catalyst.

A single device combining the functions of a CO2 electrolyzer and a formate fuel cell is a new option for carbon-neutral energy storage but entails rapid, reversible and stable interconversion between CO2 and formate over a single catalyst electrode. We report a new catalyst with such functionalities based on a Pb-Pd alloy system that reversibly restructures its phase, composition, and morphology and thus alters its catalytic properties under controlled electrochemical conditions. Under cathodic conditions, the catalyst is relatively Pb-rich and is active for CO2 -to-formate conversion over a wide potential range; under anodic conditions, it becomes relatively Pd-rich and gains stable catalytic activity for formate-to-CO2 conversion. The bifunctional activity and superior durability of our Pb-Pd catalyst leads to the first proof-of-concept demonstration of an electrochemical cell that can switch between the CO2 electrolyzer/formate fuel cell modes and can stably operate for 12 days.

Effect of Zishenpingchan granule prepared from Chinese medicinal substances on the c-Jun N-terminal protein kinase pathway in mice with Parkinson's disease induced by 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine.

OBJECTIVE: To investigate the regulatory mechanism of the c-Jun N-terminal protein kinase (JNK) signaling pathway in substantia nigra (SN) dopaminergic neurons inflammation and apoptosis, and the neuroprotective effect of Zishenpingchan granules in mice with Parkinson's disease (PD) induced by 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP). METHODS: PD model mice were established by intraperitoneally injecting MPTP. Sixty mice were divided into a model group, Traditional Chinese Medicine (TCM) group and control group. The mice of the TCM group were administered Zishenpingchan granules 7 days before PD induction. Seven days after PD induction, we examined locomotor activity, and performed the rotarod test and swimming test, to evaluate limb movement function. Furthermore, we used immunohistochemistry and western blotting to examine the expression of tyrosine hydroxylase (TH), cyclooxygenase-2 (Cox-2), caspase-3 and p-JNK. The terminal deoxynucleotidyl transferase mediated dUTP nick end labeling (TUNEL) method was used to examine neuron apoptosis in the SN. RESULTS: Compared with the control group, the mean score of locomotor activity, rotarod test and swimming test was significantly lower in the model group (P < 0.05); the TH-positive neuron expression was significantly decreased in the SN pars compacta (SNpc); the protein expression levels of Cox-2, caspase-3 and p-JNK was obviously increased; and the number of TUNEL-positive neurons in the SN was increased (P < 0.01). Compared with the model group, the mean score of neurobehavioral tests in the TCM group was obviously higher, the loss of TH-positive neurons ignificantly decreased, the protein expression levels of Cox-2, caspase-3 and p-JNK obviously decreased, and the number of TUNEL- positive neurons in the SN clearly decreased (P < 0.01). CONCLUSION: The JNK pathway plays an important role in the regulation of inflammation and apoptosis in nigral cells in PD mice. TCM can suppress the over-activation of the JNK pathway in the SN, and alleviate the inflammatory response in nigral cells and dopaminergic neuron apoptosis in PD mice.

Efficacy of Zhenjingdingzhi decoction in treating insomnia with Qi-deficiency of heart and gallbladder: a randomized, double-blind, controlled trial.

OBJECTIVE: To evaluate the clinical efficacy of Zhenjingdingzhi decoction in treating insomnia with Qi-deficiency of heart and gallbladder. METHODS: We conducted a double-blind, randomized, controlled trial involving 100 patients with insomnia of Qi-deficiency of heart and gallbladder. Patients were randomly divided into the treatment group (n = 50) and the control group (n = 50) according to a random number table. The treatment group was given Zhenjingdingzhi decoction, while the control group was treated with Suanzaoren decoction. The pharmacological treatment lasted for 8 weeks. The clinical efficacy was assessed by using Spiegel scale, Pittsburgh sleep quality index (PSQ) and Traditional Chinese Medicine (TCM) syndrome scores. RESULTS: Comparing Spiegel scores between the two groups at 4 and 8 weeks, the differences in curative effect between the two groups were both significant (both P < 0.05). The total effective rate was 46% in the treatment group and 27.7% in the control group at 4 weeks, and 80% and 53.2% at 8 weeks, respectively; After 8 weeks, PSQI scores showed that the total effective rates differed significantly between the two groups (P < 0.01): 84% in the treatment group and 59.6% in the control group; In improving sleep quality and sleep duration, the curative effect of the treatment group was better than that of the control group (P < 0.05). TCM syndrome, especially insomnia and palpitation, was improved better in the treatment group after 8 weeks as compared to that in the control group (P < 0.05). The total effective rate of the two groups was 84% and 66%, respectively. CONCLUSION: Zhenjingdingzhi decoction is effective and safe for the treatment of insomnia with Qi-deficiency of heart and gallbladder, especially for improving sleep quality and sleep duration.

Rational Linker Design for Enhanced Performance of MOF-Derived Catalysts in Electrochemical Urea Synthesis.

2D metal-organic frameworks (2D MOFs) offer promising electrocatalytic potential for urea synthesis, yet the underlying reaction mechanisms and structure-activity relationships remain unclear. Using Cu-BDC as a model, density functional theory (DFT) calculations to elucidate these aspects are conducted. The results reveal a novel coupling mechanism involving *NO─CO and *NO─*ONCO, emphasizing the impact of linker modifications on Cu spin states and charge distribution. Notably, Cu-BDC-NH2 and Cu─BDC─OH emerge as promising catalysts. Additionally, structure-activity relationships through descriptors like d-band center, IE ratio, and L(Cu─O), providing insights for rational catalyst design is established. These findings pave the way for optimized catalysts and sustainable urea production, opening avenues for future research and technological advancements.

Triggering Heteroatom Ensemble Effect over RuFe Alloy to Promote Nitrogen Chemisorption for Efficient Ammonia Electrosynthesis at Ambient Conditions.

Ammonia (NH3) electrosynthesis from nitrogen (N2) provides a promising strategy for carbon neutrality, circumventing the energy-intensive and carbon-emitting Haber-Bosch process. However, the current system still presents unsatisfactory performance, and the bottleneck lies in the rational synthesis of catalytic centers with efficient N2 chemisorption ability. Herein, a heteroatom ensemble effect is deliberately triggered over RuFe alloy with spatial proximity of metal sites to promote electrocatalytic nitrogen reduction. The heteronuclear RuFe ensemble with increased surface polarization and modulated electronic structure offers the feasibility to optimize the adsorption configuration of electroactive substances and facilitate chemical bond scission. The promotion of N2 chemisorption and the following hydrogenation are demonstrated by the in situ Fourier transform infrared spectroscopy characterizations. The catalyst thus permits significantly enhanced conversion of N2 to NH3 in a 0.1 M HCl environment, with a maximum ammonia yield rate of 75.45 µg h-1 mg-1 and a high Faradaic efficiency of 35.49%.

Rare-Earth Lanthanum-Evoked Amorphization and Optimization to Boost Ambient Nitrogen Fixation over Single-Atom Catalysts.

Single-atom catalysts (SACs) have been widely studied in a variety of electrocatalysis. However, its application in the electrocatalytic nitrogen reduction reaction (NRR) field still suffers from unsatisfactory performance, due to the sluggish mass transfer and significant kinetic barriers. Herein, a novel rare-earth-lanthanum-evoked optimization strategy is proposed to boost ambient NRR over SACs. The incorporation of La with a large atomic radius tends to break the atomic long-range order and trigger the amorphization of SACs, endowing a greater density of dangling bonds that could modify affinity for reactants and adsorbates. Moreover, with unique 5d16s2 valence-electron configurations, its presence could further enrich the electron density and enhance the intrinsic activity of single-metal center via the valence orbital coupling. As expected, the La-modified catalyst presents excellent activity toward the electrochemical NRR, delivering a maximum ammonia yield rate of 33.91 µg h-1 mg-1 and a remarkable Faradaic efficiency of 53.82%.

Fast-charging aqueous batteries enabled by a three-dimensional ordered Zn anode at deliberate concentration polarization.

A finely controlled concentration polarization environment was deliberately created to fabricate a three-dimensional ordered Zn metal anode with (002)-dominated planes, which enabled a high-rate aqueous Ni-Zn pouch cell with a high discharge capacity of 187.3 mA h g-1 at 50 C, and a capacity retention of 94.7% and an average Coulombic efficiency of 99.8% for 500 charge/discharge cycles.